Add support for Intel Centrino Wireless-N 2230.

Fixes #12006.

Signed-off-by: Adrien Destugues <[email protected]>

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/Jamfile

@@ -25,12 +25,14 @@ KernelAddon iprowifi4965 :
 	;
 
 HAIKU_WIFI_FIRMWARE_PACKAGES on iprowifi4965 =
-	iwlwifi-1000-ucode-39.31.5.1 iwlwifi-4965-ucode-228.61.2.24
+	iwlwifi-1000-ucode-39.31.5.1 
+	iwlwifi-2030-ucode-18.168.6.1 iwlwifi-4965-ucode-228.61.2.24
 	iwlwifi-5000-ucode-8.83.5.1 iwlwifi-5150-ucode-8.24.2.2
 	iwlwifi-6000-ucode-9.221.4.1 iwlwifi-6000g2a-ucode-18.168.6.1
 	iwlwifi-6000g2b-ucode-18.168.6.1 iwlwifi-6050-ucode-41.28.5.1 ;
 HAIKU_WIFI_FIRMWARE_ARCHIVES on iprowifi4965 =
-	iwlwifi-1000-ucode-39.31.5.1.tgz iwlwifi-4965-ucode-228.61.2.24.tgz
+	iwlwifi-1000-ucode-39.31.5.1.tgz 
+	iwlwifi-2030-ucode-18.168.6.1.tgz iwlwifi-4965-ucode-228.61.2.24.tgz
 	iwlwifi-5000-ucode-8.83.5.1.tgz iwlwifi-5150-ucode-8.24.2.2.tgz
 	iwlwifi-6000-ucode-9.221.4.1.tgz iwlwifi-6000g2a-ucode-18.168.6.1.tgz
 	iwlwifi-6000g2b-ucode-18.168.6.1.tgz iwlwifi-6050-ucode-41.28.5.1.tgz ;

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/dev/iwn/if_iwn.c

@@ -284,7 +284,8 @@ static int	iwn5000_query_calibration(struct iwn_softc *);
 static int	iwn5000_send_calibration(struct iwn_softc *);
 static int	iwn5000_send_wimax_coex(struct iwn_softc *);
 static int	iwn5000_crystal_calib(struct iwn_softc *);
-static int	iwn5000_temp_offset_calib(struct iwn_softc *);
+static int	iwn6000_temp_offset_calib(struct iwn_softc *);
+static int	iwn2000_temp_offset_calib(struct iwn_softc *);
 static int	iwn4965_post_alive(struct iwn_softc *);
 static int	iwn5000_post_alive(struct iwn_softc *);
 static int	iwn4965_load_bootcode(struct iwn_softc *, const uint8_t *,
@@ -806,6 +807,11 @@ iwn5000_attach(struct iwn_softc *sc, uint16_t pid)
 		} else
 			sc->fwname = "iwn6000g2afw";
 		break;
+	case IWN_HW_REV_TYPE_2030:
+		sc->limits = &iwn2000_sensitivity_limits;
+		sc->fwname = "iwn2030fw";
+		sc->sc_flags |= IWN_FLAG_ADV_BTCOEX;
+		break;
 	default:
 		device_printf(sc->sc_dev, "adapter type %d not supported\n",
 		    sc->hw_type);
@@ -1774,6 +1780,14 @@ iwn5000_read_eeprom(struct iwn_softc *sc)
 	    hdr.version, hdr.pa_type, le16toh(hdr.volt));
 	sc->calib_ver = hdr.version;
 
+	if (sc->hw_type == IWN_HW_REV_TYPE_2030) {
+		sc->eeprom_voltage = htole16(hdr.volt);
+		iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2);
+		sc->eeprom_temp = htole16(val);
+		iwn_read_prom_data(sc, base + IWN2000_EEPROM_RAWTEMP, &val, 2);
+		sc->eeprom_rawtemp = htole16(val);
+	}
+
 	if (sc->hw_type == IWN_HW_REV_TYPE_5150) {
 		/* Compute temperature offset. */
 		iwn_read_prom_data(sc, base + IWN5000_EEPROM_TEMP, &val, 2);
@@ -5002,28 +5016,55 @@ iwn_send_advanced_btcoex(struct iwn_softc *sc)
 		0xcc00ff28, 0x0000aaaa, 0xcc00aaaa, 0x0000aaaa,
 		0xc0004000, 0x00004000, 0xf0005000, 0xf0005000,
 	};
-	struct iwn6000_btcoex_config btconfig;
 	struct iwn_btcoex_priotable btprio;
 	struct iwn_btcoex_prot btprot;
 	int error, i;
 
-	memset(&btconfig, 0, sizeof btconfig);
+	if (sc->hw_type == IWN_HW_REV_TYPE_2030) {
-	btconfig.flags = 145;
+		struct iwn2000_btcoex_config btconfig;
-	btconfig.max_kill = 5;
+ 
-	btconfig.bt3_t7_timer = 1;
+		memset(&btconfig, 0, sizeof btconfig);
-	btconfig.kill_ack = htole32(0xffff0000);
+		btconfig.flags = 145;
-	btconfig.kill_cts = htole32(0xffff0000);
+		btconfig.max_kill = 5;
-	btconfig.sample_time = 2;
+		btconfig.bt3_t7_timer = 1;
-	btconfig.bt3_t2_timer = 0xc;
+		btconfig.kill_ack = htole32(0xffff0000);
-	for (i = 0; i < 12; i++)
+		btconfig.kill_cts = htole32(0xffff0000);
-		btconfig.lookup_table[i] = htole32(btcoex_3wire[i]);
+		btconfig.sample_time = 2;
-	btconfig.valid = htole16(0xff);
+		btconfig.bt3_t2_timer = 0xc;
-	btconfig.prio_boost = 0xf0;
+		for (i = 0; i < 12; i++)
-	DPRINTF(sc, IWN_DEBUG_RESET,
+			btconfig.lookup_table[i] = htole32(btcoex_3wire[i]);
-	    "%s: configuring advanced bluetooth coexistence\n", __func__);
+		btconfig.valid = htole16(0xff);
-	error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig, sizeof(btconfig), 1);
+		btconfig.prio_boost = htole32(0xf0);
-	if (error != 0)
+		DPRINTF(sc, IWN_DEBUG_RESET,
-		return error;
+		    "%s: configuring advanced bluetooth coexistence\n",
+		    __func__);
+		error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig,
+		    sizeof(btconfig), 1);
+		if (error != 0)
+			return (error);
+	} else {
+		struct iwn6000_btcoex_config btconfig;
+
+		memset(&btconfig, 0, sizeof btconfig);
+		btconfig.flags = 145;
+		btconfig.max_kill = 5;
+		btconfig.bt3_t7_timer = 1;
+		btconfig.kill_ack = htole32(0xffff0000);
+		btconfig.kill_cts = htole32(0xffff0000);
+		btconfig.sample_time = 2;
+		btconfig.bt3_t2_timer = 0xc;
+		for (i = 0; i < 12; i++)
+			btconfig.lookup_table[i] = htole32(btcoex_3wire[i]);
+		btconfig.valid = htole16(0xff);
+		btconfig.prio_boost = 0xf0;
+		DPRINTF(sc, IWN_DEBUG_RESET,
+		    "%s: configuring advanced bluetooth coexistence\n",
+		    __func__);
+		error = iwn_cmd(sc, IWN_CMD_BT_COEX, &btconfig,
+		    sizeof(btconfig), 1);
+		if (error != 0)
+			return (error);
+	}
 
 	memset(&btprio, 0, sizeof btprio);
 	btprio.calib_init1 = 0x6;
@@ -5074,9 +5115,16 @@ iwn_config(struct iwn_softc *sc)
 	uint16_t rxchain;
 	int error;
 
+	/* Set radio temperature sensor offset. */
 	if (sc->hw_type == IWN_HW_REV_TYPE_6005) {
-		/* Set radio temperature sensor offset. */
+		error = iwn6000_temp_offset_calib(sc);
-		error = iwn5000_temp_offset_calib(sc);
+		if (error != 0) {
+			device_printf(sc->sc_dev,
+			    "%s: could not set temperature offset\n", __func__);
+			return error;
+		}
+	} else if (sc->hw_type == IWN_HW_REV_TYPE_2030) {
+		error = iwn2000_temp_offset_calib(sc);
 		if (error != 0) {
 			device_printf(sc->sc_dev,
 			    "%s: could not set temperature offset\n", __func__);
@@ -5943,12 +5991,12 @@ iwn5000_crystal_calib(struct iwn_softc *sc)
 }
 
 static int
-iwn5000_temp_offset_calib(struct iwn_softc *sc)
+iwn6000_temp_offset_calib(struct iwn_softc *sc)
 {
-	struct iwn5000_phy_calib_temp_offset cmd;
+	struct iwn6000_phy_calib_temp_offset cmd;
 
 	memset(&cmd, 0, sizeof cmd);
-	cmd.code = IWN5000_PHY_CALIB_TEMP_OFFSET;
+	cmd.code = IWN6000_PHY_CALIB_TEMP_OFFSET;
 	cmd.ngroups = 1;
 	cmd.isvalid = 1;
 	if (sc->eeprom_temp != 0)
@@ -5960,6 +6008,31 @@ iwn5000_temp_offset_calib(struct iwn_softc *sc)
 	return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0);
 }
 
+static int
+iwn2000_temp_offset_calib(struct iwn_softc *sc)
+{
+	struct iwn2000_phy_calib_temp_offset cmd;
+
+	memset(&cmd, 0, sizeof cmd);
+	cmd.code = IWN2000_PHY_CALIB_TEMP_OFFSET;
+	cmd.ngroups = 1;
+	cmd.isvalid = 1;
+	if (sc->eeprom_rawtemp != 0) {
+		cmd.offset_low = htole16(sc->eeprom_rawtemp);
+		cmd.offset_high = htole16(sc->eeprom_temp);
+	} else {
+		cmd.offset_low = htole16(IWN_DEFAULT_TEMP_OFFSET);
+		cmd.offset_high = htole16(IWN_DEFAULT_TEMP_OFFSET);
+	}
+	cmd.burnt_voltage_ref = htole16(sc->eeprom_voltage);
+
+	DPRINTF(sc, IWN_DEBUG_CALIBRATE,
+	    "setting radio sensor offset to %d:%d, voltage to %d\n",
+	    htole16(cmd.offset_low), htole16(cmd.offset_high),
+	    htole16(cmd.burnt_voltage_ref));
+	return iwn_cmd(sc, IWN_CMD_PHY_CALIB, &cmd, sizeof cmd, 0);
+}
+
 /*
  * This function is called after the runtime firmware notifies us of its
  * readiness (called in a process context).
@@ -6663,6 +6736,8 @@ iwn5000_nic_config(struct iwn_softc *sc)
 	}
 	if (sc->hw_type == IWN_HW_REV_TYPE_6005)
 		IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_6050_1X2);
+	if (sc->hw_type == IWN_HW_REV_TYPE_2030)
+		IWN_SETBITS(sc, IWN_GP_DRIVER, IWN_GP_DRIVER_RADIO_IQ_INVERT);
 	return 0;
 }
 

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/dev/iwn/if_iwnreg.h

@@ -206,6 +206,7 @@
 #define IWN_HW_REV_TYPE_6000	7
 #define IWN_HW_REV_TYPE_6050	8
 #define IWN_HW_REV_TYPE_6005	11
+#define IWN_HW_REV_TYPE_2030	12
 
 /* Possible flags for register IWN_GIO_CHICKEN. */
 #define IWN_GIO_CHICKEN_L1A_NO_L0S_RX	(1 << 23)
@@ -220,6 +221,7 @@
 #define IWN_GP_DRIVER_RADIO_2X2_IPA	(2 << 0)
 #define IWN_GP_DRIVER_CALIB_VER6	(1 << 2)
 #define IWN_GP_DRIVER_6050_1X2		(1 << 3)
+#define IWN_GP_DRIVER_RADIO_IQ_INVERT	(1 << 7)
 
 /* Possible flags for register IWN_UCODE_GP1_CLR. */
 #define IWN_UCODE_GP1_RFKILL		(1 << 1)
@@ -878,6 +880,25 @@ struct iwn6000_btcoex_config {
 	uint16_t	rx_prio_boost;
 } __packed;
 
+struct iwn2000_btcoex_config {
+	uint8_t		flags;		/* same as in iwn6000_btcoex_config */
+	uint8_t		lead_time;
+	uint8_t		max_kill;
+	uint8_t		bt3_t7_timer;
+	uint32_t	kill_ack;
+	uint32_t	kill_cts;
+	uint8_t		sample_time;
+	uint8_t		bt3_t2_timer;
+	uint16_t	bt4_reaction;
+	uint32_t	lookup_table[12];
+	uint16_t	bt4_decision;
+	uint16_t	valid;
+    	uint32_t	prio_boost;
+	uint8_t		reserved;
+	uint8_t		tx_prio_boost;
+	uint16_t	rx_prio_boost;
+} __packed;
+
 struct iwn_btcoex_priotable {
 	uint8_t		calib_init1;
 	uint8_t		calib_init2;
@@ -965,11 +986,12 @@ struct iwn_phy_calib {
 #define IWN5000_PHY_CALIB_CRYSTAL		15
 #define IWN5000_PHY_CALIB_BASE_BAND		16
 #define IWN5000_PHY_CALIB_TX_IQ_PERIODIC	17
-#define IWN5000_PHY_CALIB_TEMP_OFFSET		18
-
 #define IWN5000_PHY_CALIB_RESET_NOISE_GAIN	18
 #define IWN5000_PHY_CALIB_NOISE_GAIN		19
 
+#define IWN6000_PHY_CALIB_TEMP_OFFSET		18
+#define IWN2000_PHY_CALIB_TEMP_OFFSET		18
+
 	uint8_t	group;
 	uint8_t	ngroups;
 	uint8_t	isvalid;
@@ -985,7 +1007,7 @@ struct iwn5000_phy_calib_crystal {
 	uint8_t	reserved[2];
 } __packed;
 
-struct iwn5000_phy_calib_temp_offset {
+struct iwn6000_phy_calib_temp_offset {
 	uint8_t		code;
 	uint8_t		group;
 	uint8_t		ngroups;
@@ -996,6 +1018,17 @@ struct iwn5000_phy_calib_temp_offset {
 	uint16_t	reserved;
 } __packed;
 
+struct iwn2000_phy_calib_temp_offset {
+	uint8_t		code;
+	uint8_t		group;
+	uint8_t		ngroups;
+	uint8_t		isvalid;
+	int16_t		offset_high;
+	int16_t		offset_low;
+	int16_t		burnt_voltage_ref;
+	int16_t		reserved;
+} __packed;
+
 struct iwn_phy_calib_gain {
 	uint8_t	code;
 	uint8_t	group;
@@ -1414,6 +1447,7 @@ struct iwn_fw_tlv {
 #define IWN5000_EEPROM_CRYSTAL	0x128
 #define IWN5000_EEPROM_TEMP	0x12a
 #define IWN5000_EEPROM_VOLT	0x12b
+#define IWN2000_EEPROM_RAWTEMP	0x12b
 
 /* Possible flags for IWN_EEPROM_SKU_CAP. */
 #define IWN_EEPROM_SKU_CAP_11N	(1 << 6)
@@ -1722,6 +1756,18 @@ static const struct iwn_sensitivity_limits iwn6000_sensitivity_limits = {
 	100
 };
 
+static const struct iwn_sensitivity_limits iwn2000_sensitivity_limits = {
+	105, 110,
+	192, 232,
+	 80, 145,
+	128, 232,
+	125, 175,
+	160, 310,
+	 97,
+	 97,
+	100
+};
+
 /* Map TID to TX scheduler's FIFO. */
 static const uint8_t iwn_tid2fifo[] = {
 	1, 0, 0, 1, 2, 2, 3, 3, 7, 7, 7, 7, 7, 7, 7, 7, 3

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/dev/iwn/if_iwnvar.h

@@ -295,6 +295,7 @@ struct iwn_softc {
 	uint32_t		eeprom_crystal;
 	int16_t			eeprom_temp;
 	int16_t			eeprom_voltage;
+	int16_t			eeprom_rawtemp;
 	int8_t			maxpwr2GHz;
 	int8_t			maxpwr5GHz;
 	int8_t			maxpwr[IEEE80211_CHAN_MAX];

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/glue.c

@@ -24,8 +24,9 @@ NO_HAIKU_FBSD_MII_DRIVER();
 NO_HAIKU_REENABLE_INTERRUPTS();
 HAIKU_DRIVER_REQUIREMENTS(FBSD_TASKQUEUES | FBSD_WLAN);
 HAIKU_FIRMWARE_VERSION(44417);
-HAIKU_FIRMWARE_NAME_MAP(8) = {
+HAIKU_FIRMWARE_NAME_MAP(9) = {
 	{"iwn1000fw", "iwlwifi-1000-5.ucode"},
+	{"iwn2030fw", "iwlwifi-2030-6.ucode"},
 	{"iwn4965fw", "iwlwifi-4965-2.ucode"},
 	{"iwn5000fw", "iwlwifi-5000-5.ucode"},
 	{"iwn5150fw", "iwlwifi-5150-2.ucode"},