diff --git a/src/add-ons/accelerants/neomagic/Cursor.c b/src/add-ons/accelerants/neomagic/Cursor.c
index 40343cb741..26aa79c2ff 100644
--- a/src/add-ons/accelerants/neomagic/Cursor.c
+++ b/src/add-ons/accelerants/neomagic/Cursor.c
@@ -3,7 +3,7 @@
 	This file may be used under the terms of the Be Sample Code License.
 
 	Other authors:
-	Rudolf Cornelissen 4/2003-6/2003
+	Rudolf Cornelissen 4/2003-5/2004
 */
 
 #define MODULE_BIT 0x20000000
@@ -54,21 +54,9 @@ void MOVE_CURSOR(uint16 x, uint16 y)
 	si->cursor.x = x;
 	si->cursor.y = y;
 
-	switch(si->dm.space)
-	{
-	case B_CMAP8:
-		h_adjust = 0x03;
-		break;
-	case B_RGB15_LITTLE:case B_RGB16_LITTLE:
-		h_adjust = 0x01;
-		break;
-	case B_RGB32_LITTLE:
-		h_adjust = 0x00;
-		break;
-	default:
-		h_adjust = 0x03;
-		break;
-	}
+	/* setting up minimum amount to scroll not needed:
+	 * Neomagic cards can always do pixelprecise panning */
+	h_adjust = 0x00;
 
 	/* if internal panel is active correct visible screensize! */
 	if (nm_general_output_read() & 0x02)
diff --git a/src/add-ons/accelerants/neomagic/SetDisplayMode.c b/src/add-ons/accelerants/neomagic/SetDisplayMode.c
index 8887add929..416a1c4c9b 100644
--- a/src/add-ons/accelerants/neomagic/SetDisplayMode.c
+++ b/src/add-ons/accelerants/neomagic/SetDisplayMode.c
@@ -170,20 +170,21 @@ status_t MOVE_DISPLAY(uint16 h_display_start, uint16 v_display_start)
 
 	LOG(4,("MOVE_DISPLAY: h %d, v %d\n", h_display_start, v_display_start));
 
-	/* reset lower bits, don't return an error! */
+	/* Neomagic cards support pixelprecise panning in all modes:
+	 * No stepping granularity needed! */
+
+	/* determine bits used for the colordepth */
 	switch(si->dm.space)
 	{
 	case B_CMAP8:
 		colour_depth=8;
-		h_display_start &= ~0x03;
 		break;
-	case B_RGB15_LITTLE: case B_RGB16_LITTLE:
+	case B_RGB15_LITTLE:
+	case B_RGB16_LITTLE:
 		colour_depth=16;
-		h_display_start &= ~0x01;
 		break;
 	case B_RGB24_LITTLE:
 		colour_depth=24;
-		h_display_start &= ~0x03;
 		break;
 	default:
 		return B_ERROR;
diff --git a/src/add-ons/accelerants/neomagic/engine/nm_crtc.c b/src/add-ons/accelerants/neomagic/engine/nm_crtc.c
index e40dfd2d79..da2e9df318 100644
--- a/src/add-ons/accelerants/neomagic/engine/nm_crtc.c
+++ b/src/add-ons/accelerants/neomagic/engine/nm_crtc.c
@@ -481,12 +481,10 @@ status_t nm_crtc_set_display_start(uint32 startadd,uint8 bpp)
 		timeout++;
 	}
 
-	/* the neomagic framebuffer startadress is given in 32bit words */
-	startadd >>= 2;
-
 	/* set standard VGA registers */
-    ISACRTCW(FBSTADDH, ((startadd & 0x00FF00) >> 8));
-    ISACRTCW(FBSTADDL, (startadd & 0x0000FF));
+	/* (startadress in 32bit words (b2 - b17) */
+    ISACRTCW(FBSTADDH, ((startadd & 0x03fc00) >> 10));
+    ISACRTCW(FBSTADDL, ((startadd & 0x0003fc) >> 2));
 
 	/* set NM extended register */
 	//fixme: NM2380 _must_ have one more bit (has >4Mb RAM)!!
@@ -496,9 +494,27 @@ status_t nm_crtc_set_display_start(uint32 startadd,uint8 bpp)
 	/* we need to wait a bit or the card will mess-up it's register values.. (NM2160) */
 	snooze(10);
 	if (si->ps.card_type < NM2200)
-		ISAGRPHW(FBSTADDE,(((startadd >> 16) & 0x07) | (val & 0xf8)));
+		/* extended bits: (b18-20) */
+		ISAGRPHW(FBSTADDE,(((startadd >> 18) & 0x07) | (val & 0xf8)));
 	else
-		ISAGRPHW(FBSTADDE,(((startadd >> 16) & 0x0f) | (val & 0xf0)));
+		/* extended bits: (b18-21) */
+		ISAGRPHW(FBSTADDE,(((startadd >> 18) & 0x0f) | (val & 0xf0)));
+
+	/* set byte adress: (b0 - 1):
+	 * Neomagic cards work with _pixel_ offset here. */
+	switch(bpp)
+	{
+	case 8:
+		ISAATBW(HORPIXPAN, (startadd & 0x00000003));
+		break;
+	case 15:
+	case 16:
+		ISAATBW(HORPIXPAN, ((startadd & 0x00000002) >> 1));
+		break;
+	case 24:
+		ISAATBW(HORPIXPAN, ((4 - (startadd & 0x00000003)) & 0x03));
+		break;
+	}
 
 	return B_OK;
 }
diff --git a/src/add-ons/accelerants/neomagic/engine/nm_general.c b/src/add-ons/accelerants/neomagic/engine/nm_general.c
index 8b681de4b7..2f9e02e382 100644
--- a/src/add-ons/accelerants/neomagic/engine/nm_general.c
+++ b/src/add-ons/accelerants/neomagic/engine/nm_general.c
@@ -47,7 +47,7 @@ status_t nm_general_powerup()
 {
 	status_t status;
 
-	LOG(1,("POWERUP: Neomagic (open)BeOS Accelerant 0.06-14 running.\n"));
+	LOG(1,("POWERUP: Neomagic (open)BeOS Accelerant 0.06-15 running.\n"));
 
 	/* detect card type and power it up */
 	switch(CFGR(DEVID))