diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/de.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/de.catkeys new file mode 100644 index 0000000000..d610703e8c --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/de.catkeys @@ -0,0 +1,14 @@ +1 german x-vnd.Haiku-MatchHeader 1251743113 + ConfigView + ConfigView +Delete message ConfigView Nachricht löschen +If ConfigView Wenn +Move to ConfigView Verschieben nach +Reply with ConfigView Antworten von Konto +Set as read ConfigView Als gelesen markieren +Set flags to ConfigView Status setzen auf +Then ConfigView Dann +has ConfigView enthält +header (e.g. Subject) ConfigView Kopfzeile (z. B. Subject) +this field is based on the action ConfigView dieses Feld ist abhängig von der Aktion +value (use REGEX: in from of regular expressions like *spam*) ConfigView Wert (REGEX nutzen: reguläre Ausdrücke wie *spam*) diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/fi.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/fi.catkeys new file mode 100644 index 0000000000..9a35830a71 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/fi.catkeys @@ -0,0 +1,14 @@ +1 finnish x-vnd.Haiku-MatchHeader 1251743113 + ConfigView + ConfigView +Delete message ConfigView Poista viesti +If ConfigView Jos +Move to ConfigView Siirrä kohtaan +Reply with ConfigView Vastaa +Set as read ConfigView Aseta luetuksi +Set flags to ConfigView Aseta lipuksi +Then ConfigView Sitten +has ConfigView on +header (e.g. Subject) ConfigView otsake (esim. Aihe) +this field is based on the action ConfigView tämä kenttä perustuu toimintoon +value (use REGEX: in from of regular expressions like *spam*) ConfigView arvo (käytä REGEX-ohjelmisto: säännöllisistä lausekkeista kuten *spam*) diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/ja.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/ja.catkeys new file mode 100644 index 0000000000..bbee021244 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/ja.catkeys @@ -0,0 +1,14 @@ +1 japanese x-vnd.Haiku-MatchHeader 1251743113 + ConfigView <アカウントを選択> + ConfigView <動作を選択> +Delete message ConfigView メッセージを削除する +If ConfigView 条件: +Move to ConfigView に移動する +Reply with ConfigView 返事を書く +Set as read ConfigView 既読にする +Set flags to ConfigView フラグを指定する +Then ConfigView ならば +has ConfigView が +header (e.g. Subject) ConfigView ヘッダ(たとえばSubject) +this field is based on the action ConfigView ここは動作によって意味が変わります +value (use REGEX: in from of regular expressions like *spam*) ConfigView 値(REGEXの使用: *spam*のような正規表現の形で記述) diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/sv.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/sv.catkeys new file mode 100644 index 0000000000..72537ae691 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/match_header/sv.catkeys @@ -0,0 +1,14 @@ +1 swedish x-vnd.Haiku-MatchHeader 1251743113 + ConfigView + ConfigView +Delete message ConfigView Radera meddelande +If ConfigView Om +Move to ConfigView Flytta till +Reply with ConfigView Svara med +Set as read ConfigView Markera som läst +Set flags to ConfigView Markera som +Then ConfigView Då +has ConfigView har +header (e.g. Subject) ConfigView huvud (ex Rubrik) +this field is based on the action ConfigView detta fält är baserat på åtgärden +value (use REGEX: in from of regular expressions like *spam*) ConfigView värde (använd reguljära uttryck i format som *skräppost*) diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/de.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/de.catkeys new file mode 100644 index 0000000000..beaeb2d91b --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/de.catkeys @@ -0,0 +1,12 @@ +1 german x-vnd.Haiku-NewMailNotification 3157747612 +Alert ConfigView Hinweisfenster +Beep ConfigView Piepton +Central alert ConfigView Hinweisfenster (alle Konten) +Central beep ConfigView Piepton (alle Konten) +Keyboard LEDs ConfigView Tastatur-LEDs +Log window ConfigView Statusfenster +Method: ConfigView Methode: +New messages filter Neue Nachrichten +You have %num new message for %name. filter %num neue Nachricht für %name. +You have %num new messages for %name. filter %num neue Nachrichten für %name. +new message filter neue Nachricht diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/fi.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/fi.catkeys new file mode 100644 index 0000000000..53b6349e29 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/fi.catkeys @@ -0,0 +1,12 @@ +1 finnish x-vnd.Haiku-NewMailNotification 3157747612 +Alert ConfigView Hälytys +Beep ConfigView Piip +Central alert ConfigView Keskeinen hälytys +Central beep ConfigView Keskeinen piip +Keyboard LEDs ConfigView Näppäimistön ledit +Log window ConfigView Loki-ikkuna +Method: ConfigView Metodi: +New messages filter Uudet viestit +You have %num new message for %name. filter Sinulle on %num uutta viestiä käyttäjälle %name. +You have %num new messages for %name. filter Sinulle on %num uusi viesti käyttäjälle %name. +new message filter uusi viesti diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/ja.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/ja.catkeys new file mode 100644 index 0000000000..d6fb4fc095 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/ja.catkeys @@ -0,0 +1,12 @@ +1 japanese x-vnd.Haiku-NewMailNotification 3157747612 +Alert ConfigView 警告ウィンドウ +Beep ConfigView ビープ音 +Central alert ConfigView 警告ウィンドウ (すべてのアカウント) +Central beep ConfigView ビープ音 (すべてのアカウント) +Keyboard LEDs ConfigView キーボードLED +Log window ConfigView ログウインドウ +Method: ConfigView 方法： +New messages filter 新着メッセージ +You have %num new message for %name. filter %name より\n%num 通のメッセージが届きました。 +You have %num new messages for %name. filter %name より\n%num 通のメッセージが届きました。 +new message filter 新着メッセージ diff --git a/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/sv.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/sv.catkeys new file mode 100644 index 0000000000..2d72dcad8c --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_filters/notifier/sv.catkeys @@ -0,0 +1,10 @@ +1 swedish x-vnd.Haiku-NewMailNotification 2884037131 +Alert ConfigView Avisering +Beep ConfigView Pip +Central alert ConfigView Central avisering +Central beep ConfigView Centralt pip +Keyboard LEDs ConfigView Tangentbords LEDs +Log window ConfigView Loggfönster +Method: ConfigView Metod: +New messages filter Nya meddelanden +new message filter nytt meddelande diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/de.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/de.catkeys new file mode 100644 index 0000000000..3af656ed0c --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/de.catkeys @@ -0,0 +1,9 @@ +1 german x-vnd.Haiku-IMAP 3892875357 +Apply IMAPFolderConfig Anwenden +Destination: imap_config Zielverzeichnis: +Failed to fetch available storage. IMAPFolderConfig Keine der vorhandenen Ablagen konnte übertragen werden. +Fetching IMAP folders, have patience... IMAPFolderConfig IMAP-Ordner werden angefordert. Bitte warten… +IMAP Folders IMAPFolderConfig IMAP-Ordner +IMAP Folders imap_config IMAP-Ordner +Subcribe / Unsuscribe IMAP folders, have patience... IMAPFolderConfig IMAP-Ordner werden abonniert/abbestellt. Bitte warten… +status IMAPFolderConfig Status diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/fi.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/fi.catkeys new file mode 100644 index 0000000000..b6ebbab773 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/fi.catkeys @@ -0,0 +1,9 @@ +1 finnish x-vnd.Haiku-IMAP 3892875357 +Apply IMAPFolderConfig Sovella +Destination: imap_config Kohde: +Failed to fetch available storage. IMAPFolderConfig Saatavilla olevan tallennuspaikan noutaminen epäonnistui. +Fetching IMAP folders, have patience... IMAPFolderConfig Noudetaan IMAP-kansioita, ole kärsivällinen... +IMAP Folders IMAPFolderConfig IMAP-kansiot +IMAP Folders imap_config IMAP-kansiot +Subcribe / Unsuscribe IMAP folders, have patience... IMAPFolderConfig Tilaa IMAP-kansiot/ Lopeta IMAP-kansioiden tilaus, ole kärsivällinen... +status IMAPFolderConfig tila diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/ja.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/ja.catkeys new file mode 100644 index 0000000000..992fb44193 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/ja.catkeys @@ -0,0 +1,9 @@ +1 japanese x-vnd.Haiku-IMAP 3892875357 +Apply IMAPFolderConfig 適用 +Destination: imap_config メッセージの保存先: +Failed to fetch available storage. IMAPFolderConfig 使用可能な容量の取得に失敗しました。 +Fetching IMAP folders, have patience... IMAPFolderConfig IMAPフォルダーを取得しています。しばらくお待ちください… +IMAP Folders IMAPFolderConfig IMAPフォルダー +IMAP Folders imap_config IMAPフォルダー +Subcribe / Unsuscribe IMAP folders, have patience... IMAPFolderConfig IMAPフォルダーの購読/購読解除処理を実行しています。しばらくお待ちください。 +status IMAPFolderConfig 状態 diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/sv.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/sv.catkeys new file mode 100644 index 0000000000..807924e146 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/imap/sv.catkeys @@ -0,0 +1,9 @@ +1 swedish x-vnd.Haiku-IMAP 3892875357 +Apply IMAPFolderConfig Använd +Destination: imap_config Mål: +Failed to fetch available storage. IMAPFolderConfig Misslyckades att hämta tillgängligt lagringsutrymme. +Fetching IMAP folders, have patience... IMAPFolderConfig Hämtar IMAP mappar, vänligen vänta... +IMAP Folders IMAPFolderConfig IMAP mappar +IMAP Folders imap_config IMAP mappar +Subcribe / Unsuscribe IMAP folders, have patience... IMAPFolderConfig Prenumererar/avprenumererar på IMAP mappar, vänligen vänta... +status IMAPFolderConfig status diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/de.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/de.catkeys new file mode 100644 index 0000000000..2fcc2e1e70 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/de.catkeys @@ -0,0 +1,16 @@ +1 german x-vnd.Haiku-POP3 704219375 +. The server said:\n pop3 . Servermeldung:\n +: Connection refused or host not found pop3 : Verbindung abgelehnt oder Host nicht gefunden +: Could not allocate socket. pop3 : Socket konnte nicht reserviert werden. +: No reply.\n pop3 : Keine Antwort.\n +: The server does not support APOP. pop3 : APOP wird vom Server nicht unterstützt. +Connect to server… pop3 Mit Server verbinden… +Connecting to POP3 server… pop3 Mit POP3-Server verbinden… +Destination: ConfigView Zielverzeichnis: +Error while authenticating user pop3 Authentifizierung des Benutzers fehlgeschlagen +Error while connecting to server pop3 Verbindung mit Server fehlgeschlagen +Getting UniqueIDs… pop3 UniqueIDs werden empfangen… +Getting mailbox size… pop3 Postfachgröße wird ermittelt… +Sending APOP authentication… pop3 APOP-Authentifizierung wird gesendet… +Sending password… pop3 Passwort wird gesendet… +Sending username… pop3 Benutzername wird gesendet… diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/fi.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/fi.catkeys new file mode 100644 index 0000000000..542a7325aa --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/fi.catkeys @@ -0,0 +1,16 @@ +1 finnish x-vnd.Haiku-POP3 704219375 +. The server said:\n pop3 . Palvelin sanoi:\n +: Connection refused or host not found pop3 : Yhteys torjuttiin tai tietonetta ei löytynyt. +: Could not allocate socket. pop3 : Ei voitu varata pistoketta. +: No reply.\n pop3 : Ei vastausta.\n +: The server does not support APOP. pop3 : Palvelin ei tue APOP-yhteyskäytäntöä. +Connect to server… pop3 Yhdistetetään palvelimeen... +Connecting to POP3 server… pop3 Yhdistetään POP3-palvelimelle... +Destination: ConfigView Kohde: +Error while authenticating user pop3 Virhe todennettaessa käyttäjää +Error while connecting to server pop3 Virhe yhdistettäessä palvelimeen +Getting UniqueIDs… pop3 Haetaan UniqueID-tunnisteita... +Getting mailbox size… pop3 Haetaan sähköpostilaatikon koko... +Sending APOP authentication… pop3 Lähetetään APOP-todennus... +Sending password… pop3 Lähetetään salasana... +Sending username… pop3 Lähetetään käyttäjänimi... diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/ja.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/ja.catkeys new file mode 100644 index 0000000000..cb8a4d65b4 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/ja.catkeys @@ -0,0 +1,16 @@ +1 japanese x-vnd.Haiku-POP3 704219375 +. The server said:\n pop3 サーバーからのメッセージです\n +: Connection refused or host not found pop3 接続が拒否されたかサーバーが見つかりません。 +: Could not allocate socket. pop3 ソケットを割り当てることができませんでした。 +: No reply.\n pop3 返答がありません。\n +: The server does not support APOP. pop3 サーバーはAPOPをサポートしていません +Connect to server… pop3 サーバーに接続しました… +Connecting to POP3 server… pop3 POP3サーバーに接続しています... +Destination: ConfigView メッセージの保存先： +Error while authenticating user pop3 ユーザー認証中にエラーが発生しました。 +Error while connecting to server pop3 サーバーに接続中にエラーが発生しました。 +Getting UniqueIDs… pop3 固有のIDを取得中... +Getting mailbox size… pop3 メールボックスのサイズを取得しています... +Sending APOP authentication… pop3 APOP認証情報を送信中... +Sending password… pop3 パスワード送信中... +Sending username… pop3 ユーザーID送信中... diff --git a/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/sv.catkeys b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/sv.catkeys new file mode 100644 index 0000000000..c342ed8ce8 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/inbound_protocols/pop3/sv.catkeys @@ -0,0 +1,16 @@ +1 swedish x-vnd.Haiku-POP3 704219375 +. The server said:\n pop3 . Servern sa:\n +: Connection refused or host not found pop3 : Anslutningen nekades eller så saknas värden +: Could not allocate socket. pop3 : Kunde inte skapa socket. +: No reply.\n pop3 : Inget svar.\n +: The server does not support APOP. pop3 : Servern stöder inte APOP. +Connect to server… pop3 Anslut till server... +Connecting to POP3 server… pop3 Ansluter till POP3 servern... +Destination: ConfigView Mål: +Error while authenticating user pop3 Fel vid verifiering av användaren +Error while connecting to server pop3 Fel vid anslutning till servern +Getting UniqueIDs… pop3 Hämtar unika id'n... +Getting mailbox size… pop3 Hämtar e-postkontots storlek... +Sending APOP authentication… pop3 Skickar APOP verifiering... +Sending password… pop3 Skickar lösenord... +Sending username… pop3 Skickar användarnamn... diff --git a/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/be.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/be.catkeys new file mode 100644 index 0000000000..4f24b81d77 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/be.catkeys @@ -0,0 +1,3 @@ +1 belarusian x-vnd.Haiku-Fortune 3616007799 +Fortune file: ConfigView Файл цытатаў: +Tag line: ConfigView Радок: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/de.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/de.catkeys new file mode 100644 index 0000000000..d346a65cba --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/de.catkeys @@ -0,0 +1,3 @@ +1 german x-vnd.Haiku-Fortune 3616007799 +Fortune file: ConfigView Sprüche-Datei: +Tag line: ConfigView Einleitung: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/fi.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/fi.catkeys new file mode 100644 index 0000000000..b6ea63fdf9 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/fi.catkeys @@ -0,0 +1,3 @@ +1 finnish x-vnd.Haiku-Fortune 3616007799 +Fortune file: ConfigView Fortune-tiedosto: +Tag line: ConfigView Tunnisterivi: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/ja.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/ja.catkeys new file mode 100644 index 0000000000..831d4954c9 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_filters/fortune/ja.catkeys @@ -0,0 +1,3 @@ +1 japanese x-vnd.Haiku-Fortune 3616007799 +Fortune file: ConfigView Fortuneファイル: +Tag line: ConfigView 見出し: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/de.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/de.catkeys new file mode 100644 index 0000000000..a578228725 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/de.catkeys @@ -0,0 +1,13 @@ +1 german x-vnd.Haiku-SMTP 1882880201 +. The server said:\n smtp . Servermeldung:\n +. The server says:\n smtp . Servermeldung:\n +: Connection refused or host not found. smtp : Verbindung abgelehnt oder Host nicht gefunden. +Connecting to server… smtp Mit Server verbinden… +Destination: ConfigView Zielverzeichnis: +ESMTP ConfigView ESMTP +Error while logging in to smtp Fehler beim Anmelden an +Error while opening connection to smtp Fehler beim Verbinden mit +None ConfigView Keine +POP3 authentication failed. The server said:\n smtp POP3-Authentifizierung fehlgeschlagen. Servermeldung:\n +POP3 before SMTP ConfigView POP3 vor SMTP +SMTP server: ConfigView SMTP-Server: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/fi.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/fi.catkeys new file mode 100644 index 0000000000..844783de0e --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/fi.catkeys @@ -0,0 +1,13 @@ +1 finnish x-vnd.Haiku-SMTP 1882880201 +. The server said:\n smtp . Palvelin sanoi:\n +. The server says:\n smtp . Palvelin sanoo:\n +: Connection refused or host not found. smtp : Yhteys torjuttiin tai tietokonetta ei löytynyt. +Connecting to server… smtp Yhdistetään palvelimeen... +Destination: ConfigView Kohde: +ESMTP ConfigView ESMTP +Error while logging in to smtp Virhe kirjauduttuessa kohteeseen +Error while opening connection to smtp Virhe avattaessa yhteyttä kohteeseen +None ConfigView Ei mitään +POP3 authentication failed. The server said:\n smtp POP3-todennus epäonnistui. Palvelin sanoi:\n +POP3 before SMTP ConfigView POP3-yhteyskäytäntö ennen SMTP-yhteyskäytäntöä +SMTP server: ConfigView SMTP-palvelin: diff --git a/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/ja.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/ja.catkeys new file mode 100644 index 0000000000..f83d439bcc --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/ja.catkeys @@ -0,0 +1,13 @@ +1 japanese x-vnd.Haiku-SMTP 1882880201 +. The server said:\n smtp サーバーからのメッセージです\n +. The server says:\n smtp サーバーからのメッセージです\n +: Connection refused or host not found. smtp 接続が拒否されたかサーバーが見つかりません。 +Connecting to server… smtp 接続中... +Destination: ConfigView ローカルフォルダー： +ESMTP ConfigView ESMTP +Error while logging in to smtp ログイン中にエラーが発生しました。 +Error while opening connection to smtp 接続中にエラーが発生しました。 +None ConfigView 無し +POP3 authentication failed. The server said:\n smtp POP3認証に失敗しました。\n +POP3 before SMTP ConfigView 送信前に受信する +SMTP server: ConfigView SMTPサーバー： diff --git a/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/sv.catkeys b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/sv.catkeys new file mode 100644 index 0000000000..b5f4108131 --- /dev/null +++ b/data/catalogs/add-ons/mail_daemon/outbound_protocols/smtp/sv.catkeys @@ -0,0 +1,13 @@ +1 swedish x-vnd.Haiku-SMTP 1882880201 +. The server said:\n smtp . Servern sa:\n +. The server says:\n smtp . Servern säger:\n +: Connection refused or host not found. smtp : Anslutningen nekades eller så saknas värden. +Connecting to server… smtp Ansluter till server... +Destination: ConfigView Mål: +ESMTP ConfigView ESMTP +Error while logging in to smtp Fel vid inloggning till +Error while opening connection to smtp Fel vid skapande av anslutning till +None ConfigView Ingen +POP3 authentication failed. The server said:\n smtp POP3 verifiering misslyckades. Servern sa:\n +POP3 before SMTP ConfigView POP3 före SMTP +SMTP server: ConfigView SMTP server: diff --git a/data/catalogs/add-ons/translators/jpeg/be.catkeys b/data/catalogs/add-ons/translators/jpeg/be.catkeys index 9ec73fea6e..451f07d29d 100644 --- a/data/catalogs/add-ons/translators/jpeg/be.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/be.catkeys @@ -1,18 +1,13 @@ -1 belarusian x-vnd.Haiku-JPEGTranslator 226512890 +1 belarusian x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Пра праграму Be Bitmap Format (JPEGTranslator) JPEGTranslator Фармат бітмапу BeOS (канвертар JPEG) -ExposureTime exit_parser Час экспазіцыі High JPEGTranslator Ныйвышэйшая -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Памылка бібліятэкі JPEG: %s\n JPEG Library Warning: %s\n be_jerror Папярэджанне бібліятэкі JPEG: %s\n JPEG images JPEGTranslator Выявы JPEG Low JPEGTranslator Нізкая Make file smaller (sligthtly worse quality) JPEGTranslator Зрабіць файл меншым (магчыма страта якасці) -Maker exit_parser Маркер -Model exit_parser Мадэль None JPEGTranslator Адсутнічае -Orientation exit_parser Арыентацыя Output quality JPEGTranslator Якасьць выніку Output smoothing strength JPEGTranslator Інтэнсыўнасць згладжвання Prevent colors 'washing out' JPEGTranslator Прадухіляць страту 'насычанасці' колераў diff --git a/data/catalogs/add-ons/translators/jpeg/cs.catkeys b/data/catalogs/add-ons/translators/jpeg/cs.catkeys index 81d81328fe..9f2fba42f4 100644 --- a/data/catalogs/add-ons/translators/jpeg/cs.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/cs.catkeys @@ -1,18 +1,13 @@ -1 czech x-vnd.Haiku-JPEGTranslator 226512890 +1 czech x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator O programu Be Bitmap Format (JPEGTranslator) JPEGTranslator Formát Be Bitmap (JPEGPřekladač) -ExposureTime exit_parser Čas expozice High JPEGTranslator Vysoká -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Chyba knihovny JPEG: %s\n JPEG Library Warning: %s\n be_jerror Varování knihovny JPEG: %s\n JPEG images JPEGTranslator obrázky JPEG Low JPEGTranslator Nízká Make file smaller (sligthtly worse quality) JPEGTranslator Menší soubor (v trošičku horší kvalitě) -Maker exit_parser Autor -Model exit_parser Model None JPEGTranslator Žádný -Orientation exit_parser Orientace Output quality JPEGTranslator Výstupní kvalita Output smoothing strength JPEGTranslator Síla výstupního vyhlazení Prevent colors 'washing out' JPEGTranslator Předejít "vymytí" barev diff --git a/data/catalogs/add-ons/translators/jpeg/de.catkeys b/data/catalogs/add-ons/translators/jpeg/de.catkeys index a73eee774f..c2272340eb 100644 --- a/data/catalogs/add-ons/translators/jpeg/de.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/de.catkeys @@ -1,18 +1,13 @@ -1 german x-vnd.Haiku-JPEGTranslator 226512890 +1 german x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Über Be Bitmap Format (JPEGTranslator) JPEGTranslator Be-Bitmap-Format (JPEGTranslator) -ExposureTime exit_parser Belichtungszeit High JPEGTranslator Hoch -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror JPEG-Bibliothek, Fehler: %s\n JPEG Library Warning: %s\n be_jerror JPEG-Bibliothek, Warnung: %s\n JPEG images JPEGTranslator JPEG-Bilder Low JPEGTranslator Niedrig Make file smaller (sligthtly worse quality) JPEGTranslator Kleinere Dateien (mit etwas schlechterer Qualität) -Maker exit_parser Ersteller -Model exit_parser Modell None JPEGTranslator Keine -Orientation exit_parser Ausrichtung Output quality JPEGTranslator Ausgabequalität Output smoothing strength JPEGTranslator Glättung Prevent colors 'washing out' JPEGTranslator 'Ausgewaschene' Farben verhindern diff --git a/data/catalogs/add-ons/translators/jpeg/fr.catkeys b/data/catalogs/add-ons/translators/jpeg/fr.catkeys index 18c90f3aea..4fb2918678 100644 --- a/data/catalogs/add-ons/translators/jpeg/fr.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/fr.catkeys @@ -1,18 +1,13 @@ -1 french x-vnd.Haiku-JPEGTranslator 226512890 +1 french x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator À propos Be Bitmap Format (JPEGTranslator) JPEGTranslator Format Bitmap Be (Traducteur JPEG) -ExposureTime exit_parser Temps d'exposition High JPEGTranslator Haute -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Erreur de la bibliothèque JPEG : %s\n JPEG Library Warning: %s\n be_jerror Avertissement de la bibliothèque JPEG : %s\n JPEG images JPEGTranslator Images JPEG Low JPEGTranslator Basse Make file smaller (sligthtly worse quality) JPEGTranslator Créer un fichier plus petit (qualité légèrement moindre) -Maker exit_parser Créateur -Model exit_parser Modèle None JPEGTranslator Aucune -Orientation exit_parser Orientation Output quality JPEGTranslator Qualité de sortie Output smoothing strength JPEGTranslator Force du lissage en sortie Prevent colors 'washing out' JPEGTranslator Éviter les couleurs « délavées » diff --git a/data/catalogs/add-ons/translators/jpeg/it.catkeys b/data/catalogs/add-ons/translators/jpeg/it.catkeys index d221c584f0..8a699fb84f 100644 --- a/data/catalogs/add-ons/translators/jpeg/it.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/it.catkeys @@ -1,18 +1,13 @@ -1 italian x-vnd.Haiku-JPEGTranslator 226512890 +1 italian x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Informazioni Be Bitmap Format (JPEGTranslator) JPEGTranslator Be Bitmap Formato (JPEGTranslator) -ExposureTime exit_parser Tempo di esposizione High JPEGTranslator Alto -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror JPEG libreria errore: %s\n JPEG Library Warning: %s\n be_jerror JPEG Libreria avviso: %s\n JPEG images JPEGTranslator JPEG immagini Low JPEGTranslator Basso Make file smaller (sligthtly worse quality) JPEGTranslator Rendi i file più piccoli (qualità leggermente peggiore) -Maker exit_parser Costruttore -Model exit_parser Modello None JPEGTranslator Nessuno -Orientation exit_parser Orientamento Output quality JPEGTranslator Output di qualità Output smoothing strength JPEGTranslator Output smoothing strength Prevent colors 'washing out' JPEGTranslator Previeni dilavamento colori diff --git a/data/catalogs/add-ons/translators/jpeg/ja.catkeys b/data/catalogs/add-ons/translators/jpeg/ja.catkeys index b50588f62e..af1b0b0f4f 100644 --- a/data/catalogs/add-ons/translators/jpeg/ja.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/ja.catkeys @@ -1,18 +1,13 @@ -1 japanese x-vnd.Haiku-JPEGTranslator 226512890 +1 japanese x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator JPEG Translatorについて Be Bitmap Format (JPEGTranslator) JPEGTranslator Be ビットマップフォーマット (JPEGTranslator) -ExposureTime exit_parser 露出時間 High JPEGTranslator 高い -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror JPEG ライブラリエラー: %s\n JPEG Library Warning: %s\n be_jerror JPEG ライブラリの警告: %s\n JPEG images JPEGTranslator JPEGイメージ Low JPEGTranslator 低い Make file smaller (sligthtly worse quality) JPEGTranslator ファイルサイズを小さくする (品質は少し悪くなります) -Maker exit_parser メーカー -Model exit_parser モデル None JPEGTranslator 無し -Orientation exit_parser 向き Output quality JPEGTranslator 出力品質 Output smoothing strength JPEGTranslator スムージング強度 Prevent colors 'washing out' JPEGTranslator 色が 'washing out' されないようにする diff --git a/data/catalogs/add-ons/translators/jpeg/pt_br.catkeys b/data/catalogs/add-ons/translators/jpeg/pt_br.catkeys index cac0269db4..09b415764a 100644 --- a/data/catalogs/add-ons/translators/jpeg/pt_br.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/pt_br.catkeys @@ -1,18 +1,13 @@ -1 brazilian_portuguese x-vnd.Haiku-JPEGTranslator 226512890 +1 brazilian_portuguese x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Sobre Be Bitmap Format (JPEGTranslator) JPEGTranslator Formato de Bitmap Be (JPEGTranslator) -ExposureTime exit_parser Tempo de exposição High JPEGTranslator Alto -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Erro na biblioteca JPEG: %s\n JPEG Library Warning: %s\n be_jerror Aviso da biblioteca JPEG: %s\n JPEG images JPEGTranslator Imagens JPEG Low JPEGTranslator Baixo Make file smaller (sligthtly worse quality) JPEGTranslator Compactar arquivo (diminui a qualidade) -Maker exit_parser Criador -Model exit_parser Modelo None JPEGTranslator Nenhum -Orientation exit_parser Orientação Output quality JPEGTranslator Qualidade de saída Output smoothing strength JPEGTranslator Suavização Prevent colors 'washing out' JPEGTranslator Prevenir cores 'lavadas' diff --git a/data/catalogs/add-ons/translators/jpeg/ro.catkeys b/data/catalogs/add-ons/translators/jpeg/ro.catkeys index 7a00e9b122..33a97b6a54 100644 --- a/data/catalogs/add-ons/translators/jpeg/ro.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/ro.catkeys @@ -1,18 +1,13 @@ -1 romanian x-vnd.Haiku-JPEGTranslator 797380431 +1 romanian x-vnd.Haiku-JPEGTranslator 1536577076 About JPEGTranslator Despre Be Bitmap Format (JPEGTranslator) JPEGTranslator Format imagine Be (TraducătorJPEG) -ExposureTime exit_parser TimpExpunere High JPEGTranslator Sus -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Eroare bibliotecă JPEG: %s\n JPEG Library Warning: %s\n be_jerror Avertisment bibliotecă JPEG: %s\n JPEG images JPEGTranslator Imagini JPEG Low JPEGTranslator Jos Make file smaller (sligthtly worse quality) JPEGTranslator Micșorează fișierul (calitate mai scăzută) -Maker exit_parser Fabricant -Model exit_parser Model None JPEGTranslator Nimic -Orientation exit_parser Orientare Output quality JPEGTranslator Calitatea rezultatului Output smoothing strength JPEGTranslator Produce putere de netezire Prevent colors 'washing out' JPEGTranslator Previne „spălarea” culorilor diff --git a/data/catalogs/add-ons/translators/jpeg/ru.catkeys b/data/catalogs/add-ons/translators/jpeg/ru.catkeys index d392c02762..5b7c3002c5 100644 --- a/data/catalogs/add-ons/translators/jpeg/ru.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/ru.catkeys @@ -1,18 +1,13 @@ -1 russian x-vnd.Haiku-JPEGTranslator 226512890 +1 russian x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Авторы Be Bitmap Format (JPEGTranslator) JPEGTranslator Растровый формат Be (JPEGTranslator) -ExposureTime exit_parser Экспозиция High JPEGTranslator Высокое -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Ошибка библиотеки JPEG: %s\n JPEG Library Warning: %s\n be_jerror Предупреждение библиотеки JPEG: %s\n JPEG images JPEGTranslator JPEG изображения Low JPEGTranslator Низкое Make file smaller (sligthtly worse quality) JPEGTranslator Делать файл меньше (немного худшего качества) -Maker exit_parser Создатель -Model exit_parser Модель None JPEGTranslator Нет -Orientation exit_parser Ориентация Output quality JPEGTranslator Качество вывода Output smoothing strength JPEGTranslator Сглаживание вывода Prevent colors 'washing out' JPEGTranslator Предотвращать 'размывание' цветов diff --git a/data/catalogs/add-ons/translators/jpeg/sv.catkeys b/data/catalogs/add-ons/translators/jpeg/sv.catkeys index e2d8d35c5d..fe04d044d6 100644 --- a/data/catalogs/add-ons/translators/jpeg/sv.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/sv.catkeys @@ -1,18 +1,13 @@ -1 swedish x-vnd.Haiku-JPEGTranslator 226512890 +1 swedish x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator Om Be Bitmap Format (JPEGTranslator) JPEGTranslator Be bitmappsformat (JPEG-översättare) -ExposureTime exit_parser Exponeringstid High JPEGTranslator Hög -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror JPEG bibliotekvarning: %s\n JPEG Library Warning: %s\n be_jerror JPEG bibliotekvarning: %s\n JPEG images JPEGTranslator JPEG-bilder Low JPEGTranslator Låg Make file smaller (sligthtly worse quality) JPEGTranslator Gör filen mindre (med något sämre kvalitet) -Maker exit_parser Skapare -Model exit_parser Modell None JPEGTranslator Ingen -Orientation exit_parser Orientering Output quality JPEGTranslator Bildkvalitet Output smoothing strength JPEGTranslator Bildutjämningsstyrka Prevent colors 'washing out' JPEGTranslator Förhindra att färger mattas diff --git a/data/catalogs/add-ons/translators/jpeg/uk.catkeys b/data/catalogs/add-ons/translators/jpeg/uk.catkeys index 8cd23cb562..e93c4e4a1a 100644 --- a/data/catalogs/add-ons/translators/jpeg/uk.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/uk.catkeys @@ -1,16 +1,11 @@ -1 ukrainian x-vnd.Haiku-JPEGTranslator 1699433362 +1 ukrainian x-vnd.Haiku-JPEGTranslator 2438630007 About JPEGTranslator Про Be Bitmap Format (JPEGTranslator) JPEGTranslator Формат Be Bitmap (Перетворювач JPEG) -ExposureTime exit_parser Час витримки High JPEGTranslator Високе -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror Помилка бібліотеки JPEG: %s\n Low JPEGTranslator Низьке Make file smaller (sligthtly worse quality) JPEGTranslator Зробити файл меньшим (можлива втрата якості) -Maker exit_parser Маркер -Model exit_parser Модель None JPEGTranslator Жоден -Orientation exit_parser Розташування Output quality JPEGTranslator Вихідна якість Output smoothing strength JPEGTranslator Інтенсивність зглажування Prevent colors 'washing out' JPEGTranslator попереджати втрату 'насичення' кольорів diff --git a/data/catalogs/add-ons/translators/jpeg/zh_hans.catkeys b/data/catalogs/add-ons/translators/jpeg/zh_hans.catkeys index e4208fa31d..0e1db8f2e7 100644 --- a/data/catalogs/add-ons/translators/jpeg/zh_hans.catkeys +++ b/data/catalogs/add-ons/translators/jpeg/zh_hans.catkeys @@ -1,18 +1,13 @@ -1 simplified_chinese x-vnd.Haiku-JPEGTranslator 226512890 +1 simplified_chinese x-vnd.Haiku-JPEGTranslator 965709535 About JPEGTranslator 关于 Be Bitmap Format (JPEGTranslator) JPEGTranslator Be 位图格式（JPEG转换器 -ExposureTime exit_parser 暴露时间 High JPEGTranslator 高 -ISO exit_parser ISO JPEG Library Error: %s\n be_jerror JPEG 二进制错误：%s\n JPEG Library Warning: %s\n be_jerror JPEG 二进制警告：%s\n JPEG images JPEGTranslator JPEG 图像 Low JPEGTranslator 低 Make file smaller (sligthtly worse quality) JPEGTranslator 创建较小文件（较差的质量） -Maker exit_parser 制造商 -Model exit_parser 模式 None JPEGTranslator 无 -Orientation exit_parser 方位 Output quality JPEGTranslator 输出质量 Output smoothing strength JPEGTranslator 输出平滑力量 Prevent colors 'washing out' JPEGTranslator 阻止颜色 'washing out' diff --git a/data/catalogs/apps/aboutsystem/sk.catkeys b/data/catalogs/apps/aboutsystem/sk.catkeys index b86e0697c5..4a3a8d5991 100644 --- a/data/catalogs/apps/aboutsystem/sk.catkeys +++ b/data/catalogs/apps/aboutsystem/sk.catkeys @@ -1,11 +1,10 @@ -1 slovak x-vnd.Haiku-About 3149623567 +1 slovak x-vnd.Haiku-About 2446894321 %.2f GHz AboutView %.2f GHz %d MiB total AboutView %d MiB celkom %d MiB used (%d%%) AboutView %d MiB využitých (%d%%) %ld MHz AboutView %ld MHz %ld Processors: AboutView %ld procesory: %total MiB total, %inaccessible MiB inaccessible AboutView %total MiB celkom, %inaccessible MiB neprístupných -... and the many people making donations!\n\n AboutView ... a mnohí ďalších, ktorí prispeli dotáciou!\n\n About this system AboutWindow O tomto systéme Contributors:\n AboutView Prispievatelia:\n Current maintainers:\n AboutView Aktívni vývojári:\n @@ -21,7 +20,6 @@ Processor: AboutView Procesor: Revision AboutView Revízia: Source Code: AboutView Zdrojový kód: The BeGeistert team\n AboutView Tím BeGeistert\n -The Haiku-Ports team\n AboutView T9m Haiku-Ports\n The Haikuware team and their bounty program\n AboutView Tím Haikuware a ich program odmien\n The University of Auckland and Christof Lutteroth\n\n AboutView University of Auckland a Christof Lutteroth\n\n The code that is unique to Haiku, especially the kernel and all code that applications may link against, is distributed under the terms of the %MIT licence%. Some system libraries contain third party code distributed under the LGPL license. You can find the copyrights to third party code below.\n\n AboutView Kód, ktorý je charakteristický pre Haiku, najmä jadro a kód, ktorý využívajú aplikácie môže byť šírený za podmienok %MIT licence%. Niektoré systémové knižnice obsahujú kód tretích strán šírený pod licenciou LGPL. Autorské práva tretích strán nájdete uvedené nižšie. diff --git a/data/catalogs/apps/codycam/fi.catkeys b/data/catalogs/apps/codycam/fi.catkeys index 421ffcd667..374f214b66 100644 --- a/data/catalogs/apps/codycam/fi.catkeys +++ b/data/catalogs/apps/codycam/fi.catkeys @@ -17,7 +17,7 @@ Capture Rate Menu CodyCam Kaappaustaajusvalikko Capture controls CodyCam Kaappausohjaimet Capturing Image… VideoConsumer.cpp Kaapataan kuva… Closing the window\n VideoConsumer.cpp Suljetaan ikkuna\n -CodyCam Application name Cody-kamera +CodyCam System name Cody-kamera Connected… VideoConsumer.cpp Yhdistetty… Couldn't find requested directory on server VideoConsumer.cpp Ei kyetty löytämään pyydettyä hakemistoa palvelimelta Directory: CodyCam Hakemisto: diff --git a/data/catalogs/apps/installer/be.catkeys b/data/catalogs/apps/installer/be.catkeys index 70e54a65c0..b86cd3711f 100644 --- a/data/catalogs/apps/installer/be.catkeys +++ b/data/catalogs/apps/installer/be.catkeys @@ -1,4 +1,4 @@ -1 belarusian x-vnd.Haiku-Installer 3669711461 +1 belarusian x-vnd.Haiku-Installer 1384722558 %1ld of %2ld InstallerWindow number of files copied %1ld з %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Калі вы ўсталёўваеце Haiku на рэальнае жалеза (не на эмулятар), мы рэкамендуем загадзя падрыхтаваць падзел на дыску.Усталёўшчык і утыліта DriveSetup дапамогуць усталяваць на падзеле родную для Haiku файлавую сістэму, але опыці па змене цякучай табліцы падзелаў яшчэ недадакова пратэсціраваныя, таму іх ужыванне не рэкамендуецца.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2)Усталёўшчык зробіць падзел Haiku загрузачным, але не дадасць Haiku да вашага меню загрузкі. Калі у вас ужо ўсталяваны GRUB, вы можаце самастойна дадаць Haiku да яго меню. Гэта робіцца па-рознаму у залежнасці ад вашай версіі загрузчыка.\n\n\n @@ -46,7 +46,6 @@ Install from: InstallerWindow Усталяваць з: Install progress: InstallerWindow Прагрэс усталёўкі: Installation canceled. InstallProgress Усталёўка адмененая. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Усталёўка завершана. Загрузачны сектар запісаны ў '%s'.Націсніце Выйсці, каб пакінуць усталёўшчык ці абраць іншы том для новай усталёўкі. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Усталёўка завершана. Загрузачны сектар запісаны ў '%s'.Націсніце Выйсці, каб перазапусціць кампутар ці абраць іншы том для новай усталёўкі. Installer System name Усталёўшчык Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\tАўтары: Jérôme Duval, Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Запусціце утыліту DriveSetup каб размеціць\nдаступныя дыскі.\nПадзелы могуць быць ініцыялізаваны файлавай сістэмай\nBe File System, патрэбнай для загрузачнага падзелу Haiku. diff --git a/data/catalogs/apps/installer/cs.catkeys b/data/catalogs/apps/installer/cs.catkeys index 5dfdc8e7f6..6523138122 100644 --- a/data/catalogs/apps/installer/cs.catkeys +++ b/data/catalogs/apps/installer/cs.catkeys @@ -1,4 +1,4 @@ -1 czech x-vnd.Haiku-Installer 1325705101 +1 czech x-vnd.Haiku-Installer 3335683494 %1ld of %2ld InstallerWindow number of files copied %1ld z %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Pokud instalujete Haiku na opravdový hardware (nikoliv v emulátoru), je doporučeno abyste již měli na pevném disku oddíl připravený. Instalátor a nástroj DriveSetup umožňují inicializovat existující oddíly nativním souborovým systémem Haiku, ale možnosti měnit aktuální rozložení oddílů nemusely být dosud testovány na dostatečném počtu různých počítačových konfigurací. Proto jejich používání nedoporučujeme.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Instalátor nastaví oddíl Haiku jako startovací, ale nevykoná žádné kroky pro integraci Haiku do existující nabídky zavaděče. Pokud již máte GRUB nainstalovaný, můžete Haiku přidat do jeho nabídky. V závislosti na verzi GRUBu, kterou používáte, se to dělá odlišně.\n\n\n @@ -43,7 +43,6 @@ Install from: InstallerWindow Instalovat z: Install progress: InstallerWindow Průběh instalace: Installation canceled. InstallProgress Instalace zrušena. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Instalace dokončena. Boot sektor byl zapsán do '%s'. Stiskněte Zavřít pro opuštění Instalátoru nebo zvolte nový cílový svazek ke spuštění další instalace. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Instalace dokončena. Boot sektor byl zapsán do '%s'. Stiskněte Zavřít pro restartování počítače nebo zvolte nový cílový svazek ke spuštění další instalace. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Instalátor\n\tnapsal Jérôme Duval a Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Spustí nástor DriveSetup pro rozdělení\npevných disků a jiných zařízení.\nOddíly mohou být inicializovány pomocí\nsouborového systému Be vyžadovaného jako startovací oddíl pro Haiku. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp Poznámka: Zatímco způsob pojmenování pevných disků je stále takový, jako je popsáno v 2.1), schéma pojmenování se změnilo. diff --git a/data/catalogs/apps/installer/de.catkeys b/data/catalogs/apps/installer/de.catkeys index 3c0254eaf3..84085ab6c4 100644 --- a/data/catalogs/apps/installer/de.catkeys +++ b/data/catalogs/apps/installer/de.catkeys @@ -1,4 +1,4 @@ -1 german x-vnd.Haiku-Installer 3669711461 +1 german x-vnd.Haiku-Installer 3852628561 %1ld of %2ld InstallerWindow number of files copied %1ld von %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Wird Haiku auf richtiger Hardware (nicht in einem Emulator) installiert, wird die vorherige Vorbereitung einer Festplattenpartition empfohlen. Der Installer und DriveSetup bieten zwar die Initialisierung bestehender Partitionen mit dem haiku-eigenen Dateisystem an. Da aber die Optionen zum Ändern des eigentlichen Partitionslayouts bisher nicht mit genügend unterschiedlichen Computerkonfigurationen getestet wurden, wird davon abgeraten.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Der Installer wird die Haiku-Partition selbst bootfähig machen, aber nichts unternehmen, um Haiku in ein bestehendes Bootmenü zu integrieren. Ist bereits GRUB installiert, kann man Haiku zu dessen Bootmenü hinzufügen. Die Vorgehensweise ist dabei abhängig von der verwendeten GRUB-Version.\n\n\n @@ -46,7 +46,7 @@ Install from: InstallerWindow Installieren von: Install progress: InstallerWindow Installationsverlauf: Installation canceled. InstallProgress Installation abgebrochen. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Installation abgeschlossen. Der Bootsektor wurde nach '%s' geschrieben. 'Beenden' klicken, um das Installationsprogramm zu verlassen, oder ein anderes Ziellaufwerk für eine weitere Installation auswählen. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installation abgeschlossen. Der Bootsektor wurde nach '%s' geschrieben. 'Beenden' klicken, um den Rechner neu zu starten, oder ein anderes Ziellaufwerk für eine weitere Installation wählen. +Installation completed. Boot sector has been written to '%s'. Press Restart to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installation abgeschlossen. Der Bootsektor wurde nach '%s' geschrieben. 'Neustarten' klicken, um den Rechner neu zu starten, oder ein anderes Ziellaufwerk für eine weitere Installation wählen. Installer System name Installer Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\tvon Jérôme Duval und Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Das Werkzeug DriveSetup starten, um\nverfügbare Laufwerke zu partitionieren.\nPartitionen können mit dem 'Be File System'\ninitialisiert werden, das für\neine Haiku-Bootpartition nötig ist. @@ -70,6 +70,7 @@ Quit Boot Manager InstallerWindow BootManager beenden Quit Boot Manager and DriveSetup InstallerWindow BootManager und DriveSetup beenden Quit DriveSetup InstallerWindow DriveSetup beenden README InstallerApp LIESMICH +Restart InstallerWindow Neustarten Restart system InstallerWindow Rechner neustarten Running Boot Manager and DriveSetup…\n\nClose both applications to continue with the installation. InstallerWindow BootManager und DriveSetup laufen...\n\nBeide Anwendungen müssen beendet werden, um mit der Installation fortzufahren. Running Boot Manager…\n\nClose Boot Manager to continue with the installation. InstallerWindow BootManager läuft...\n\nBootManager muss beendet werden, um mit der Installation fortzufahren. diff --git a/data/catalogs/apps/installer/eo.catkeys b/data/catalogs/apps/installer/eo.catkeys index f87b9b2d16..c8c3483d61 100644 --- a/data/catalogs/apps/installer/eo.catkeys +++ b/data/catalogs/apps/installer/eo.catkeys @@ -1,4 +1,4 @@ -1 esperanto x-vnd.Haiku-Installer 2179409467 +1 esperanto x-vnd.Haiku-Installer 4189387860 %1ld of %2ld InstallerWindow number of files copied %1ld el %2ld InstallerWindow No partition available Are you sure you want to abort the installation and restart the system? InstallerWindow Ĉu vi estas certa, ke vi volas nuligi la instaladon kaj restarti la sistemon? @@ -16,7 +16,6 @@ Finishing Installation. InstallProgress Kompletigante la instaladon. Install from: InstallerWindow Instali el: Install progress: InstallerWindow Instalada progreso: Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow La instalado sukcesis. La startsektoro estas skribita al '%s'. Klaku al Eliri por forigi la Instalilon aŭ elektu novan celan volumon por denove instali. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow La instalado sukcesis. La startsektoro estas skribita al '%s'. Klaku al Eliri por forigi la Instalilon aŭ elektu novan celan volumon por denove instali. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Instalilo\n\tskribita per Jérôme Duval kaj Stephan Aßmus\n\tKopirajto 2005-2010, Haiku.\n\n OK InstallProgress Bone OK InstallerApp Bone diff --git a/data/catalogs/apps/installer/fr.catkeys b/data/catalogs/apps/installer/fr.catkeys index c3e3af051b..54aceb400c 100644 --- a/data/catalogs/apps/installer/fr.catkeys +++ b/data/catalogs/apps/installer/fr.catkeys @@ -1,4 +1,4 @@ -1 french x-vnd.Haiku-Installer 3669711461 +1 french x-vnd.Haiku-Installer 1384722558 %1ld of %2ld InstallerWindow number of files copied %1ld sur %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Si vous installez Haiku sur du matériel réel (pas dans un émulateur) il vous est recommandé de préparer au préalable une partition sur votre disque dur. L'installeur et le gestionnaire de disques permettent d'initialiser des partitions existantes au système de fichier natif de Haiku, mais les options pour changer la disposition actuelle des partitions peuvent ne pas avoir été testées sur un assez grand nombre d'ordinateurs donc il n'est pas conseillé de les utiliser.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) L'installeur va rendre la partition Haiku amorçable, mais ne s'occupera pas d'intégrer Haiku à un menu de démarrage existant. Si vous avez déjà installé GRUB, vous pouvez ajouter Haiku à son menu de démarrage. Cela se fait différemment en fonction de la version de GRUB que vous utilisez.\n\n\n @@ -40,13 +40,12 @@ Have fun and thanks a lot for trying out Haiku! We hope you like it! InstallerAp Here you have to comment out the line \"GRUB_HIDDEN_TIMEOUT=0\" by putting a \"#\" in front of it in order to actually display the boot menu.\n\n InstallerApp Vous devez commenter la ligne « GRUB_HIDDEN_TIMEOUT=0 » en y ajoutant un « # » au début pour afficher le menu de démarrage.\n\n Hide optional packages InstallerWindow Cacher les paquets optionnels IMPORTANT INFORMATION BEFORE INSTALLING HAIKU\n\n InstallerApp INFORMATIONS IMPORTANTES AVANT D'INSTALLER HAIKU\n\n -If you have not created a partition yet, simply reboot, create the partition using whatever tool you feel most comfortable with, and reboot into Haiku to continue with the installation. You could for example use the GParted Live-CD, it can also resize existing partitions to make room.\n\n\n InstallerApp Si vous n'avez pas encore créé la partition, redémarrez et créez la avec votre outil préféré, puis revenez dans Haiku pour continuer l'installation. Vous pouvez pas exemple utiliser le Live-CD GParted, qui permet au besoin, de redimensionner les partitions pour faire de la place.\n\n\n +If you have not created a partition yet, simply reboot, create the partition using whatever tool you feel most comfortable with, and reboot into Haiku to continue with the installation. You could for example use the GParted Live-CD, it can also resize existing partitions to make room.\n\n\n InstallerApp Si vous n'avez pas encore créé de partition, redémarrez et créez-la avec votre outil préféré, puis revenez dans Haiku pour continuer l'installation. Vous pouvez par exemple utiliser le Live-CD GParted, qui permet au besoin, de redimensionner les partitions pour faire de la place.\n\n\n Install anyway InstallProgress Installer quand même Install from: InstallerWindow Installer depuis : Install progress: InstallerWindow Avancement de l'installation : Installation canceled. InstallProgress Installation annulée. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow L'installation est terminée. Le secteur d'amorce a été écrit sur « %s ». Cliquer sur Quitter pour sortir de l'Installeur ou choisir un nouveau volume cible pour faire une autre installation. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installation terminée. Le secteur d'amorce à été écrit sur « %s ». Cliquer sur Quitter pour redémarrer l'ordinateur ou choisir un nouveau volume cible pour faire une autre installation. Installer System name Installeur Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installeur\n\técrit par Jérôme Duval et Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Lancer le Gestionnaire de Disques pour partitionner les\ndisques durs et les autres médias disponibles.\nLes partitions peuvent être initialisées avec\nle Système de Fichiers Be indispensable pour une\npartition de démarrage Haiku. diff --git a/data/catalogs/apps/installer/hu.catkeys b/data/catalogs/apps/installer/hu.catkeys index d948a2e713..e799c9e014 100644 --- a/data/catalogs/apps/installer/hu.catkeys +++ b/data/catalogs/apps/installer/hu.catkeys @@ -1,4 +1,4 @@ -1 hungarian x-vnd.Haiku-Installer 1755458235 +1 hungarian x-vnd.Haiku-Installer 3765436628 %1ld of %2ld InstallerWindow number of files copied %1ld/%2ld InstallerWindow No partition available ?? of ?? InstallerWindow Unknown progress ??/?? @@ -27,7 +27,6 @@ Install from: InstallerWindow E lemezről: Install progress: InstallerWindow Telepítés állapota: Installation canceled. InstallProgress A telepítés félbeszakadt. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow A telepítés befejeződött! A(z) „%s” lemez bootszektora elkészült. A „Kilépés” gombbal elhagyhatja a telepítőt, vagy új partíciót választhat egy új rendszer telepítéséhez. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow A telepítés befejeződött! A(z) „%s” lemez bootszektora elkészült. A „Kilépés” gombbal elhagyhatja a telepítőt, vagy új partíciót választhat egy új rendszer telepítéséhez. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Rendszertelepítő\n\Írta Jérôme Duval és Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Indítsa el a Lemezbeállító segédprogramot a\nlétező merevlemezek és egyéb adathordozók\npartícionálásához! A partíciókat a Haiku\noperációs rendszer rendszerbetöltőjéhez\n BFS-sel (Be FájlrendSzerrel) kell inicializálni. No optional packages available. PackagesView Nincsenek a rendszer feltelepítéséhez nem feltétlenül szükséges csomagok. diff --git a/data/catalogs/apps/installer/it.catkeys b/data/catalogs/apps/installer/it.catkeys index 757665ef73..2075c7bbf0 100644 --- a/data/catalogs/apps/installer/it.catkeys +++ b/data/catalogs/apps/installer/it.catkeys @@ -1,4 +1,4 @@ -1 italian x-vnd.Haiku-Installer 1952003730 +1 italian x-vnd.Haiku-Installer 3961982123 %1ld of %2ld InstallerWindow number of files copied %1ld di %2ld 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) L'installer renderà la partizione Haiku avviabile, ma non esegue nessun passo per integrare Haiku in un menu di avvio esistente. Se avete GRUB già installato, potete aggiungere Haiku al suo menu d'avvio. Ciò ouò essere fatto in maniera differente, dipende da quale versione di GRUB utilizzate.\n\n\n 2.1) GRUB 1\n InstallerApp 2.1) GRUB 1\n @@ -40,7 +40,6 @@ Install from: InstallerWindow Installa da: Install progress: InstallerWindow Avanzamento dell'installazione: Installation canceled. InstallProgress Installazione annullata. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Installazione completa. Il settore d'avvio è stato scritto su '%s'. Premi Esci per abbandonare l'Installer oppure scegli un nuovo volume di destinazione per procedere con un'altra installazione. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installazione completa. Il settore d'avvio è stato scritto su '%s'. Premi Esci per riavviare il computer oppure scegli un nuovo volume di destinazione per procedere con un'altra installazione. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\tscritto da Jérôme Duval e Stephan Aßmus\n\tCopyright©2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Avvia l'utilità DriveSetup per creare partizioni sui dischi rigidi e altri media disponibili.\nLe partizioni possono essere inizializzate con il \nBe File System necessario per una partizione d'avvio Haiku. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp NOTA: Se la strategia di denominazione per gli hard disk è ancora come descritto al punto 2.1) lo schema di denominazione per le partizioni è cambiato.\n\n diff --git a/data/catalogs/apps/installer/ja.catkeys b/data/catalogs/apps/installer/ja.catkeys index 4075c38498..8ec079712d 100644 --- a/data/catalogs/apps/installer/ja.catkeys +++ b/data/catalogs/apps/installer/ja.catkeys @@ -1,4 +1,4 @@ -1 japanese x-vnd.Haiku-Installer 3669711461 +1 japanese x-vnd.Haiku-Installer 3852628561 %1ld of %2ld InstallerWindow number of files copied %1ld / %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Haikuを(エミュレータでなく)実機にインストールする場合は、ハードディスクのパーティションを先に用意しておくことが望ましいです。インストーラーおよびDriveSetupツールには、Haikuファイルシステムによる既存のパーティションの初期化機能があります。しかし、パーティションを作成、変更するオプションは充分な多種多様のコンピュータの構成でテストされていないため、使用を勧めません。\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) インストーラーは、Haikuのパーティションを起動可能にします。しかし、Haikuを既存のブートメニューにまとめる機能はありません。すでにGRUBがインストールされている場合、ブートメニューにHaikuを追加できます。追加作業は、使用しているGRUBのバージョンによって異なります。\n\n\n @@ -46,7 +46,7 @@ Install from: InstallerWindow インストール元： Install progress: InstallerWindow 進行状況： Installation canceled. InstallProgress インストールが中断されました。 Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow インストールが完了し、ブートセクターが '%s' に書き込まれました。終了ボタンでインストーラーを終了するか、他に Haiku をインストールするボリュームを選択してください。 -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow インストールが完了し、ブートセクターが '%s' に書き込まれました。終了ボタンでインストーラーを終了するか、他に Haiku をインストールするボリュームを選択してください。 +Installation completed. Boot sector has been written to '%s'. Press Restart to restart the computer or choose a new target volume to perform another installation. InstallerWindow インストールが完了し、ブートセクターが '%s' に書き込まれました。 再起動ボタンでコンピューターを再起動するか、他に Haiku をインストールするボリュームを選択してください。 Installer System name インストーラー Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Haiku インストーラー\n\tJérôme Duval および Stephan Aßmus 作\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow 使用可能なハードディスクおよび他のメディア上\nのパーティションを操作するツール DriveSetup\nを起動します。このツールを使って、パーティション\nを Haiku の起動に必要な Be ファイルシステム (BFS)\nで初期化します。 @@ -70,6 +70,7 @@ Quit Boot Manager InstallerWindow Boot Manager の終了 Quit Boot Manager and DriveSetup InstallerWindow Boot Manager と DriveSetup を終了 Quit DriveSetup InstallerWindow DriveSetup の終了 README InstallerApp README +Restart InstallerWindow 再起動 Restart system InstallerWindow システムを再起動 Running Boot Manager and DriveSetup…\n\nClose both applications to continue with the installation. InstallerWindow Boot Manager と DriveSetup が実行中…\n\nインストールを続けるには、両アプリケーションを閉じてください。 Running Boot Manager…\n\nClose Boot Manager to continue with the installation. InstallerWindow Boot Manager 実行中…\n\nインストールを続けるには、Boot Manager を閉じてください。 diff --git a/data/catalogs/apps/installer/ko.catkeys b/data/catalogs/apps/installer/ko.catkeys index cc57748576..7b09ac1e9d 100644 --- a/data/catalogs/apps/installer/ko.catkeys +++ b/data/catalogs/apps/installer/ko.catkeys @@ -1,4 +1,4 @@ -1 korean x-vnd.Haiku-Installer 837975173 +1 korean x-vnd.Haiku-Installer 2847953566 %1ld of %2ld InstallerWindow number of files copied %1ld 의 %2ld InstallerWindow No partition available <없음> ?? of ?? InstallerWindow Unknown progress ?? 의 ?? @@ -26,7 +26,6 @@ Install from: InstallerWindow 원본: Install progress: InstallerWindow 설치 과정: Installation canceled. InstallProgress 설치가 취소됨. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow 설치가 완료됨. 부트 섹터는 '%s'에 기록되었습니다. 나가기를 눌려서 설치프로그램을 나가거나 새로운 설치 볼륨을 선택해서 다른 설치를 할 수 있습니다. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow 설치가 완료됨. 부트 섹터는 '%s'에 기록되었습니다. 나가기를 눌려서 컴푸터를 다시 시작하거나새로운 설치 볼륨을 선택해서 다른 설치를 할 수 있습니다 Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow 사용가능한 하드디스크와 다른 미디어의 \파티션을 만들기 위해 드라이브 설정 유틸리티를 시작합니다.\n파티션은 Haiku 부트 파티션에 필요한 \nBe 파일 시스템으로 \n초기화합니다. No optional packages available. PackagesView 선택적인 패키지가 가능하지 않음. No partitions have been found that are suitable for installation. Please set up partitions and initialize at least one partition with the Be File System. InstallerWindow 설치에 적합한 어떤 파티션도 찾을 수 없습니다. 파티션을 준비해서 최소한 하나의 파티션을 Be 파일 시스템으로 초기화하십시오. diff --git a/data/catalogs/apps/installer/lt.catkeys b/data/catalogs/apps/installer/lt.catkeys index f99fe39764..74d1722370 100644 --- a/data/catalogs/apps/installer/lt.catkeys +++ b/data/catalogs/apps/installer/lt.catkeys @@ -1,4 +1,4 @@ -1 lithuanian x-vnd.Haiku-Installer 750349764 +1 lithuanian x-vnd.Haiku-Installer 2760328157 %1ld of %2ld InstallerWindow number of files copied %1ld iš %2ld InstallerWindow No partition available ?? of ?? InstallerWindow Unknown progress ?? iš ?? @@ -28,7 +28,6 @@ Install from: InstallerWindow Diegti iš: Install progress: InstallerWindow Diegimo eiga: Installation canceled. InstallProgress Diegimo atsisakyta. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Diegimas baigtas. Paleidimo sektorius įrašytas į „%s“. Spauskite „Baigti“ Diegyklės uždarymui arba rinkitės kitą skirsnį jei norite dar kur įdiegti. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Diegimas baigtas. Paleidimo sektorius įrašytas į „%s“. Spauskite „Baigti“ Diegyklės uždarymui arba rinkitės kitą skirsnį jei norite dar kur įdiegti. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Diegyklė „Installer“\n\tparašyta Jérôme'o Duval'io ir Stephan'o Aßmus'o\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Paleidžia priemonę „DriveSetup“ skirsnių tvarkymui\nprieinamose laikmenose.\nSkirsniai turi būti sužymimi kaip „Be File System“ (BFS),\ntai yra būtina Haiku paleidimo skirsniui. No optional packages available. PackagesView Papildomų paketų nėra. diff --git a/data/catalogs/apps/installer/nb.catkeys b/data/catalogs/apps/installer/nb.catkeys index 4a70bce241..3d47b6b385 100644 --- a/data/catalogs/apps/installer/nb.catkeys +++ b/data/catalogs/apps/installer/nb.catkeys @@ -1,4 +1,4 @@ -1 norwegian_bokmål x-vnd.Haiku-Installer 267668186 +1 norwegian_bokmål x-vnd.Haiku-Installer 2277646579 %1ld of %2ld InstallerWindow number of files copied %1ld av %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Hvis du installerer Haiku på selve datamaskinen (ikke i en emulator) anbefales det at du har gjort klar en partisjon på harddisken på forhånd. Installasjonsprogrammet og diskoppsettverktøyet gir deg muligheten til å initialisere eksisterende partisjoner med Haikus filsystem, men alternativene for å endre selve partisjonsoppsettet er kanskje ikke tilstrekkelig utprøvd på forskjellige datamakiner, så vi anbefaler ikke å bruke dem.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp Installasjonsprogrammet vil gjøre selve Haiku-partisjonen klar til å starte opp, men sørger ikke for å integrere Haiku i en eksisterende oppstartsmeny. Hvis du har GRUB installert fra før kan du legge Haiku til i menyen. Fremgangsmåten er forskjellig, avhengig av hvilken versjon av GRUB du bruker.\n\n\n @@ -45,7 +45,6 @@ Install from: InstallerWindow Installer fra: Install progress: InstallerWindow Fremgang: Installation canceled. InstallProgress Installasjon avbrutt. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Installasjonen er fullført. Oppstartsektor er skrevet til '%s'. Trykk Avslutt for å lukke installasjonsprogrammet, eller velg et nytt målvolum for å gjøre en ny installasjon. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installasjonen er fullført. Oppstartsektor er skrevet til '%s'. Trykk Avslutt for å starte datamaskinen på nytt, eller velg et nytt målvolum for å gjøre en ny installasjon. Installer System name Installer Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\ter skrevet av Jérôme Duval og Stephan Aßmus\n\tOpphavsrett 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Start Diskoppsett-verktøyet for å partisjonere\ntilgjengelige harddisker og andre medier.\nPartisjoner kan initialiseres med\nBe-filstystemet som er nødvendig for Haikus oppstart\npartisjon. diff --git a/data/catalogs/apps/installer/nl.catkeys b/data/catalogs/apps/installer/nl.catkeys index ca1768d541..40a23c1875 100644 --- a/data/catalogs/apps/installer/nl.catkeys +++ b/data/catalogs/apps/installer/nl.catkeys @@ -1,4 +1,4 @@ -1 dutch x-vnd.Haiku-Installer 2922170709 +1 dutch x-vnd.Haiku-Installer 637181806 %1ld of %2ld InstallerWindow number of files copied %1ld van %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Als u Haiku gaat installeren op echte hardware (dat wil zeggen: niet in een emulator), is het aan te raden om alvast een hardeschijf-partitie te hebben voorbereid. Installer en DriveSetup zijn geschikt om bestaande partities te initialiseren met Haiku's eigen bestandssysteem, maar het kan zijn dat de opties waarmee de daadwerkelijke partitie-lay-out gewijzigd kunnen worden nog niet getest zijn op een groot en gevarieerd genoeg aantal computerconfiguraties, en daarom raden we u niet aan dit te gebruiken.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Installer zal de Haiku-partitie het vermogen geven om zelf op te starten, maar neemt geen stappen om Haiku in een bestaand opstartmenu te integreren. Als u GRUB al hebt geïnstalleerd, kunt u Haiku aan diens opstartmenu toevoegen. Hoe u dit doet, hangt af van welke GRUB-versie u gebruikt; dit verschilt.\n\n\n @@ -45,7 +45,6 @@ Install from: InstallerWindow Installeer vanaf: Install progress: InstallerWindow Voortgang installatie: Installation canceled. InstallProgress Installatie geannuleerd. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Installatie is afgerond. De opstartsector werd naar '%s' geschreven. Klik op Afsluiten om de Installer te verlaten of kies een nieuwe gegevensdrager als doel voor nog een installatie. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installatie is afgerond. De opstartsector werd naar '%s' geschreven. Klik op Afsluiten om de computer te herstarten of kies een nieuwe gegevensdrager als doel voor nog een installatie. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\tdoor Jérôme Duval en Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Start het DriveSetup-programma om partities te maken\nin aanwezige harde schijven en andere media.\nPartities kunnen worden geïnitialiseerd\nmet het Be File System, dat nodig is\nvoor een Haiku-opstartpartitie. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp NB: Terwijl de naamgevingsstrategie voor harde schijven nog steeds zo is als beschreven onder 2.1) is het benamingsschema voor partities veranderd.\n\n diff --git a/data/catalogs/apps/installer/pl.catkeys b/data/catalogs/apps/installer/pl.catkeys index 4904c2be01..3da12cd746 100644 --- a/data/catalogs/apps/installer/pl.catkeys +++ b/data/catalogs/apps/installer/pl.catkeys @@ -1,4 +1,4 @@ -1 polish x-vnd.Haiku-Installer 1325705101 +1 polish x-vnd.Haiku-Installer 3335683494 %1ld of %2ld InstallerWindow number of files copied %1ld z %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Jeśli instalujesz Haiku na prawdziwej maszynie (nie przez emulator), zaleca się wcześniejsze przygotowanie partycji na dysku. Instalator i narzędzie DriveSetup potrafią zainicjalizować istniejące partycje natywnym systeme plików Haiku, ale operacje zmieniania struktury dysku nie zostały przetestowane na wystarczającej ilości komputerów, więc nie zalecamy korzystania z nich.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Instalator sprawi, że partycja Haiku stanie się partycją rozruchową, ale nie podejmie działań, aby zintegrować Haiku z aktualnie istniejącym menu rozruchu. Jeśli posiadasz zainstalowanego GRUBa, możesz dodać Haiku do jego menu rozruchu. W zależności od Twojej wersji GRUBa, robi się to w różny sposób.\n\n\n @@ -43,7 +43,6 @@ Install from: InstallerWindow Instaluj z: Install progress: InstallerWindow Postęp instalacji: Installation canceled. InstallProgress Instalacja anulowana. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Zakończono instalację. Sektor rozruchowy został zapisany do '%s'. Należy nacisnąć Zamknij, aby opuścić instalator lub wybrać nowy wolumin docelowy w celu przeprowadzenia następnej instalacji. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Zakończono instalację. Sektor rozruchowy został zapisany do '%s'. Należy nacisnąć Zakończ, aby uruchomić ponownie komputer lub wybrać nowy wolumin docelowy w celu przeprowadzenia następnej instalacji. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Instalator\n\tnapisany przez Jérôme Duval oraz Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Uruchomia narzędzie DriveSetup służące do partycjonowania\ndostępnych dysków i innych nośników.\nPartycje mogą zostać zainicjalizowane systemem plików\nBe File System, potrzebnym do poprawnego działania systemu Haiku. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp UWAGA: Podczas gdy starategia nazwenictwa dysków twardych jest wciąż taka, jak została opisana w punkcie 2.1), schemat nazewnictwa partycji nie zmienił się.\n\n diff --git a/data/catalogs/apps/installer/pt_br.catkeys b/data/catalogs/apps/installer/pt_br.catkeys index 8c0bf1a279..a19fa94d67 100644 --- a/data/catalogs/apps/installer/pt_br.catkeys +++ b/data/catalogs/apps/installer/pt_br.catkeys @@ -1,4 +1,4 @@ -1 brazilian_portuguese x-vnd.Haiku-Installer 1330828329 +1 brazilian_portuguese x-vnd.Haiku-Installer 3340806722 ??? InstallerWindow Unknown currently copied item ??? Additional disk space required: %s InstallerWindow Espaço adicional necessário em disco: %s An error was encountered and the installation was not completed:\n\nError: %s InstallerWindow Um erro foi encontrado e a instalação não foi completado:\n\nErro: %s @@ -17,7 +17,6 @@ Hide optional packages InstallerWindow Esconder items opcionais Install anyway InstallProgress Instalar mesmo assim Install progress: InstallerWindow Progresso na instalação: Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow A instalação está completa. O setor de inicialização foi escrito em '%s'. Pressione Sair para deixar o Instalador ou escolha uma nova partição para realizar outra instalação. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow A instalação está completa. O setor de inicialização foi escrito em '%s'. Pressione Sair para reiniciar o computador ou escolher uma nova partição para realizar outra instalação. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Instalador\n\desenvolvido por Jérôme Duval e Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Abrir o utilitário Configurador de Drive para particionar\nos HDs disponíveis e outras mídias.\nAs partições podem ser inicializadas com o Sistema de Arquivos\nBe necessário para uma partição de inicialização do\nHaiku. No optional packages available. PackagesView Nenhum item opcional está disponível. diff --git a/data/catalogs/apps/installer/ro.catkeys b/data/catalogs/apps/installer/ro.catkeys index 5d36749161..95abf8b758 100644 --- a/data/catalogs/apps/installer/ro.catkeys +++ b/data/catalogs/apps/installer/ro.catkeys @@ -1,4 +1,4 @@ -1 romanian x-vnd.Haiku-Installer 2649065541 +1 romanian x-vnd.Haiku-Installer 364076638 %1ld of %2ld InstallerWindow number of files copied %1ld din %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Dacă instalați Haiku pe hardware real (nu într-un emulator) este recomandat să aveți deja pregătită o partiție pe hard disc. Programul de instalare și unealta ConfigurareDriver asigură intițializarea partițiilor existente cu sistemul nativ de fișiere Haiku, dar opțiunile de a schimba aranjamentul partiției actuale s-ar putea să nu fie testate pe o varietate destul de mare de configurări ale calculatorului, prin urmare nu recomandăm să le utilizați.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Programul de instalare va face partiția Haiku bootabilă, dar nu va integra Haiku într-un meniul de boot existent. Dacă aveți deja instalat GRUB, puteți adăuga Haiku la meniul de boot al acestuia. În funcție de versiunea de GRUB pe care o utilizați, acest lucru este realizat diferit.\n\n\n @@ -34,7 +34,6 @@ Install anyway InstallProgress Instalează oricum Install from: InstallerWindow Instalează de la: Install progress: InstallerWindow Progres de instalare: Installation canceled. InstallProgress Instalare anulată. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Instalare completă. Sectorul de boot a fost scris la „%s”. Apăsați Părăsește pentru a reporni calculatorul sau alegeți un volum de destinație nou pentru a executa altă instalare. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Program de instalare\n\tscris de Jérôme Duval și Stephan Aßmus\n\tDrepturi de autor 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Porniți utilitatea ConfigurareDrive pentru a partiționa\nhard discurile disponibile și alte media.\nPartițiile pot fi inițializate cu\nsistemul de fișiere Be necesar pentru o partiție de boot\nHaiku. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp NOTĂ: În timp ce strategia de denumire pentru hard discuri este descrisă la 2.1) schema de denumire pentru partiții a fost modificată.\n\n diff --git a/data/catalogs/apps/installer/ru.catkeys b/data/catalogs/apps/installer/ru.catkeys index c0049d245c..acdd1fce58 100644 --- a/data/catalogs/apps/installer/ru.catkeys +++ b/data/catalogs/apps/installer/ru.catkeys @@ -1,4 +1,4 @@ -1 russian x-vnd.Haiku-Installer 3669711461 +1 russian x-vnd.Haiku-Installer 1384722558 %1ld of %2ld InstallerWindow number of files copied %1ld из %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Если вы устанавливаете Haiku на реальный компьютер (не в эмуляторе), то рекомендуем заранее подготовить раздел на жестком диске. Установщик и утилита разметки диска (DriveSetup) предложат инициализировать существующий раздел в родную файловую систему Haiku, но функция изменения положения разделов не была протестирована на достаточном количестве компьютеров, поэтому мы пока не рекомендуем её использовать.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Установщик сделает раздел с Haiku загрузочным, но не предпримет никаких действий для интеграции Haiku в существующее загрузочное меню. Если у вас уже установлен GRUB, то вы можете добавить Haiku в его загрузочное меню. В зависимости от версии GRUB это делается по-разному.\n\n @@ -46,7 +46,6 @@ Install from: InstallerWindow Установить с: Install progress: InstallerWindow Прогресс установки: Installation canceled. InstallProgress Установка отменена. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Установка завершена. Загрузочный сектор был записан на раздел '%s'. Нажмите \"Выход\" чтобы закрыть Установщик или выберите другой раздел, если хотите выполнить новую установку. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Установка завершена. Загрузочный сектор был записан на раздел '%s'. Нажмите \"Выход\" чтобы закрыть Установщик или выберите другой раздел, если хотите выполнить новую установку. Installer System name Установщик Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installer\n\n\tразработал Jérôme Duval и Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Запустить утилиту DriveSetup для настройки разделов\nна доступных жестких дисках или других носителях.\nРазделы могут быть инициализированы в Be File System,\nкоторая требуются для загрузочного раздела Haiku. diff --git a/data/catalogs/apps/installer/sk.catkeys b/data/catalogs/apps/installer/sk.catkeys index 40078550cd..9e24a76268 100644 --- a/data/catalogs/apps/installer/sk.catkeys +++ b/data/catalogs/apps/installer/sk.catkeys @@ -1,4 +1,4 @@ -1 slovak x-vnd.Haiku-Installer 3031650507 +1 slovak x-vnd.Haiku-Installer 746661604 %1ld of %2ld InstallerWindow number of files copied %1ld z %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Ak inštalujete Haiku na skutočný hardvér (nie v emulátore), odporúča sa, aby ste mali vopred pripravenú diskovú oblasť. Inštalátor a nástroj DriveSetup vám ponúknu inicializovať existujúce oblasti natívnym súborovým systémom Haiku, ale voľby na zmenu vlastného rozloženia oblastí neboli otestované na dostatočne rozličných konfiguráciách počítačov, preto neodporúčame ich používať. 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Inštalátor označí samotnú oblasť s Haiku ako zavádzaciu, ale nevykoná potrebné kroky na to, aby integroval Haiku do existujúceho menu zavádzača. Ak máte GRUB už nainštalovaný, môžete Haiku pridať do jeho menu. V závislosti na tom, ktorú verziu GRUB používate je postup odlišný.\n\n\n @@ -45,7 +45,6 @@ Install from: InstallerWindow Inštalovať z: Install progress: InstallerWindow Priebeh inštalácie: Installation canceled. InstallProgress Inštalácia zrušená. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Inštalácia bola dokončená. Zavádzací sektor bol zapísaný na „%s“. Stlačením „Ukončiť“ opusťte Inštalátor alebo zvoľte nový cieľový zväzok, ak chcete vykonať ďalšiu inštaláciu. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Inštalácia bola dokončená. Zavádzací sektor bol zapísaný na „%s“. Stlačením „Ukončiť“ reštartujte počítač alebo zvoľte nový cieľový zväzok, ak chcete vykonať ďalšiu inštaláciu. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Inštalátor\n\tnapísal Jérôme Duval a Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Spustiť nástroj DriveSetup na rozdelenie\ndostupných pevných diskov a ďalších médií.\nOblasti je možné inicializovať Súborovým\nsystémom Be, ktorý je vyžadovaný pre\nzavádzaciu oblasť Haiku. NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp POZN.: Hoci stratégia pomenovania pevných diskov zostáva podľa popisu v 2.1), stratégia pomenovania doskových oblastí sa zmenila.\n\n diff --git a/data/catalogs/apps/installer/sv.catkeys b/data/catalogs/apps/installer/sv.catkeys index 29447b45c0..4a4523317a 100644 --- a/data/catalogs/apps/installer/sv.catkeys +++ b/data/catalogs/apps/installer/sv.catkeys @@ -1,4 +1,4 @@ -1 swedish x-vnd.Haiku-Installer 3669711461 +1 swedish x-vnd.Haiku-Installer 1384722558 %1ld of %2ld InstallerWindow number of files copied %1ld av %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Om du installerar Haiku på riktigt hårdvara (inte i en emulator) så rekommenderar vi att har förberett en partiton för ändamålet. Programmen Installeraren och DiskHantering kan skapa nya partitioner för Haiku men funktionerna att ändra på befintliga partitoner har ännu inte testats tillräckligt för att anses som tillförlitligt. Vi rekommenderar därför att du inte ändrar på befintliga partitioner.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Installeraren kommer att göra Haikus partition startbar. Däremot kommer inte Haiku att göra några ändringar i befintliga starthanterare. Om du har GRUB installerat så bör du lägga till Haiku till startmenyn. Det görs på olika sätt beroende på vilken version av GRUB som används.\n\n\n @@ -46,7 +46,6 @@ Install from: InstallerWindow Installera från: Install progress: InstallerWindow Installationsförlopp: Installation canceled. InstallProgress Installationen avbröts. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Installationen är klar. Startsektorn har skrivits till '%s'. Klicka på Avsluta för att lämna installationsprogrammet eller välj en ny volym att installera på. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Installationen är klar. Startsektorn har skrivits till '%s'. Klicka på Avsluta för att starta om datorn eller välj en ny volym att installera på. Installer System name Installerare Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Installerare\n\tskriven av Jérôme Duval och Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Starta DiskHanteringsverktyget för att partitionera\ntillgängliga hårddiskar och annan media.\nPartitioner can formateras med Be-filsystemet\n som krävs för en Haiku boot-partition. diff --git a/data/catalogs/apps/installer/uk.catkeys b/data/catalogs/apps/installer/uk.catkeys index 2bc6bbe72b..9bd644fb6c 100644 --- a/data/catalogs/apps/installer/uk.catkeys +++ b/data/catalogs/apps/installer/uk.catkeys @@ -1,4 +1,4 @@ -1 ukrainian x-vnd.Haiku-Installer 737639835 +1 ukrainian x-vnd.Haiku-Installer 2747618228 %1ld of %2ld InstallerWindow number of files copied %1ld з %2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1) Якщо ви встановлюєте Haiku на реальному залізі (не в середині емулятора) рекомендується розбити жорсткий диск на розділи заздалегідь. Встановлювач і утиліта DriveSetup здатні до ініціалізації присутніх розділів у рідній файловій системі Haiku, але опції зміни існуючих розділів протестовані недостатньо і ми не рекомендуємо їх поки що до використання.\n 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2) Встановлювач сам зробить розділ Haiku загрузочним, але він не робить жодних кроків для інтеграції Haiku в меню завантаження. Якщо Ви маєте встановлений GRUB, то можете додати Haiku до його меню завантаження. В залежності від версії GRUB, це робиться по різному.\n\n\n @@ -39,7 +39,6 @@ Install anyway InstallProgress Встановити в будь-якому ра Install from: InstallerWindow Встановити з: Installation canceled. InstallProgress Встановлення призупинено. Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow Встановлення завершене. Завантажувальний сектор записано до '%s'. Натисніть Вихід щоб покинути Встановлювач або виберіть інший цільовий том для виконання другого встановлення. -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow Встановлення завершене. Завантажувальний сектор записано до '%s'. Натисніть Вихід для перезавантаження комп’ютера або виберіть новий цільовий том для виконання іншого встановлення. Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp Встановлювач\n\tАвтори Jérôme Duval і Stephan Aßmus\n\tCopyright 2005–2010, Haiku.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow Запустіть утиліту DriveSetup для розбиття\nдоступних вінчестерів і пристроїв.\nРозділи будуть зініціалізовані у \nBe File System необхідній для завантаження розділу з Haiku\n NOTE: While the naming strategy for hard disks is still as described under 2.1) the naming scheme for partitions has changed.\n\n InstallerApp Заувага: Хоча принцип іменування жорстких дисків такий самий, як описано в п. 2.1 іменування розділів змінилося.\n\n diff --git a/data/catalogs/apps/installer/zh_hans.catkeys b/data/catalogs/apps/installer/zh_hans.catkeys index 7355ea5e75..ff433a6fc7 100644 --- a/data/catalogs/apps/installer/zh_hans.catkeys +++ b/data/catalogs/apps/installer/zh_hans.catkeys @@ -1,4 +1,4 @@ -1 simplified_chinese x-vnd.Haiku-Installer 3669711461 +1 simplified_chinese x-vnd.Haiku-Installer 1384722558 %1ld of %2ld InstallerWindow number of files copied %1ld来源于%2ld 1) If you are installing Haiku onto real hardware (not inside an emulator) it is recommended that you have already prepared a hard disk partition. The Installer and the DriveSetup tool offer to initialize existing partitions with the Haiku native file system, but the options to change the actual partition layout may not have been tested on a sufficiently great variety of computer configurations so we do not recommend using it.\n InstallerApp 1）如果您将安装 Haiku 到真实硬件（而不是虚拟机），强烈建议您预备一个硬盘分区。系统安装器和磁盘管理器将初始化已有分区为 Haiku 原生文件系统，但是修改实际分区布局的选项还未在各种配置的计算机上进行大规模的测试，因此我们建议您不要使用它。 2) The Installer will make the Haiku partition itself bootable, but takes no steps to integrate Haiku into an existing boot menu. If you have GRUB already installed, you can add Haiku to its boot menu. Depending on what version of GRUB you use, this is done differently.\n\n\n InstallerApp 2）系统安装器能够实现 Haiku 分区的启动，但是并不能够将 Haiku 集成到已有的引导菜单。如果您安装了 GRUB，您可以添加 Haiku 到其引导菜单。对于不同的 GRUB 版本，所要执行的操作将不尽相同。 @@ -46,7 +46,6 @@ Install from: InstallerWindow 安装源： Install progress: InstallerWindow 安装进度： Installation canceled. InstallProgress 安装已取消。 Installation completed. Boot sector has been written to '%s'. Press Quit to leave the Installer or choose a new target volume to perform another installation. InstallerWindow 系统安装完成。引导扇区已经写入到 '%s'。按下“退出”关闭系统安装器或者另选分区重复安装操作。 -Installation completed. Boot sector has been written to '%s'. Press Quit to restart the computer or choose a new target volume to perform another installation. InstallerWindow 系统安装完成。引导扇区已经写入到 '%s'。按下“退出”关闭系统安装器或者另选分区重复安装操作。 Installer System name 系统安装器 Installer\n\twritten by Jérôme Duval and Stephan Aßmus\n\tCopyright 2005-2010, Haiku.\n\n InstallerApp 系统安装器\n\t编写者：Jérôme Duval 和 Stephan Aßmus \n\t版权所有 2005-2001 Haiku, Inc.\n\n Launch the DriveSetup utility to partition\navailable hard drives and other media.\nPartitions can be initialized with the\nBe File System needed for a Haiku boot\npartition. InstallerWindow 启动磁盘管理器为\n可用硬盘和其他媒介进行分区。\n分区可以初始化为 Be 文件系统以作为 Haiku 引导分区。 diff --git a/data/catalogs/apps/poorman/fi.catkeys b/data/catalogs/apps/poorman/fi.catkeys index 7baac4fafd..654a9feabe 100644 --- a/data/catalogs/apps/poorman/fi.catkeys +++ b/data/catalogs/apps/poorman/fi.catkeys @@ -34,7 +34,7 @@ Logging view PoorMan Kirjaamisnäkymä Max. simultaneous connections: PoorMan Enintään samanaikaisia yhteyksiä: OK PoorMan Valmis Please choose the folder to publish on the web.\n\nYou can have PoorMan create a default \"public_html\" in your home folder.\nOr you select one of your own folders instead. PoorMan Valitse webissä julkaistava kansio.\n\nSinulla voi olla Köyhiksen luoma oletus ”public_html” kotikansiossasi.\nTai voi sen sijaan valita yhden omista kansioistasi. -PoorMan Application name Köyhis +PoorMan System name Köyhis PoorMan settings PoorMan Köyhisasetukset Quit PoorMan Poistu Run server PoorMan Käynnistä palvelin diff --git a/data/catalogs/apps/readonlybootprompt/ro.catkeys b/data/catalogs/apps/readonlybootprompt/ro.catkeys index 0cd8ba8dbf..289b641479 100644 --- a/data/catalogs/apps/readonlybootprompt/ro.catkeys +++ b/data/catalogs/apps/readonlybootprompt/ro.catkeys @@ -1,7 +1,6 @@ -1 romanian x-vnd.Haiku-ReadOnlyBootPrompt 2544294242 +1 romanian x-vnd.Haiku-ReadOnlyBootPrompt 3274888382 Custom BootPromptWindow Personalizat Desktop (Live-CD) BootPromptWindow Birou (Live-CD) -Keymap BootPromptWindow Hartă taste Language BootPromptWindow Limbaj Run Installer BootPromptWindow Rulează Instalator Thank you for trying out Haiku! We hope you'll like it!\n\nYou can select your preferred language and keyboard layout from the list on the left which will then be used instantly. You can easily change both settings from the Desktop later on on the fly.\n\nDo you wish to run the Installer or continue booting to the Desktop?\n BootPromptWindow For other languages, a note could be added: \"Note: Localization of Haiku applications and other components is an on-going effort. You will frequently encounter untranslated strings, but if you like, you can join in the work at .\" Vă mulțumim că ați încercat Haiku! Sperăm că îl veți îndrăgi!\n\nPuteți să selectați limba preferată și aranjamentul de tastatură din lista din stânga care vor fi apoi utilizate automat. Puteți să schimbați ușor mai târziu cele două configurări de pe Desktop.\n\nDoriți să rulați Programul de instalare sau continuați să porniți sistemul?\nNotă: Localizarea aplicațiilor Haiku și a altor componente este un efort susținut. Veți întâlni frecvent șiruri netraduse, dar dacă doriți, puteți să vă implicați în muncă la diff --git a/data/catalogs/bin/desklink/be.catkeys b/data/catalogs/bin/desklink/be.catkeys new file mode 100644 index 0000000000..933b5d8f9b --- /dev/null +++ b/data/catalogs/bin/desklink/be.catkeys @@ -0,0 +1,14 @@ +1 belarusian x-vnd.Haiku-desklink 3053930521 +%g dB MediaReplicant %g дБ +%ld dB VolumeControl %ld дБ +Beep MediaReplicant Біп +Control physical output MediaReplicant Кантраляваць фізічны выхад +Couldn't launch MediaReplicant Немагчыма запусціць +Media preferences… MediaReplicant Наладкі медыя… +No media server running VolumeControl Медыя сервер не запушчаны +OK MediaReplicant ОК +Open MediaPlayer MediaReplicant Запусціць Праігравальнік Медыя +Options MediaReplicant Параметры +Sound preferences… MediaReplicant Наладкі гука… +Volume VolumeControl Узровень +desklink MediaReplicant desklink diff --git a/data/catalogs/bin/desklink/ro.catkeys b/data/catalogs/bin/desklink/ro.catkeys new file mode 100644 index 0000000000..77dbfeca68 --- /dev/null +++ b/data/catalogs/bin/desklink/ro.catkeys @@ -0,0 +1,14 @@ +1 romanian x-vnd.Haiku-desklink 3053930521 +%g dB MediaReplicant %g dB +%ld dB VolumeControl %ld dB +Beep MediaReplicant Bip +Control physical output MediaReplicant Controlează ieșirea fizică +Couldn't launch MediaReplicant Nu s-a putut lansa +Media preferences… MediaReplicant Preferințe media... +No media server running VolumeControl Nu rulează niciun server media +OK MediaReplicant OK +Open MediaPlayer MediaReplicant Deschide PlayerMedia +Options MediaReplicant Opțiuni +Sound preferences… MediaReplicant Preferințe sunet... +Volume VolumeControl Volum +desklink MediaReplicant desklink diff --git a/data/catalogs/bin/desklink/ru.catkeys b/data/catalogs/bin/desklink/ru.catkeys index 0255dd463e..5b4dea3a2d 100644 --- a/data/catalogs/bin/desklink/ru.catkeys +++ b/data/catalogs/bin/desklink/ru.catkeys @@ -9,6 +9,6 @@ No media server running VolumeControl Медиа сервер не запуще OK MediaReplicant ОК Open MediaPlayer MediaReplicant Открыть Медиаплеер Options MediaReplicant Настройки -Sound preferences… MediaReplicant Настройки звука… +Sound preferences… MediaReplicant Настройки звуков… Volume VolumeControl Громкость desklink MediaReplicant desklink diff --git a/data/catalogs/kits/mail/de.catkeys b/data/catalogs/kits/mail/de.catkeys new file mode 100644 index 0000000000..d2b62db4db --- /dev/null +++ b/data/catalogs/kits/mail/de.catkeys @@ -0,0 +1,10 @@ +1 german x-vnd.Haiku-libmail 161731481 +Connection type: ProtocolConfigView Verbindungsart: +Leave mail on server ProtocolConfigView E-Mails auf dem Server belassen +Login type: ProtocolConfigView Anmeldemethode: +Mail server: ProtocolConfigView E-Mail-Server: +Partially download messages larger than ProtocolConfigView Nur Kopfzeilen herunterladen bei E-Mails über +Password: ProtocolConfigView Passwort: +Remove mail from server when deleted ProtocolConfigView Gelöschte E-Mails auch vom Server löschen +Select… MailKit Auswählen… +Username: ProtocolConfigView Benutzername: diff --git a/data/catalogs/kits/mail/fi.catkeys b/data/catalogs/kits/mail/fi.catkeys new file mode 100644 index 0000000000..1225b54aae --- /dev/null +++ b/data/catalogs/kits/mail/fi.catkeys @@ -0,0 +1,10 @@ +1 finnish x-vnd.Haiku-libmail 161731481 +Connection type: ProtocolConfigView Yhteystyyppi: +Leave mail on server ProtocolConfigView Jätä sähköposti palvelimelle +Login type: ProtocolConfigView Kirjautumistyyppi: +Mail server: ProtocolConfigView Sähköpostipalvelin: +Partially download messages larger than ProtocolConfigView Osittain ladatut viestit suurempia kuin +Password: ProtocolConfigView Salasana: +Remove mail from server when deleted ProtocolConfigView Poista sähköposti palvelimelta poistettaessa +Select… MailKit Valitse... +Username: ProtocolConfigView Käyttäjänimi: diff --git a/data/catalogs/kits/mail/ja.catkeys b/data/catalogs/kits/mail/ja.catkeys new file mode 100644 index 0000000000..9c1a2ec1bd --- /dev/null +++ b/data/catalogs/kits/mail/ja.catkeys @@ -0,0 +1,10 @@ +1 japanese x-vnd.Haiku-libmail 161731481 +Connection type: ProtocolConfigView 接続タイプ： +Leave mail on server ProtocolConfigView 受信後もサーバーにメールを保存する +Login type: ProtocolConfigView 認証方法： +Mail server: ProtocolConfigView サーバー名　 +Partially download messages larger than ProtocolConfigView より大きいメッセージは部分ダウンロードする +Password: ProtocolConfigView パスワード： +Remove mail from server when deleted ProtocolConfigView ローカルから削除されたらメールをサーバーから削除 +Select… MailKit 選択… +Username: ProtocolConfigView ユーザーID： diff --git a/data/catalogs/kits/mail/sv.catkeys b/data/catalogs/kits/mail/sv.catkeys new file mode 100644 index 0000000000..17913a14a4 --- /dev/null +++ b/data/catalogs/kits/mail/sv.catkeys @@ -0,0 +1,10 @@ +1 swedish x-vnd.Haiku-libmail 161731481 +Connection type: ProtocolConfigView Anslutningstyp: +Leave mail on server ProtocolConfigView Lämna e-post på servern +Login type: ProtocolConfigView Inloggningstyp: +Mail server: ProtocolConfigView E-postserver: +Partially download messages larger than ProtocolConfigView Ladda ner meddelanden delvis som är större än +Password: ProtocolConfigView Lösenord: +Remove mail from server when deleted ProtocolConfigView Ta bort meddelanden från servern när dom raderas +Select… MailKit Välj... +Username: ProtocolConfigView Användarnamn: diff --git a/data/catalogs/preferences/datatranslations/ro.catkeys b/data/catalogs/preferences/datatranslations/ro.catkeys index af812a634d..98d09b3546 100644 --- a/data/catalogs/preferences/datatranslations/ro.catkeys +++ b/data/catalogs/preferences/datatranslations/ro.catkeys @@ -1,12 +1,18 @@ -1 romanian x-vnd.Haiku-DataTranslations 698538556 +1 romanian x-vnd.Haiku-DataTranslations 3820343452 +An item named '%name' already exists in the Translators folder! Shall the existing translator be overwritten? DataTranslations Un element cu numele „%name” există deja în dosarul Traducători! Se va suprascrie traducătorul existent? Cancel DataTranslations Anulează +Could not install %s:\n%s DataTranslations Nu s-a putut instala %s:\n%s +DataTranslations System name TraduceriDate DataTranslations - Error DataTranslations TraduceriDate - Eroare DataTranslations - Note DataTranslations TraduceriDate - Notă Info DataTranslations info Info: DataTranslations Info: Name: DataTranslations Nume: +Name: %s \nVersion: %ld.%ld.%ld\n\nInfo:\n%s\n\nPath:\n%s\n DataTranslations Nume: %s \nVersiune: %ld.%ld.%ld\n\nDetalii:\n%s\n\nCale:\n%s\n OK DataTranslations OK Overwrite DataTranslations Suprascrie Path: DataTranslations Cale: +The item '%name' does not appear to be a Translator and will not be installed. DataTranslations Elementul „%name” nu pare a fi un Traducător și nu va fi instalat. The new translator has been installed successfully. DataTranslations Traducătorul nou a fost instalat cu succes. +Use this control panel to set default values for translators, to be used when no other settings are specified by an application. DataTranslations Utilizați acest panou de control pentru a configura valorile implicite pentru traducători, pentru a fi utilizate atunci când nu se specifică alte configurări de către o aplicație. Version: DataTranslations Versiune: diff --git a/data/catalogs/preferences/time/be.catkeys b/data/catalogs/preferences/time/be.catkeys index 5af03e3cea..4f1d5643b8 100644 --- a/data/catalogs/preferences/time/be.catkeys +++ b/data/catalogs/preferences/time/be.catkeys @@ -1,16 +1,37 @@ -1 belarusian x-vnd.Haiku-Time 844587475 +1 belarusian x-vnd.Haiku-Time 453699369 Time <іншае> -Clock set to: Time Гадзіннік усталяваны на: +Add Time Дадаць +Could not contact server Time Няма далучэння да сервера +Could not create socket Time Немагчыма стварыць сеткавы сокет. Current time: Time Сапраўдны час: -Date & Time Time Дата і час +Date and time Time Дата і Час +Etc Time І г. д. GMT Time GMT +Hardware clock set to: Time Гадзіннік кампутара усталяваны на: Local time Time Лакальны час +Message receiving failed Time Памылка атрымання паведамлення +Network time Time Сеткавы час OK Time ОК Preview time: Time Праглядзець час: +Received invalid time Time Атрыманы несапраўдны час +Remove Time Выдаліць +Reset Time Скінуць Revert Time Адвярнуць +Sending request failed Time Немагчыма адаслаць запыт. Set time zone Time Пазначыць часавы пояс +Stop Time Спыніць +Synchronize Time Сінхранізаваць +Synchronize again Time Сінхранізаваць ізноў +Synchronize at boot Time Сінхранізаваць падчас старту +The following error occured while synchronizing:r\n%s Time Памылка падчас сінхранізацыі:r\n%s +The following error occured while synchronizing:r\n%s: %s Time Памылка падчас сінхранізацыі:r\n%s: %s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time Гэтая наладка дазваляе наладзіць узаемадзеянне Haiku\nз гадзіннікам кампутара. Калі абраны варыянт "Лакальны час"\nто сістэма лічыць, што гадзіннік кампутара (BIOS Time)\nусталяваны на бягучы час абранага часавога поясу, варыянт-жа\n +"GMT" змусіць сістэму улічваць зрух абранага часавога поясу -\nдадаваць яго да часу гадзінніка кампутара.\nВарыянт "Лакальны час" адпавядае таму які звычайна\nвыкарыстоўваецца аперацыйнай сістэмай Windows. Time System name Дата і Час +Time Time Час Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, аўтары:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Часавы пояс +Try all servers Time Паспрабаваць усе серверы +Waiting for answer failed Time Памылка падчас чакання адказу \nNow: Time \nЗараз: about Time пра праграму diff --git a/data/catalogs/preferences/time/cs.catkeys b/data/catalogs/preferences/time/cs.catkeys index ae9f46c781..076c99361f 100644 --- a/data/catalogs/preferences/time/cs.catkeys +++ b/data/catalogs/preferences/time/cs.catkeys @@ -1,14 +1,13 @@ -1 czech x-vnd.Haiku-Time 3114592611 +1 czech x-vnd.Haiku-Time 2421861288 Time -Clock set to: Time Nastavit hodiny na: Current time: Time Aktuální čas -Date & Time Time Datum a Čas GMT Time GMT Local time Time Místní čas OK Time OK Preview time: Time Náhled času: Revert Time Vrátit změny Set time zone Time Nastavit časové pásmo +Time Time Čas Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, napsali:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Časové pásmo \nNow: Time \nTeď: diff --git a/data/catalogs/preferences/time/de.catkeys b/data/catalogs/preferences/time/de.catkeys index df026f780e..35c6893bbe 100644 --- a/data/catalogs/preferences/time/de.catkeys +++ b/data/catalogs/preferences/time/de.catkeys @@ -1,16 +1,36 @@ -1 german x-vnd.Haiku-Time 844587475 +1 german x-vnd.Haiku-Time 453699369 Time -Clock set to: Time Hardwareuhr gestellt auf: +Add Time Hinzu +Could not contact server Time Server konnte nicht erreicht werden +Could not create socket Time Socket konnte nicht erzeugt werden Current time: Time Aktuelle Zeit: -Date & Time Time Datum & Zeit +Date and time Time Datum und Zeit +Etc Time Etc GMT Time GMT +Hardware clock set to: Time Hardware-Uhr gestellt auf: Local time Time Lokale Zeit +Message receiving failed Time Nachricht wurde nicht erhalten +Network time Time Netzwerkzeit OK Time OK Preview time: Time Vorschau-Zeit: +Received invalid time Time Ungültige Zeit erhalten +Remove Time Entfernen +Reset Time Reset Revert Time Anfangswerte +Sending request failed Time Sendeanfrage fehlgeschlagen Set time zone Time Zeitzone setzen +Stop Time Stopp +Synchronize Time Synchronisieren +Synchronize again Time Nochmal synchronisieren +Synchronize at boot Time Synchronisieren beim Hochfahren +The following error occured while synchronizing:r\n%s Time Beim Synchronisieren trat folgender Fehler auf:r\n%s +The following error occured while synchronizing:r\n%s: %s Time Beim Synchronisieren trat folgender Fehler auf:r\n%s: %s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time Die Darstellung der Uhrzeit in Haiku hängt von der Einstellung\nder Hardware-Uhr ab. Windows benutzt normalerweise \"Lokale Zeit\",\nd.h. die Hardware-Uhr zeigt die gleiche Zeit wie die eingestellte\nZeitzone. Wird dagegen \"GMT\" benutzt, zeigt die Hardware-Uhr\ndiese von Zeitzonen unabhängige Zeit und Haiku muss seine Uhrzeit\nentsprechend nachstellen. Time System name Datum & Zeit +Time Time Time - Datum & Zeit Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Datum & Zeit\n\n\tvon Andrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Zeitzone +Try all servers Time Alle Server abfragen +Waiting for answer failed Time Warten auf Antwort fehlgeschlagen \nNow: Time \nJetzt: about Time über diff --git a/data/catalogs/preferences/time/fr.catkeys b/data/catalogs/preferences/time/fr.catkeys index 26014c561a..8e7a4ebf19 100644 --- a/data/catalogs/preferences/time/fr.catkeys +++ b/data/catalogs/preferences/time/fr.catkeys @@ -1,16 +1,36 @@ -1 french x-vnd.Haiku-Time 844587475 +1 french x-vnd.Haiku-Time 453699369 Time -Clock set to: Time Heure réglée sur : +Add Time Ajouter +Could not contact server Time Impossible de contacter le serveur +Could not create socket Time Impossible de créer le socket Current time: Time Heure actuelle : -Date & Time Time Date & Heure +Date and time Time Date et heure +Etc Time Etc GMT Time GMT +Hardware clock set to: Time L'horloge matérielle est réglée sur : Local time Time Heure locale +Message receiving failed Time La réception du message a échoué +Network time Time Heure réseau OK Time OK Preview time: Time Aperçu de l'heure : +Received invalid time Time Une heure non valide a été reçue +Remove Time Retirer +Reset Time Réinitialiser Revert Time Rétablir +Sending request failed Time L'envoi d'une requête a échoué Set time zone Time Régler le fuseau horaire +Stop Time Arrêter +Synchronize Time Synchroniser +Synchronize again Time Synchroniser à nouveau +Synchronize at boot Time Synchroniser au démarrage +The following error occured while synchronizing:r\n%s Time L'erreur suivante est survenue lors de la synchronisation :\n%s +The following error occured while synchronizing:r\n%s: %s Time L'erreur suivante est survenue lors de la synchronisation :\n%s : %s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time Ce paramètre contrôle la façon dont Haiku affiche l'heure en fonction\nde la façon dont elle est gérée dans l'horloge matérielle de l'ordinateur.\nWindows est généralement réglé sur l'heure locale, ce qui signifie que\nl'horloge matérielle est réglée dans le fuseau horaire configuré. Lorsque\ncette option est réglée en GMT, cela signifie que l'horloge matérielle est\nréglée sur le fuseau horaire de Greenwich et Haiku ajuste l'affichage de\nl'heure en tenant compte du fuseau horaire configuré. Time System name Heure +Time Time Heure Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Date & Heure, écrit par :\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Fuseau horaire +Try all servers Time Essayer tous les serveurs +Waiting for answer failed Time L'attente d'une réponse a échoué \nNow: Time \nMaintenant, il est : about Time À propos diff --git a/data/catalogs/preferences/time/it.catkeys b/data/catalogs/preferences/time/it.catkeys index 223b247b4b..091509f2a1 100644 --- a/data/catalogs/preferences/time/it.catkeys +++ b/data/catalogs/preferences/time/it.catkeys @@ -1,14 +1,14 @@ -1 italian x-vnd.Haiku-Time 3114592611 +1 italian x-vnd.Haiku-Time 2610033694 Time -Clock set to: Time Orologio impostato a Current time: Time Ora attuale: -Date & Time Time Data e Ora +Etc Time Ecc GMT Time GMT Local time Time Ora locale OK Time OK Preview time: Time Durata dell'anteprima: Revert Time Ripristina Set time zone Time Imposta fuso orario +Time Time Ora Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, scritto da:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Fuso orario \nNow: Time \nOra: diff --git a/data/catalogs/preferences/time/ja.catkeys b/data/catalogs/preferences/time/ja.catkeys index 708836b84f..69efb28376 100644 --- a/data/catalogs/preferences/time/ja.catkeys +++ b/data/catalogs/preferences/time/ja.catkeys @@ -1,16 +1,36 @@ -1 japanese x-vnd.Haiku-Time 844587475 +1 japanese x-vnd.Haiku-Time 453699369 Time <その他> -Clock set to: Time 時刻の設定： +Add Time 追加 +Could not contact server Time サーバーに接続できませんでした。 +Could not create socket Time ソケットを作成できませんでした。 Current time: Time 現在時刻： -Date & Time Time 日付と時間 +Date and time Time 日付と時間 +Etc Time Etc GMT Time グリニッジ標準時 +Hardware clock set to: Time ハードウェアクロックを設定: Local time Time 現地時間 +Message receiving failed Time メッセージの取得に失敗しました +Network time Time ネットワークタイム OK Time OK Preview time: Time プレビュー： +Received invalid time Time 不正な時間を受け取りました +Remove Time 削除 +Reset Time リセット Revert Time 元に戻す +Sending request failed Time リクエストの送信に失敗しました Set time zone Time タイムゾーンを設定 +Stop Time 中断 +Synchronize Time 同期 +Synchronize again Time 再同期 +Synchronize at boot Time システム起動時に同期する +The following error occured while synchronizing:r\n%s Time 同期中に次のエラーが発生しました:\n%s +The following error occured while synchronizing:r\n%s: %s Time 同期中に次のエラーが発生しました\n%s: %s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time この設定は、時間がコンピューターのハードウェアクロックで計られる方法\nに基づいて、Haikuがどのように時刻を表示するかをコントロールします。\nWIndowsは常にローカルタイムに設定します。つまり、設定された\nタイムゾーンと同様にハードウェアクロックが測定される事を意味します。\nGMTに設定された場合は、ハードウェアクロックはGMTベースで測定\nされ、Haikuは設定されたタイムゾーンに基づいて、表示する時間を調整\nするでしょう。 Time System name 日付と時間 +Time Time 日付と時間 Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date 作者:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time タイムゾーン +Try all servers Time すべてのサーバーを試す +Waiting for answer failed Time 返答待ちに失敗しました \nNow: Time \n現在： about Time このソフトウェアについて diff --git a/data/catalogs/preferences/time/nb.catkeys b/data/catalogs/preferences/time/nb.catkeys index 1da022c0ad..7d755fd0fd 100644 --- a/data/catalogs/preferences/time/nb.catkeys +++ b/data/catalogs/preferences/time/nb.catkeys @@ -1,13 +1,13 @@ -1 norwegian_bokmål x-vnd.Haiku-Time 3140618062 +1 norwegian_bokmål x-vnd.Haiku-Time 4271151042 Time Current time: Time Tid nå: -Date & Time Time Dato & Tid Local time Time Lokal tid OK Time OK Preview time: Time Forhåndsvis tid: Revert Time Tilbakestill Set time zone Time Sett tidssone Time System name Tid +Time Time Tid Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date skrevet av:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nOpphavsrett 2004-2008 Haiku. Time zone Time Tidssone \nNow: Time \nNå: diff --git a/data/catalogs/preferences/time/nl.catkeys b/data/catalogs/preferences/time/nl.catkeys index 229cd1f4d6..045650f947 100644 --- a/data/catalogs/preferences/time/nl.catkeys +++ b/data/catalogs/preferences/time/nl.catkeys @@ -1,10 +1,11 @@ -1 dutch x-vnd.Haiku-Time 1185381160 +1 dutch x-vnd.Haiku-Time 2504086546 Time Current time: Time Huidige tijd: -Date & Time Time Datum & Tijd +Etc Time Etc. OK Time Oké Preview time: Time Voorvertoning tijd: Set time zone Time Tijdzone instellen +Time Time Tijd Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, door:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Tijdzone \nNow: Time \nNu: diff --git a/data/catalogs/preferences/time/pl.catkeys b/data/catalogs/preferences/time/pl.catkeys index 500d9c3bc3..8ac8b25ee0 100644 --- a/data/catalogs/preferences/time/pl.catkeys +++ b/data/catalogs/preferences/time/pl.catkeys @@ -1,10 +1,11 @@ -1 polish x-vnd.Haiku-Time 1185381160 +1 polish x-vnd.Haiku-Time 2504086546 Time Current time: Time Aktualny czas: -Date & Time Time Data & Czas +Etc Time Etc OK Time OK Preview time: Time Czas podglądu: Set time zone Time Ustaw strefę czasową +Time Time Czas Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, autorstwa:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Strefa czasowa \nNow: Time \nTeraz: diff --git a/data/catalogs/preferences/time/ro.catkeys b/data/catalogs/preferences/time/ro.catkeys index 2a0688cd3d..b4fa4dbc3f 100644 --- a/data/catalogs/preferences/time/ro.catkeys +++ b/data/catalogs/preferences/time/ro.catkeys @@ -1,10 +1,11 @@ -1 romanian x-vnd.Haiku-Time 1134515575 +1 romanian x-vnd.Haiku-Time 2453220961 Time Current time: Time Oră curentă: -Date & Time Time Dată & oră +Etc Time Etc OK Time OK Preview time: Time Previzualizare oră: Revert Time Inversează Set time zone Time Configurează fusul orar +Time Time Oră Time zone Time Fus orar about Time despre diff --git a/data/catalogs/preferences/time/ru.catkeys b/data/catalogs/preferences/time/ru.catkeys index 48029d3c7d..f62e44f605 100644 --- a/data/catalogs/preferences/time/ru.catkeys +++ b/data/catalogs/preferences/time/ru.catkeys @@ -1,16 +1,32 @@ -1 russian x-vnd.Haiku-Time 844587475 +1 russian x-vnd.Haiku-Time 2002728485 Time <Другой> -Clock set to: Time Часы настроены на: +Add Time Добавить +Could not contact server Time Ну удалось связаться с сервером +Could not create socket Time Не удалось создать сокет Current time: Time Текущее время: -Date & Time Time Дата и время +Date and time Time Дата и время +Etc Time И т.д. GMT Time GMT Local time Time Местное время +Network time Time Синхронизация времени OK Time ОК Preview time: Time Предварительное время: +Received invalid time Time Получено неверное время +Remove Time Удалить +Reset Time Сбросить Revert Time Вернуть +Sending request failed Time Не удалось отправить запрос Set time zone Time Установить часовой пояс +Stop Time Остановить +Synchronize Time Синхронизировать +Synchronize again Time Синхронизировать снова +Synchronize at boot Time Синхронизировать при загрузке +The following error occured while synchronizing:r\n%s Time При синхронизации произошла следующая ошибка:r\n%s +The following error occured while synchronizing:r\n%s: %s Time При синхронизации произошла следующая ошибка:r\n%s: %s Time System name Время +Time Time Время Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, разработал:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Часовой пояс +Try all servers Time Пробовать все сервера \nNow: Time \nСейчас: about Time о программе diff --git a/data/catalogs/preferences/time/sk.catkeys b/data/catalogs/preferences/time/sk.catkeys index 2bfd3e718c..f17773ed91 100644 --- a/data/catalogs/preferences/time/sk.catkeys +++ b/data/catalogs/preferences/time/sk.catkeys @@ -1,14 +1,13 @@ -1 slovak x-vnd.Haiku-Time 3114592611 +1 slovak x-vnd.Haiku-Time 2421861288 Time -Clock set to: Time Hodiny nastavené na: Current time: Time Aktuálny čas: -Date & Time Time Dátum a čas GMT Time GMT Local time Time Lokálny čas OK Time OK Preview time: Time Náhľad času: Revert Time Vrátiť Set time zone Time Nastaviť časové pásmo +Time Time Čas Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Dátum a čas, napísali:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Časové pásmo \nNow: Time \nTeraz: diff --git a/data/catalogs/preferences/time/sv.catkeys b/data/catalogs/preferences/time/sv.catkeys index ffeea47880..d310e6f075 100644 --- a/data/catalogs/preferences/time/sv.catkeys +++ b/data/catalogs/preferences/time/sv.catkeys @@ -1,16 +1,36 @@ -1 swedish x-vnd.Haiku-Time 844587475 +1 swedish x-vnd.Haiku-Time 453699369 Time -Clock set to: Time Klockan ställd på: +Add Time Lägg till +Could not contact server Time Kunde inte kontakta servern +Could not create socket Time Kunde inte skapa en socket Current time: Time Aktuell tid: -Date & Time Time Datum och tid +Date and time Time Datum och tid +Etc Time Etc GMT Time GMT standardtid +Hardware clock set to: Time Hårdvaruklockans tid: Local time Time Lokal tid +Message receiving failed Time Kunde inte ta emot meddelandet +Network time Time Internettid OK Time OK Preview time: Time Förhandsvisa tid: +Received invalid time Time Tog emot en ogiltig tid +Remove Time Ta bort +Reset Time Återställ Revert Time Återställ +Sending request failed Time Misslyckades att skicka förfrågan Set time zone Time Ange tidzon +Stop Time Stoppa +Synchronize Time Synkronisera +Synchronize again Time Synkronisera igen +Synchronize at boot Time Synkronisera vid uppstart +The following error occured while synchronizing:r\n%s Time Följande fel uppstod vid synkronisering:r\n%s +The following error occured while synchronizing:r\n%s: %s Time Följande fel uppstod vid synkronisering:r\n%s: %s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time Denna inställning kontrollerar hur Haiku visar sin tid baserat på hur\ntiden är sparad i datorns hårdvaruklocka. Windows är normalt inställd\npå lokal tid, vilket betyder att hårdvaruklockan använder samma tid\nsom den inställda tidzonen. När denna är inställd på GMT betyder\ndet att hårdvaruklockan också sparar sin tid som GMT. Haiku kommer\ndärmed att justera tiden den visar baserad på den inställda tidzonen. Time System name Tid +Time Time Tid Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Datum & Tid, skrivet av:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time zone Time Tidzon +Try all servers Time Prova alla servrarna +Waiting for answer failed Time Fick inget svar \nNow: Time \nNu: about Time om diff --git a/data/catalogs/preferences/time/uk.catkeys b/data/catalogs/preferences/time/uk.catkeys index 32e0dc1193..9fb370c726 100644 --- a/data/catalogs/preferences/time/uk.catkeys +++ b/data/catalogs/preferences/time/uk.catkeys @@ -1,11 +1,12 @@ -1 ukrainian x-vnd.Haiku-Time 2768324476 +1 ukrainian x-vnd.Haiku-Time 4087029862 Time <Інше> Current time: Time Поточний час: -Date & Time Time Дата і Час +Etc Time І т.д. OK Time Гаразд Preview time: Time Попередній час: Revert Time Повернути Set time zone Time Встановити часову зону +Time Time Час Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time Time & Date, Написаний:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nАвторські права 2004-2008, Haiku. Time zone Time Часова зона about Time про diff --git a/data/catalogs/preferences/time/zh_hans.catkeys b/data/catalogs/preferences/time/zh_hans.catkeys index f4ced70d91..c62e58f621 100644 --- a/data/catalogs/preferences/time/zh_hans.catkeys +++ b/data/catalogs/preferences/time/zh_hans.catkeys @@ -1,15 +1,36 @@ -1 simplified_chinese x-vnd.Haiku-Time 3114592611 +1 simplified_chinese x-vnd.Haiku-Time 453699369 Time <其他> -Clock set to: Time 时钟设置为： +Add Time 添加 +Could not contact server Time 无法连接服务器 +Could not create socket Time 无法创建套接字 Current time: Time 当前时间： -Date & Time Time 日期和时间 +Date and time Time 日期时间 +Etc Time 等等 GMT Time GMT +Hardware clock set to: Time 硬件时钟设置为： Local time Time 当地时间 +Message receiving failed Time 消息接收失败 +Network time Time 网络时间 OK Time 确定 Preview time: Time 时间预览： +Received invalid time Time 接收时间无效 +Remove Time 移除 +Reset Time 重置 Revert Time 恢复 +Sending request failed Time 发送请求失败 Set time zone Time 设置时区 -Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time 日期和时间，编写者：\n\n\tAndrew Edward McCall \n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\n版权所有 2004-2008, Haiku, Inc. +Stop Time 停止 +Synchronize Time 同步 +Synchronize again Time 再次同步 +Synchronize at boot Time 启动时同步 +The following error occured while synchronizing:r\n%s Time 时间同步时发生如下错误：r\n%s +The following error occured while synchronizing:r\n%s: %s Time 同步时间时发生如下错误：r\n%s：%s +This setting controls how Haiku will display your time based on how\ntime is measured in the computer's hardware clock. Windows is usually\nset to local time, meaning the hardware clock is measured in the same\ntime as the configured time zone. When this is set to GMT it means the\nhardware clock is measured based on GMT and Haiku will adjust the time\nit shows based on the configured time zone. Time 该设置控制了 Haiku 基于硬件时钟显示时间的方式。窗口通常设置为本地时间，\n即硬件时钟的时间与配置的时区时间相同。当设置为 GMT 时，硬件\n时钟基于 GMT 进行计时，Haiku 将会根据时区调整显示时间。 +Time System name 时间 +Time Time 时间 +Time & Date, writen by:\n\n\tAndrew Edward McCall\n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\nCopyright 2004-2008, Haiku. Time 日期时间，编写者：\n\n\tAndrew Edward McCall \n\tMike Berg\n\tJulun\n\tPhilippe Saint-Pierre\n\n版权 2004-2008, Haiku, Inc. Time zone Time 时区 +Try all servers Time 尝试所有服务器 +Waiting for answer failed Time 等待回复失败 \nNow: Time \n现在时间： about Time 关于 diff --git a/data/catalogs/servers/mail/de.catkeys b/data/catalogs/servers/mail/de.catkeys new file mode 100644 index 0000000000..59ade58336 --- /dev/null +++ b/data/catalogs/servers/mail/de.catkeys @@ -0,0 +1,20 @@ +1 german x-vnd.Haiku-mail_daemon 3018783227 +%num new message for %name\n MailDaemon %num neue Nachricht für %name\n +%num new messages for %name\n MailDaemon %num neue Nachrichten für %name\n + DeskbarView +Check for mail now DeskbarView E-Mails jetzt abrufen +Check for mails only DeskbarView E-Mails nur abrufen +Check mail now StatusWindow E-Mails jetzt abrufen +Create new message… DeskbarView Nachricht verfassen… +New Messages MailDaemon Neue Nachrichten +No new messages DeskbarView Keine neuen Nachrichten +No new messages MailDaemon Keine neuen Nachrichten +No new messages. MailDaemon Keine neuen Nachrichten. +No new messages. StatusWindow Keine neuen Nachrichten. +Preferences… DeskbarView Einstellungen… +Send pending mails DeskbarView E-Mails senden +Shutdown mail services DeskbarView E-Mail-Dienst ausschalten +new message DeskbarView neue Nachricht +new message. MailDaemon neue Nachricht. +new messages DeskbarView neue Nachrichten +new messages. MailDaemon neue Nachrichten. diff --git a/data/catalogs/servers/mail/fi.catkeys b/data/catalogs/servers/mail/fi.catkeys new file mode 100644 index 0000000000..4bdeff91b8 --- /dev/null +++ b/data/catalogs/servers/mail/fi.catkeys @@ -0,0 +1,20 @@ +1 finnish x-vnd.Haiku-mail_daemon 3018783227 +%num new message for %name\n MailDaemon %num uusi viesti käyttäjälle %name\n +%num new messages for %name\n MailDaemon %num uutta viestiä käyttäjälle %name\n + DeskbarView +Check for mail now DeskbarView Tarkista sähköposti nyt +Check for mails only DeskbarView Tarkista vain sähköpostit +Check mail now StatusWindow Tarkista sähköposti nyt +Create new message… DeskbarView Luo uusi viesti... +New Messages MailDaemon Uudet viestit +No new messages DeskbarView Ei uusia viestejä +No new messages MailDaemon Ei uusia viestejä +No new messages. MailDaemon Ei uusia viestejä. +No new messages. StatusWindow Ei uusia viestejä. +Preferences… DeskbarView Asetukset... +Send pending mails DeskbarView Lähetä odottamassa olevat sähköpostiviestit +Shutdown mail services DeskbarView Sulje sähköpostipalvelut +new message DeskbarView uusi viesti +new message. MailDaemon uusi viesti. +new messages DeskbarView uudet viestit +new messages. MailDaemon uusia viestejä. diff --git a/data/catalogs/servers/mail/ja.catkeys b/data/catalogs/servers/mail/ja.catkeys new file mode 100644 index 0000000000..c9df28dc9c --- /dev/null +++ b/data/catalogs/servers/mail/ja.catkeys @@ -0,0 +1,20 @@ +1 japanese x-vnd.Haiku-mail_daemon 3018783227 +%num new message for %name\n MailDaemon %name より %num 通のメッセージが届きました\n +%num new messages for %name\n MailDaemon %name より %num 通のメッセージが届きました\n + DeskbarView <アカウント無し> +Check for mail now DeskbarView 今すぐメールをチェック +Check for mails only DeskbarView メール受信のみ +Check mail now StatusWindow 今すぐメールをチェック +Create new message… DeskbarView 新規メッセージ作成 +New Messages MailDaemon 通の新着メッセージがあります。 +No new messages DeskbarView 新着メッセージはありません。 +No new messages MailDaemon 未読メッセージはありません。 +No new messages. MailDaemon 新着メッセージはありません。 +No new messages. StatusWindow 新着メッセージはありません。 +Preferences… DeskbarView メールの設定 +Send pending mails DeskbarView 保留メールを送信 +Shutdown mail services DeskbarView 終了 +new message DeskbarView 通の新着メッセージがあります。 +new message. MailDaemon 通の新着メッセージがあります。 +new messages DeskbarView 通の未読メッセージがあります。 +new messages. MailDaemon 通の新着メッセージがあります。 diff --git a/data/catalogs/servers/mail/sv.catkeys b/data/catalogs/servers/mail/sv.catkeys new file mode 100644 index 0000000000..0e52618f31 --- /dev/null +++ b/data/catalogs/servers/mail/sv.catkeys @@ -0,0 +1,18 @@ +1 swedish x-vnd.Haiku-mail_daemon 1380020630 + DeskbarView +Check for mail now DeskbarView Kontrollera e-post nu +Check for mails only DeskbarView Kontrollera bara e-post +Check mail now StatusWindow Kontrollera e-post nu +Create new message… DeskbarView Skapa nytt meddelande... +New Messages MailDaemon nya meddelanden +No new messages DeskbarView inga nya meddelanden +No new messages MailDaemon Inga nya meddelanden +No new messages. MailDaemon Inga nya meddelanden. +No new messages. StatusWindow Inga nya meddelanden. +Preferences… DeskbarView Inställningar... +Send pending mails DeskbarView Skicka väntande meddelanden +Shutdown mail services DeskbarView Stäng av e-posttjänsterna +new message DeskbarView nytt meddelande +new message. MailDaemon nytt meddelande. +new messages DeskbarView nya meddelanden +new messages. MailDaemon nya meddelanden. diff --git a/data/catalogs/servers/registrar/ru.catkeys b/data/catalogs/servers/registrar/ru.catkeys index 637e445a8f..ecd2100b24 100644 --- a/data/catalogs/servers/registrar/ru.catkeys +++ b/data/catalogs/servers/registrar/ru.catkeys @@ -19,5 +19,5 @@ Shutdown aborted ShutdownProcess Выключение прервано Shutdown status ShutdownProcess Статус выключения Shutting down… ShutdownProcess Выключение… System is shut down ShutdownProcess Система выключена -The application \"%appName%\" might be blocked on a modal panel. ShutdownProcess Приложение \"%appName%\" возможно заблокировано модальным окном. +The application \"%appName%\" might be blocked on a modal panel. ShutdownProcess Приложение \"%appName%\" возможно заблокировано модальным окном или не отвечает. Tidying things up a bit. ShutdownProcess Подготовка системы к выключению.