* style cleanup

* whitespace cleanup
* no functional change

src/add-ons/kernel/drivers/network/wwan/usb_beceemwmx/BeceemDevice.h

@@ -12,8 +12,6 @@
  *		ASIX AX88172/AX88772/AX88178 USB 2.0 Ethernet Driver
  *			(c) 2008 by S.Zharski, <[email protected]>
  */
-
-
 #ifndef _USB_BECEEM_DEVICE_H_
 #define _USB_BECEEM_DEVICE_H_
 

src/add-ons/kernel/drivers/network/wwan/usb_beceemwmx/DeviceStruct.h

@@ -5,12 +5,13 @@
  *
  *	Based on GPL code developed by: Beceem Communications Pvt. Ltd
  */
-
 #ifndef _USB_BECEEM_DEVICE_STRUCT_
 #define _USB_BECEEM_DEVICE_STRUCT_
 
+
 #include "Driver.h"
 
+
 typedef struct FirmwareInfo
 {
 	void*			pvMappedFirmwareAddress;
@@ -154,27 +155,30 @@ typedef struct _VENDORCFG
 	/*
 	ARQ Enable ==> 0xddccbbaa
 		aa => 0x01 Enables ARQ
-		bb => 0x01 Disables the ARQ feature where MS combines ARQ FB and tranport
+		bb => 0x01 Disable the ARQ feature where MS combines ARQ FB and tranport
 		CID Bw Requests:
 		cc => 0x01 Enable ARQ FB BW req enh
 		dd => 0th bit Disable ARQ Cut thru for Ack Generation
-		dd => 1st bit enables handling of partial nacking of PDUs, and retxing */
+		dd => 1st bit enable handling of partial nacking of PDUs, and retxing */
 	uint32	m_u32ArqEnable;
 
 	/*
 	HARQ Enable ==> 0xddccbbaa
-		aa => 0x01 Enables HARQ on Transport;
+		aa =>	0x01 Enable HARQ on Transport;
-		bb => 0 bit Enables HARQ on Management
+		bb =>	0 bit Enable HARQ on Management
-		bb => 1 bit Enables Out of order delivery on non-ARQ Rx ERTPS HARQ connections
+		bb =>	1 bit Enable Out of order delivery on non-ARQ Rx ERTPS
-		bb => 2 bit Enables Out of order delivery on all non-ARQ RX HARQ connections
+				HARQ connections
-		dd => If set, used as the PDU purge timer on the non-ARQ Rx HARQ RT connections
+		bb =>	2 bit Enable Out of order delivery on all non-ARQ RX
-		ERTPS, RTPS, UGS
+				HARQ connections
-		HARQ on Management only is NOT Permitted.
+		dd =>	If set, used as the PDU purge timer on the non-ARQ Rx
-		Eg. 0x0101 => Enables HARQ on Management and HARQ on Transport Connections
+				HARQ RT connections ERTPS, RTPS, UGS and HARQ on Management
-		Eg. 0x0301 => Enables HARQ on Management and HARQ on Transport Connections
+				only is NOT Permitted.
-					  Enables out of deliver on the non-ARQ rx ERTPS HARQ connections
+		Examples:
-		Eg. 0x0501 => Enables HARQ on Management and HARQ on Transport Connections
+		0x0101 	Enable HARQ on Management and HARQ on Transport Connections
-					  Enables out of deliver on the non-ARQ RX HARQ connections */
+		0x0301 	Enable HARQ on Management and HARQ on Transport Connections
+				Enable out of deliver on the non-ARQ rx ERTPS HARQ connections
+		0x0501	Enable HARQ on Management and HARQ on Transport Connections
+				Enable out of deliver on the non-ARQ RX HARQ connections */
 	uint32	m_u32HarqEnable;
 
 	// EEPROM Param Location
@@ -230,7 +234,7 @@ typedef struct _VENDORCFG
 
 	/*
 	PhyParameter2
-		[16]	Set to 1 for accurate CINR measurement on noise limited scenarios
+		[16]	Set 1 for accurate CINR measurement on noise limited scenarios
 				If set to 1, note the BTS Link Adaptation tables may need change
 		[15:8]	Backoff in 0.25dBm steps in Transmit power to be
 				applied for an uncalibrated unit */
@@ -513,5 +517,5 @@ volatile	bool				nvmFlashRaw;
 				// GPIO LED bitmap
 };
 
-#endif // _USB_BECEEM_DEVICE_STRUCT_
 
+#endif // _USB_BECEEM_DEVICE_STRUCT_

src/add-ons/kernel/drivers/network/wwan/usb_beceemwmx/Driver.h

@@ -98,6 +98,7 @@
 #define STATE_IDLEEXIT	0x80	// IDLEMODE_EXIT
 #define STATE_HALT		0x00	// SHUTDOWN_EXIT
 
+
 const uint8 kInvalidRequest = 0xff;
 
 // version of bcm driver this was based upon + end .1

src/add-ons/kernel/drivers/network/wwan/usb_beceemwmx/util.cpp

@@ -5,34 +5,35 @@
  *
  */
 
-#include <ByteOrder.h>
 
+#include <ByteOrder.h>
 #include "util.h"
 
+
 void
 convertEndian(bool write, uint32 uiByteCount, uint32* buffer)
 {
 	uint32 uiIndex = 0;
 
-	if( write == true ) {
+	if (write == true) {
-		for(uiIndex = 0; uiIndex < (uiByteCount/sizeof(uint32)); uiIndex++) {
+		for (uiIndex = 0; uiIndex < (uiByteCount / sizeof(uint32)); uiIndex++) {
 			buffer[uiIndex] = htonl(buffer[uiIndex]);
 		}
 	} else {
-		for(uiIndex = 0; uiIndex < (uiByteCount/sizeof(uint32)); uiIndex++) {
+		for (uiIndex = 0; uiIndex < (uiByteCount / sizeof(uint32)); uiIndex++) {
 			buffer[uiIndex] = ntohl(buffer[uiIndex]);
 		}
 	}
 }
 
+
 uint16_t
 CalculateHWChecksum(uint8_t* pu8Buffer, uint32 u32Size)
 {
-	uint16_t u16CheckSum=0;
+	uint16_t u16CheckSum = 0;
-	while(u32Size--) {
+	while (u32Size--) {
 		u16CheckSum += (uint8_t)~(*pu8Buffer);
 		pu8Buffer++;
 	}
 	return u16CheckSum;
 }
-

src/add-ons/kernel/drivers/network/wwan/usb_beceemwmx/util.h

@@ -5,8 +5,9 @@
  *
  */
 
+
 #include "Driver.h"
 
+
 void convertEndian(bool write, uint32 uiByteCount, uint32* buffer);
 uint16_t CalculateHWChecksum(uint8_t* pu8Buffer, uint32 u32Size);
-