initial commit

2026-08-27 11:22:11 -06:00
commit 023cb3f8f4
8 changed files with 561 additions and 0 deletions
@@ -0,0 +1,75 @@
+ ______                              
+(_____ \                             
+ _____) )_____ ____   ____ ___   ___ 
+|  __  /| ___ |    \ / ___) _ \ /___)
+| |  \ \| ____| | | ( (__| |_| |___ |
+|_|   |_|_____)_|_|_|\____)___/(___/ 
+
+© BreakingSecurity.net
+	
+	
+************************
+* Zip Password         *
+************************
+
+Zip Password is: BreakingSecurity.net
+
+************************
+* License Activation   *
+************************
+
+To activate your Remcos Professional Edition license
+(not needed for Remcos Free Edition):
+
+1) Open KeyGen.exe
+2) Insert your BreakingSecurity.net registration email and password
+3) Click "Generate Key"
+4) Click "Activate Key"
+5) License is activated automatically and immediately.
+   You should receive a confirmation email within a minute.
+
+************************
+* Quick Setup          *
+************************
+
+This brief guide will help you out in establishing a successful connection using Remcos.
+
+For more in-depth instructions, consult:
+
+Instruction Manual:
+https://BreakingSecurity.net/remcos/manual
+
+VideoTutorials:
+https://BreakingSecurity.net/tutorials
+
+Support:
+https://BreakingSecurity.net/support
+
+
+1) INSTALL REMCOS
+   Remcos is portable and does not require an installation.
+   Just extract Remcos.exe file in any folder and execute it.
+   Zip Password is: BreakingSecurity.net
+   If later on you download a new Remcos update and want to keep all your settings,
+   just place the new Remcos.exe in the same folder.
+
+2) OPEN LISTENING PORT
+   The first step to do is open a TCP port for Remcos Controller.
+   This port will be used to listen for incoming connections.
+   Go to Local Settings -> Connection 
+   to add a listening port.
+   Make sure your firewall allows Remcos connection.
+   
+3) SETUP AGENT CONNECTION
+   Go to Agent Builder -> Connection 
+   to specify where your Remcos Agent should connect.
+   You should enter the IP or DNS address and listening port of your Remcos Controller here.
+
+4) BUILD AGENT
+   Go to Agent Builder -> Build
+   to build a Remcos Agent.
+   Deploy the agent to the remote system and execute it.
+
+5) ESTABLISH CONNECTION
+   If the above steps were correctly done, 
+   your new Remcos connection will popup in the Connections tab.