* Added opcode definitions for read/write-16 and the extended "read capacity 16"
over service-action-in. * Minor cleanup. git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@36415 a95241bf-73f2-0310-859d-f6bbb57e9c96
This commit is contained in:
Axel Dörfler
+196
-149
@@ -1,5 +1,5 @@
|
||||
/*
|
||||
* Copyright 2004-2007, Haiku, Inc. All RightsReserved.
|
||||
* Copyright 2004-2010, Haiku, Inc. All RightsReserved.
|
||||
* Copyright 2002/03, Thomas Kurschel. All rights reserved.
|
||||
*
|
||||
* Distributed under the terms of the MIT License.
|
||||
@@ -7,158 +7,204 @@
|
||||
#ifndef _SCSI_CMDS_H
|
||||
#define _SCSI_CMDS_H
|
||||
|
||||
// SCSI commands and their data structures and constants
|
||||
|
||||
//! SCSI commands and their data structures and constants
|
||||
|
||||
|
||||
#include <lendian_bitfield.h>
|
||||
|
||||
|
||||
// always keep in mind that SCSI is big-endian !!!
|
||||
// Always keep in mind that SCSI is big-endian!
|
||||
|
||||
#define SCSI_STD_TIMEOUT 10
|
||||
|
||||
// SCSI device status (as the result of a command)
|
||||
#define SCSI_STATUS_GOOD (0 << 1)
|
||||
#define SCSI_STATUS_CHECK_CONDITION (1 << 1) // error occured
|
||||
#define SCSI_STATUS_CONDITION_MET (2 << 1) // "found" for SEARCH DATA and PREFETCH
|
||||
#define SCSI_STATUS_BUSY (4 << 1) // try again later (??? == QUEUE_FULL ???)
|
||||
#define SCSI_STATUS_INTERMEDIATE (8 << 1) // used by linked command only
|
||||
#define SCSI_STATUS_INTERMEDIATE_COND_MET (10 << 1) // ditto
|
||||
#define SCSI_STATUS_RESERVATION_CONFLICT (12 << 1) // only if RESERVE/RELEASE is used
|
||||
#define SCSI_STATUS_COMMAND_TERMINATED (17 << 1) // aborted by TERMINATE I/O PROCESS
|
||||
#define SCSI_STATUS_QUEUE_FULL (20 << 1) // queue full
|
||||
#define SCSI_STATUS_GOOD (0 << 1)
|
||||
#define SCSI_STATUS_CHECK_CONDITION (1 << 1) // error occured
|
||||
#define SCSI_STATUS_CONDITION_MET (2 << 1)
|
||||
// "found" for SEARCH DATA and PREFETCH
|
||||
#define SCSI_STATUS_BUSY (4 << 1)
|
||||
// try again later (??? == QUEUE_FULL ???)
|
||||
#define SCSI_STATUS_INTERMEDIATE (8 << 1)
|
||||
// used by linked command only
|
||||
#define SCSI_STATUS_INTERMEDIATE_COND_MET (10 << 1) // ditto
|
||||
#define SCSI_STATUS_RESERVATION_CONFLICT (12 << 1)
|
||||
// only if RESERVE/RELEASE is used
|
||||
#define SCSI_STATUS_COMMAND_TERMINATED (17 << 1)
|
||||
// aborted by TERMINATE I/O PROCESS
|
||||
#define SCSI_STATUS_QUEUE_FULL (20 << 1) // queue full
|
||||
|
||||
#define SCSI_STATUS_MASK 0xfe
|
||||
|
||||
// SCSI sense key
|
||||
#define SCSIS_KEY_NO_SENSE 0
|
||||
#define SCSIS_KEY_RECOVERED_ERROR 1
|
||||
#define SCSIS_KEY_NOT_READY 2 // operator intervention may be required
|
||||
#define SCSIS_KEY_MEDIUM_ERROR 3 // can be set if source could be hardware error
|
||||
#define SCSIS_KEY_HARDWARE_ERROR 4
|
||||
#define SCSIS_KEY_ILLEGAL_REQUEST 5 // invalid command
|
||||
#define SCSIS_KEY_UNIT_ATTENTION 6 // medium changed or target reset
|
||||
#define SCSIS_KEY_DATA_PROTECT 7 // data access forbidden
|
||||
#define SCSIS_KEY_BLANK_CHECK 8 // tried to read blank or to write non-blank medium
|
||||
#define SCSIS_KEY_VENDOR_SPECIFIC 9
|
||||
#define SCSIS_KEY_COPY_ABORTED 10 // error in COPY or COMPARE command
|
||||
#define SCSIS_KEY_ABORTED_COMMAND 11 // aborted by target, retry *may* help
|
||||
#define SCSIS_KEY_EQUAL 12 // during SEARCH: data found
|
||||
#define SCSIS_KEY_VOLUME_OVERFLOW 13 // tried to write buffered data beyond end of medium
|
||||
#define SCSIS_KEY_MISCOMPARE 14
|
||||
#define SCSIS_KEY_RESERVED 15
|
||||
#define SCSIS_KEY_NO_SENSE 0
|
||||
#define SCSIS_KEY_RECOVERED_ERROR 1
|
||||
#define SCSIS_KEY_NOT_READY 2
|
||||
// operator intervention may be required
|
||||
#define SCSIS_KEY_MEDIUM_ERROR 3
|
||||
// can be set if source could be hardware error
|
||||
#define SCSIS_KEY_HARDWARE_ERROR 4
|
||||
#define SCSIS_KEY_ILLEGAL_REQUEST 5 // invalid command
|
||||
#define SCSIS_KEY_UNIT_ATTENTION 6
|
||||
// medium changed or target reset
|
||||
#define SCSIS_KEY_DATA_PROTECT 7 // data access forbidden
|
||||
#define SCSIS_KEY_BLANK_CHECK 8
|
||||
// tried to read blank or to write non-blank medium
|
||||
#define SCSIS_KEY_VENDOR_SPECIFIC 9
|
||||
#define SCSIS_KEY_COPY_ABORTED 10
|
||||
// error in COPY or COMPARE command
|
||||
#define SCSIS_KEY_ABORTED_COMMAND 11
|
||||
// aborted by target, retry *may* help
|
||||
#define SCSIS_KEY_EQUAL 12 // during SEARCH: data found
|
||||
#define SCSIS_KEY_VOLUME_OVERFLOW 13
|
||||
// tried to write buffered data beyond end of medium
|
||||
#define SCSIS_KEY_MISCOMPARE 14
|
||||
#define SCSIS_KEY_RESERVED 15
|
||||
|
||||
// SCSI ASC and ASCQ data - (ASC << 8) | ASCQ
|
||||
// all codes with bit 7 of ASC or ASCQ set are vendor-specific
|
||||
#define SCSIS_ASC_NO_SENSE 0x0000
|
||||
#define SCSIS_ASC_IO_PROC_TERMINATED 0x0006
|
||||
#define SCSIS_ASC_AUDIO_PLAYING 0x0011
|
||||
#define SCSIS_ASC_AUDIO_PAUSED 0x0012
|
||||
#define SCSIS_ASC_AUDIO_COMPLETED 0x0013
|
||||
#define SCSIS_ASC_AUDIO_ERROR 0x0014 // playing has stopped due to error
|
||||
#define SCSIS_ASC_AUDIO_NO_STATUS 0x0015
|
||||
#define SCSIS_ASC_NO_INDEX 0x0100 // no index/sector signal
|
||||
#define SCSIS_ASC_NO_SEEK_CMP 0x0200 // ???
|
||||
#define SCSIS_ASC_WRITE_FAULT 0x0300
|
||||
#define SCSIS_ASC_LUN_NOT_READY 0x0400 // LUN not ready, cause not reportable
|
||||
#define SCSIS_ASC_LUN_BECOMING_READY 0x0401 // LUN in progress of becoming ready
|
||||
#define SCSIS_ASC_LUN_NEED_INIT 0x0402 // LUN need initializing command
|
||||
#define SCSIS_ASC_LUN_NEED_MANUAL_HELP 0x0403 // LUN needs manual intervention
|
||||
#define SCSIS_ASC_LUN_FORMATTING 0x0404 // LUN format in progress
|
||||
#define SCSIS_ASC_LUN_SEL_FAILED 0x0500 // LUN doesn't respond to selection
|
||||
#define SCSIS_ASC_LUN_COM_FAILURE 0x0800 // LUN communication failure
|
||||
#define SCSIS_ASC_LUN_TIMEOUT 0x0801 // LUN communication time-out
|
||||
#define SCSIS_ASC_LUN_COM_PARITY 0x0802 // LUN communication parity failure
|
||||
#define SCSIS_ASC_LUN_COM_CRC 0x0803 // LUN communication CRC failure (SCSI-3)
|
||||
#define SCSIS_ASC_WRITE_ERR_AUTOREALLOC 0x0c01 // recovered by auto-reallocation
|
||||
#define SCSIS_ASC_NO_SENSE 0x0000
|
||||
#define SCSIS_ASC_IO_PROC_TERMINATED 0x0006
|
||||
#define SCSIS_ASC_AUDIO_PLAYING 0x0011
|
||||
#define SCSIS_ASC_AUDIO_PAUSED 0x0012
|
||||
#define SCSIS_ASC_AUDIO_COMPLETED 0x0013
|
||||
#define SCSIS_ASC_AUDIO_ERROR 0x0014
|
||||
// playing has stopped due to error
|
||||
#define SCSIS_ASC_AUDIO_NO_STATUS 0x0015
|
||||
#define SCSIS_ASC_NO_INDEX 0x0100 // no index/sector signal
|
||||
#define SCSIS_ASC_NO_SEEK_CMP 0x0200 // ???
|
||||
#define SCSIS_ASC_WRITE_FAULT 0x0300
|
||||
#define SCSIS_ASC_LUN_NOT_READY 0x0400
|
||||
// LUN not ready, cause not reportable
|
||||
#define SCSIS_ASC_LUN_BECOMING_READY 0x0401
|
||||
// LUN in progress of becoming ready
|
||||
#define SCSIS_ASC_LUN_NEED_INIT 0x0402
|
||||
// LUN need initializing command
|
||||
#define SCSIS_ASC_LUN_NEED_MANUAL_HELP 0x0403
|
||||
// LUN needs manual intervention
|
||||
#define SCSIS_ASC_LUN_FORMATTING 0x0404
|
||||
// LUN format in progress
|
||||
#define SCSIS_ASC_LUN_SEL_FAILED 0x0500
|
||||
// LUN doesn't respond to selection
|
||||
#define SCSIS_ASC_LUN_COM_FAILURE 0x0800 // LUN communication failure
|
||||
#define SCSIS_ASC_LUN_TIMEOUT 0x0801
|
||||
// LUN communication time-out
|
||||
#define SCSIS_ASC_LUN_COM_PARITY 0x0802
|
||||
// LUN communication parity failure
|
||||
#define SCSIS_ASC_LUN_COM_CRC 0x0803
|
||||
// LUN communication CRC failure (SCSI-3)
|
||||
#define SCSIS_ASC_WRITE_ERR_AUTOREALLOC 0x0c01
|
||||
// recovered by auto-reallocation
|
||||
#define SCSIS_ASC_WRITE_ERR_AUTOREALLOC_FAILED 0x0c02
|
||||
#define SCSIS_ASC_ECC_ERROR 0x1000
|
||||
#define SCSIS_ASC_UNREC_READ_ERR 0x1100 // unrecovered read error
|
||||
#define SCSIS_ASC_READ_RETRIES_EXH 0x1101 // read retries exhausted
|
||||
#define SCSIS_ASC_UNREC_READ_ERR_AUTOREALLOC_FAILED 0x1104 // above + auto-reallocate failed
|
||||
#define SCSIS_ASC_RECORD_NOT_FOUND 0x1401
|
||||
#define SCSIS_ASC_RANDOM_POS_ERROR 0x1500 // random positioning error
|
||||
#define SCSIS_ASC_POSITIONING_ERR 0x1501 // mechanical positioning error
|
||||
#define SCSIS_ASC_POS_ERR_ON_READ 0x1502 // positioning error detected by reading
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ERR_CORR 0x1700 // recovered with no error correction applied
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_RETRIES 0x1701
|
||||
#define SCSIS_ASC_DATA_RECOV_POS_HEAD_OFS 0x1702 // ?recovered with positive head offset
|
||||
#define SCSIS_ASC_DATA_RECOV_NEG_HEAD_OFS 0x1703 // ?recovered with negative head offset
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_RETRIES_CIRC 0x1704 // recovered with retries/CIRC
|
||||
#define SCSIS_ASC_DATA_RECOV_PREV_SECT_ID 0x1705 // recovered using previous sector ID
|
||||
#define SCSIS_ASC_ECC_ERROR 0x1000
|
||||
#define SCSIS_ASC_UNREC_READ_ERR 0x1100 // unrecovered read error
|
||||
#define SCSIS_ASC_READ_RETRIES_EXH 0x1101 // read retries exhausted
|
||||
#define SCSIS_ASC_UNREC_READ_ERR_AUTOREALLOC_FAILED 0x1104
|
||||
// above + auto-reallocate failed
|
||||
#define SCSIS_ASC_RECORD_NOT_FOUND 0x1401
|
||||
#define SCSIS_ASC_RANDOM_POS_ERROR 0x1500 // random positioning error
|
||||
#define SCSIS_ASC_POSITIONING_ERR 0x1501
|
||||
// mechanical positioning error
|
||||
#define SCSIS_ASC_POS_ERR_ON_READ 0x1502
|
||||
// positioning error detected by reading
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ERR_CORR 0x1700
|
||||
// recovered with no error correction applied
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_RETRIES 0x1701
|
||||
#define SCSIS_ASC_DATA_RECOV_POS_HEAD_OFS 0x1702
|
||||
// ?recovered with positive head offset
|
||||
#define SCSIS_ASC_DATA_RECOV_NEG_HEAD_OFS 0x1703
|
||||
// ?recovered with negative head offset
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_RETRIES_CIRC 0x1704
|
||||
// recovered with retries/CIRC
|
||||
#define SCSIS_ASC_DATA_RECOV_PREV_SECT_ID 0x1705
|
||||
// recovered using previous sector ID
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ECC_AUTOREALLOC 0x1706
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ECC_REASSIGN 0x1707 // reassign recommended
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ECC_REWRITE 0x1708 // rewrite recommended
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_CORR 0x1800 // recovered using error correction
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_CORR_RETRIES 0x1801 // used error correction and retries
|
||||
#define SCSIS_ASC_DATA_RECOV_AUTOREALLOC 0x1802
|
||||
#define SCSIS_ASC_DATA_RECOV_CIRC 0x1803 // recovered using CIRC
|
||||
#define SCSIS_ASC_DATA_RECOV_LEC 0x1804 // recovered using LEC
|
||||
#define SCSIS_ASC_DATA_RECOV_REASSIGN 0x1805 // reassign recommended
|
||||
#define SCSIS_ASC_DATA_RECOV_REWRITE 0x1806 // rewrite recommended
|
||||
#define SCSIS_ASC_PARAM_LIST_LENGTH_ERR 0x1a00 // parameter list too short
|
||||
#define SCSIS_ASC_ID_RECOV 0x1e00 // recoved ID with ECC
|
||||
#define SCSIS_ASC_INV_OPCODE 0x2000
|
||||
#define SCSIS_ASC_LBA_OOR 0x2100 // LBA out of range
|
||||
#define SCSIS_ASC_ILL_FUNCTION 0x2200 // better use 0x2000/0x2400/0x2600 instead
|
||||
#define SCSIS_ASC_INV_CDB_FIELD 0x2400
|
||||
#define SCSIS_ASC_LUN_NOT_SUPPORTED 0x2500
|
||||
#define SCSIS_ASC_INV_PARAM_LIST_FIELD 0x2600
|
||||
#define SCSIS_ASC_PARAM_NOT_SUPPORTED 0x2601
|
||||
#define SCSIS_ASC_PARAM_VALUE_INV 0x2602
|
||||
#define SCSIS_ASC_WRITE_PROTECTED 0x2700
|
||||
#define SCSIS_ASC_MEDIUM_CHANGED 0x2800
|
||||
#define SCSIS_ASC_WAS_RESET 0x2900 // reset by power-on/bus reset/device reset
|
||||
#define SCSIS_ASC_PARAMS_CHANGED 0x2a00
|
||||
#define SCSIS_ASC_MEDIUM_FORMAT_CORRUPTED 0x3100
|
||||
#define SCSIS_ASC_ROUNDED_PARAM 0x3700 // parameter got rounded
|
||||
#define SCSIS_ASC_NO_MEDIUM 0x3a00 // medium not present
|
||||
#define SCSIS_ASC_INTERNAL_FAILURE 0x4400
|
||||
#define SCSIS_ASC_SEL_FAILURE 0x4500 // select/reselect failure
|
||||
#define SCSIS_ASC_UNSUCC_SOFT_RESET 0x4600 // unsuccessful soft reset
|
||||
#define SCSIS_ASC_SCSI_PARITY_ERR 0x4700 // SCSI parity error
|
||||
#define SCSIS_ASC_LOAD_EJECT_FAILED 0x5300 // media load or eject failed
|
||||
#define SCSIS_ASC_REMOVAL_PREVENTED 0x5302 // medium removal prevented
|
||||
#define SCSIS_ASC_REMOVAL_REQUESTED 0x5a01 // operator requests medium removal
|
||||
#define SCSIS_ASC_DATA_RECOV_NO_ECC_REWRITE 0x1708 // rewrite recommended
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_CORR 0x1800
|
||||
// recovered using error correction
|
||||
#define SCSIS_ASC_DATA_RECOV_WITH_CORR_RETRIES 0x1801
|
||||
// used error correction and retries
|
||||
#define SCSIS_ASC_DATA_RECOV_AUTOREALLOC 0x1802
|
||||
#define SCSIS_ASC_DATA_RECOV_CIRC 0x1803 // recovered using CIRC
|
||||
#define SCSIS_ASC_DATA_RECOV_LEC 0x1804 // recovered using LEC
|
||||
#define SCSIS_ASC_DATA_RECOV_REASSIGN 0x1805 // reassign recommended
|
||||
#define SCSIS_ASC_DATA_RECOV_REWRITE 0x1806 // rewrite recommended
|
||||
#define SCSIS_ASC_PARAM_LIST_LENGTH_ERR 0x1a00 // parameter list too short
|
||||
#define SCSIS_ASC_ID_RECOV 0x1e00 // recoved ID with ECC
|
||||
#define SCSIS_ASC_INV_OPCODE 0x2000
|
||||
#define SCSIS_ASC_LBA_OOR 0x2100 // LBA out of range
|
||||
#define SCSIS_ASC_ILL_FUNCTION 0x2200
|
||||
// better use 0x2000/0x2400/0x2600 instead
|
||||
#define SCSIS_ASC_INV_CDB_FIELD 0x2400
|
||||
#define SCSIS_ASC_LUN_NOT_SUPPORTED 0x2500
|
||||
#define SCSIS_ASC_INV_PARAM_LIST_FIELD 0x2600
|
||||
#define SCSIS_ASC_PARAM_NOT_SUPPORTED 0x2601
|
||||
#define SCSIS_ASC_PARAM_VALUE_INV 0x2602
|
||||
#define SCSIS_ASC_WRITE_PROTECTED 0x2700
|
||||
#define SCSIS_ASC_MEDIUM_CHANGED 0x2800
|
||||
#define SCSIS_ASC_WAS_RESET 0x2900
|
||||
// reset by power-on/bus reset/device reset
|
||||
#define SCSIS_ASC_PARAMS_CHANGED 0x2a00
|
||||
#define SCSIS_ASC_MEDIUM_FORMAT_CORRUPTED 0x3100
|
||||
#define SCSIS_ASC_ROUNDED_PARAM 0x3700 // parameter got rounded
|
||||
#define SCSIS_ASC_NO_MEDIUM 0x3a00 // medium not present
|
||||
#define SCSIS_ASC_INTERNAL_FAILURE 0x4400
|
||||
#define SCSIS_ASC_SEL_FAILURE 0x4500 // select/reselect failure
|
||||
#define SCSIS_ASC_UNSUCC_SOFT_RESET 0x4600 // unsuccessful soft reset
|
||||
#define SCSIS_ASC_SCSI_PARITY_ERR 0x4700 // SCSI parity error
|
||||
#define SCSIS_ASC_LOAD_EJECT_FAILED 0x5300
|
||||
// media load or eject failed
|
||||
#define SCSIS_ASC_REMOVAL_PREVENTED 0x5302 // medium removal prevented
|
||||
#define SCSIS_ASC_REMOVAL_REQUESTED 0x5a01
|
||||
// operator requests medium removal
|
||||
|
||||
// some scsi op-codes
|
||||
#define SCSI_OP_TEST_UNIT_READY 0x00
|
||||
#define SCSI_OP_REQUEST_SENSE 0x03
|
||||
#define SCSI_OP_FORMAT 0x04
|
||||
#define SCSI_OP_READ_6 0x08
|
||||
#define SCSI_OP_WRITE_6 0x0a
|
||||
#define SCSI_OP_INQUIRY 0x12
|
||||
#define SCSI_OP_MODE_SELECT_6 0x15
|
||||
#define SCSI_OP_RESERVE 0x16
|
||||
#define SCSI_OP_RELEASE 0x17
|
||||
#define SCSI_OP_MODE_SENSE_6 0x1a
|
||||
#define SCSI_OP_START_STOP 0x1b
|
||||
#define SCSI_OP_RECEIVE_DIAGNOSTIC 0x1c
|
||||
#define SCSI_OP_SEND_DIAGNOSTIC 0x1d
|
||||
#define SCSI_OP_PREVENT_ALLOW 0x1e
|
||||
#define SCSI_OP_READ_CAPACITY 0x25
|
||||
#define SCSI_OP_READ_10 0x28
|
||||
#define SCSI_OP_WRITE_10 0x2a
|
||||
#define SCSI_OP_POSITION_TO_ELEMENT 0x2b
|
||||
#define SCSI_OP_VERIFY 0x2f
|
||||
#define SCSI_OP_SYNCHRONIZE_CACHE 0x35
|
||||
#define SCSI_OP_WRITE_BUFFER 0x3b
|
||||
#define SCSI_OP_READ_BUFFER 0x3c
|
||||
#define SCSI_OP_CHANGE_DEFINITION 0x40
|
||||
#define SCSI_OP_READ_SUB_CHANNEL 0x42
|
||||
#define SCSI_OP_READ_TOC 0x43
|
||||
#define SCSI_OP_PLAY_MSF 0x47
|
||||
#define SCSI_OP_PLAY_AUDIO_TRACK_INDEX 0x48 // obsolete, spec missing
|
||||
#define SCSI_OP_PAUSE_RESUME 0x4b
|
||||
#define SCSI_OP_STOP_PLAY 0x4e
|
||||
#define SCSI_OP_MODE_SELECT_10 0x55
|
||||
#define SCSI_OP_MODE_SENSE_10 0x5A
|
||||
#define SCSI_OP_MOVE_MEDIUM 0xa5
|
||||
#define SCSI_OP_READ_12 0xa8
|
||||
#define SCSI_OP_WRITE_12 0xaa
|
||||
#define SCSI_OP_READ_ELEMENT_STATUS 0xb8
|
||||
#define SCSI_OP_SCAN 0xba
|
||||
#define SCSI_OP_READ_CD 0xbe
|
||||
#define SCSI_OP_TEST_UNIT_READY 0x00
|
||||
#define SCSI_OP_REQUEST_SENSE 0x03
|
||||
#define SCSI_OP_FORMAT 0x04
|
||||
#define SCSI_OP_READ_6 0x08
|
||||
#define SCSI_OP_WRITE_6 0x0a
|
||||
#define SCSI_OP_INQUIRY 0x12
|
||||
#define SCSI_OP_MODE_SELECT_6 0x15
|
||||
#define SCSI_OP_RESERVE 0x16
|
||||
#define SCSI_OP_RELEASE 0x17
|
||||
#define SCSI_OP_MODE_SENSE_6 0x1a
|
||||
#define SCSI_OP_START_STOP 0x1b
|
||||
#define SCSI_OP_RECEIVE_DIAGNOSTIC 0x1c
|
||||
#define SCSI_OP_SEND_DIAGNOSTIC 0x1d
|
||||
#define SCSI_OP_PREVENT_ALLOW 0x1e
|
||||
#define SCSI_OP_READ_CAPACITY 0x25
|
||||
#define SCSI_OP_READ_10 0x28
|
||||
#define SCSI_OP_WRITE_10 0x2a
|
||||
#define SCSI_OP_POSITION_TO_ELEMENT 0x2b
|
||||
#define SCSI_OP_VERIFY 0x2f
|
||||
#define SCSI_OP_SYNCHRONIZE_CACHE 0x35
|
||||
#define SCSI_OP_WRITE_BUFFER 0x3b
|
||||
#define SCSI_OP_READ_BUFFER 0x3c
|
||||
#define SCSI_OP_CHANGE_DEFINITION 0x40
|
||||
#define SCSI_OP_READ_SUB_CHANNEL 0x42
|
||||
#define SCSI_OP_READ_TOC 0x43
|
||||
#define SCSI_OP_PLAY_MSF 0x47
|
||||
#define SCSI_OP_PLAY_AUDIO_TRACK_INDEX 0x48 // obsolete, spec missing
|
||||
#define SCSI_OP_PAUSE_RESUME 0x4b
|
||||
#define SCSI_OP_STOP_PLAY 0x4e
|
||||
#define SCSI_OP_MODE_SELECT_10 0x55
|
||||
#define SCSI_OP_MODE_SENSE_10 0x5A
|
||||
#define SCSI_OP_READ_16 0x88
|
||||
#define SCSI_OP_WRITE_16 0x8a
|
||||
#define SCSI_OP_SERVICE_ACTION_IN 0x9e
|
||||
#define SCSI_OP_SERVICE_ACTION_OUT 0x9f
|
||||
#define SCSI_OP_MOVE_MEDIUM 0xa5
|
||||
#define SCSI_OP_READ_12 0xa8
|
||||
#define SCSI_OP_WRITE_12 0xaa
|
||||
#define SCSI_OP_READ_ELEMENT_STATUS 0xb8
|
||||
#define SCSI_OP_SCAN 0xba
|
||||
#define SCSI_OP_READ_CD 0xbe
|
||||
|
||||
// Service-Action-In defines
|
||||
#define SCSI_SAI_READ_CAPACITY_16 0x10
|
||||
|
||||
|
||||
// INQUIRY
|
||||
|
||||
@@ -193,7 +239,7 @@ typedef struct scsi_res_inquiry {
|
||||
response_data_format : 4, // 2 = SCSI/2 compliant
|
||||
_res3_4 : 2,
|
||||
term_iop : 1, // 1 = supports TERMINATE I/O PROCESS
|
||||
async_enc : 1 // processor devices only :
|
||||
async_enc : 1 // processor devices only :
|
||||
// Asynchronous Event Notification Capable
|
||||
);
|
||||
uint8 additional_length; // total (whished) length = this + 4
|
||||
@@ -370,19 +416,19 @@ typedef struct scsi_sense {
|
||||
LBITFIELD8_5(
|
||||
sense_key : 4,
|
||||
res2_4 : 1,
|
||||
ILI : 1, // incorrect length indicator - req. block
|
||||
ILI : 1, // incorrect length indicator - req. block
|
||||
// length doesn't match physical block length
|
||||
EOM : 1, // serial devices only
|
||||
Filemark : 1 // optional for random access
|
||||
);
|
||||
|
||||
|
||||
uint8 highest_inf; // device-type or command specific
|
||||
uint8 high_inf; // device-type 0, 4, 5, 7: block address
|
||||
uint8 mid_inf; // device-type 1, 2, 3: req length - act. length
|
||||
uint8 low_inf; // (and others for sequential dev. and COPY cmds
|
||||
|
||||
|
||||
uint8 add_sense_length; // total length = this + 7
|
||||
|
||||
|
||||
uint8 highest_cmd_inf;
|
||||
uint8 high_cmd_inf;
|
||||
uint8 mid_cmd_inf;
|
||||
@@ -390,7 +436,7 @@ typedef struct scsi_sense {
|
||||
uint8 asc;
|
||||
uint8 ascq; // this can be zero if unsupported
|
||||
uint8 unit_code; // != 0 to specify internal device unit
|
||||
|
||||
|
||||
union {
|
||||
struct {
|
||||
LBITFIELD8_2(
|
||||
@@ -400,7 +446,7 @@ typedef struct scsi_sense {
|
||||
uint8 mid_key_spec;
|
||||
uint8 low_key_spec;
|
||||
} raw;
|
||||
|
||||
|
||||
// ILLEGAL REQUEST
|
||||
struct {
|
||||
LBITFIELD8_5(
|
||||
@@ -418,22 +464,22 @@ typedef struct scsi_sense {
|
||||
struct {
|
||||
LBITFIELD8_2(
|
||||
res15_0 : 7,
|
||||
SKSV : 1
|
||||
SKSV : 1
|
||||
);
|
||||
uint8 high_retry_cnt;
|
||||
uint8 low_retry_cnt;
|
||||
} acc_error;
|
||||
|
||||
|
||||
// format progress (if sense key = NOT READY)
|
||||
struct {
|
||||
LBITFIELD8_2(
|
||||
res15_0 : 7,
|
||||
SKSV : 1
|
||||
SKSV : 1
|
||||
);
|
||||
uint16 progress; // 0 = start, 0xffff = almost finished
|
||||
} format_progress;
|
||||
} sense_key_spec;
|
||||
|
||||
|
||||
// starting with offset 18 there are additional sense byte
|
||||
} _PACKED scsi_sense;
|
||||
|
||||
@@ -625,13 +671,13 @@ typedef struct scsi_modepage_control {
|
||||
UAAENP : 1, // unit attention AEN permission; true = send AEN,
|
||||
// false = generate UA condition (for everything but init.)
|
||||
RAENP : 1, // ready AEN permission; true = send async event notification
|
||||
// (AEN) instead of generating an Unit Attention (UA) Condition
|
||||
// (AEN) instead of generating an Unit Attention (UA) Condition
|
||||
// after initialization
|
||||
res4_3 : 4,
|
||||
EECA : 1 // enable Extended Contingent Allegiance
|
||||
);
|
||||
uint8 res5;
|
||||
uint8 high_AEN_holdoff; // ready AEN hold off period - delay in ms between
|
||||
uint8 high_AEN_holdoff; // ready AEN hold off period - delay in ms between
|
||||
uint8 low_AEN_holdoff; // initialization and AEN
|
||||
} scsi_modepage_control;
|
||||
|
||||
@@ -897,7 +943,7 @@ typedef struct scsi_cmd_pause_resume {
|
||||
} _PACKED scsi_cmd_pause_resume;
|
||||
|
||||
|
||||
// SCAN
|
||||
// SCAN
|
||||
|
||||
typedef struct scsi_cmd_scan {
|
||||
uint8 opcode;
|
||||
@@ -947,7 +993,7 @@ typedef struct scsi_cmd_read_cd {
|
||||
_res9_0 : 1,
|
||||
error_field : 2,
|
||||
edc_ecc : 1, // include EDC/ECC; includes 8 byte padding for Mode 1 format
|
||||
user_data : 1, // if 1, include user data
|
||||
user_data : 1, // if 1, include user data
|
||||
// (mode select block size is ignored)
|
||||
header_code : 2,
|
||||
sync : 1 // if 1, include sync field from sector
|
||||
@@ -962,7 +1008,7 @@ typedef struct scsi_cmd_read_cd {
|
||||
// possible values for header_code
|
||||
enum scsi_read_cd_header_code {
|
||||
scsi_read_cd_header_none = 0,
|
||||
scsi_read_cd_header_hdr_only = 1,
|
||||
scsi_read_cd_header_hdr_only = 1,
|
||||
scsi_read_cd_header_sub_header_only = 2,
|
||||
scsi_read_cd_header_all_headers = 3,
|
||||
};
|
||||
@@ -994,9 +1040,10 @@ typedef struct scsi_cmd_sync_cache {
|
||||
lun : 3
|
||||
);
|
||||
scsi_cd_lba lba;
|
||||
uint8 _res2;
|
||||
uint8 _res2;
|
||||
uint16 block_count; // big endian
|
||||
uint8 control;
|
||||
} _PACKED scsi_cmd_sync_cache;
|
||||
|
||||
|
||||
#endif /* _SCSI_CMDS_H */
|
||||
|
||||
Reference in New Issue
Block a user