we don't report stats for now, as some init is missing for ratectl, this should avoid KDL for these drivers.

git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@41251 a95241bf-73f2-0310-859d-f6bbb57e9c96

src/add-ons/kernel/drivers/network/wlan/broadcom43xx/dev/bwi/if_bwi.c

@@ -2982,7 +2982,9 @@ bwi_encap(struct bwi_softc *sc, int idx, struct mbuf *m,
 	} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
 		rate = rate_fb = tp->ucastrate;
 	} else {
+#ifndef __HAIKU__
 		rix = ieee80211_ratectl_rate(ni, NULL, pkt_len);
+#endif
 		rate = ni->ni_txrate;
 
 		if (rix > 0) {
@@ -3378,9 +3380,11 @@ _bwi_txeof(struct bwi_softc *sc, uint16_t tx_id, int acked, int data_txcnt)
 			 * well so to avoid over-aggressive downshifting we
 			 * treat any number of retries as "1".
 			 */
+#ifndef __HAIKU__
 			ieee80211_ratectl_tx_complete(vap, ni,
 			    (data_txcnt > 1) ? IEEE80211_RATECTL_TX_SUCCESS :
 			        IEEE80211_RATECTL_TX_FAILURE, &acked, NULL);
+#endif
 		}
 
 		/*

src/add-ons/kernel/drivers/network/wlan/iprowifi3945/dev/wpi/if_wpi.c

@@ -1600,8 +1600,10 @@ wpi_tx_intr(struct wpi_softc *sc, struct wpi_rx_desc *desc)
 		DPRINTFN(WPI_DEBUG_TX, ("%d retries\n", stat->ntries));
 		retrycnt = 1;
 	}
+#ifndef __HAIKU__
 	ieee80211_ratectl_tx_complete(vap, ni, IEEE80211_RATECTL_TX_SUCCESS,
 	    &retrycnt, NULL);
+#endif
 
 	/* XXX oerrors should only count errors !maxtries */
 	if ((le32toh(stat->status) & 0xff) != 1)
@@ -1947,7 +1949,9 @@ wpi_tx_data(struct wpi_softc *sc, struct mbuf *m0, struct ieee80211_node *ni,
 	} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
 		rate = tp->ucastrate;
 	} else {
+#ifndef __HAIKU__
 		(void) ieee80211_ratectl_rate(ni, NULL, 0);
+#endif
 		rate = ni->ni_txrate;
 	}
 	tx->rate = wpi_plcp_signal(rate);

src/add-ons/kernel/drivers/network/wlan/iprowifi4965/dev/iwn/if_iwn.c

@@ -826,9 +826,7 @@ iwn_vap_create(struct ieee80211com *ic,
 	ivp->iv_newstate = vap->iv_newstate;
 	vap->iv_newstate = iwn_newstate;
 
-#ifndef __HAIKU__
 	ieee80211_ratectl_init(vap);
-#endif
 	/* Complete setup. */
 	ieee80211_vap_attach(vap, iwn_media_change, ieee80211_media_status);
 	ic->ic_opmode = opmode;
@@ -840,9 +838,7 @@ iwn_vap_delete(struct ieee80211vap *vap)
 {
 	struct iwn_vap *ivp = IWN_VAP(vap);
 
-#ifndef __HAIKU__
 	ieee80211_ratectl_deinit(vap);
-#endif
 	ieee80211_vap_detach(vap);
 	free(ivp, M_80211_VAP);
 }

src/add-ons/kernel/drivers/network/wlan/ralinkwifi/dev/ral/rt2560.c

@@ -953,10 +953,12 @@ rt2560_tx_intr(struct rt2560_softc *sc)
 			retrycnt = 0;
 
 			DPRINTFN(sc, 10, "%s\n", "data frame sent successfully");
+#ifndef __HAIKU__
 			if (data->rix != IEEE80211_FIXED_RATE_NONE)
 				ieee80211_ratectl_tx_complete(vap, ni,
 				    IEEE80211_RATECTL_TX_SUCCESS,
 				    &retrycnt, NULL);
+#endif
 			ifp->if_opackets++;
 			break;
 
@@ -965,10 +967,12 @@ rt2560_tx_intr(struct rt2560_softc *sc)
 
 			DPRINTFN(sc, 9, "data frame sent after %u retries\n",
 			    retrycnt);
+#ifndef __HAIKU__
 			if (data->rix != IEEE80211_FIXED_RATE_NONE)
 				ieee80211_ratectl_tx_complete(vap, ni,
 				    IEEE80211_RATECTL_TX_SUCCESS,
 				    &retrycnt, NULL);
+#endif
 			ifp->if_opackets++;
 			break;
 
@@ -977,10 +981,12 @@ rt2560_tx_intr(struct rt2560_softc *sc)
 
 			DPRINTFN(sc, 9, "data frame failed after %d retries\n",
 			    retrycnt);
+#ifndef __HAIKU__
 			if (data->rix != IEEE80211_FIXED_RATE_NONE)
 				ieee80211_ratectl_tx_complete(vap, ni,
 				    IEEE80211_RATECTL_TX_FAILURE,
 				    &retrycnt, NULL);
+#endif
 			ifp->if_oerrors++;
 			break;
 
@@ -1800,7 +1806,9 @@ rt2560_tx_data(struct rt2560_softc *sc, struct mbuf *m0,
 	} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
 		rate = tp->ucastrate;
 	} else {
+#ifndef __HAIKU__
 		(void) ieee80211_ratectl_rate(ni, NULL, 0);
+#endif
 		rate = ni->ni_txrate;
 	}
 

src/add-ons/kernel/drivers/network/wlan/ralinkwifi/dev/ral/rt2661.c

@@ -904,10 +904,12 @@ rt2661_tx_intr(struct rt2661_softc *sc)
 
 			DPRINTFN(sc, 10, "data frame sent successfully after "
 			    "%d retries\n", retrycnt);
+#ifndef __HAIKU__
 			if (data->rix != IEEE80211_FIXED_RATE_NONE)
 				ieee80211_ratectl_tx_complete(vap, ni,
 				    IEEE80211_RATECTL_TX_SUCCESS,
 				    &retrycnt, NULL);
+#endif
 			ifp->if_opackets++;
 			break;
 
@@ -916,10 +918,12 @@ rt2661_tx_intr(struct rt2661_softc *sc)
 
 			DPRINTFN(sc, 9, "%s\n",
 			    "sending data frame failed (too much retries)");
+#ifndef __HAIKU__
 			if (data->rix != IEEE80211_FIXED_RATE_NONE)
 				ieee80211_ratectl_tx_complete(vap, ni,
 				    IEEE80211_RATECTL_TX_FAILURE,
 				    &retrycnt, NULL);
+#endif
 			ifp->if_oerrors++;
 			break;
 
@@ -1485,7 +1489,9 @@ rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0,
 	} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
 		rate = tp->ucastrate;
 	} else {
+#ifndef __HAIKU__
 		(void) ieee80211_ratectl_rate(ni, NULL, 0);
+#endif
 		rate = ni->ni_txrate;
 	}
 	rate &= IEEE80211_RATE_VAL;