diff --git a/src/libs/jpeg/cderror.h b/src/libs/jpeg/cderror.h new file mode 100644 index 0000000000..e19c475c5c --- /dev/null +++ b/src/libs/jpeg/cderror.h @@ -0,0 +1,134 @@ +/* + * cderror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the cjpeg/djpeg + * applications. These strings are not needed as part of the JPEG library + * proper. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef CDERROR_H +#define CDERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* CDERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ + +#ifdef BMP_SUPPORTED +JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") +JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") +JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") +JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") +JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") +JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") +JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image") +JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") +JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") +JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") +JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") +JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") +#endif /* BMP_SUPPORTED */ + +#ifdef GIF_SUPPORTED +JMESSAGE(JERR_GIF_BUG, "GIF output got confused") +JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") +JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") +JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") +JMESSAGE(JERR_GIF_NOT, "Not a GIF file") +JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") +JMESSAGE(JTRC_GIF_BADVERSION, + "Warning: unexpected GIF version number '%c%c%c'") +JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") +JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") +JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") +JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") +JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") +JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") +#endif /* GIF_SUPPORTED */ + +#ifdef PPM_SUPPORTED +JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") +JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") +JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") +JMESSAGE(JTRC_PGM, "%ux%u PGM image") +JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") +JMESSAGE(JTRC_PPM, "%ux%u PPM image") +JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") +#endif /* PPM_SUPPORTED */ + +#ifdef RLE_SUPPORTED +JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") +JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") +JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") +JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") +JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") +JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") +JMESSAGE(JERR_RLE_NOT, "Not an RLE file") +JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") +JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") +JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") +JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") +JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") +JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") +JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") +#endif /* RLE_SUPPORTED */ + +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") +JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") +JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") +JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") +JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") +JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") +#else +JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") +#endif /* TARGA_SUPPORTED */ + +JMESSAGE(JERR_BAD_CMAP_FILE, + "Color map file is invalid or of unsupported format") +JMESSAGE(JERR_TOO_MANY_COLORS, + "Output file format cannot handle %d colormap entries") +JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_UNKNOWN_FORMAT, + "Unrecognized input file format --- perhaps you need -targa") +#else +JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") +#endif +JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTADDONCODE +} ADDON_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE diff --git a/src/libs/jpeg/cdjpeg.c b/src/libs/jpeg/cdjpeg.c new file mode 100644 index 0000000000..b6250ff97c --- /dev/null +++ b/src/libs/jpeg/cdjpeg.c @@ -0,0 +1,181 @@ +/* + * cdjpeg.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common support routines used by the IJG application + * programs (cjpeg, djpeg, jpegtran). + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include /* to declare isupper(), tolower() */ +#ifdef NEED_SIGNAL_CATCHER +#include /* to declare signal() */ +#endif +#ifdef USE_SETMODE +#include /* to declare setmode()'s parameter macros */ +/* If you have setmode() but not , just delete this line: */ +#include /* to declare setmode() */ +#endif + + +/* + * Signal catcher to ensure that temporary files are removed before aborting. + * NB: for Amiga Manx C this is actually a global routine named _abort(); + * we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus... + */ + +#ifdef NEED_SIGNAL_CATCHER + +static j_common_ptr sig_cinfo; + +void /* must be global for Manx C */ +signal_catcher (int signum) +{ + if (sig_cinfo != NULL) { + if (sig_cinfo->err != NULL) /* turn off trace output */ + sig_cinfo->err->trace_level = 0; + jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */ + } + exit(EXIT_FAILURE); +} + + +GLOBAL(void) +enable_signal_catcher (j_common_ptr cinfo) +{ + sig_cinfo = cinfo; +#ifdef SIGINT /* not all systems have SIGINT */ + signal(SIGINT, signal_catcher); +#endif +#ifdef SIGTERM /* not all systems have SIGTERM */ + signal(SIGTERM, signal_catcher); +#endif +} + +#endif + + +/* + * Optional progress monitor: display a percent-done figure on stderr. + */ + +#ifdef PROGRESS_REPORT + +METHODDEF(void) +progress_monitor (j_common_ptr cinfo) +{ + cd_progress_ptr prog = (cd_progress_ptr) cinfo->progress; + int total_passes = prog->pub.total_passes + prog->total_extra_passes; + int percent_done = (int) (prog->pub.pass_counter*100L/prog->pub.pass_limit); + + if (percent_done != prog->percent_done) { + prog->percent_done = percent_done; + if (total_passes > 1) { + fprintf(stderr, "\rPass %d/%d: %3d%% ", + prog->pub.completed_passes + prog->completed_extra_passes + 1, + total_passes, percent_done); + } else { + fprintf(stderr, "\r %3d%% ", percent_done); + } + fflush(stderr); + } +} + + +GLOBAL(void) +start_progress_monitor (j_common_ptr cinfo, cd_progress_ptr progress) +{ + /* Enable progress display, unless trace output is on */ + if (cinfo->err->trace_level == 0) { + progress->pub.progress_monitor = progress_monitor; + progress->completed_extra_passes = 0; + progress->total_extra_passes = 0; + progress->percent_done = -1; + cinfo->progress = &progress->pub; + } +} + + +GLOBAL(void) +end_progress_monitor (j_common_ptr cinfo) +{ + /* Clear away progress display */ + if (cinfo->err->trace_level == 0) { + fprintf(stderr, "\r \r"); + fflush(stderr); + } +} + +#endif + + +/* + * Case-insensitive matching of possibly-abbreviated keyword switches. + * keyword is the constant keyword (must be lower case already), + * minchars is length of minimum legal abbreviation. + */ + +GLOBAL(boolean) +keymatch (char * arg, const char * keyword, int minchars) +{ + register int ca, ck; + register int nmatched = 0; + + while ((ca = *arg++) != '\0') { + if ((ck = *keyword++) == '\0') + return FALSE; /* arg longer than keyword, no good */ + if (isupper(ca)) /* force arg to lcase (assume ck is already) */ + ca = tolower(ca); + if (ca != ck) + return FALSE; /* no good */ + nmatched++; /* count matched characters */ + } + /* reached end of argument; fail if it's too short for unique abbrev */ + if (nmatched < minchars) + return FALSE; + return TRUE; /* A-OK */ +} + + +/* + * Routines to establish binary I/O mode for stdin and stdout. + * Non-Unix systems often require some hacking to get out of text mode. + */ + +GLOBAL(FILE *) +read_stdin (void) +{ + FILE * input_file = stdin; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdin), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdin\n"); + exit(EXIT_FAILURE); + } +#endif + return input_file; +} + + +GLOBAL(FILE *) +write_stdout (void) +{ + FILE * output_file = stdout; + +#ifdef USE_SETMODE /* need to hack file mode? */ + setmode(fileno(stdout), O_BINARY); +#endif +#ifdef USE_FDOPEN /* need to re-open in binary mode? */ + if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) { + fprintf(stderr, "Cannot reopen stdout\n"); + exit(EXIT_FAILURE); + } +#endif + return output_file; +} diff --git a/src/libs/jpeg/cdjpeg.h b/src/libs/jpeg/cdjpeg.h new file mode 100644 index 0000000000..ed024ac3ae --- /dev/null +++ b/src/libs/jpeg/cdjpeg.h @@ -0,0 +1,187 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/src/libs/jpeg/rdswitch.c b/src/libs/jpeg/rdswitch.c new file mode 100644 index 0000000000..7a839af7a4 --- /dev/null +++ b/src/libs/jpeg/rdswitch.c @@ -0,0 +1,365 @@ +/* + * rdswitch.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to process some of cjpeg's more complicated + * command-line switches. Switches processed here are: + * -qtables file Read quantization tables from text file + * -scans file Read scan script from text file + * -quality N[,N,...] Set quality ratings + * -qslots N[,N,...] Set component quantization table selectors + * -sample HxV[,HxV,...] Set component sampling factors + */ + +#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */ +#include /* to declare isdigit(), isspace() */ + + +LOCAL(int) +text_getc (FILE * file) +/* Read next char, skipping over any comments (# to end of line) */ +/* A comment/newline sequence is returned as a newline */ +{ + register int ch; + + ch = getc(file); + if (ch == '#') { + do { + ch = getc(file); + } while (ch != '\n' && ch != EOF); + } + return ch; +} + + +LOCAL(boolean) +read_text_integer (FILE * file, long * result, int * termchar) +/* Read an unsigned decimal integer from a file, store it in result */ +/* Reads one trailing character after the integer; returns it in termchar */ +{ + register int ch; + register long val; + + /* Skip any leading whitespace, detect EOF */ + do { + ch = text_getc(file); + if (ch == EOF) { + *termchar = ch; + return FALSE; + } + } while (isspace(ch)); + + if (! isdigit(ch)) { + *termchar = ch; + return FALSE; + } + + val = ch - '0'; + while ((ch = text_getc(file)) != EOF) { + if (! isdigit(ch)) + break; + val *= 10; + val += ch - '0'; + } + *result = val; + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline) +/* Read a set of quantization tables from the specified file. + * The file is plain ASCII text: decimal numbers with whitespace between. + * Comments preceded by '#' may be included in the file. + * There may be one to NUM_QUANT_TBLS tables in the file, each of 64 values. + * The tables are implicitly numbered 0,1,etc. + * NOTE: does not affect the qslots mapping, which will default to selecting + * table 0 for luminance (or primary) components, 1 for chrominance components. + * You must use -qslots if you want a different component->table mapping. + */ +{ + FILE * fp; + int tblno, i, termchar; + long val; + unsigned int table[DCTSIZE2]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open table file %s\n", filename); + return FALSE; + } + tblno = 0; + + while (read_text_integer(fp, &val, &termchar)) { /* read 1st element of table */ + if (tblno >= NUM_QUANT_TBLS) { + fprintf(stderr, "Too many tables in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[0] = (unsigned int) val; + for (i = 1; i < DCTSIZE2; i++) { + if (! read_text_integer(fp, &val, &termchar)) { + fprintf(stderr, "Invalid table data in file %s\n", filename); + fclose(fp); + return FALSE; + } + table[i] = (unsigned int) val; + } + jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno], + force_baseline); + tblno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + fclose(fp); + return TRUE; +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(boolean) +read_scan_integer (FILE * file, long * result, int * termchar) +/* Variant of read_text_integer that always looks for a non-space termchar; + * this simplifies parsing of punctuation in scan scripts. + */ +{ + register int ch; + + if (! read_text_integer(file, result, termchar)) + return FALSE; + ch = *termchar; + while (ch != EOF && isspace(ch)) + ch = text_getc(file); + if (isdigit(ch)) { /* oops, put it back */ + if (ungetc(ch, file) == EOF) + return FALSE; + ch = ' '; + } else { + /* Any separators other than ';' and ':' are ignored; + * this allows user to insert commas, etc, if desired. + */ + if (ch != EOF && ch != ';' && ch != ':') + ch = ' '; + } + *termchar = ch; + return TRUE; +} + + +GLOBAL(boolean) +read_scan_script (j_compress_ptr cinfo, char * filename) +/* Read a scan script from the specified text file. + * Each entry in the file defines one scan to be emitted. + * Entries are separated by semicolons ';'. + * An entry contains one to four component indexes, + * optionally followed by a colon ':' and four progressive-JPEG parameters. + * The component indexes denote which component(s) are to be transmitted + * in the current scan. The first component has index 0. + * Sequential JPEG is used if the progressive-JPEG parameters are omitted. + * The file is free format text: any whitespace may appear between numbers + * and the ':' and ';' punctuation marks. Also, other punctuation (such + * as commas or dashes) can be placed between numbers if desired. + * Comments preceded by '#' may be included in the file. + * Note: we do very little validity checking here; + * jcmaster.c will validate the script parameters. + */ +{ + FILE * fp; + int scanno, ncomps, termchar; + long val; + jpeg_scan_info * scanptr; +#define MAX_SCANS 100 /* quite arbitrary limit */ + jpeg_scan_info scans[MAX_SCANS]; + + if ((fp = fopen(filename, "r")) == NULL) { + fprintf(stderr, "Can't open scan definition file %s\n", filename); + return FALSE; + } + scanptr = scans; + scanno = 0; + + while (read_scan_integer(fp, &val, &termchar)) { + if (scanno >= MAX_SCANS) { + fprintf(stderr, "Too many scans defined in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr->component_index[0] = (int) val; + ncomps = 1; + while (termchar == ' ') { + if (ncomps >= MAX_COMPS_IN_SCAN) { + fprintf(stderr, "Too many components in one scan in file %s\n", + filename); + fclose(fp); + return FALSE; + } + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->component_index[ncomps] = (int) val; + ncomps++; + } + scanptr->comps_in_scan = ncomps; + if (termchar == ':') { + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ss = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Se = (int) val; + if (! read_scan_integer(fp, &val, &termchar) || termchar != ' ') + goto bogus; + scanptr->Ah = (int) val; + if (! read_scan_integer(fp, &val, &termchar)) + goto bogus; + scanptr->Al = (int) val; + } else { + /* set non-progressive parameters */ + scanptr->Ss = 0; + scanptr->Se = DCTSIZE2-1; + scanptr->Ah = 0; + scanptr->Al = 0; + } + if (termchar != ';' && termchar != EOF) { +bogus: + fprintf(stderr, "Invalid scan entry format in file %s\n", filename); + fclose(fp); + return FALSE; + } + scanptr++, scanno++; + } + + if (termchar != EOF) { + fprintf(stderr, "Non-numeric data in file %s\n", filename); + fclose(fp); + return FALSE; + } + + if (scanno > 0) { + /* Stash completed scan list in cinfo structure. + * NOTE: for cjpeg's use, JPOOL_IMAGE is the right lifetime for this data, + * but if you want to compress multiple images you'd want JPOOL_PERMANENT. + */ + scanptr = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + scanno * SIZEOF(jpeg_scan_info)); + MEMCOPY(scanptr, scans, scanno * SIZEOF(jpeg_scan_info)); + cinfo->scan_info = scanptr; + cinfo->num_scans = scanno; + } + + fclose(fp); + return TRUE; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +GLOBAL(boolean) +set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline) +/* Process a quality-ratings parameter string, of the form + * N[,N,...] + * If there are more q-table slots than parameters, the last value is replicated. + */ +{ + int val = 75; /* default value */ + int tblno; + char ch; + + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + /* Convert user 0-100 rating to percentage scaling */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining factors to last value */ + cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val); + } + } + jpeg_default_qtables(cinfo, force_baseline); + return TRUE; +} + + +GLOBAL(boolean) +set_quant_slots (j_compress_ptr cinfo, char *arg) +/* Process a quantization-table-selectors parameter string, of the form + * N[,N,...] + * If there are more components than parameters, the last value is replicated. + */ +{ + int val = 0; /* default table # */ + int ci; + char ch; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c", &val, &ch) < 1) + return FALSE; + if (ch != ',') /* syntax check */ + return FALSE; + if (val < 0 || val >= NUM_QUANT_TBLS) { + fprintf(stderr, "JPEG quantization tables are numbered 0..%d\n", + NUM_QUANT_TBLS-1); + return FALSE; + } + cinfo->comp_info[ci].quant_tbl_no = val; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to last table */ + cinfo->comp_info[ci].quant_tbl_no = val; + } + } + return TRUE; +} + + +GLOBAL(boolean) +set_sample_factors (j_compress_ptr cinfo, char *arg) +/* Process a sample-factors parameter string, of the form + * HxV[,HxV,...] + * If there are more components than parameters, "1x1" is assumed for the rest. + */ +{ + int ci, val1, val2; + char ch1, ch2; + + for (ci = 0; ci < MAX_COMPONENTS; ci++) { + if (*arg) { + ch2 = ','; /* if not set by sscanf, will be ',' */ + if (sscanf(arg, "%d%c%d%c", &val1, &ch1, &val2, &ch2) < 3) + return FALSE; + if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */ + return FALSE; + if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) { + fprintf(stderr, "JPEG sampling factors must be 1..4\n"); + return FALSE; + } + cinfo->comp_info[ci].h_samp_factor = val1; + cinfo->comp_info[ci].v_samp_factor = val2; + while (*arg && *arg++ != ',') /* advance to next segment of arg string */ + ; + } else { + /* reached end of parameter, set remaining components to 1x1 sampling */ + cinfo->comp_info[ci].h_samp_factor = 1; + cinfo->comp_info[ci].v_samp_factor = 1; + } + } + return TRUE; +} diff --git a/src/libs/jpeg/transupp.c b/src/libs/jpeg/transupp.c new file mode 100644 index 0000000000..4060544828 --- /dev/null +++ b/src/libs/jpeg/transupp.c @@ -0,0 +1,1583 @@ +/* + * transupp.c + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains image transformation routines and other utility code + * used by the jpegtran sample application. These are NOT part of the core + * JPEG library. But we keep these routines separate from jpegtran.c to + * ease the task of maintaining jpegtran-like programs that have other user + * interfaces. + */ + +/* Although this file really shouldn't have access to the library internals, + * it's helpful to let it call jround_up() and jcopy_block_row(). + */ +#define JPEG_INTERNALS + +#include "jinclude.h" +#include "jpeglib.h" +#include "transupp.h" /* My own external interface */ +#include /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JCOEFPTR ptr1, ptr2; + JCOEF temp1, temp2; + jpeg_component_info *compptr; + + /* Horizontal mirroring of DCT blocks is accomplished by swapping + * pairs of blocks in-place. Within a DCT block, we perform horizontal + * mirroring by changing the signs of odd-numbered columns. + * Partial iMCUs at the right edge are left untouched. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ + for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { + ptr1 = buffer[offset_y][blk_x]; + ptr2 = buffer[offset_y][comp_width - blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + temp1 = *ptr1; /* swap even column */ + temp2 = *ptr2; + *ptr1++ = temp2; + *ptr2++ = temp1; + temp1 = *ptr1; /* swap odd column with sign change */ + temp2 = *ptr2; + *ptr1++ = -temp2; + *ptr2++ = -temp1; + } + } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Vertical flip */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* We output into a separate array because we can't touch different + * rows of the source virtual array simultaneously. Otherwise, this + * is a pretty straightforward analog of horizontal flip. + * Within a DCT block, vertical mirroring is done by changing the signs + * of odd-numbered rows. + * Partial iMCUs at the bottom edge are copied verbatim. + */ + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge blocks will be copied verbatim. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + /* copy even row */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + /* copy odd row with sign change */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } else { + /* Just copy row verbatim. */ + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transpose source into destination */ +{ + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Transposing pixels within a block just requires transposing the + * DCT coefficients. + * Partial iMCUs at the edges require no special treatment; we simply + * process all the available DCT blocks for every component. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } +} + + +LOCAL(void) +do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 90 degree rotation is equivalent to + * 1. Transposing the image; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) right edge properly. They just get transposed and + * not mirrored. + */ + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 270 degree rotation is equivalent to + * 1. Horizontal mirroring; + * 2. Transposing the image. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) bottom edge properly. They just get transposed and + * not mirrored. + */ + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 180 degree rotation is equivalent to + * 1. Vertical mirroring; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the vertically mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge rows are only mirrored horizontally. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } + } + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } + } else { + /* Remaining rows are just mirrored horizontally. */ + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } + } +} + + +LOCAL(void) +do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transverse transpose is equivalent to + * 1. 180 degree rotation; + * 2. Transposition; + * or + * 1. Horizontal mirroring; + * 2. Transposition; + * 3. Horizontal mirroring. + * These steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + i++; + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Right-edge blocks are mirrored in y only */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } + } else { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Bottom-edge blocks are mirrored in x only */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* At lower right corner, just transpose, no mirroring */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } + } +} + + +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * x{+-}{+-} + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / info->iMCU_sample_width; + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / info->iMCU_sample_width) + info->output_width = MCU_cols * info->iMCU_sample_width; +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / info->iMCU_sample_height; + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / info->iMCU_sample_height) + info->output_height = MCU_rows * info->iMCU_sample_height; +} + + +/* Request any required workspace. + * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * + * We allocate the workspace virtual arrays from the source decompression + * object, so that all the arrays (both the original data and the workspace) + * will be taken into account while making memory management decisions. + * Hence, this routine must be called after jpeg_read_header (which reads + * the image dimensions) and before jpeg_read_coefficients (which realizes + * the source's virtual arrays). + * + * This function returns FALSE right away if -perfect is given + * and transformation is not perfect. Otherwise returns TRUE. + */ + +GLOBAL(boolean) +jtransform_request_workspace (j_decompress_ptr srcinfo, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *coef_arrays; + boolean need_workspace, transpose_it; + jpeg_component_info *compptr; + JDIMENSION xoffset, yoffset; + JDIMENSION width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int ci, h_samp_factor, v_samp_factor; + + /* Determine number of components in output image */ + if (info->force_grayscale && + srcinfo->jpeg_color_space == JCS_YCbCr && + srcinfo->num_components == 3) + /* We'll only process the first component */ + info->num_components = 1; + else + /* Process all the components */ + info->num_components = srcinfo->num_components; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(srcinfo); + + /* Return right away if -perfect is given and transformation is not perfect. + */ + if (info->perfect) { + if (info->num_components == 1) { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->min_DCT_h_scaled_size, + srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } else { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } + } + + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->output_height; + info->output_height = srcinfo->output_width; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + } + break; + default: + info->output_width = srcinfo->output_width; + info->output_height = srcinfo->output_height; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + } + break; + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_xoffset >= info->output_width || + info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + if (info->crop_width_set == JCROP_UNSET) + info->crop_width = info->output_width - info->crop_xoffset; + if (info->crop_height_set == JCROP_UNSET) + info->crop_height = info->output_height - info->crop_yoffset; + /* Ensure parameters are valid */ + if (info->crop_width <= 0 || info->crop_width > info->output_width || + info->crop_height <= 0 || info->crop_height > info->output_height || + info->crop_xoffset > info->output_width - info->crop_width || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set == JCROP_NEG) + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + else + xoffset = info->crop_xoffset; + if (info->crop_yoffset_set == JCROP_NEG) + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + else + yoffset = info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + info->output_width = + info->crop_width + (xoffset % info->iMCU_sample_width); + info->output_height = + info->crop_height + (yoffset % info->iMCU_sample_height); + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / info->iMCU_sample_width; + info->y_crop_offset = yoffset / info->iMCU_sample_height; + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; + case JXFORM_FLIP_H: + if (info->trim) + trim_right_edge(info, srcinfo->output_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ + break; + case JXFORM_FLIP_V: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->output_height); + trim_bottom_edge(info, srcinfo->output_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->output_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->output_width); + trim_bottom_edge(info, srcinfo->output_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_ROT_270: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { + coef_arrays = (jvirt_barray_ptr *) + (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_width, + (long) info->iMCU_sample_width); + height_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_height, + (long) info->iMCU_sample_height); + for (ci = 0; ci < info->num_components; ci++) { + compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; + coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); + } + info->workspace_coef_arrays = coef_arrays; + } else + info->workspace_coef_arrays = NULL; + + return TRUE; +} + + +/* Transpose destination image parameters */ + +LOCAL(void) +transpose_critical_parameters (j_compress_ptr dstinfo) +{ + int tblno, i, j, ci, itemp; + jpeg_component_info *compptr; + JQUANT_TBL *qtblptr; + JDIMENSION jtemp; + UINT16 qtemp; + + /* Transpose image dimensions */ + jtemp = dstinfo->image_width; + dstinfo->image_width = dstinfo->image_height; + dstinfo->image_height = jtemp; + itemp = dstinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; + dstinfo->min_DCT_v_scaled_size = itemp; + + /* Transpose sampling factors */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + itemp = compptr->h_samp_factor; + compptr->h_samp_factor = compptr->v_samp_factor; + compptr->v_samp_factor = itemp; + } + + /* Transpose quantization tables */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + qtblptr = dstinfo->quant_tbl_ptrs[tblno]; + if (qtblptr != NULL) { + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < i; j++) { + qtemp = qtblptr->quantval[i*DCTSIZE+j]; + qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; + qtblptr->quantval[j*DCTSIZE+i] = qtemp; + } + } + } + } +} + + +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ + +LOCAL(void) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) +{ + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; + + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; + } + + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); + } + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); +} + + +/* Adjust output image parameters as needed. + * + * This must be called after jpeg_copy_critical_parameters() + * and before jpeg_write_coefficients(). + * + * The return value is the set of virtual coefficient arrays to be written + * (either the ones allocated by jtransform_request_workspace, or the + * original source data arrays). The caller will need to pass this value + * to jpeg_write_coefficients(). + */ + +GLOBAL(jvirt_barray_ptr *) +jtransform_adjust_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + /* If force-to-grayscale is requested, adjust destination parameters */ + if (info->force_grayscale) { + /* First, ensure we have YCbCr or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) + */ + if (((dstinfo->jpeg_color_space == JCS_YCbCr && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ + int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; + jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); + dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; + } else { + /* Sorry, can't do it */ + ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); + } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; + } + + /* Correct the destination's image dimensions as necessary + * for rotate/flip, resize, and crop operations. + */ + dstinfo->jpeg_width = info->output_width; + dstinfo->jpeg_height = info->output_height; + + /* Transpose destination image parameters */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + transpose_critical_parameters(dstinfo); + break; + default: + break; + } + + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->jpeg_width != srcinfo->image_width || + dstinfo->jpeg_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->jpeg_width, dstinfo->jpeg_height); + } + + /* Return the appropriate output data set */ + if (info->workspace_coef_arrays != NULL) + return info->workspace_coef_arrays; + return src_coef_arrays; +} + + +/* Execute the actual transformation, if any. + * + * This must be called *after* jpeg_write_coefficients, because it depends + * on jpeg_write_coefficients to have computed subsidiary values such as + * the per-component width and height fields in the destination object. + * + * Note that some transformations will modify the source data arrays! + */ + +GLOBAL(void) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_FLIP_H: + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); + break; + case JXFORM_FLIP_V: + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSPOSE: + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSVERSE: + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_90: + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_180: + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_270: + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + } +} + +/* jtransform_perfect_transform + * + * Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + * + * Inputs: + * image_width, image_height: source image dimensions. + * MCU_width, MCU_height: pixel dimensions of MCU. + * transform: transformation identifier. + * Parameter sources from initialized jpeg_struct + * (after reading source header): + * image_width = cinfo.image_width + * image_height = cinfo.image_height + * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size + * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size + * Result: + * TRUE = perfect transformation possible + * FALSE = perfect transformation not possible + * (may use custom action then) + */ + +GLOBAL(boolean) +jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform) +{ + boolean result = TRUE; /* initialize TRUE */ + + switch (transform) { + case JXFORM_FLIP_H: + case JXFORM_ROT_270: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + break; + case JXFORM_FLIP_V: + case JXFORM_ROT_90: + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + case JXFORM_TRANSVERSE: + case JXFORM_ROT_180: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + default: + break; + } + + return result; +} + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* Setup decompression object to save desired markers in memory. + * This must be called before jpeg_read_header() to have the desired effect. + */ + +GLOBAL(void) +jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) +{ +#ifdef SAVE_MARKERS_SUPPORTED + int m; + + /* Save comments except under NONE option */ + if (option != JCOPYOPT_NONE) { + jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); + } + /* Save all types of APPn markers iff ALL option */ + if (option == JCOPYOPT_ALL) { + for (m = 0; m < 16; m++) + jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); + } +#endif /* SAVE_MARKERS_SUPPORTED */ +} + +/* Copy markers saved in the given source object to the destination object. + * This should be called just after jpeg_start_compress() or + * jpeg_write_coefficients(). + * Note that those routines will have written the SOI, and also the + * JFIF APP0 or Adobe APP14 markers if selected. + */ + +GLOBAL(void) +jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option) +{ + jpeg_saved_marker_ptr marker; + + /* In the current implementation, we don't actually need to examine the + * option flag here; we just copy everything that got saved. + * But to avoid confusion, we do not output JFIF and Adobe APP14 markers + * if the encoder library already wrote one. + */ + for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { + if (dstinfo->write_JFIF_header && + marker->marker == JPEG_APP0 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x4A && + GETJOCTET(marker->data[1]) == 0x46 && + GETJOCTET(marker->data[2]) == 0x49 && + GETJOCTET(marker->data[3]) == 0x46 && + GETJOCTET(marker->data[4]) == 0) + continue; /* reject duplicate JFIF */ + if (dstinfo->write_Adobe_marker && + marker->marker == JPEG_APP0+14 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x41 && + GETJOCTET(marker->data[1]) == 0x64 && + GETJOCTET(marker->data[2]) == 0x6F && + GETJOCTET(marker->data[3]) == 0x62 && + GETJOCTET(marker->data[4]) == 0x65) + continue; /* reject duplicate Adobe */ +#ifdef NEED_FAR_POINTERS + /* We could use jpeg_write_marker if the data weren't FAR... */ + { + unsigned int i; + jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); + for (i = 0; i < marker->data_length; i++) + jpeg_write_m_byte(dstinfo, marker->data[i]); + } +#else + jpeg_write_marker(dstinfo, marker->marker, + marker->data, marker->data_length); +#endif + } +} diff --git a/src/libs/jpeg/transupp.h b/src/libs/jpeg/transupp.h new file mode 100644 index 0000000000..7c16c19c44 --- /dev/null +++ b/src/libs/jpeg/transupp.h @@ -0,0 +1,210 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the JPEG format: the upper + * left corner of the selected region must fall on an iMCU boundary. If this + * does not hold for the given crop parameters, we silently move the upper left + * corner up and/or left to make it so, simultaneously increasing the region + * dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive, or negative. (Negative width or height makes no sense, though.) + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option));