diff --git a/src/add-ons/kernel/drivers/network/Jamfile b/src/add-ons/kernel/drivers/network/Jamfile index 9278391975..55ad32aa31 100644 --- a/src/add-ons/kernel/drivers/network/Jamfile +++ b/src/add-ons/kernel/drivers/network/Jamfile @@ -21,6 +21,7 @@ SubInclude HAIKU_TOP src add-ons kernel drivers network nforce ; SubInclude HAIKU_TOP src add-ons kernel drivers network pcnet ; SubInclude HAIKU_TOP src add-ons kernel drivers network syskonnect ; SubInclude HAIKU_TOP src add-ons kernel drivers network attansic_l2 ; +SubInclude HAIKU_TOP src add-ons kernel drivers network re ; SubIncludeGPL HAIKU_TOP src add-ons kernel drivers network bcm440x ; SubIncludeGPL HAIKU_TOP src add-ons kernel drivers network bcm570x ; diff --git a/src/add-ons/kernel/drivers/network/re/Jamfile b/src/add-ons/kernel/drivers/network/re/Jamfile new file mode 100644 index 0000000000..9024558667 --- /dev/null +++ b/src/add-ons/kernel/drivers/network/re/Jamfile @@ -0,0 +1,3 @@ +SubDir HAIKU_TOP src add-ons kernel drivers network re ; + +SubInclude HAIKU_TOP src add-ons kernel drivers network re pci ; diff --git a/src/add-ons/kernel/drivers/network/re/pci/Jamfile b/src/add-ons/kernel/drivers/network/re/pci/Jamfile new file mode 100644 index 0000000000..23e6656d4e --- /dev/null +++ b/src/add-ons/kernel/drivers/network/re/pci/Jamfile @@ -0,0 +1,16 @@ +SubDir HAIKU_TOP src add-ons kernel drivers network re pci ; + +UsePrivateHeaders kernel net ; + +UseHeaders [ FDirName $(SUBDIR) .. ] : true ; +UseHeaders [ FDirName $(HAIKU_TOP) src libs compat freebsd_network compat ] : true ; +UseHeaders [ FDirName $(HAIKU_TOP) src add-ons kernel drivers network rtl8139 ] : true ; + +SubDirCcFlags [ FDefines _KERNEL=1 FBSD_DRIVER=1 ] ; + +KernelAddon re : + if_re.c + glue.c + : libfreebsd_network.a rtl8139_mii.a + ; + diff --git a/src/add-ons/kernel/drivers/network/re/pci/glue.c b/src/add-ons/kernel/drivers/network/re/pci/glue.c new file mode 100644 index 0000000000..74a6a93a04 --- /dev/null +++ b/src/add-ons/kernel/drivers/network/re/pci/glue.c @@ -0,0 +1,37 @@ +#include +#include + +HAIKU_FBSD_DRIVER_GLUE(re, re, pci); +HAIKU_FBSD_MII_DRIVER(rlphy); +HAIKU_DRIVER_REQUIREMENTS(FBSD_TASKQUEUES | FBSD_FAST_TASKQUEUE); + +int +HAIKU_CHECK_DISABLE_INTERRUPTS(device_t dev) +{ + struct rl_softc *sc = device_get_softc(dev); + uint16_t status; + + status = CSR_READ_2(sc, RL_ISR); + if (status == 0xffff) + return 0; + if (status != 0 && (status & RL_INTRS) == 0) { + CSR_WRITE_2(sc, RL_ISR, status); + return 0; + } + if ((status & RL_INTRS) == 0) + return 0; + + CSR_WRITE_2(sc, RL_IMR, 0); + return 1; +} + + +void +HAIKU_REENABLE_INTERRUPTS(device_t dev) +{ + struct rl_softc *sc = device_get_softc(dev); + RL_LOCK(sc); + CSR_WRITE_2(sc, RL_IMR, RL_INTRS); + RL_UNLOCK(sc); +} + diff --git a/src/add-ons/kernel/drivers/network/re/pci/if_re.c b/src/add-ons/kernel/drivers/network/re/pci/if_re.c new file mode 100644 index 0000000000..5116a1b3d0 --- /dev/null +++ b/src/add-ons/kernel/drivers/network/re/pci/if_re.c @@ -0,0 +1,3149 @@ +/*- + * Copyright (c) 1997, 1998-2003 + * Bill Paul . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +__FBSDID("$FreeBSD: src/sys/dev/re/if_re.c,v 1.95.2.36 2008/09/19 03:36:53 yongari Exp $"); + +/* + * RealTek 8139C+/8169/8169S/8110S/8168/8111/8101E PCI NIC driver + * + * Written by Bill Paul + * Senior Networking Software Engineer + * Wind River Systems + */ + +/* + * This driver is designed to support RealTek's next generation of + * 10/100 and 10/100/1000 PCI ethernet controllers. There are currently + * seven devices in this family: the RTL8139C+, the RTL8169, the RTL8169S, + * RTL8110S, the RTL8168, the RTL8111 and the RTL8101E. + * + * The 8139C+ is a 10/100 ethernet chip. It is backwards compatible + * with the older 8139 family, however it also supports a special + * C+ mode of operation that provides several new performance enhancing + * features. These include: + * + * o Descriptor based DMA mechanism. Each descriptor represents + * a single packet fragment. Data buffers may be aligned on + * any byte boundary. + * + * o 64-bit DMA + * + * o TCP/IP checksum offload for both RX and TX + * + * o High and normal priority transmit DMA rings + * + * o VLAN tag insertion and extraction + * + * o TCP large send (segmentation offload) + * + * Like the 8139, the 8139C+ also has a built-in 10/100 PHY. The C+ + * programming API is fairly straightforward. The RX filtering, EEPROM + * access and PHY access is the same as it is on the older 8139 series + * chips. + * + * The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC. It has almost the + * same programming API and feature set as the 8139C+ with the following + * differences and additions: + * + * o 1000Mbps mode + * + * o Jumbo frames + * + * o GMII and TBI ports/registers for interfacing with copper + * or fiber PHYs + * + * o RX and TX DMA rings can have up to 1024 descriptors + * (the 8139C+ allows a maximum of 64) + * + * o Slight differences in register layout from the 8139C+ + * + * The TX start and timer interrupt registers are at different locations + * on the 8169 than they are on the 8139C+. Also, the status word in the + * RX descriptor has a slightly different bit layout. The 8169 does not + * have a built-in PHY. Most reference boards use a Marvell 88E1000 'Alaska' + * copper gigE PHY. + * + * The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs + * (the 'S' stands for 'single-chip'). These devices have the same + * programming API as the older 8169, but also have some vendor-specific + * registers for the on-board PHY. The 8110S is a LAN-on-motherboard + * part designed to be pin-compatible with the RealTek 8100 10/100 chip. + * + * This driver takes advantage of the RX and TX checksum offload and + * VLAN tag insertion/extraction features. It also implements TX + * interrupt moderation using the timer interrupt registers, which + * significantly reduces TX interrupt load. There is also support + * for jumbo frames, however the 8169/8169S/8110S can not transmit + * jumbo frames larger than 7440, so the max MTU possible with this + * driver is 7422 bytes. + */ + +#ifdef HAVE_KERNEL_OPTION_HEADERS +#include "opt_device_polling.h" +#endif + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include +#include + +#include +#include + +#include +#include + +#include + +MODULE_DEPEND(re, pci, 1, 1, 1); +MODULE_DEPEND(re, ether, 1, 1, 1); +MODULE_DEPEND(re, miibus, 1, 1, 1); + +/* "device miibus" required. See GENERIC if you get errors here. */ +#include "miibus_if.h" + +/* Tunables. */ +static int msi_disable = 1; +TUNABLE_INT("hw.re.msi_disable", &msi_disable); + +#define RE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP) + +/* + * Various supported device vendors/types and their names. + */ +static struct rl_type re_devs[] = { + { DLINK_VENDORID, DLINK_DEVICEID_528T, 0, + "D-Link DGE-528(T) Gigabit Ethernet Adapter" }, + { RT_VENDORID, RT_DEVICEID_8139, 0, + "RealTek 8139C+ 10/100BaseTX" }, + { RT_VENDORID, RT_DEVICEID_8101E, 0, + "RealTek 8101E/8102E/8102EL PCIe 10/100baseTX" }, + { RT_VENDORID, RT_DEVICEID_8168, 0, + "RealTek 8168/8168B/8168C/8168CP/8111B/8111C/8111CP PCIe " + "Gigabit Ethernet" }, + { RT_VENDORID, RT_DEVICEID_8169, 0, + "RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet" }, + { RT_VENDORID, RT_DEVICEID_8169SC, 0, + "RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" }, + { COREGA_VENDORID, COREGA_DEVICEID_CGLAPCIGT, 0, + "Corega CG-LAPCIGT (RTL8169S) Gigabit Ethernet" }, + { LINKSYS_VENDORID, LINKSYS_DEVICEID_EG1032, 0, + "Linksys EG1032 (RTL8169S) Gigabit Ethernet" }, + { USR_VENDORID, USR_DEVICEID_997902, 0, + "US Robotics 997902 (RTL8169S) Gigabit Ethernet" } +}; + +static struct rl_hwrev re_hwrevs[] = { + { RL_HWREV_8139, RL_8139, "" }, + { RL_HWREV_8139A, RL_8139, "A" }, + { RL_HWREV_8139AG, RL_8139, "A-G" }, + { RL_HWREV_8139B, RL_8139, "B" }, + { RL_HWREV_8130, RL_8139, "8130" }, + { RL_HWREV_8139C, RL_8139, "C" }, + { RL_HWREV_8139D, RL_8139, "8139D/8100B/8100C" }, + { RL_HWREV_8139CPLUS, RL_8139CPLUS, "C+"}, + { RL_HWREV_8168_SPIN1, RL_8169, "8168"}, + { RL_HWREV_8169, RL_8169, "8169"}, + { RL_HWREV_8169S, RL_8169, "8169S"}, + { RL_HWREV_8110S, RL_8169, "8110S"}, + { RL_HWREV_8169_8110SB, RL_8169, "8169SB"}, + { RL_HWREV_8169_8110SC, RL_8169, "8169SC"}, + { RL_HWREV_8169_8110SBL, RL_8169, "8169SBL"}, + { RL_HWREV_8100, RL_8139, "8100"}, + { RL_HWREV_8101, RL_8139, "8101"}, + { RL_HWREV_8100E, RL_8169, "8100E"}, + { RL_HWREV_8101E, RL_8169, "8101E"}, + { RL_HWREV_8102E, RL_8169, "8102E"}, + { RL_HWREV_8102EL, RL_8169, "8102EL"}, + { RL_HWREV_8168_SPIN2, RL_8169, "8168"}, + { RL_HWREV_8168_SPIN3, RL_8169, "8168"}, + { RL_HWREV_8168C, RL_8169, "8168C/8111C"}, + { RL_HWREV_8168C_SPIN2, RL_8169, "8168C/8111C"}, + { RL_HWREV_8168CP, RL_8169, "8168CP/8111CP"}, + { 0, 0, NULL } +}; + +static int re_probe (device_t); +static int re_attach (device_t); +static int re_detach (device_t); + +static struct mbuf *re_defrag (struct mbuf *, int, int); +static int re_encap (struct rl_softc *, struct mbuf **); + +static void re_dma_map_addr (void *, bus_dma_segment_t *, int, int); +static int re_allocmem (device_t, struct rl_softc *); +static __inline void re_discard_rxbuf + (struct rl_softc *, int); +static int re_newbuf (struct rl_softc *, int); +static int re_rx_list_init (struct rl_softc *); +static int re_tx_list_init (struct rl_softc *); +#ifdef RE_FIXUP_RX +static __inline void re_fixup_rx + (struct mbuf *); +#endif +static int re_rxeof (struct rl_softc *); +static void re_txeof (struct rl_softc *); +#ifdef DEVICE_POLLING +static void re_poll (struct ifnet *, enum poll_cmd, int); +static void re_poll_locked (struct ifnet *, enum poll_cmd, int); +#endif +static int re_intr (void *); +static void re_tick (void *); +static void re_tx_task (void *, int); +static void re_int_task (void *, int); +static void re_start (struct ifnet *); +static int re_ioctl (struct ifnet *, u_long, caddr_t); +static void re_init (void *); +static void re_init_locked (struct rl_softc *); +static void re_stop (struct rl_softc *); +static void re_watchdog (struct rl_softc *); +static int re_suspend (device_t); +static int re_resume (device_t); +static int re_shutdown (device_t); +static int re_ifmedia_upd (struct ifnet *); +static void re_ifmedia_sts (struct ifnet *, struct ifmediareq *); + +static void re_eeprom_putbyte (struct rl_softc *, int); +static void re_eeprom_getword (struct rl_softc *, int, u_int16_t *); +static void re_read_eeprom (struct rl_softc *, caddr_t, int, int); +static int re_gmii_readreg (device_t, int, int); +static int re_gmii_writereg (device_t, int, int, int); + +static int re_miibus_readreg (device_t, int, int); +static int re_miibus_writereg (device_t, int, int, int); +static void re_miibus_statchg (device_t); + +static void re_setmulti (struct rl_softc *); +static void re_reset (struct rl_softc *); +static void re_setwol (struct rl_softc *); +static void re_clrwol (struct rl_softc *); + +#ifdef RE_DIAG +static int re_diag (struct rl_softc *); +#endif + +static device_method_t re_methods[] = { + /* Device interface */ + DEVMETHOD(device_probe, re_probe), + DEVMETHOD(device_attach, re_attach), + DEVMETHOD(device_detach, re_detach), + DEVMETHOD(device_suspend, re_suspend), + DEVMETHOD(device_resume, re_resume), + DEVMETHOD(device_shutdown, re_shutdown), + + /* bus interface */ + DEVMETHOD(bus_print_child, bus_generic_print_child), + DEVMETHOD(bus_driver_added, bus_generic_driver_added), + + /* MII interface */ + DEVMETHOD(miibus_readreg, re_miibus_readreg), + DEVMETHOD(miibus_writereg, re_miibus_writereg), + DEVMETHOD(miibus_statchg, re_miibus_statchg), + + { 0, 0 } +}; + +static driver_t re_driver = { + "re", + re_methods, + sizeof(struct rl_softc) +}; + +static devclass_t re_devclass; + +DRIVER_MODULE(re, pci, re_driver, re_devclass, 0, 0); +DRIVER_MODULE(re, cardbus, re_driver, re_devclass, 0, 0); +DRIVER_MODULE(miibus, re, miibus_driver, miibus_devclass, 0, 0); + +#define EE_SET(x) \ + CSR_WRITE_1(sc, RL_EECMD, \ + CSR_READ_1(sc, RL_EECMD) | x) + +#define EE_CLR(x) \ + CSR_WRITE_1(sc, RL_EECMD, \ + CSR_READ_1(sc, RL_EECMD) & ~x) + +/* + * Send a read command and address to the EEPROM, check for ACK. + */ +static void +re_eeprom_putbyte(struct rl_softc *sc, int addr) +{ + int d, i; + + d = addr | (RL_9346_READ << sc->rl_eewidth); + + /* + * Feed in each bit and strobe the clock. + */ + + for (i = 1 << (sc->rl_eewidth + 3); i; i >>= 1) { + if (d & i) { + EE_SET(RL_EE_DATAIN); + } else { + EE_CLR(RL_EE_DATAIN); + } + DELAY(100); + EE_SET(RL_EE_CLK); + DELAY(150); + EE_CLR(RL_EE_CLK); + DELAY(100); + } +} + +/* + * Read a word of data stored in the EEPROM at address 'addr.' + */ +static void +re_eeprom_getword(struct rl_softc *sc, int addr, u_int16_t *dest) +{ + int i; + u_int16_t word = 0; + + /* + * Send address of word we want to read. + */ + re_eeprom_putbyte(sc, addr); + + /* + * Start reading bits from EEPROM. + */ + for (i = 0x8000; i; i >>= 1) { + EE_SET(RL_EE_CLK); + DELAY(100); + if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT) + word |= i; + EE_CLR(RL_EE_CLK); + DELAY(100); + } + + *dest = word; +} + +/* + * Read a sequence of words from the EEPROM. + */ +static void +re_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt) +{ + int i; + u_int16_t word = 0, *ptr; + + CSR_SETBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM); + + DELAY(100); + + for (i = 0; i < cnt; i++) { + CSR_SETBIT_1(sc, RL_EECMD, RL_EE_SEL); + re_eeprom_getword(sc, off + i, &word); + CSR_CLRBIT_1(sc, RL_EECMD, RL_EE_SEL); + ptr = (u_int16_t *)(dest + (i * 2)); + *ptr = word; + } + + CSR_CLRBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM); +} + +static int +re_gmii_readreg(device_t dev, int phy, int reg) +{ + struct rl_softc *sc; + u_int32_t rval; + int i; + + if (phy != 1) + return (0); + + sc = device_get_softc(dev); + + /* Let the rgephy driver read the GMEDIASTAT register */ + + if (reg == RL_GMEDIASTAT) { + rval = CSR_READ_1(sc, RL_GMEDIASTAT); + return (rval); + } + + CSR_WRITE_4(sc, RL_PHYAR, reg << 16); + DELAY(1000); + + for (i = 0; i < RL_TIMEOUT; i++) { + rval = CSR_READ_4(sc, RL_PHYAR); + if (rval & RL_PHYAR_BUSY) + break; + DELAY(100); + } + + if (i == RL_TIMEOUT) { + device_printf(sc->rl_dev, "PHY read failed\n"); + return (0); + } + + return (rval & RL_PHYAR_PHYDATA); +} + +static int +re_gmii_writereg(device_t dev, int phy, int reg, int data) +{ + struct rl_softc *sc; + u_int32_t rval; + int i; + + sc = device_get_softc(dev); + + CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) | + (data & RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY); + DELAY(1000); + + for (i = 0; i < RL_TIMEOUT; i++) { + rval = CSR_READ_4(sc, RL_PHYAR); + if (!(rval & RL_PHYAR_BUSY)) + break; + DELAY(100); + } + + if (i == RL_TIMEOUT) { + device_printf(sc->rl_dev, "PHY write failed\n"); + return (0); + } + + return (0); +} + +static int +re_miibus_readreg(device_t dev, int phy, int reg) +{ + struct rl_softc *sc; + u_int16_t rval = 0; + u_int16_t re8139_reg = 0; + + sc = device_get_softc(dev); + + if (sc->rl_type == RL_8169) { + rval = re_gmii_readreg(dev, phy, reg); + return (rval); + } + + /* Pretend the internal PHY is only at address 0 */ + if (phy) { + return (0); + } + switch (reg) { + case MII_BMCR: + re8139_reg = RL_BMCR; + break; + case MII_BMSR: + re8139_reg = RL_BMSR; + break; + case MII_ANAR: + re8139_reg = RL_ANAR; + break; + case MII_ANER: + re8139_reg = RL_ANER; + break; + case MII_ANLPAR: + re8139_reg = RL_LPAR; + break; + case MII_PHYIDR1: + case MII_PHYIDR2: + return (0); + /* + * Allow the rlphy driver to read the media status + * register. If we have a link partner which does not + * support NWAY, this is the register which will tell + * us the results of parallel detection. + */ + case RL_MEDIASTAT: + rval = CSR_READ_1(sc, RL_MEDIASTAT); + return (rval); + default: + device_printf(sc->rl_dev, "bad phy register\n"); + return (0); + } + rval = CSR_READ_2(sc, re8139_reg); + if (sc->rl_type == RL_8139CPLUS && re8139_reg == RL_BMCR) { + /* 8139C+ has different bit layout. */ + rval &= ~(BMCR_LOOP | BMCR_ISO); + } + return (rval); +} + +static int +re_miibus_writereg(device_t dev, int phy, int reg, int data) +{ + struct rl_softc *sc; + u_int16_t re8139_reg = 0; + int rval = 0; + + sc = device_get_softc(dev); + + if (sc->rl_type == RL_8169) { + rval = re_gmii_writereg(dev, phy, reg, data); + return (rval); + } + + /* Pretend the internal PHY is only at address 0 */ + if (phy) + return (0); + + switch (reg) { + case MII_BMCR: + re8139_reg = RL_BMCR; + if (sc->rl_type == RL_8139CPLUS) { + /* 8139C+ has different bit layout. */ + data &= ~(BMCR_LOOP | BMCR_ISO); + } + break; + case MII_BMSR: + re8139_reg = RL_BMSR; + break; + case MII_ANAR: + re8139_reg = RL_ANAR; + break; + case MII_ANER: + re8139_reg = RL_ANER; + break; + case MII_ANLPAR: + re8139_reg = RL_LPAR; + break; + case MII_PHYIDR1: + case MII_PHYIDR2: + return (0); + break; + default: + device_printf(sc->rl_dev, "bad phy register\n"); + return (0); + } + CSR_WRITE_2(sc, re8139_reg, data); + return (0); +} + +static void +re_miibus_statchg(device_t dev) +{ + +} + +/* + * Program the 64-bit multicast hash filter. + */ +static void +re_setmulti(struct rl_softc *sc) +{ + struct ifnet *ifp; + int h = 0; + u_int32_t hashes[2] = { 0, 0 }; + struct ifmultiaddr *ifma; + u_int32_t rxfilt; + int mcnt = 0; + + RL_LOCK_ASSERT(sc); + + ifp = sc->rl_ifp; + + + rxfilt = CSR_READ_4(sc, RL_RXCFG); + rxfilt &= ~(RL_RXCFG_RX_ALLPHYS | RL_RXCFG_RX_MULTI); + if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { + if (ifp->if_flags & IFF_PROMISC) + rxfilt |= RL_RXCFG_RX_ALLPHYS; + /* + * Unlike other hardwares, we have to explicitly set + * RL_RXCFG_RX_MULTI to receive multicast frames in + * promiscuous mode. + */ + rxfilt |= RL_RXCFG_RX_MULTI; + CSR_WRITE_4(sc, RL_RXCFG, rxfilt); + CSR_WRITE_4(sc, RL_MAR0, 0xFFFFFFFF); + CSR_WRITE_4(sc, RL_MAR4, 0xFFFFFFFF); + return; + } + + /* first, zot all the existing hash bits */ + CSR_WRITE_4(sc, RL_MAR0, 0); + CSR_WRITE_4(sc, RL_MAR4, 0); + + /* now program new ones */ + IF_ADDR_LOCK(ifp); + TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) { + if (ifma->ifma_addr->sa_family != AF_LINK) + continue; + h = ether_crc32_be(LLADDR((struct sockaddr_dl *) + ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; + if (h < 32) + hashes[0] |= (1 << h); + else + hashes[1] |= (1 << (h - 32)); + mcnt++; + } + IF_ADDR_UNLOCK(ifp); + + if (mcnt) + rxfilt |= RL_RXCFG_RX_MULTI; + else + rxfilt &= ~RL_RXCFG_RX_MULTI; + + CSR_WRITE_4(sc, RL_RXCFG, rxfilt); + + /* + * For some unfathomable reason, RealTek decided to reverse + * the order of the multicast hash registers in the PCI Express + * parts. This means we have to write the hash pattern in reverse + * order for those devices. + */ + + if ((sc->rl_flags & RL_FLAG_INVMAR) != 0) { + CSR_WRITE_4(sc, RL_MAR0, bswap32(hashes[1])); + CSR_WRITE_4(sc, RL_MAR4, bswap32(hashes[0])); + } else { + CSR_WRITE_4(sc, RL_MAR0, hashes[0]); + CSR_WRITE_4(sc, RL_MAR4, hashes[1]); + } +} + +static void +re_reset(struct rl_softc *sc) +{ + int i; + + RL_LOCK_ASSERT(sc); + + CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET); + + for (i = 0; i < RL_TIMEOUT; i++) { + DELAY(10); + if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET)) + break; + } + if (i == RL_TIMEOUT) + device_printf(sc->rl_dev, "reset never completed!\n"); + + CSR_WRITE_1(sc, 0x82, 1); +} + +#ifdef RE_DIAG + +/* + * The following routine is designed to test for a defect on some + * 32-bit 8169 cards. Some of these NICs have the REQ64# and ACK64# + * lines connected to the bus, however for a 32-bit only card, they + * should be pulled high. The result of this defect is that the + * NIC will not work right if you plug it into a 64-bit slot: DMA + * operations will be done with 64-bit transfers, which will fail + * because the 64-bit data lines aren't connected. + * + * There's no way to work around this (short of talking a soldering + * iron to the board), however we can detect it. The method we use + * here is to put the NIC into digital loopback mode, set the receiver + * to promiscuous mode, and then try to send a frame. We then compare + * the frame data we sent to what was received. If the data matches, + * then the NIC is working correctly, otherwise we know the user has + * a defective NIC which has been mistakenly plugged into a 64-bit PCI + * slot. In the latter case, there's no way the NIC can work correctly, + * so we print out a message on the console and abort the device attach. + */ + +static int +re_diag(struct rl_softc *sc) +{ + struct ifnet *ifp = sc->rl_ifp; + struct mbuf *m0; + struct ether_header *eh; + struct rl_desc *cur_rx; + u_int16_t status; + u_int32_t rxstat; + int total_len, i, error = 0, phyaddr; + u_int8_t dst[] = { 0x00, 'h', 'e', 'l', 'l', 'o' }; + u_int8_t src[] = { 0x00, 'w', 'o', 'r', 'l', 'd' }; + + /* Allocate a single mbuf */ + MGETHDR(m0, M_DONTWAIT, MT_DATA); + if (m0 == NULL) + return (ENOBUFS); + + RL_LOCK(sc); + + /* + * Initialize the NIC in test mode. This sets the chip up + * so that it can send and receive frames, but performs the + * following special functions: + * - Puts receiver in promiscuous mode + * - Enables digital loopback mode + * - Leaves interrupts turned off + */ + + ifp->if_flags |= IFF_PROMISC; + sc->rl_testmode = 1; + re_reset(sc); + re_init_locked(sc); + sc->rl_flags |= RL_FLAG_LINK; + if (sc->rl_type == RL_8169) + phyaddr = 1; + else + phyaddr = 0; + + re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_RESET); + for (i = 0; i < RL_TIMEOUT; i++) { + status = re_miibus_readreg(sc->rl_dev, phyaddr, MII_BMCR); + if (!(status & BMCR_RESET)) + break; + } + + re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_LOOP); + CSR_WRITE_2(sc, RL_ISR, RL_INTRS); + + DELAY(100000); + + /* Put some data in the mbuf */ + + eh = mtod(m0, struct ether_header *); + bcopy ((char *)&dst, eh->ether_dhost, ETHER_ADDR_LEN); + bcopy ((char *)&src, eh->ether_shost, ETHER_ADDR_LEN); + eh->ether_type = htons(ETHERTYPE_IP); + m0->m_pkthdr.len = m0->m_len = ETHER_MIN_LEN - ETHER_CRC_LEN; + + /* + * Queue the packet, start transmission. + * Note: IF_HANDOFF() ultimately calls re_start() for us. + */ + + CSR_WRITE_2(sc, RL_ISR, 0xFFFF); + RL_UNLOCK(sc); + /* XXX: re_diag must not be called when in ALTQ mode */ + IF_HANDOFF(&ifp->if_snd, m0, ifp); + RL_LOCK(sc); + m0 = NULL; + + /* Wait for it to propagate through the chip */ + + DELAY(100000); + for (i = 0; i < RL_TIMEOUT; i++) { + status = CSR_READ_2(sc, RL_ISR); + CSR_WRITE_2(sc, RL_ISR, status); + if ((status & (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) == + (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) + break; + DELAY(10); + } + + if (i == RL_TIMEOUT) { + device_printf(sc->rl_dev, + "diagnostic failed, failed to receive packet in" + " loopback mode\n"); + error = EIO; + goto done; + } + + /* + * The packet should have been dumped into the first + * entry in the RX DMA ring. Grab it from there. + */ + + bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map, + BUS_DMASYNC_POSTREAD); + bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, + sc->rl_ldata.rl_rx_desc[0].rx_dmamap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, + sc->rl_ldata.rl_rx_desc[0].rx_dmamap); + + m0 = sc->rl_ldata.rl_rx_desc[0].rx_m; + sc->rl_ldata.rl_rx_desc[0].rx_m = NULL; + eh = mtod(m0, struct ether_header *); + + cur_rx = &sc->rl_ldata.rl_rx_list[0]; + total_len = RL_RXBYTES(cur_rx); + rxstat = le32toh(cur_rx->rl_cmdstat); + + if (total_len != ETHER_MIN_LEN) { + device_printf(sc->rl_dev, + "diagnostic failed, received short packet\n"); + error = EIO; + goto done; + } + + /* Test that the received packet data matches what we sent. */ + + if (bcmp((char *)&eh->ether_dhost, (char *)&dst, ETHER_ADDR_LEN) || + bcmp((char *)&eh->ether_shost, (char *)&src, ETHER_ADDR_LEN) || + ntohs(eh->ether_type) != ETHERTYPE_IP) { + device_printf(sc->rl_dev, "WARNING, DMA FAILURE!\n"); + device_printf(sc->rl_dev, "expected TX data: %6D/%6D/0x%x\n", + dst, ":", src, ":", ETHERTYPE_IP); + device_printf(sc->rl_dev, "received RX data: %6D/%6D/0x%x\n", + eh->ether_dhost, ":", eh->ether_shost, ":", + ntohs(eh->ether_type)); + device_printf(sc->rl_dev, "You may have a defective 32-bit " + "NIC plugged into a 64-bit PCI slot.\n"); + device_printf(sc->rl_dev, "Please re-install the NIC in a " + "32-bit slot for proper operation.\n"); + device_printf(sc->rl_dev, "Read the re(4) man page for more " + "details.\n"); + error = EIO; + } + +done: + /* Turn interface off, release resources */ + + sc->rl_testmode = 0; + sc->rl_flags &= ~RL_FLAG_LINK; + ifp->if_flags &= ~IFF_PROMISC; + re_stop(sc); + if (m0 != NULL) + m_freem(m0); + + RL_UNLOCK(sc); + + return (error); +} + +#endif + +/* + * Probe for a RealTek 8139C+/8169/8110 chip. Check the PCI vendor and device + * IDs against our list and return a device name if we find a match. + */ +static int +re_probe(device_t dev) +{ + struct rl_type *t; + uint16_t devid, vendor; + uint16_t revid, sdevid; + int i; + + vendor = pci_get_vendor(dev); + devid = pci_get_device(dev); + revid = pci_get_revid(dev); + sdevid = pci_get_subdevice(dev); + + if (vendor == LINKSYS_VENDORID && devid == LINKSYS_DEVICEID_EG1032) { + if (sdevid != LINKSYS_SUBDEVICE_EG1032_REV3) { + /* + * Only attach to rev. 3 of the Linksys EG1032 adapter. + * Rev. 2 is supported by sk(4). + */ + return (ENXIO); + } + } + + if (vendor == RT_VENDORID && devid == RT_DEVICEID_8139) { + if (revid != 0x20) { + /* 8139, let rl(4) take care of this device. */ + return (ENXIO); + } + } + + t = re_devs; + for (i = 0; i < sizeof(re_devs) / sizeof(re_devs[0]); i++, t++) { + if (vendor == t->rl_vid && devid == t->rl_did) { + device_set_desc(dev, t->rl_name); + return (BUS_PROBE_DEFAULT); + } + } + + return (ENXIO); +} + +/* + * Map a single buffer address. + */ + +static void +re_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error) +{ + bus_addr_t *addr; + + if (error) + return; + + KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg)); + addr = arg; + *addr = segs->ds_addr; +} + +static int +re_allocmem(device_t dev, struct rl_softc *sc) +{ + bus_size_t rx_list_size, tx_list_size; + int error; + int i; + + rx_list_size = sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc); + tx_list_size = sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc); + + /* + * Allocate the parent bus DMA tag appropriate for PCI. + * In order to use DAC, RL_CPLUSCMD_PCI_DAC bit of RL_CPLUS_CMD + * register should be set. However some RealTek chips are known + * to be buggy on DAC handling, therefore disable DAC by limiting + * DMA address space to 32bit. PCIe variants of RealTek chips + * may not have the limitation but I took safer path. + */ + error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0, + BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, + BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0, + NULL, NULL, &sc->rl_parent_tag); + if (error) { + device_printf(dev, "could not allocate parent DMA tag\n"); + return (error); + } + + /* + * Allocate map for TX mbufs. + */ + error = bus_dma_tag_create(sc->rl_parent_tag, 1, 0, + BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, + NULL, MCLBYTES * RL_NTXSEGS, RL_NTXSEGS, 4096, 0, + NULL, NULL, &sc->rl_ldata.rl_tx_mtag); + if (error) { + device_printf(dev, "could not allocate TX DMA tag\n"); + return (error); + } + + /* + * Allocate map for RX mbufs. + */ + + error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t), 0, + BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, + MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &sc->rl_ldata.rl_rx_mtag); + if (error) { + device_printf(dev, "could not allocate RX DMA tag\n"); + return (error); + } + + /* + * Allocate map for TX descriptor list. + */ + error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN, + 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, + NULL, tx_list_size, 1, tx_list_size, 0, + NULL, NULL, &sc->rl_ldata.rl_tx_list_tag); + if (error) { + device_printf(dev, "could not allocate TX DMA ring tag\n"); + return (error); + } + + /* Allocate DMA'able memory for the TX ring */ + + error = bus_dmamem_alloc(sc->rl_ldata.rl_tx_list_tag, + (void **)&sc->rl_ldata.rl_tx_list, + BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, + &sc->rl_ldata.rl_tx_list_map); + if (error) { + device_printf(dev, "could not allocate TX DMA ring\n"); + return (error); + } + + /* Load the map for the TX ring. */ + + sc->rl_ldata.rl_tx_list_addr = 0; + error = bus_dmamap_load(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list_map, sc->rl_ldata.rl_tx_list, + tx_list_size, re_dma_map_addr, + &sc->rl_ldata.rl_tx_list_addr, BUS_DMA_NOWAIT); + if (error != 0 || sc->rl_ldata.rl_tx_list_addr == 0) { + device_printf(dev, "could not load TX DMA ring\n"); + return (ENOMEM); + } + + /* Create DMA maps for TX buffers */ + + for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) { + error = bus_dmamap_create(sc->rl_ldata.rl_tx_mtag, 0, + &sc->rl_ldata.rl_tx_desc[i].tx_dmamap); + if (error) { + device_printf(dev, "could not create DMA map for TX\n"); + return (error); + } + } + + /* + * Allocate map for RX descriptor list. + */ + error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN, + 0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, + NULL, rx_list_size, 1, rx_list_size, 0, + NULL, NULL, &sc->rl_ldata.rl_rx_list_tag); + if (error) { + device_printf(dev, "could not create RX DMA ring tag\n"); + return (error); + } + + /* Allocate DMA'able memory for the RX ring */ + + error = bus_dmamem_alloc(sc->rl_ldata.rl_rx_list_tag, + (void **)&sc->rl_ldata.rl_rx_list, + BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, + &sc->rl_ldata.rl_rx_list_map); + if (error) { + device_printf(dev, "could not allocate RX DMA ring\n"); + return (error); + } + + /* Load the map for the RX ring. */ + + sc->rl_ldata.rl_rx_list_addr = 0; + error = bus_dmamap_load(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map, sc->rl_ldata.rl_rx_list, + rx_list_size, re_dma_map_addr, + &sc->rl_ldata.rl_rx_list_addr, BUS_DMA_NOWAIT); + if (error != 0 || sc->rl_ldata.rl_rx_list_addr == 0) { + device_printf(dev, "could not load RX DMA ring\n"); + return (ENOMEM); + } + + /* Create DMA maps for RX buffers */ + + error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0, + &sc->rl_ldata.rl_rx_sparemap); + if (error) { + device_printf(dev, "could not create spare DMA map for RX\n"); + return (error); + } + for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { + error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0, + &sc->rl_ldata.rl_rx_desc[i].rx_dmamap); + if (error) { + device_printf(dev, "could not create DMA map for RX\n"); + return (error); + } + } + + return (0); +} + +/* + * Attach the interface. Allocate softc structures, do ifmedia + * setup and ethernet/BPF attach. + */ +static int +re_attach(device_t dev) +{ + u_char eaddr[ETHER_ADDR_LEN]; + u_int16_t as[ETHER_ADDR_LEN / 2]; + struct rl_softc *sc; + struct ifnet *ifp; + struct rl_hwrev *hw_rev; + int hwrev; + u_int16_t devid, re_did = 0; + int error = 0, rid, i; + int msic, reg; + uint8_t cfg; + + sc = device_get_softc(dev); + sc->rl_dev = dev; + + mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK, + MTX_DEF); + callout_init_mtx(&sc->rl_stat_callout, &sc->rl_mtx, 0); + + /* + * Map control/status registers. + */ + pci_enable_busmaster(dev); + + devid = pci_get_device(dev); + /* Prefer memory space register mapping over IO space. */ + sc->rl_res_id = PCIR_BAR(1); + sc->rl_res_type = SYS_RES_MEMORY; + /* RTL8168/8101E seems to use different BARs. */ + if (devid == RT_DEVICEID_8168 || devid == RT_DEVICEID_8101E) + sc->rl_res_id = PCIR_BAR(2); + sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type, + &sc->rl_res_id, RF_ACTIVE); + + if (sc->rl_res == NULL) { + sc->rl_res_id = PCIR_BAR(0); + sc->rl_res_type = SYS_RES_IOPORT; + sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type, + &sc->rl_res_id, RF_ACTIVE); + if (sc->rl_res == NULL) { + device_printf(dev, "couldn't map ports/memory\n"); + error = ENXIO; + goto fail; + } + } + + sc->rl_btag = rman_get_bustag(sc->rl_res); + sc->rl_bhandle = rman_get_bushandle(sc->rl_res); + + msic = 0; + if (pci_find_extcap(dev, PCIY_EXPRESS, ®) == 0) { + msic = pci_msi_count(dev); + if (bootverbose) + device_printf(dev, "MSI count : %d\n", msic); + } + if (msic == RL_MSI_MESSAGES && msi_disable == 0) { + if (pci_alloc_msi(dev, &msic) == 0) { + if (msic == RL_MSI_MESSAGES) { + device_printf(dev, "Using %d MSI messages\n", + msic); + sc->rl_flags |= RL_FLAG_MSI; + /* Explicitly set MSI enable bit. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); + cfg = CSR_READ_1(sc, RL_CFG2); + cfg |= RL_CFG2_MSI; + CSR_WRITE_1(sc, RL_CFG2, cfg); + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + } else + pci_release_msi(dev); + } + } + + /* Allocate interrupt */ + if ((sc->rl_flags & RL_FLAG_MSI) == 0) { + rid = 0; + sc->rl_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, + RF_SHAREABLE | RF_ACTIVE); + if (sc->rl_irq[0] == NULL) { + device_printf(dev, "couldn't allocate IRQ resources\n"); + error = ENXIO; + goto fail; + } + } else { + for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) { + sc->rl_irq[i] = bus_alloc_resource_any(dev, + SYS_RES_IRQ, &rid, RF_ACTIVE); + if (sc->rl_irq[i] == NULL) { + device_printf(dev, + "couldn't llocate IRQ resources for " + "message %d\n", rid); + error = ENXIO; + goto fail; + } + } + } + + if ((sc->rl_flags & RL_FLAG_MSI) == 0) { + CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); + cfg = CSR_READ_1(sc, RL_CFG2); + if ((cfg & RL_CFG2_MSI) != 0) { + device_printf(dev, "turning off MSI enable bit.\n"); + cfg &= ~RL_CFG2_MSI; + CSR_WRITE_1(sc, RL_CFG2, cfg); + } + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + } + + /* Reset the adapter. */ + RL_LOCK(sc); + re_reset(sc); + RL_UNLOCK(sc); + + hw_rev = re_hwrevs; + hwrev = CSR_READ_4(sc, RL_TXCFG); + device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0x7c800000); + device_printf(dev, "MAC rev. 0x%08x\n", hwrev & 0x00700000); + hwrev &= RL_TXCFG_HWREV; + while (hw_rev->rl_desc != NULL) { + if (hw_rev->rl_rev == hwrev) { + sc->rl_type = hw_rev->rl_type; + break; + } + hw_rev++; + } + if (hw_rev->rl_desc == NULL) { + device_printf(dev, "Unknown H/W revision: 0x%08x\n", hwrev); + error = ENXIO; + goto fail; + } + + switch (hw_rev->rl_rev) { + case RL_HWREV_8139CPLUS: + sc->rl_flags |= RL_FLAG_NOJUMBO; + break; + case RL_HWREV_8100E: + case RL_HWREV_8101E: + sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_INVMAR | + RL_FLAG_PHYWAKE; + break; + case RL_HWREV_8102E: + case RL_HWREV_8102EL: + sc->rl_flags |= RL_FLAG_NOJUMBO | RL_FLAG_INVMAR | + RL_FLAG_PHYWAKE | RL_FLAG_PAR | RL_FLAG_DESCV2 | + RL_FLAG_MACSTAT; + break; + case RL_HWREV_8168_SPIN1: + case RL_HWREV_8168_SPIN2: + case RL_HWREV_8168_SPIN3: + sc->rl_flags |= RL_FLAG_INVMAR | RL_FLAG_PHYWAKE | + RL_FLAG_MACSTAT; + break; + case RL_HWREV_8168C: + case RL_HWREV_8168C_SPIN2: + case RL_HWREV_8168CP: + sc->rl_flags |= RL_FLAG_INVMAR | RL_FLAG_PHYWAKE | + RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT; + /* + * These controllers support jumbo frame but it seems + * that enabling it requires touching additional magic + * registers. Depending on MAC revisions some + * controllers need to disable checksum offload. So + * disable jumbo frame until I have better idea what + * it really requires to make it support. + * RTL8168C/CP : supports up to 6KB jumbo frame. + * RTL8111C/CP : supports up to 9KB jumbo frame. + */ + sc->rl_flags |= RL_FLAG_NOJUMBO; + break; + case RL_HWREV_8169_8110SB: + case RL_HWREV_8169_8110SC: + case RL_HWREV_8169_8110SBL: + sc->rl_flags |= RL_FLAG_PHYWAKE; + break; + default: + break; + } + + /* Enable PME. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); + cfg = CSR_READ_1(sc, RL_CFG1); + cfg |= RL_CFG1_PME; + CSR_WRITE_1(sc, RL_CFG1, cfg); + cfg = CSR_READ_1(sc, RL_CFG5); + cfg &= RL_CFG5_PME_STS; + CSR_WRITE_1(sc, RL_CFG5, cfg); + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + + if ((sc->rl_flags & RL_FLAG_PAR) != 0) { + /* + * XXX Should have a better way to extract station + * address from EEPROM. + */ + for (i = 0; i < ETHER_ADDR_LEN; i++) + eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i); + } else { + sc->rl_eewidth = RL_9356_ADDR_LEN; + re_read_eeprom(sc, (caddr_t)&re_did, 0, 1); + if (re_did != 0x8129) + sc->rl_eewidth = RL_9346_ADDR_LEN; + + /* + * Get station address from the EEPROM. + */ + re_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3); + for (i = 0; i < ETHER_ADDR_LEN / 2; i++) + as[i] = le16toh(as[i]); + bcopy(as, eaddr, sizeof(eaddr)); + } + + if (sc->rl_type == RL_8169) { + /* Set RX length mask and number of descriptors. */ + sc->rl_rxlenmask = RL_RDESC_STAT_GFRAGLEN; + sc->rl_txstart = RL_GTXSTART; + sc->rl_ldata.rl_tx_desc_cnt = RL_8169_TX_DESC_CNT; + sc->rl_ldata.rl_rx_desc_cnt = RL_8169_RX_DESC_CNT; + } else { + /* Set RX length mask and number of descriptors. */ + sc->rl_rxlenmask = RL_RDESC_STAT_FRAGLEN; + sc->rl_txstart = RL_TXSTART; + sc->rl_ldata.rl_tx_desc_cnt = RL_8139_TX_DESC_CNT; + sc->rl_ldata.rl_rx_desc_cnt = RL_8139_RX_DESC_CNT; + } + + error = re_allocmem(dev, sc); + if (error) + goto fail; + + ifp = sc->rl_ifp = if_alloc(IFT_ETHER); + if (ifp == NULL) { + device_printf(dev, "can not if_alloc()\n"); + error = ENOSPC; + goto fail; + } + + /* Take PHY out of power down mode. */ + if ((sc->rl_flags & RL_FLAG_PHYWAKE) != 0) { + re_gmii_writereg(dev, 1, 0x1f, 0); + re_gmii_writereg(dev, 1, 0x0e, 0); + } + + /* Do MII setup */ + if (mii_phy_probe(dev, &sc->rl_miibus, + re_ifmedia_upd, re_ifmedia_sts)) { + device_printf(dev, "MII without any phy!\n"); + error = ENXIO; + goto fail; + } + + ifp->if_softc = sc; + if_initname(ifp, device_get_name(dev), device_get_unit(dev)); + ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; + ifp->if_ioctl = re_ioctl; + ifp->if_start = re_start; + ifp->if_hwassist = RE_CSUM_FEATURES; + ifp->if_capabilities = IFCAP_HWCSUM; + ifp->if_capenable = ifp->if_capabilities; + ifp->if_init = re_init; + IFQ_SET_MAXLEN(&ifp->if_snd, RL_IFQ_MAXLEN); + ifp->if_snd.ifq_drv_maxlen = RL_IFQ_MAXLEN; + IFQ_SET_READY(&ifp->if_snd); + + TASK_INIT(&sc->rl_txtask, 1, re_tx_task, ifp); + TASK_INIT(&sc->rl_inttask, 0, re_int_task, sc); + + /* + * XXX + * Still have no idea how to make TSO work on 8168C, 8168CP, + * 8111C and 8111CP. + */ + if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) { + ifp->if_hwassist |= CSUM_TSO; + ifp->if_capabilities |= IFCAP_TSO4; + } + + /* + * Call MI attach routine. + */ + ether_ifattach(ifp, eaddr); + + /* VLAN capability setup */ + ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING; + if (ifp->if_capabilities & IFCAP_HWCSUM) + ifp->if_capabilities |= IFCAP_VLAN_HWCSUM; +#ifdef ENABLE_WOL + /* Enable WOL if PM is supported. */ + if (pci_find_extcap(sc->rl_dev, PCIY_PMG, ®) == 0) + ifp->if_capabilities |= IFCAP_WOL; +#endif + ifp->if_capenable = ifp->if_capabilities; + /* + * Don't enable TSO by default. Under certain + * circumtances the controller generated corrupted + * packets in TSO size. + */ + ifp->if_hwassist &= ~CSUM_TSO; + ifp->if_capenable &= ~IFCAP_TSO4; +#ifdef DEVICE_POLLING + ifp->if_capabilities |= IFCAP_POLLING; +#endif + /* + * Tell the upper layer(s) we support long frames. + * Must appear after the call to ether_ifattach() because + * ether_ifattach() sets ifi_hdrlen to the default value. + */ + ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header); + +#ifdef RE_DIAG + /* + * Perform hardware diagnostic on the original RTL8169. + * Some 32-bit cards were incorrectly wired and would + * malfunction if plugged into a 64-bit slot. + */ + + if (hwrev == RL_HWREV_8169) { + error = re_diag(sc); + if (error) { + device_printf(dev, + "attach aborted due to hardware diag failure\n"); + ether_ifdetach(ifp); + goto fail; + } + } +#endif + + /* Hook interrupt last to avoid having to lock softc */ + if ((sc->rl_flags & RL_FLAG_MSI) == 0) + error = bus_setup_intr(dev, sc->rl_irq[0], + INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc, + &sc->rl_intrhand[0]); + else { + for (i = 0; i < RL_MSI_MESSAGES; i++) { + error = bus_setup_intr(dev, sc->rl_irq[i], + INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc, + &sc->rl_intrhand[i]); + if (error != 0) + break; + } + } + if (error) { + device_printf(dev, "couldn't set up irq\n"); + ether_ifdetach(ifp); + } + +fail: + + if (error) + re_detach(dev); + + return (error); +} + +/* + * Shutdown hardware and free up resources. This can be called any + * time after the mutex has been initialized. It is called in both + * the error case in attach and the normal detach case so it needs + * to be careful about only freeing resources that have actually been + * allocated. + */ +static int +re_detach(device_t dev) +{ + struct rl_softc *sc; + struct ifnet *ifp; + int i, rid; + + sc = device_get_softc(dev); + ifp = sc->rl_ifp; + KASSERT(mtx_initialized(&sc->rl_mtx), ("re mutex not initialized")); + + /* These should only be active if attach succeeded */ + if (device_is_attached(dev)) { +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) + ether_poll_deregister(ifp); +#endif + RL_LOCK(sc); +#if 0 + sc->suspended = 1; +#endif + re_stop(sc); + RL_UNLOCK(sc); + callout_drain(&sc->rl_stat_callout); + taskqueue_drain(taskqueue_fast, &sc->rl_inttask); + taskqueue_drain(taskqueue_fast, &sc->rl_txtask); + /* + * Force off the IFF_UP flag here, in case someone + * still had a BPF descriptor attached to this + * interface. If they do, ether_ifdetach() will cause + * the BPF code to try and clear the promisc mode + * flag, which will bubble down to re_ioctl(), + * which will try to call re_init() again. This will + * turn the NIC back on and restart the MII ticker, + * which will panic the system when the kernel tries + * to invoke the re_tick() function that isn't there + * anymore. + */ + ifp->if_flags &= ~IFF_UP; + ether_ifdetach(ifp); + } + if (sc->rl_miibus) + device_delete_child(dev, sc->rl_miibus); + bus_generic_detach(dev); + + /* + * The rest is resource deallocation, so we should already be + * stopped here. + */ + + for (i = 0; i < RL_MSI_MESSAGES; i++) { + if (sc->rl_intrhand[i] != NULL) { + bus_teardown_intr(dev, sc->rl_irq[i], + sc->rl_intrhand[i]); + sc->rl_intrhand[i] = NULL; + } + } + if (ifp != NULL) + if_free(ifp); + if ((sc->rl_flags & RL_FLAG_MSI) == 0) { + if (sc->rl_irq[0] != NULL) { + bus_release_resource(dev, SYS_RES_IRQ, 0, + sc->rl_irq[0]); + sc->rl_irq[0] = NULL; + } + } else { + for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) { + if (sc->rl_irq[i] != NULL) { + bus_release_resource(dev, SYS_RES_IRQ, rid, + sc->rl_irq[i]); + sc->rl_irq[i] = NULL; + } + } + pci_release_msi(dev); + } + if (sc->rl_res) + bus_release_resource(dev, sc->rl_res_type, sc->rl_res_id, + sc->rl_res); + + /* Unload and free the RX DMA ring memory and map */ + + if (sc->rl_ldata.rl_rx_list_tag) { + bus_dmamap_unload(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map); + bus_dmamem_free(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list, + sc->rl_ldata.rl_rx_list_map); + bus_dma_tag_destroy(sc->rl_ldata.rl_rx_list_tag); + } + + /* Unload and free the TX DMA ring memory and map */ + + if (sc->rl_ldata.rl_tx_list_tag) { + bus_dmamap_unload(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list_map); + bus_dmamem_free(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list, + sc->rl_ldata.rl_tx_list_map); + bus_dma_tag_destroy(sc->rl_ldata.rl_tx_list_tag); + } + + /* Destroy all the RX and TX buffer maps */ + + if (sc->rl_ldata.rl_tx_mtag) { + for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) + bus_dmamap_destroy(sc->rl_ldata.rl_tx_mtag, + sc->rl_ldata.rl_tx_desc[i].tx_dmamap); + bus_dma_tag_destroy(sc->rl_ldata.rl_tx_mtag); + } + if (sc->rl_ldata.rl_rx_mtag) { + for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) + bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag, + sc->rl_ldata.rl_rx_desc[i].rx_dmamap); + if (sc->rl_ldata.rl_rx_sparemap) + bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag, + sc->rl_ldata.rl_rx_sparemap); + bus_dma_tag_destroy(sc->rl_ldata.rl_rx_mtag); + } + + /* Unload and free the stats buffer and map */ + + if (sc->rl_ldata.rl_stag) { + bus_dmamap_unload(sc->rl_ldata.rl_stag, + sc->rl_ldata.rl_rx_list_map); + bus_dmamem_free(sc->rl_ldata.rl_stag, + sc->rl_ldata.rl_stats, + sc->rl_ldata.rl_smap); + bus_dma_tag_destroy(sc->rl_ldata.rl_stag); + } + + if (sc->rl_parent_tag) + bus_dma_tag_destroy(sc->rl_parent_tag); + + mtx_destroy(&sc->rl_mtx); + + return (0); +} + +static __inline void +re_discard_rxbuf(struct rl_softc *sc, int idx) +{ + struct rl_desc *desc; + struct rl_rxdesc *rxd; + uint32_t cmdstat; + + rxd = &sc->rl_ldata.rl_rx_desc[idx]; + desc = &sc->rl_ldata.rl_rx_list[idx]; + desc->rl_vlanctl = 0; + cmdstat = rxd->rx_size; + if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1) + cmdstat |= RL_RDESC_CMD_EOR; + desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN); +} + +static int +re_newbuf(struct rl_softc *sc, int idx) +{ + struct mbuf *m; + struct rl_rxdesc *rxd; + bus_dma_segment_t segs[1]; + bus_dmamap_t map; + struct rl_desc *desc; + uint32_t cmdstat; + int error, nsegs; + + m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR); + if (m == NULL) + return (ENOBUFS); + + m->m_len = m->m_pkthdr.len = MCLBYTES; +#ifdef RE_FIXUP_RX + /* + * This is part of an evil trick to deal with non-x86 platforms. + * The RealTek chip requires RX buffers to be aligned on 64-bit + * boundaries, but that will hose non-x86 machines. To get around + * this, we leave some empty space at the start of each buffer + * and for non-x86 hosts, we copy the buffer back six bytes + * to achieve word alignment. This is slightly more efficient + * than allocating a new buffer, copying the contents, and + * discarding the old buffer. + */ + m_adj(m, RE_ETHER_ALIGN); +#endif + error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_rx_mtag, + sc->rl_ldata.rl_rx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT); + if (error != 0) { + m_freem(m); + return (ENOBUFS); + } + KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs)); + + rxd = &sc->rl_ldata.rl_rx_desc[idx]; + if (rxd->rx_m != NULL) { + bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap, + BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap); + } + + rxd->rx_m = m; + map = rxd->rx_dmamap; + rxd->rx_dmamap = sc->rl_ldata.rl_rx_sparemap; + rxd->rx_size = segs[0].ds_len; + sc->rl_ldata.rl_rx_sparemap = map; + bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap, + BUS_DMASYNC_PREREAD); + + desc = &sc->rl_ldata.rl_rx_list[idx]; + desc->rl_vlanctl = 0; + desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr)); + desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr)); + cmdstat = segs[0].ds_len; + if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1) + cmdstat |= RL_RDESC_CMD_EOR; + desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN); + + return (0); +} + +#ifdef RE_FIXUP_RX +static __inline void +re_fixup_rx(struct mbuf *m) +{ + int i; + uint16_t *src, *dst; + + src = mtod(m, uint16_t *); + dst = src - (RE_ETHER_ALIGN - ETHER_ALIGN) / sizeof *src; + + for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++) + *dst++ = *src++; + + m->m_data -= RE_ETHER_ALIGN - ETHER_ALIGN; +} +#endif + +static int +re_tx_list_init(struct rl_softc *sc) +{ + struct rl_desc *desc; + int i; + + RL_LOCK_ASSERT(sc); + + bzero(sc->rl_ldata.rl_tx_list, + sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc)); + for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) + sc->rl_ldata.rl_tx_desc[i].tx_m = NULL; + /* Set EOR. */ + desc = &sc->rl_ldata.rl_tx_list[sc->rl_ldata.rl_tx_desc_cnt - 1]; + desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOR); + + bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list_map, + BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); + + sc->rl_ldata.rl_tx_prodidx = 0; + sc->rl_ldata.rl_tx_considx = 0; + sc->rl_ldata.rl_tx_free = sc->rl_ldata.rl_tx_desc_cnt; + + return (0); +} + +static int +re_rx_list_init(struct rl_softc *sc) +{ + int error, i; + + bzero(sc->rl_ldata.rl_rx_list, + sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc)); + for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { + sc->rl_ldata.rl_rx_desc[i].rx_m = NULL; + if ((error = re_newbuf(sc, i)) != 0) + return (error); + } + + /* Flush the RX descriptors */ + + bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + sc->rl_ldata.rl_rx_prodidx = 0; + sc->rl_head = sc->rl_tail = NULL; + + return (0); +} + +/* + * RX handler for C+ and 8169. For the gigE chips, we support + * the reception of jumbo frames that have been fragmented + * across multiple 2K mbuf cluster buffers. + */ +static int +re_rxeof(struct rl_softc *sc) +{ + struct mbuf *m; + struct ifnet *ifp; + int i, total_len; + struct rl_desc *cur_rx; + u_int32_t rxstat, rxvlan; + int maxpkt = 16; + + RL_LOCK_ASSERT(sc); + + ifp = sc->rl_ifp; + + /* Invalidate the descriptor memory */ + + bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + + for (i = sc->rl_ldata.rl_rx_prodidx; maxpkt > 0; + i = RL_RX_DESC_NXT(sc, i)) { + cur_rx = &sc->rl_ldata.rl_rx_list[i]; + rxstat = le32toh(cur_rx->rl_cmdstat); + if ((rxstat & RL_RDESC_STAT_OWN) != 0) + break; + total_len = rxstat & sc->rl_rxlenmask; + rxvlan = le32toh(cur_rx->rl_vlanctl); + m = sc->rl_ldata.rl_rx_desc[i].rx_m; + + if (!(rxstat & RL_RDESC_STAT_EOF)) { + if (re_newbuf(sc, i) != 0) { + /* + * If this is part of a multi-fragment packet, + * discard all the pieces. + */ + if (sc->rl_head != NULL) { + m_freem(sc->rl_head); + sc->rl_head = sc->rl_tail = NULL; + } + re_discard_rxbuf(sc, i); + continue; + } + m->m_len = RE_RX_DESC_BUFLEN; + if (sc->rl_head == NULL) + sc->rl_head = sc->rl_tail = m; + else { + m->m_flags &= ~M_PKTHDR; + sc->rl_tail->m_next = m; + sc->rl_tail = m; + } + continue; + } + + /* + * NOTE: for the 8139C+, the frame length field + * is always 12 bits in size, but for the gigE chips, + * it is 13 bits (since the max RX frame length is 16K). + * Unfortunately, all 32 bits in the status word + * were already used, so to make room for the extra + * length bit, RealTek took out the 'frame alignment + * error' bit and shifted the other status bits + * over one slot. The OWN, EOR, FS and LS bits are + * still in the same places. We have already extracted + * the frame length and checked the OWN bit, so rather + * than using an alternate bit mapping, we shift the + * status bits one space to the right so we can evaluate + * them using the 8169 status as though it was in the + * same format as that of the 8139C+. + */ + if (sc->rl_type == RL_8169) + rxstat >>= 1; + + /* + * if total_len > 2^13-1, both _RXERRSUM and _GIANT will be + * set, but if CRC is clear, it will still be a valid frame. + */ + if (rxstat & RL_RDESC_STAT_RXERRSUM && !(total_len > 8191 && + (rxstat & RL_RDESC_STAT_ERRS) == RL_RDESC_STAT_GIANT)) { + ifp->if_ierrors++; + /* + * If this is part of a multi-fragment packet, + * discard all the pieces. + */ + if (sc->rl_head != NULL) { + m_freem(sc->rl_head); + sc->rl_head = sc->rl_tail = NULL; + } + re_discard_rxbuf(sc, i); + continue; + } + + /* + * If allocating a replacement mbuf fails, + * reload the current one. + */ + + if (re_newbuf(sc, i) != 0) { + ifp->if_iqdrops++; + if (sc->rl_head != NULL) { + m_freem(sc->rl_head); + sc->rl_head = sc->rl_tail = NULL; + } + re_discard_rxbuf(sc, i); + continue; + } + + if (sc->rl_head != NULL) { + m->m_len = total_len % RE_RX_DESC_BUFLEN; + if (m->m_len == 0) + m->m_len = RE_RX_DESC_BUFLEN; + /* + * Special case: if there's 4 bytes or less + * in this buffer, the mbuf can be discarded: + * the last 4 bytes is the CRC, which we don't + * care about anyway. + */ + if (m->m_len <= ETHER_CRC_LEN) { + sc->rl_tail->m_len -= + (ETHER_CRC_LEN - m->m_len); + m_freem(m); + } else { + m->m_len -= ETHER_CRC_LEN; + m->m_flags &= ~M_PKTHDR; + sc->rl_tail->m_next = m; + } + m = sc->rl_head; + sc->rl_head = sc->rl_tail = NULL; + m->m_pkthdr.len = total_len - ETHER_CRC_LEN; + } else + m->m_pkthdr.len = m->m_len = + (total_len - ETHER_CRC_LEN); + +#ifdef RE_FIXUP_RX + re_fixup_rx(m); +#endif + ifp->if_ipackets++; + m->m_pkthdr.rcvif = ifp; + + /* Do RX checksumming if enabled */ + + if (ifp->if_capenable & IFCAP_RXCSUM) { + if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) { + /* Check IP header checksum */ + if (rxstat & RL_RDESC_STAT_PROTOID) + m->m_pkthdr.csum_flags |= + CSUM_IP_CHECKED; + if (!(rxstat & RL_RDESC_STAT_IPSUMBAD)) + m->m_pkthdr.csum_flags |= + CSUM_IP_VALID; + + /* Check TCP/UDP checksum */ + if ((RL_TCPPKT(rxstat) && + !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) || + (RL_UDPPKT(rxstat) && + !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) { + m->m_pkthdr.csum_flags |= + CSUM_DATA_VALID|CSUM_PSEUDO_HDR; + m->m_pkthdr.csum_data = 0xffff; + } + } else { + /* + * RTL8168C/RTL816CP/RTL8111C/RTL8111CP + */ + if ((rxstat & RL_RDESC_STAT_PROTOID) && + (rxvlan & RL_RDESC_IPV4)) + m->m_pkthdr.csum_flags |= + CSUM_IP_CHECKED; + if (!(rxstat & RL_RDESC_STAT_IPSUMBAD) && + (rxvlan & RL_RDESC_IPV4)) + m->m_pkthdr.csum_flags |= + CSUM_IP_VALID; + if (((rxstat & RL_RDESC_STAT_TCP) && + !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) || + ((rxstat & RL_RDESC_STAT_UDP) && + !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) { + m->m_pkthdr.csum_flags |= + CSUM_DATA_VALID|CSUM_PSEUDO_HDR; + m->m_pkthdr.csum_data = 0xffff; + } + } + } + maxpkt--; + if (rxvlan & RL_RDESC_VLANCTL_TAG) { + m->m_pkthdr.ether_vtag = + bswap16((rxvlan & RL_RDESC_VLANCTL_DATA)); + m->m_flags |= M_VLANTAG; + } + RL_UNLOCK(sc); + (*ifp->if_input)(ifp, m); + RL_LOCK(sc); + } + + /* Flush the RX DMA ring */ + + bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag, + sc->rl_ldata.rl_rx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + sc->rl_ldata.rl_rx_prodidx = i; + + if (maxpkt) + return(EAGAIN); + + return(0); +} + +static void +re_txeof(struct rl_softc *sc) +{ + struct ifnet *ifp; + struct rl_txdesc *txd; + u_int32_t txstat; + int cons; + + cons = sc->rl_ldata.rl_tx_considx; + if (cons == sc->rl_ldata.rl_tx_prodidx) + return; + + ifp = sc->rl_ifp; + /* Invalidate the TX descriptor list */ + bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list_map, + BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); + + for (; cons != sc->rl_ldata.rl_tx_prodidx; + cons = RL_TX_DESC_NXT(sc, cons)) { + txstat = le32toh(sc->rl_ldata.rl_tx_list[cons].rl_cmdstat); + if (txstat & RL_TDESC_STAT_OWN) + break; + /* + * We only stash mbufs in the last descriptor + * in a fragment chain, which also happens to + * be the only place where the TX status bits + * are valid. + */ + if (txstat & RL_TDESC_CMD_EOF) { + txd = &sc->rl_ldata.rl_tx_desc[cons]; + bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, + txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, + txd->tx_dmamap); + KASSERT(txd->tx_m != NULL, + ("%s: freeing NULL mbufs!", __func__)); + m_freem(txd->tx_m); + txd->tx_m = NULL; + if (txstat & (RL_TDESC_STAT_EXCESSCOL| + RL_TDESC_STAT_COLCNT)) + ifp->if_collisions++; + if (txstat & RL_TDESC_STAT_TXERRSUM) + ifp->if_oerrors++; + else + ifp->if_opackets++; + } + sc->rl_ldata.rl_tx_free++; + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + } + sc->rl_ldata.rl_tx_considx = cons; + + /* No changes made to the TX ring, so no flush needed */ + + if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) { + /* + * Some chips will ignore a second TX request issued + * while an existing transmission is in progress. If + * the transmitter goes idle but there are still + * packets waiting to be sent, we need to restart the + * channel here to flush them out. This only seems to + * be required with the PCIe devices. + */ + CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); + +#ifdef RE_TX_MODERATION + /* + * If not all descriptors have been reaped yet, reload + * the timer so that we will eventually get another + * interrupt that will cause us to re-enter this routine. + * This is done in case the transmitter has gone idle. + */ + CSR_WRITE_4(sc, RL_TIMERCNT, 1); +#endif + } else + sc->rl_watchdog_timer = 0; +} + +static void +re_tick(void *xsc) +{ + struct rl_softc *sc; + struct mii_data *mii; + struct ifnet *ifp; + + sc = xsc; + ifp = sc->rl_ifp; + + RL_LOCK_ASSERT(sc); + + re_watchdog(sc); + + mii = device_get_softc(sc->rl_miibus); + mii_tick(mii); + if ((sc->rl_flags & RL_FLAG_LINK) != 0) { + if (!(mii->mii_media_status & IFM_ACTIVE)) + sc->rl_flags &= ~RL_FLAG_LINK; + } else { + if (mii->mii_media_status & IFM_ACTIVE && + IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { + sc->rl_flags |= RL_FLAG_LINK; + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue_fast(taskqueue_fast, + &sc->rl_txtask); + } + } + + callout_reset(&sc->rl_stat_callout, hz, re_tick, sc); +} + +#ifdef DEVICE_POLLING +static void +re_poll(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct rl_softc *sc = ifp->if_softc; + + RL_LOCK(sc); + if (ifp->if_drv_flags & IFF_DRV_RUNNING) + re_poll_locked(ifp, cmd, count); + RL_UNLOCK(sc); +} + +static void +re_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count) +{ + struct rl_softc *sc = ifp->if_softc; + + RL_LOCK_ASSERT(sc); + + sc->rxcycles = count; + re_rxeof(sc); + re_txeof(sc); + + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask); + + if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */ + u_int16_t status; + + status = CSR_READ_2(sc, RL_ISR); + if (status == 0xffff) + return; + if (status) + CSR_WRITE_2(sc, RL_ISR, status); + + /* + * XXX check behaviour on receiver stalls. + */ + + if (status & RL_ISR_SYSTEM_ERR) { + re_reset(sc); + re_init_locked(sc); + } + } +} +#endif /* DEVICE_POLLING */ + +static int +re_intr(void *arg) +{ + struct rl_softc *sc; + uint16_t status; + + sc = arg; + + status = CSR_READ_2(sc, RL_ISR); + if (status == 0xFFFF || (status & RL_INTRS_CPLUS) == 0) + return (FILTER_STRAY); + CSR_WRITE_2(sc, RL_IMR, 0); + + taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask); + + return (FILTER_HANDLED); +} + +static void +re_int_task(void *arg, int npending) +{ + struct rl_softc *sc; + struct ifnet *ifp; + u_int16_t status; + int rval = 0; + + sc = arg; + ifp = sc->rl_ifp; + + RL_LOCK(sc); + + status = CSR_READ_2(sc, RL_ISR); + CSR_WRITE_2(sc, RL_ISR, status); + + if (sc->suspended || + (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) { + RL_UNLOCK(sc); + return; + } + +#ifdef DEVICE_POLLING + if (ifp->if_capenable & IFCAP_POLLING) { + RL_UNLOCK(sc); + return; + } +#endif + + if (status & (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_FIFO_OFLOW)) + rval = re_rxeof(sc); + + if (status & ( +#ifdef RE_TX_MODERATION + RL_ISR_TIMEOUT_EXPIRED| +#else + RL_ISR_TX_OK| +#endif + RL_ISR_TX_ERR|RL_ISR_TX_DESC_UNAVAIL)) + re_txeof(sc); + + if (status & RL_ISR_SYSTEM_ERR) { + re_reset(sc); + re_init_locked(sc); + } + + if (status & RL_ISR_LINKCHG) { + callout_stop(&sc->rl_stat_callout); + re_tick(sc); + } + + if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) + taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_txtask); + + RL_UNLOCK(sc); + + if ((CSR_READ_2(sc, RL_ISR) & RL_INTRS_CPLUS) || rval) { + taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask); + return; + } + + CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); +} + +/* + * It's copy of ath_defrag(ath(4)). + * + * Defragment an mbuf chain, returning at most maxfrags separate + * mbufs+clusters. If this is not possible NULL is returned and + * the original mbuf chain is left in it's present (potentially + * modified) state. We use two techniques: collapsing consecutive + * mbufs and replacing consecutive mbufs by a cluster. + */ +static struct mbuf * +re_defrag(m0, how, maxfrags) + struct mbuf *m0; + int how; + int maxfrags; +{ + struct mbuf *m, *n, *n2, **prev; + u_int curfrags; + + /* + * Calculate the current number of frags. + */ + curfrags = 0; + for (m = m0; m != NULL; m = m->m_next) + curfrags++; + /* + * First, try to collapse mbufs. Note that we always collapse + * towards the front so we don't need to deal with moving the + * pkthdr. This may be suboptimal if the first mbuf has much + * less data than the following. + */ + m = m0; +again: + for (;;) { + n = m->m_next; + if (n == NULL) + break; + if ((m->m_flags & M_RDONLY) == 0 && + n->m_len < M_TRAILINGSPACE(m)) { + bcopy(mtod(n, void *), mtod(m, char *) + m->m_len, + n->m_len); + m->m_len += n->m_len; + m->m_next = n->m_next; + m_free(n); + if (--curfrags <= maxfrags) + return (m0); + } else + m = n; + } + KASSERT(maxfrags > 1, + ("maxfrags %u, but normal collapse failed", maxfrags)); + /* + * Collapse consecutive mbufs to a cluster. + */ + prev = &m0->m_next; /* NB: not the first mbuf */ + while ((n = *prev) != NULL) { + if ((n2 = n->m_next) != NULL && + n->m_len + n2->m_len < MCLBYTES) { + m = m_getcl(how, MT_DATA, 0); + if (m == NULL) + goto bad; + bcopy(mtod(n, void *), mtod(m, void *), n->m_len); + bcopy(mtod(n2, void *), mtod(m, char *) + n->m_len, + n2->m_len); + m->m_len = n->m_len + n2->m_len; + m->m_next = n2->m_next; + *prev = m; + m_free(n); + m_free(n2); + if (--curfrags <= maxfrags) /* +1 cl -2 mbufs */ + return m0; + /* + * Still not there, try the normal collapse + * again before we allocate another cluster. + */ + goto again; + } + prev = &n->m_next; + } + /* + * No place where we can collapse to a cluster; punt. + * This can occur if, for example, you request 2 frags + * but the packet requires that both be clusters (we + * never reallocate the first mbuf to avoid moving the + * packet header). + */ +bad: + return (NULL); +} + + + +static int +re_encap(struct rl_softc *sc, struct mbuf **m_head) +{ + struct rl_txdesc *txd, *txd_last; + bus_dma_segment_t segs[RL_NTXSEGS]; + bus_dmamap_t map; + struct mbuf *m_new; + struct rl_desc *desc; + int nsegs, prod; + int i, error, ei, si; + int padlen; + uint32_t cmdstat, csum_flags, vlanctl; + + RL_LOCK_ASSERT(sc); + M_ASSERTPKTHDR((*m_head)); + + /* + * With some of the RealTek chips, using the checksum offload + * support in conjunction with the autopadding feature results + * in the transmission of corrupt frames. For example, if we + * need to send a really small IP fragment that's less than 60 + * bytes in size, and IP header checksumming is enabled, the + * resulting ethernet frame that appears on the wire will + * have garbled payload. To work around this, if TX IP checksum + * offload is enabled, we always manually pad short frames out + * to the minimum ethernet frame size. + */ + if ((sc->rl_flags & RL_FLAG_DESCV2) == 0 && + (*m_head)->m_pkthdr.len < RL_IP4CSUMTX_PADLEN && + ((*m_head)->m_pkthdr.csum_flags & CSUM_IP) != 0) { + padlen = RL_MIN_FRAMELEN - (*m_head)->m_pkthdr.len; + if (M_WRITABLE(*m_head) == 0) { + /* Get a writable copy. */ + m_new = m_dup(*m_head, M_DONTWAIT); + m_freem(*m_head); + if (m_new == NULL) { + *m_head = NULL; + return (ENOBUFS); + } + *m_head = m_new; + } + if ((*m_head)->m_next != NULL || + M_TRAILINGSPACE(*m_head) < padlen) { + m_new = m_defrag(*m_head, M_DONTWAIT); + if (m_new == NULL) { + m_freem(*m_head); + *m_head = NULL; + return (ENOBUFS); + } + } else + m_new = *m_head; + + /* + * Manually pad short frames, and zero the pad space + * to avoid leaking data. + */ + bzero(mtod(m_new, char *) + m_new->m_pkthdr.len, padlen); + m_new->m_pkthdr.len += padlen; + m_new->m_len = m_new->m_pkthdr.len; + *m_head = m_new; + } + + prod = sc->rl_ldata.rl_tx_prodidx; + txd = &sc->rl_ldata.rl_tx_desc[prod]; + error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap, + *m_head, segs, &nsegs, BUS_DMA_NOWAIT); + if (error == EFBIG) { + m_new = re_defrag(*m_head, M_DONTWAIT, RL_NTXSEGS); + if (m_new == NULL) { + m_freem(*m_head); + *m_head = NULL; + return (ENOBUFS); + } + *m_head = m_new; + error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, + txd->tx_dmamap, *m_head, segs, &nsegs, BUS_DMA_NOWAIT); + if (error != 0) { + m_freem(*m_head); + *m_head = NULL; + return (error); + } + } else if (error != 0) + return (error); + if (nsegs == 0) { + m_freem(*m_head); + *m_head = NULL; + return (EIO); + } + + /* Check for number of available descriptors. */ + if (sc->rl_ldata.rl_tx_free - nsegs <= 1) { + bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap); + return (ENOBUFS); + } + + bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap, + BUS_DMASYNC_PREWRITE); + + /* + * Set up checksum offload. Note: checksum offload bits must + * appear in all descriptors of a multi-descriptor transmit + * attempt. This is according to testing done with an 8169 + * chip. This is a requirement. + */ + vlanctl = 0; + csum_flags = 0; + if (((*m_head)->m_pkthdr.csum_flags & CSUM_TSO) != 0) + csum_flags = RL_TDESC_CMD_LGSEND | + ((uint32_t)(*m_head)->m_pkthdr.tso_segsz << + RL_TDESC_CMD_MSSVAL_SHIFT); + else { + /* + * Unconditionally enable IP checksum if TCP or UDP + * checksum is required. Otherwise, TCP/UDP checksum + * does't make effects. + */ + if (((*m_head)->m_pkthdr.csum_flags & RE_CSUM_FEATURES) != 0) { + if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) { + csum_flags |= RL_TDESC_CMD_IPCSUM; + if (((*m_head)->m_pkthdr.csum_flags & + CSUM_TCP) != 0) + csum_flags |= RL_TDESC_CMD_TCPCSUM; + if (((*m_head)->m_pkthdr.csum_flags & + CSUM_UDP) != 0) + csum_flags |= RL_TDESC_CMD_UDPCSUM; + } else { + vlanctl |= RL_TDESC_CMD_IPCSUMV2; + if (((*m_head)->m_pkthdr.csum_flags & + CSUM_TCP) != 0) + vlanctl |= RL_TDESC_CMD_TCPCSUMV2; + if (((*m_head)->m_pkthdr.csum_flags & + CSUM_UDP) != 0) + vlanctl |= RL_TDESC_CMD_UDPCSUMV2; + } + } + } + + /* + * Set up hardware VLAN tagging. Note: vlan tag info must + * appear in all descriptors of a multi-descriptor + * transmission attempt. + */ + if ((*m_head)->m_flags & M_VLANTAG) + vlanctl |= bswap16((*m_head)->m_pkthdr.ether_vtag) | + RL_TDESC_VLANCTL_TAG; + + si = prod; + for (i = 0; i < nsegs; i++, prod = RL_TX_DESC_NXT(sc, prod)) { + desc = &sc->rl_ldata.rl_tx_list[prod]; + desc->rl_vlanctl = htole32(vlanctl); + desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[i].ds_addr)); + desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[i].ds_addr)); + cmdstat = segs[i].ds_len; + if (i != 0) + cmdstat |= RL_TDESC_CMD_OWN; + if (prod == sc->rl_ldata.rl_tx_desc_cnt - 1) + cmdstat |= RL_TDESC_CMD_EOR; + desc->rl_cmdstat = htole32(cmdstat | csum_flags); + sc->rl_ldata.rl_tx_free--; + } + /* Update producer index. */ + sc->rl_ldata.rl_tx_prodidx = prod; + + /* Set EOF on the last descriptor. */ + ei = RL_TX_DESC_PRV(sc, prod); + desc = &sc->rl_ldata.rl_tx_list[ei]; + desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOF); + + desc = &sc->rl_ldata.rl_tx_list[si]; + /* Set SOF and transfer ownership of packet to the chip. */ + desc->rl_cmdstat |= htole32(RL_TDESC_CMD_OWN | RL_TDESC_CMD_SOF); + + /* + * Insure that the map for this transmission + * is placed at the array index of the last descriptor + * in this chain. (Swap last and first dmamaps.) + */ + txd_last = &sc->rl_ldata.rl_tx_desc[ei]; + map = txd->tx_dmamap; + txd->tx_dmamap = txd_last->tx_dmamap; + txd_last->tx_dmamap = map; + txd_last->tx_m = *m_head; + + return (0); +} + +static void +re_tx_task(void *arg, int npending) +{ + struct ifnet *ifp; + + ifp = arg; + re_start(ifp); +} + +/* + * Main transmit routine for C+ and gigE NICs. + */ +static void +re_start(struct ifnet *ifp) +{ + struct rl_softc *sc; + struct mbuf *m_head; + int queued; + + sc = ifp->if_softc; + + RL_LOCK(sc); + + if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) != + IFF_DRV_RUNNING || (sc->rl_flags & RL_FLAG_LINK) == 0) { + RL_UNLOCK(sc); + return; + } + + for (queued = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) && + sc->rl_ldata.rl_tx_free > 1;) { + IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head); + if (m_head == NULL) + break; + + if (re_encap(sc, &m_head) != 0) { + if (m_head == NULL) + break; + IFQ_DRV_PREPEND(&ifp->if_snd, m_head); + ifp->if_drv_flags |= IFF_DRV_OACTIVE; + break; + } + + /* + * If there's a BPF listener, bounce a copy of this frame + * to him. + */ + ETHER_BPF_MTAP(ifp, m_head); + + queued++; + } + + if (queued == 0) { +#ifdef RE_TX_MODERATION + if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) + CSR_WRITE_4(sc, RL_TIMERCNT, 1); +#endif + RL_UNLOCK(sc); + return; + } + + /* Flush the TX descriptors */ + + bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag, + sc->rl_ldata.rl_tx_list_map, + BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD); + + CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START); + +#ifdef RE_TX_MODERATION + /* + * Use the countdown timer for interrupt moderation. + * 'TX done' interrupts are disabled. Instead, we reset the + * countdown timer, which will begin counting until it hits + * the value in the TIMERINT register, and then trigger an + * interrupt. Each time we write to the TIMERCNT register, + * the timer count is reset to 0. + */ + CSR_WRITE_4(sc, RL_TIMERCNT, 1); +#endif + + /* + * Set a timeout in case the chip goes out to lunch. + */ + sc->rl_watchdog_timer = 5; + + RL_UNLOCK(sc); +} + +static void +re_init(void *xsc) +{ + struct rl_softc *sc = xsc; + + RL_LOCK(sc); + re_init_locked(sc); + RL_UNLOCK(sc); +} + +static void +re_init_locked(struct rl_softc *sc) +{ + struct ifnet *ifp = sc->rl_ifp; + struct mii_data *mii; + u_int32_t rxcfg = 0; + uint16_t cfg; + union { + uint32_t align_dummy; + u_char eaddr[ETHER_ADDR_LEN]; + } eaddr; + + RL_LOCK_ASSERT(sc); + + mii = device_get_softc(sc->rl_miibus); + + /* + * Cancel pending I/O and free all RX/TX buffers. + */ + re_stop(sc); + + /* + * Enable C+ RX and TX mode, as well as VLAN stripping and + * RX checksum offload. We must configure the C+ register + * before all others. + */ + cfg = RL_CPLUSCMD_PCI_MRW; + if ((ifp->if_capenable & IFCAP_RXCSUM) != 0) + cfg |= RL_CPLUSCMD_RXCSUM_ENB; + if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0) + cfg |= RL_CPLUSCMD_VLANSTRIP; + if ((sc->rl_flags & RL_FLAG_MACSTAT) != 0) { + cfg |= RL_CPLUSCMD_MACSTAT_DIS; + /* XXX magic. */ + cfg |= 0x0001; + } else + cfg |= RL_CPLUSCMD_RXENB | RL_CPLUSCMD_TXENB; + CSR_WRITE_2(sc, RL_CPLUS_CMD, cfg); + /* + * Disable TSO if interface MTU size is greater than MSS + * allowed in controller. + */ + if (ifp->if_mtu > RL_TSO_MTU && (ifp->if_capenable & IFCAP_TSO4) != 0) { + ifp->if_capenable &= ~IFCAP_TSO4; + ifp->if_hwassist &= ~CSUM_TSO; + } + + /* + * Init our MAC address. Even though the chipset + * documentation doesn't mention it, we need to enter "Config + * register write enable" mode to modify the ID registers. + */ + /* Copy MAC address on stack to align. */ + bcopy(IF_LLADDR(ifp), eaddr.eaddr, ETHER_ADDR_LEN); + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG); + CSR_WRITE_4(sc, RL_IDR0, + htole32(*(u_int32_t *)(&eaddr.eaddr[0]))); + CSR_WRITE_4(sc, RL_IDR4, + htole32(*(u_int32_t *)(&eaddr.eaddr[4]))); + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + + /* + * For C+ mode, initialize the RX descriptors and mbufs. + */ + re_rx_list_init(sc); + re_tx_list_init(sc); + + /* + * Load the addresses of the RX and TX lists into the chip. + */ + + CSR_WRITE_4(sc, RL_RXLIST_ADDR_HI, + RL_ADDR_HI(sc->rl_ldata.rl_rx_list_addr)); + CSR_WRITE_4(sc, RL_RXLIST_ADDR_LO, + RL_ADDR_LO(sc->rl_ldata.rl_rx_list_addr)); + + CSR_WRITE_4(sc, RL_TXLIST_ADDR_HI, + RL_ADDR_HI(sc->rl_ldata.rl_tx_list_addr)); + CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO, + RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr)); + + /* + * Enable transmit and receive. + */ + CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); + + /* + * Set the initial TX and RX configuration. + */ + if (sc->rl_testmode) { + if (sc->rl_type == RL_8169) + CSR_WRITE_4(sc, RL_TXCFG, + RL_TXCFG_CONFIG|RL_LOOPTEST_ON); + else + CSR_WRITE_4(sc, RL_TXCFG, + RL_TXCFG_CONFIG|RL_LOOPTEST_ON_CPLUS); + } else + CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG); + + CSR_WRITE_1(sc, RL_EARLY_TX_THRESH, 16); + + CSR_WRITE_4(sc, RL_RXCFG, RL_RXCFG_CONFIG); + + /* Set the individual bit to receive frames for this host only. */ + rxcfg = CSR_READ_4(sc, RL_RXCFG); + rxcfg |= RL_RXCFG_RX_INDIV; + + /* If we want promiscuous mode, set the allframes bit. */ + if (ifp->if_flags & IFF_PROMISC) + rxcfg |= RL_RXCFG_RX_ALLPHYS; + else + rxcfg &= ~RL_RXCFG_RX_ALLPHYS; + CSR_WRITE_4(sc, RL_RXCFG, rxcfg); + + /* + * Set capture broadcast bit to capture broadcast frames. + */ + if (ifp->if_flags & IFF_BROADCAST) + rxcfg |= RL_RXCFG_RX_BROAD; + else + rxcfg &= ~RL_RXCFG_RX_BROAD; + CSR_WRITE_4(sc, RL_RXCFG, rxcfg); + + /* + * Program the multicast filter, if necessary. + */ + re_setmulti(sc); + +#ifdef DEVICE_POLLING + /* + * Disable interrupts if we are polling. + */ + if (ifp->if_capenable & IFCAP_POLLING) + CSR_WRITE_2(sc, RL_IMR, 0); + else /* otherwise ... */ +#endif + + /* + * Enable interrupts. + */ + if (sc->rl_testmode) + CSR_WRITE_2(sc, RL_IMR, 0); + else + CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); + CSR_WRITE_2(sc, RL_ISR, RL_INTRS_CPLUS); + + /* Set initial TX threshold */ + sc->rl_txthresh = RL_TX_THRESH_INIT; + + /* Start RX/TX process. */ + CSR_WRITE_4(sc, RL_MISSEDPKT, 0); +#ifdef notdef + /* Enable receiver and transmitter. */ + CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB); +#endif + +#ifdef RE_TX_MODERATION + /* + * Initialize the timer interrupt register so that + * a timer interrupt will be generated once the timer + * reaches a certain number of ticks. The timer is + * reloaded on each transmit. This gives us TX interrupt + * moderation, which dramatically improves TX frame rate. + */ + if (sc->rl_type == RL_8169) + CSR_WRITE_4(sc, RL_TIMERINT_8169, 0x800); + else + CSR_WRITE_4(sc, RL_TIMERINT, 0x400); +#endif + + /* + * For 8169 gigE NICs, set the max allowed RX packet + * size so we can receive jumbo frames. + */ + if (sc->rl_type == RL_8169) + CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383); + + if (sc->rl_testmode) + return; + + mii_mediachg(mii); + + CSR_WRITE_1(sc, RL_CFG1, CSR_READ_1(sc, RL_CFG1) | RL_CFG1_DRVLOAD); + + ifp->if_drv_flags |= IFF_DRV_RUNNING; + ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; + + sc->rl_flags &= ~RL_FLAG_LINK; + sc->rl_watchdog_timer = 0; + callout_reset(&sc->rl_stat_callout, hz, re_tick, sc); +} + +/* + * Set media options. + */ +static int +re_ifmedia_upd(struct ifnet *ifp) +{ + struct rl_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + mii = device_get_softc(sc->rl_miibus); + RL_LOCK(sc); + mii_mediachg(mii); + RL_UNLOCK(sc); + + return (0); +} + +/* + * Report current media status. + */ +static void +re_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) +{ + struct rl_softc *sc; + struct mii_data *mii; + + sc = ifp->if_softc; + mii = device_get_softc(sc->rl_miibus); + + RL_LOCK(sc); + mii_pollstat(mii); + RL_UNLOCK(sc); + ifmr->ifm_active = mii->mii_media_active; + ifmr->ifm_status = mii->mii_media_status; +} + +static int +re_ioctl(struct ifnet *ifp, u_long command, caddr_t data) +{ + struct rl_softc *sc = ifp->if_softc; + struct ifreq *ifr = (struct ifreq *) data; + struct mii_data *mii; + int error = 0; + + switch (command) { + case SIOCSIFMTU: + if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > RL_JUMBO_MTU) { + error = EINVAL; + break; + } + if ((sc->rl_flags & RL_FLAG_NOJUMBO) != 0 && + ifr->ifr_mtu > RL_MAX_FRAMELEN) { + error = EINVAL; + break; + } + RL_LOCK(sc); + if (ifp->if_mtu != ifr->ifr_mtu) + ifp->if_mtu = ifr->ifr_mtu; + if (ifp->if_mtu > RL_TSO_MTU && + (ifp->if_capenable & IFCAP_TSO4) != 0) { + ifp->if_capenable &= ~IFCAP_TSO4; + ifp->if_hwassist &= ~CSUM_TSO; + } + RL_UNLOCK(sc); + break; + case SIOCSIFFLAGS: + RL_LOCK(sc); + if ((ifp->if_flags & IFF_UP) != 0) { + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) { + if (((ifp->if_flags ^ sc->rl_if_flags) + & (IFF_PROMISC | IFF_ALLMULTI)) != 0) + re_setmulti(sc); + } else + re_init_locked(sc); + } else { + if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) + re_stop(sc); + } + sc->rl_if_flags = ifp->if_flags; + RL_UNLOCK(sc); + break; + case SIOCADDMULTI: + case SIOCDELMULTI: + RL_LOCK(sc); + re_setmulti(sc); + RL_UNLOCK(sc); + break; + case SIOCGIFMEDIA: + case SIOCSIFMEDIA: + mii = device_get_softc(sc->rl_miibus); + error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); + break; + case SIOCSIFCAP: + { + int mask, reinit; + + mask = ifr->ifr_reqcap ^ ifp->if_capenable; + reinit = 0; +#ifdef DEVICE_POLLING + if (mask & IFCAP_POLLING) { + if (ifr->ifr_reqcap & IFCAP_POLLING) { + error = ether_poll_register(re_poll, ifp); + if (error) + return(error); + RL_LOCK(sc); + /* Disable interrupts */ + CSR_WRITE_2(sc, RL_IMR, 0x0000); + ifp->if_capenable |= IFCAP_POLLING; + RL_UNLOCK(sc); + } else { + error = ether_poll_deregister(ifp); + /* Enable interrupts. */ + RL_LOCK(sc); + CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS); + ifp->if_capenable &= ~IFCAP_POLLING; + RL_UNLOCK(sc); + } + } +#endif /* DEVICE_POLLING */ + if (mask & IFCAP_HWCSUM) { + ifp->if_capenable ^= IFCAP_HWCSUM; + if (ifp->if_capenable & IFCAP_TXCSUM) + ifp->if_hwassist |= RE_CSUM_FEATURES; + else + ifp->if_hwassist &= ~RE_CSUM_FEATURES; + reinit = 1; + } + if (mask & IFCAP_VLAN_HWTAGGING) { + ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING; + reinit = 1; + } + if (mask & IFCAP_TSO4) { + ifp->if_capenable ^= IFCAP_TSO4; + if ((IFCAP_TSO4 & ifp->if_capenable) && + (IFCAP_TSO4 & ifp->if_capabilities)) + ifp->if_hwassist |= CSUM_TSO; + else + ifp->if_hwassist &= ~CSUM_TSO; + if (ifp->if_mtu > RL_TSO_MTU && + (ifp->if_capenable & IFCAP_TSO4) != 0) { + ifp->if_capenable &= ~IFCAP_TSO4; + ifp->if_hwassist &= ~CSUM_TSO; + } + } +#ifdef ENABLE_WOL + if ((mask & IFCAP_WOL) != 0 && + (ifp->if_capabilities & IFCAP_WOL) != 0) { + if ((mask & IFCAP_WOL_UCAST) != 0) + ifp->if_capenable ^= IFCAP_WOL_UCAST; + if ((mask & IFCAP_WOL_MCAST) != 0) + ifp->if_capenable ^= IFCAP_WOL_MCAST; + if ((mask & IFCAP_WOL_MAGIC) != 0) + ifp->if_capenable ^= IFCAP_WOL_MAGIC; + } +#endif + if (reinit && ifp->if_drv_flags & IFF_DRV_RUNNING) + re_init(sc); + VLAN_CAPABILITIES(ifp); + } + break; + default: + error = ether_ioctl(ifp, command, data); + break; + } + + return (error); +} + +static void +re_watchdog(struct rl_softc *sc) +{ + + RL_LOCK_ASSERT(sc); + + if (sc->rl_watchdog_timer == 0 || --sc->rl_watchdog_timer != 0) + return; + + device_printf(sc->rl_dev, "watchdog timeout\n"); + sc->rl_ifp->if_oerrors++; + + re_txeof(sc); + re_rxeof(sc); + re_init_locked(sc); +} + +/* + * Stop the adapter and free any mbufs allocated to the + * RX and TX lists. + */ +static void +re_stop(struct rl_softc *sc) +{ + int i; + struct ifnet *ifp; + struct rl_txdesc *txd; + struct rl_rxdesc *rxd; + + RL_LOCK_ASSERT(sc); + + ifp = sc->rl_ifp; + + sc->rl_watchdog_timer = 0; + callout_stop(&sc->rl_stat_callout); + ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); + + CSR_WRITE_1(sc, RL_COMMAND, 0x00); + CSR_WRITE_2(sc, RL_IMR, 0x0000); + CSR_WRITE_2(sc, RL_ISR, 0xFFFF); + + if (sc->rl_head != NULL) { + m_freem(sc->rl_head); + sc->rl_head = sc->rl_tail = NULL; + } + + /* Free the TX list buffers. */ + + for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) { + txd = &sc->rl_ldata.rl_tx_desc[i]; + if (txd->tx_m != NULL) { + bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, + txd->tx_dmamap, BUS_DMASYNC_POSTWRITE); + bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, + txd->tx_dmamap); + m_freem(txd->tx_m); + txd->tx_m = NULL; + } + } + + /* Free the RX list buffers. */ + + for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) { + rxd = &sc->rl_ldata.rl_rx_desc[i]; + if (rxd->rx_m != NULL) { + bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, + rxd->rx_dmamap, BUS_DMASYNC_POSTREAD); + bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, + rxd->rx_dmamap); + m_freem(rxd->rx_m); + rxd->rx_m = NULL; + } + } +} + +/* + * Device suspend routine. Stop the interface and save some PCI + * settings in case the BIOS doesn't restore them properly on + * resume. + */ +static int +re_suspend(device_t dev) +{ + struct rl_softc *sc; + + sc = device_get_softc(dev); + + RL_LOCK(sc); + re_stop(sc); + re_setwol(sc); + sc->suspended = 1; + RL_UNLOCK(sc); + + return (0); +} + +/* + * Device resume routine. Restore some PCI settings in case the BIOS + * doesn't, re-enable busmastering, and restart the interface if + * appropriate. + */ +static int +re_resume(device_t dev) +{ + struct rl_softc *sc; + struct ifnet *ifp; + + sc = device_get_softc(dev); + + RL_LOCK(sc); + + ifp = sc->rl_ifp; + + /* reinitialize interface if necessary */ + if (ifp->if_flags & IFF_UP) + re_init_locked(sc); + + /* + * Clear WOL matching such that normal Rx filtering + * wouldn't interfere with WOL patterns. + */ + re_clrwol(sc); + sc->suspended = 0; + RL_UNLOCK(sc); + + return (0); +} + +/* + * Stop all chip I/O so that the kernel's probe routines don't + * get confused by errant DMAs when rebooting. + */ +static int +re_shutdown(device_t dev) +{ + struct rl_softc *sc; + + sc = device_get_softc(dev); + + RL_LOCK(sc); + re_stop(sc); + /* + * Mark interface as down since otherwise we will panic if + * interrupt comes in later on, which can happen in some + * cases. + */ + sc->rl_ifp->if_flags &= ~IFF_UP; + re_setwol(sc); + RL_UNLOCK(sc); + + return (0); +} + +static void +re_setwol(struct rl_softc *sc) +{ +#ifdef ENABLE_WOL + struct ifnet *ifp; + int pmc; + uint16_t pmstat; + uint8_t v; + + RL_LOCK_ASSERT(sc); + + if (pci_find_extcap(sc->rl_dev, PCIY_PMG, &pmc) != 0) + return; + + ifp = sc->rl_ifp; + /* Enable config register write. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); + + /* Enable PME. */ + v = CSR_READ_1(sc, RL_CFG1); + v &= ~RL_CFG1_PME; + if ((ifp->if_capenable & IFCAP_WOL) != 0) + v |= RL_CFG1_PME; + CSR_WRITE_1(sc, RL_CFG1, v); + + v = CSR_READ_1(sc, RL_CFG3); + v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC); + if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0) + v |= RL_CFG3_WOL_MAGIC; + CSR_WRITE_1(sc, RL_CFG3, v); + + /* Config register write done. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + + v = CSR_READ_1(sc, RL_CFG5); + v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST); + v &= ~RL_CFG5_WOL_LANWAKE; + if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0) + v |= RL_CFG5_WOL_UCAST; + if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0) + v |= RL_CFG5_WOL_MCAST | RL_CFG5_WOL_BCAST; + if ((ifp->if_capenable & IFCAP_WOL) != 0) + v |= RL_CFG5_WOL_LANWAKE; + CSR_WRITE_1(sc, RL_CFG5, v); + + /* + * It seems that hardware resets its link speed to 100Mbps in + * power down mode so switching to 100Mbps in driver is not + * needed. + */ + + /* Request PME if WOL is requested. */ + pmstat = pci_read_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, 2); + pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE); + if ((ifp->if_capenable & IFCAP_WOL) != 0) + pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE; + pci_write_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, pmstat, 2); +#endif +} + +static void +re_clrwol(struct rl_softc *sc) +{ +#ifdef ENABLE_WOL + int pmc; + uint8_t v; + + RL_LOCK_ASSERT(sc); + + if (pci_find_extcap(sc->rl_dev, PCIY_PMG, &pmc) != 0) + return; + + /* Enable config register write. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE); + + v = CSR_READ_1(sc, RL_CFG3); + v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC); + CSR_WRITE_1(sc, RL_CFG3, v); + + /* Config register write done. */ + CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF); + + v = CSR_READ_1(sc, RL_CFG5); + v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST); + v &= ~RL_CFG5_WOL_LANWAKE; + CSR_WRITE_1(sc, RL_CFG5, v); +#endif +} + diff --git a/src/add-ons/kernel/drivers/network/re/pci/if_rlreg.h b/src/add-ons/kernel/drivers/network/re/pci/if_rlreg.h new file mode 100644 index 0000000000..bdf92fc7ea --- /dev/null +++ b/src/add-ons/kernel/drivers/network/re/pci/if_rlreg.h @@ -0,0 +1,1100 @@ +/*- + * Copyright (c) 1997, 1998-2003 + * Bill Paul . All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. All advertising materials mentioning features or use of this software + * must display the following acknowledgement: + * This product includes software developed by Bill Paul. + * 4. Neither the name of the author nor the names of any co-contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD + * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGE. + * + * $FreeBSD: src/sys/pci/if_rlreg.h,v 1.67.2.14 2008/08/09 02:07:30 yongari Exp $ + */ + +/* + * RealTek 8129/8139 register offsets + */ +#define RL_IDR0 0x0000 /* ID register 0 (station addr) */ +#define RL_IDR1 0x0001 /* Must use 32-bit accesses (?) */ +#define RL_IDR2 0x0002 +#define RL_IDR3 0x0003 +#define RL_IDR4 0x0004 +#define RL_IDR5 0x0005 + /* 0006-0007 reserved */ +#define RL_MAR0 0x0008 /* Multicast hash table */ +#define RL_MAR1 0x0009 +#define RL_MAR2 0x000A +#define RL_MAR3 0x000B +#define RL_MAR4 0x000C +#define RL_MAR5 0x000D +#define RL_MAR6 0x000E +#define RL_MAR7 0x000F + +#define RL_TXSTAT0 0x0010 /* status of TX descriptor 0 */ +#define RL_TXSTAT1 0x0014 /* status of TX descriptor 1 */ +#define RL_TXSTAT2 0x0018 /* status of TX descriptor 2 */ +#define RL_TXSTAT3 0x001C /* status of TX descriptor 3 */ + +#define RL_TXADDR0 0x0020 /* address of TX descriptor 0 */ +#define RL_TXADDR1 0x0024 /* address of TX descriptor 1 */ +#define RL_TXADDR2 0x0028 /* address of TX descriptor 2 */ +#define RL_TXADDR3 0x002C /* address of TX descriptor 3 */ + +#define RL_RXADDR 0x0030 /* RX ring start address */ +#define RL_RX_EARLY_BYTES 0x0034 /* RX early byte count */ +#define RL_RX_EARLY_STAT 0x0036 /* RX early status */ +#define RL_COMMAND 0x0037 /* command register */ +#define RL_CURRXADDR 0x0038 /* current address of packet read */ +#define RL_CURRXBUF 0x003A /* current RX buffer address */ +#define RL_IMR 0x003C /* interrupt mask register */ +#define RL_ISR 0x003E /* interrupt status register */ +#define RL_TXCFG 0x0040 /* transmit config */ +#define RL_RXCFG 0x0044 /* receive config */ +#define RL_TIMERCNT 0x0048 /* timer count register */ +#define RL_MISSEDPKT 0x004C /* missed packet counter */ +#define RL_EECMD 0x0050 /* EEPROM command register */ +#define RL_CFG0 0x0051 /* config register #0 */ +#define RL_CFG1 0x0052 /* config register #1 */ +#define RL_CFG2 0x0053 /* config register #2 */ +#define RL_CFG3 0x0054 /* config register #3 */ +#define RL_CFG4 0x0055 /* config register #4 */ +#define RL_CFG5 0x0056 /* config register #5 */ + /* 0057 reserved */ +#define RL_MEDIASTAT 0x0058 /* media status register (8139) */ + /* 0059-005A reserved */ +#define RL_MII 0x005A /* 8129 chip only */ +#define RL_HALTCLK 0x005B +#define RL_MULTIINTR 0x005C /* multiple interrupt */ +#define RL_PCIREV 0x005E /* PCI revision value */ + /* 005F reserved */ +#define RL_TXSTAT_ALL 0x0060 /* TX status of all descriptors */ + +/* Direct PHY access registers only available on 8139 */ +#define RL_BMCR 0x0062 /* PHY basic mode control */ +#define RL_BMSR 0x0064 /* PHY basic mode status */ +#define RL_ANAR 0x0066 /* PHY autoneg advert */ +#define RL_LPAR 0x0068 /* PHY link partner ability */ +#define RL_ANER 0x006A /* PHY autoneg expansion */ + +#define RL_DISCCNT 0x006C /* disconnect counter */ +#define RL_FALSECAR 0x006E /* false carrier counter */ +#define RL_NWAYTST 0x0070 /* NWAY test register */ +#define RL_RX_ER 0x0072 /* RX_ER counter */ +#define RL_CSCFG 0x0074 /* CS configuration register */ + +/* + * When operating in special C+ mode, some of the registers in an + * 8139C+ chip have different definitions. These are also used for + * the 8169 gigE chip. + */ +#define RL_DUMPSTATS_LO 0x0010 /* counter dump command register */ +#define RL_DUMPSTATS_HI 0x0014 /* counter dump command register */ +#define RL_TXLIST_ADDR_LO 0x0020 /* 64 bits, 256 byte alignment */ +#define RL_TXLIST_ADDR_HI 0x0024 /* 64 bits, 256 byte alignment */ +#define RL_TXLIST_ADDR_HPRIO_LO 0x0028 /* 64 bits, 256 byte alignment */ +#define RL_TXLIST_ADDR_HPRIO_HI 0x002C /* 64 bits, 256 byte alignment */ +#define RL_CFG2 0x0053 +#define RL_TIMERINT 0x0054 /* interrupt on timer expire */ +#define RL_TXSTART 0x00D9 /* 8 bits */ +#define RL_CPLUS_CMD 0x00E0 /* 16 bits */ +#define RL_RXLIST_ADDR_LO 0x00E4 /* 64 bits, 256 byte alignment */ +#define RL_RXLIST_ADDR_HI 0x00E8 /* 64 bits, 256 byte alignment */ +#define RL_EARLY_TX_THRESH 0x00EC /* 8 bits */ + +/* + * Registers specific to the 8169 gigE chip + */ +#define RL_TIMERINT_8169 0x0058 /* different offset than 8139 */ +#define RL_PHYAR 0x0060 +#define RL_TBICSR 0x0064 +#define RL_TBI_ANAR 0x0068 +#define RL_TBI_LPAR 0x006A +#define RL_GMEDIASTAT 0x006C /* 8 bits */ +#define RL_MAXRXPKTLEN 0x00DA /* 16 bits, chip multiplies by 8 */ +#define RL_GTXSTART 0x0038 /* 8 bits */ + +/* + * TX config register bits + */ +#define RL_TXCFG_CLRABRT 0x00000001 /* retransmit aborted pkt */ +#define RL_TXCFG_MAXDMA 0x00000700 /* max DMA burst size */ +#define RL_TXCFG_CRCAPPEND 0x00010000 /* CRC append (0 = yes) */ +#define RL_TXCFG_LOOPBKTST 0x00060000 /* loopback test */ +#define RL_TXCFG_IFG2 0x00080000 /* 8169 only */ +#define RL_TXCFG_IFG 0x03000000 /* interframe gap */ +#define RL_TXCFG_HWREV 0x7CC00000 + +#define RL_LOOPTEST_OFF 0x00000000 +#define RL_LOOPTEST_ON 0x00020000 +#define RL_LOOPTEST_ON_CPLUS 0x00060000 + +/* Known revision codes. */ + +#define RL_HWREV_8169 0x00000000 +#define RL_HWREV_8110S 0x00800000 +#define RL_HWREV_8169S 0x04000000 +#define RL_HWREV_8169_8110SB 0x10000000 +#define RL_HWREV_8169_8110SC 0x18000000 +#define RL_HWREV_8102EL 0x24800000 +#define RL_HWREV_8168_SPIN1 0x30000000 +#define RL_HWREV_8100E 0x30800000 +#define RL_HWREV_8101E 0x34000000 +#define RL_HWREV_8102E 0x34800000 +#define RL_HWREV_8168_SPIN2 0x38000000 +#define RL_HWREV_8168_SPIN3 0x38400000 +#define RL_HWREV_8168C 0x3C000000 +#define RL_HWREV_8168C_SPIN2 0x3C400000 +#define RL_HWREV_8168CP 0x3C800000 +#define RL_HWREV_8139 0x60000000 +#define RL_HWREV_8139A 0x70000000 +#define RL_HWREV_8139AG 0x70800000 +#define RL_HWREV_8139B 0x78000000 +#define RL_HWREV_8130 0x7C000000 +#define RL_HWREV_8139C 0x74000000 +#define RL_HWREV_8139D 0x74400000 +#define RL_HWREV_8139CPLUS 0x74800000 +#define RL_HWREV_8101 0x74c00000 +#define RL_HWREV_8100 0x78800000 +#define RL_HWREV_8169_8110SBL 0x7CC00000 + +#define RL_TXDMA_16BYTES 0x00000000 +#define RL_TXDMA_32BYTES 0x00000100 +#define RL_TXDMA_64BYTES 0x00000200 +#define RL_TXDMA_128BYTES 0x00000300 +#define RL_TXDMA_256BYTES 0x00000400 +#define RL_TXDMA_512BYTES 0x00000500 +#define RL_TXDMA_1024BYTES 0x00000600 +#define RL_TXDMA_2048BYTES 0x00000700 + +/* + * Transmit descriptor status register bits. + */ +#define RL_TXSTAT_LENMASK 0x00001FFF +#define RL_TXSTAT_OWN 0x00002000 +#define RL_TXSTAT_TX_UNDERRUN 0x00004000 +#define RL_TXSTAT_TX_OK 0x00008000 +#define RL_TXSTAT_EARLY_THRESH 0x003F0000 +#define RL_TXSTAT_COLLCNT 0x0F000000 +#define RL_TXSTAT_CARR_HBEAT 0x10000000 +#define RL_TXSTAT_OUTOFWIN 0x20000000 +#define RL_TXSTAT_TXABRT 0x40000000 +#define RL_TXSTAT_CARRLOSS 0x80000000 + +/* + * Interrupt status register bits. + */ +#define RL_ISR_RX_OK 0x0001 +#define RL_ISR_RX_ERR 0x0002 +#define RL_ISR_TX_OK 0x0004 +#define RL_ISR_TX_ERR 0x0008 +#define RL_ISR_RX_OVERRUN 0x0010 +#define RL_ISR_PKT_UNDERRUN 0x0020 +#define RL_ISR_LINKCHG 0x0020 /* 8169 only */ +#define RL_ISR_FIFO_OFLOW 0x0040 /* 8139 only */ +#define RL_ISR_TX_DESC_UNAVAIL 0x0080 /* C+ only */ +#define RL_ISR_SWI 0x0100 /* C+ only */ +#define RL_ISR_CABLE_LEN_CHGD 0x2000 +#define RL_ISR_PCS_TIMEOUT 0x4000 /* 8129 only */ +#define RL_ISR_TIMEOUT_EXPIRED 0x4000 +#define RL_ISR_SYSTEM_ERR 0x8000 + +#define RL_INTRS \ + (RL_ISR_TX_OK|RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_TX_ERR| \ + RL_ISR_RX_OVERRUN|RL_ISR_PKT_UNDERRUN|RL_ISR_FIFO_OFLOW| \ + RL_ISR_PCS_TIMEOUT|RL_ISR_SYSTEM_ERR) + +#ifdef RE_TX_MODERATION +#define RL_INTRS_CPLUS \ + (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_TX_ERR| \ + RL_ISR_RX_OVERRUN|RL_ISR_PKT_UNDERRUN|RL_ISR_FIFO_OFLOW| \ + RL_ISR_PCS_TIMEOUT|RL_ISR_SYSTEM_ERR|RL_ISR_TIMEOUT_EXPIRED) +#else +#define RL_INTRS_CPLUS \ + (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_TX_ERR|RL_ISR_TX_OK| \ + RL_ISR_RX_OVERRUN|RL_ISR_PKT_UNDERRUN|RL_ISR_FIFO_OFLOW| \ + RL_ISR_PCS_TIMEOUT|RL_ISR_SYSTEM_ERR|RL_ISR_TIMEOUT_EXPIRED) +#endif + +/* + * Media status register. (8139 only) + */ +#define RL_MEDIASTAT_RXPAUSE 0x01 +#define RL_MEDIASTAT_TXPAUSE 0x02 +#define RL_MEDIASTAT_LINK 0x04 +#define RL_MEDIASTAT_SPEED10 0x08 +#define RL_MEDIASTAT_RXFLOWCTL 0x40 /* duplex mode */ +#define RL_MEDIASTAT_TXFLOWCTL 0x80 /* duplex mode */ + +/* + * Receive config register. + */ +#define RL_RXCFG_RX_ALLPHYS 0x00000001 /* accept all nodes */ +#define RL_RXCFG_RX_INDIV 0x00000002 /* match filter */ +#define RL_RXCFG_RX_MULTI 0x00000004 /* accept all multicast */ +#define RL_RXCFG_RX_BROAD 0x00000008 /* accept all broadcast */ +#define RL_RXCFG_RX_RUNT 0x00000010 +#define RL_RXCFG_RX_ERRPKT 0x00000020 +#define RL_RXCFG_WRAP 0x00000080 +#define RL_RXCFG_MAXDMA 0x00000700 +#define RL_RXCFG_BUFSZ 0x00001800 +#define RL_RXCFG_FIFOTHRESH 0x0000E000 +#define RL_RXCFG_EARLYTHRESH 0x07000000 + +#define RL_RXDMA_16BYTES 0x00000000 +#define RL_RXDMA_32BYTES 0x00000100 +#define RL_RXDMA_64BYTES 0x00000200 +#define RL_RXDMA_128BYTES 0x00000300 +#define RL_RXDMA_256BYTES 0x00000400 +#define RL_RXDMA_512BYTES 0x00000500 +#define RL_RXDMA_1024BYTES 0x00000600 +#define RL_RXDMA_UNLIMITED 0x00000700 + +#define RL_RXBUF_8 0x00000000 +#define RL_RXBUF_16 0x00000800 +#define RL_RXBUF_32 0x00001000 +#define RL_RXBUF_64 0x00001800 + +#define RL_RXFIFO_16BYTES 0x00000000 +#define RL_RXFIFO_32BYTES 0x00002000 +#define RL_RXFIFO_64BYTES 0x00004000 +#define RL_RXFIFO_128BYTES 0x00006000 +#define RL_RXFIFO_256BYTES 0x00008000 +#define RL_RXFIFO_512BYTES 0x0000A000 +#define RL_RXFIFO_1024BYTES 0x0000C000 +#define RL_RXFIFO_NOTHRESH 0x0000E000 + +/* + * Bits in RX status header (included with RX'ed packet + * in ring buffer). + */ +#define RL_RXSTAT_RXOK 0x00000001 +#define RL_RXSTAT_ALIGNERR 0x00000002 +#define RL_RXSTAT_CRCERR 0x00000004 +#define RL_RXSTAT_GIANT 0x00000008 +#define RL_RXSTAT_RUNT 0x00000010 +#define RL_RXSTAT_BADSYM 0x00000020 +#define RL_RXSTAT_BROAD 0x00002000 +#define RL_RXSTAT_INDIV 0x00004000 +#define RL_RXSTAT_MULTI 0x00008000 +#define RL_RXSTAT_LENMASK 0xFFFF0000 + +#define RL_RXSTAT_UNFINISHED 0xFFF0 /* DMA still in progress */ +/* + * Command register. + */ +#define RL_CMD_EMPTY_RXBUF 0x0001 +#define RL_CMD_TX_ENB 0x0004 +#define RL_CMD_RX_ENB 0x0008 +#define RL_CMD_RESET 0x0010 + +/* + * EEPROM control register + */ +#define RL_EE_DATAOUT 0x01 /* Data out */ +#define RL_EE_DATAIN 0x02 /* Data in */ +#define RL_EE_CLK 0x04 /* clock */ +#define RL_EE_SEL 0x08 /* chip select */ +#define RL_EE_MODE (0x40|0x80) + +#define RL_EEMODE_OFF 0x00 +#define RL_EEMODE_AUTOLOAD 0x40 +#define RL_EEMODE_PROGRAM 0x80 +#define RL_EEMODE_WRITECFG (0x80|0x40) + +/* 9346 EEPROM commands */ +#define RL_9346_ADDR_LEN 6 /* 93C46 1K: 128x16 */ +#define RL_9356_ADDR_LEN 8 /* 93C56 2K: 256x16 */ + +#define RL_9346_WRITE 0x5 +#define RL_9346_READ 0x6 +#define RL_9346_ERASE 0x7 +#define RL_9346_EWEN 0x4 +#define RL_9346_EWEN_ADDR 0x30 +#define RL_9456_EWDS 0x4 +#define RL_9346_EWDS_ADDR 0x00 + +#define RL_EECMD_WRITE 0x140 +#define RL_EECMD_READ_6BIT 0x180 +#define RL_EECMD_READ_8BIT 0x600 +#define RL_EECMD_ERASE 0x1c0 + +#define RL_EE_ID 0x00 +#define RL_EE_PCI_VID 0x01 +#define RL_EE_PCI_DID 0x02 +/* Location of station address inside EEPROM */ +#define RL_EE_EADDR 0x07 + +/* + * MII register (8129 only) + */ +#define RL_MII_CLK 0x01 +#define RL_MII_DATAIN 0x02 +#define RL_MII_DATAOUT 0x04 +#define RL_MII_DIR 0x80 /* 0 == input, 1 == output */ + +/* + * Config 0 register + */ +#define RL_CFG0_ROM0 0x01 +#define RL_CFG0_ROM1 0x02 +#define RL_CFG0_ROM2 0x04 +#define RL_CFG0_PL0 0x08 +#define RL_CFG0_PL1 0x10 +#define RL_CFG0_10MBPS 0x20 /* 10 Mbps internal mode */ +#define RL_CFG0_PCS 0x40 +#define RL_CFG0_SCR 0x80 + +/* + * Config 1 register + */ +#define RL_CFG1_PWRDWN 0x01 +#define RL_CFG1_PME 0x01 +#define RL_CFG1_SLEEP 0x02 +#define RL_CFG1_VPDEN 0x02 +#define RL_CFG1_IOMAP 0x04 +#define RL_CFG1_MEMMAP 0x08 +#define RL_CFG1_RSVD 0x10 +#define RL_CFG1_LWACT 0x10 +#define RL_CFG1_DRVLOAD 0x20 +#define RL_CFG1_LED0 0x40 +#define RL_CFG1_FULLDUPLEX 0x40 /* 8129 only */ +#define RL_CFG1_LED1 0x80 + +/* + * Config 2 register + */ +#define RL_CFG2_PCI33MHZ 0x00 +#define RL_CFG2_PCI66MHZ 0x01 +#define RL_CFG2_PCI64BIT 0x08 +#define RL_CFG2_AUXPWR 0x10 +#define RL_CFG2_MSI 0x20 + +/* + * Config 3 register + */ +#define RL_CFG3_GRANTSEL 0x80 +#define RL_CFG3_WOL_MAGIC 0x20 +#define RL_CFG3_WOL_LINK 0x10 +#define RL_CFG3_FAST_B2B 0x01 + +/* + * Config 4 register + */ +#define RL_CFG4_LWPTN 0x04 +#define RL_CFG4_LWPME 0x10 + +/* + * Config 5 register + */ +#define RL_CFG5_WOL_BCAST 0x40 +#define RL_CFG5_WOL_MCAST 0x20 +#define RL_CFG5_WOL_UCAST 0x10 +#define RL_CFG5_WOL_LANWAKE 0x02 +#define RL_CFG5_PME_STS 0x01 + +/* + * 8139C+ register definitions + */ + +/* RL_DUMPSTATS_LO register */ + +#define RL_DUMPSTATS_START 0x00000008 + +/* Transmit start register */ + +#define RL_TXSTART_SWI 0x01 /* generate TX interrupt */ +#define RL_TXSTART_START 0x40 /* start normal queue transmit */ +#define RL_TXSTART_HPRIO_START 0x80 /* start hi prio queue transmit */ + +/* + * Config 2 register, 8139C+/8169/8169S/8110S only + */ +#define RL_CFG2_BUSFREQ 0x07 +#define RL_CFG2_BUSWIDTH 0x08 +#define RL_CFG2_AUXPWRSTS 0x10 + +#define RL_BUSFREQ_33MHZ 0x00 +#define RL_BUSFREQ_66MHZ 0x01 + +#define RL_BUSWIDTH_32BITS 0x00 +#define RL_BUSWIDTH_64BITS 0x08 + +/* C+ mode command register */ + +#define RL_CPLUSCMD_TXENB 0x0001 /* enable C+ transmit mode */ +#define RL_CPLUSCMD_RXENB 0x0002 /* enable C+ receive mode */ +#define RL_CPLUSCMD_PCI_MRW 0x0008 /* enable PCI multi-read/write */ +#define RL_CPLUSCMD_PCI_DAC 0x0010 /* PCI dual-address cycle only */ +#define RL_CPLUSCMD_RXCSUM_ENB 0x0020 /* enable RX checksum offload */ +#define RL_CPLUSCMD_VLANSTRIP 0x0040 /* enable VLAN tag stripping */ +#define RL_CPLUSCMD_MACSTAT_DIS 0x0080 /* 8168B/C/CP */ +#define RL_CPLUSCMD_ASF 0x0100 /* 8168C/CP */ +#define RL_CPLUSCMD_DBG_SEL 0x0200 /* 8168C/CP */ +#define RL_CPLUSCMD_FORCE_TXFC 0x0400 /* 8168C/CP */ +#define RL_CPLUSCMD_FORCE_RXFC 0x0800 /* 8168C/CP */ +#define RL_CPLUSCMD_FORCE_HDPX 0x1000 /* 8168C/CP */ +#define RL_CPLUSCMD_NORMAL_MODE 0x2000 /* 8168C/CP */ +#define RL_CPLUSCMD_DBG_ENB 0x4000 /* 8168C/CP */ +#define RL_CPLUSCMD_BIST_ENB 0x8000 /* 8168C/CP */ + +/* C+ early transmit threshold */ + +#define RL_EARLYTXTHRESH_CNT 0x003F /* byte count times 8 */ + +/* + * Gigabit PHY access register (8169 only) + */ + +#define RL_PHYAR_PHYDATA 0x0000FFFF +#define RL_PHYAR_PHYREG 0x001F0000 +#define RL_PHYAR_BUSY 0x80000000 + +/* + * Gigabit media status (8169 only) + */ +#define RL_GMEDIASTAT_FDX 0x01 /* full duplex */ +#define RL_GMEDIASTAT_LINK 0x02 /* link up */ +#define RL_GMEDIASTAT_10MBPS 0x04 /* 10mps link */ +#define RL_GMEDIASTAT_100MBPS 0x08 /* 100mbps link */ +#define RL_GMEDIASTAT_1000MBPS 0x10 /* gigE link */ +#define RL_GMEDIASTAT_RXFLOW 0x20 /* RX flow control on */ +#define RL_GMEDIASTAT_TXFLOW 0x40 /* TX flow control on */ +#define RL_GMEDIASTAT_TBI 0x80 /* TBI enabled */ + +/* + * The RealTek doesn't use a fragment-based descriptor mechanism. + * Instead, there are only four register sets, each or which represents + * one 'descriptor.' Basically, each TX descriptor is just a contiguous + * packet buffer (32-bit aligned!) and we place the buffer addresses in + * the registers so the chip knows where they are. + * + * We can sort of kludge together the same kind of buffer management + * used in previous drivers, but we have to do buffer copies almost all + * the time, so it doesn't really buy us much. + * + * For reception, there's just one large buffer where the chip stores + * all received packets. + */ + +#define RL_RX_BUF_SZ RL_RXBUF_64 +#define RL_RXBUFLEN (1 << ((RL_RX_BUF_SZ >> 11) + 13)) +#define RL_TX_LIST_CNT 4 +#define RL_MIN_FRAMELEN 60 +#define RL_TXTHRESH(x) ((x) << 11) +#define RL_TX_THRESH_INIT 96 +#define RL_RX_FIFOTHRESH RL_RXFIFO_NOTHRESH +#define RL_RX_MAXDMA RL_RXDMA_UNLIMITED +#define RL_TX_MAXDMA RL_TXDMA_2048BYTES + +#define RL_RXCFG_CONFIG (RL_RX_FIFOTHRESH|RL_RX_MAXDMA|RL_RX_BUF_SZ) +#define RL_TXCFG_CONFIG (RL_TXCFG_IFG|RL_TX_MAXDMA) + +#define RL_ETHER_ALIGN 2 + +/* + * re(4) hardware ip4csum-tx could be mangled with 28 bytes or less IP packets. + */ +#define RL_IP4CSUMTX_MINLEN 28 +#define RL_IP4CSUMTX_PADLEN (ETHER_HDR_LEN + RL_IP4CSUMTX_MINLEN) + +struct rl_chain_data { + uint16_t cur_rx; + uint8_t *rl_rx_buf; + uint8_t *rl_rx_buf_ptr; + bus_dmamap_t rl_rx_dmamap; + + struct mbuf *rl_tx_chain[RL_TX_LIST_CNT]; + bus_dmamap_t rl_tx_dmamap[RL_TX_LIST_CNT]; + uint8_t last_tx; + uint8_t cur_tx; +}; + +#define RL_INC(x) (x = (x + 1) % RL_TX_LIST_CNT) +#define RL_CUR_TXADDR(x) ((x->rl_cdata.cur_tx * 4) + RL_TXADDR0) +#define RL_CUR_TXSTAT(x) ((x->rl_cdata.cur_tx * 4) + RL_TXSTAT0) +#define RL_CUR_TXMBUF(x) (x->rl_cdata.rl_tx_chain[x->rl_cdata.cur_tx]) +#define RL_CUR_DMAMAP(x) (x->rl_cdata.rl_tx_dmamap[x->rl_cdata.cur_tx]) +#define RL_LAST_TXADDR(x) ((x->rl_cdata.last_tx * 4) + RL_TXADDR0) +#define RL_LAST_TXSTAT(x) ((x->rl_cdata.last_tx * 4) + RL_TXSTAT0) +#define RL_LAST_TXMBUF(x) (x->rl_cdata.rl_tx_chain[x->rl_cdata.last_tx]) +#define RL_LAST_DMAMAP(x) (x->rl_cdata.rl_tx_dmamap[x->rl_cdata.last_tx]) + +struct rl_type { + uint16_t rl_vid; + uint16_t rl_did; + int rl_basetype; + char *rl_name; +}; + +struct rl_hwrev { + uint32_t rl_rev; + int rl_type; + char *rl_desc; +}; + +struct rl_mii_frame { + uint8_t mii_stdelim; + uint8_t mii_opcode; + uint8_t mii_phyaddr; + uint8_t mii_regaddr; + uint8_t mii_turnaround; + uint16_t mii_data; +}; + +/* + * MII constants + */ +#define RL_MII_STARTDELIM 0x01 +#define RL_MII_READOP 0x02 +#define RL_MII_WRITEOP 0x01 +#define RL_MII_TURNAROUND 0x02 + +#define RL_8129 1 +#define RL_8139 2 +#define RL_8139CPLUS 3 +#define RL_8169 4 + +#define RL_ISCPLUS(x) ((x)->rl_type == RL_8139CPLUS || \ + (x)->rl_type == RL_8169) + +/* + * The 8139C+ and 8160 gigE chips support descriptor-based TX + * and RX. In fact, they even support TCP large send. Descriptors + * must be allocated in contiguous blocks that are aligned on a + * 256-byte boundary. The rings can hold a maximum of 64 descriptors. + */ + +/* + * RX/TX descriptor definition. When large send mode is enabled, the + * lower 11 bits of the TX rl_cmd word are used to hold the MSS, and + * the checksum offload bits are disabled. The structure layout is + * the same for RX and TX descriptors + */ + +struct rl_desc { + uint32_t rl_cmdstat; + uint32_t rl_vlanctl; + uint32_t rl_bufaddr_lo; + uint32_t rl_bufaddr_hi; +}; + +#define RL_TDESC_CMD_FRAGLEN 0x0000FFFF +#define RL_TDESC_CMD_TCPCSUM 0x00010000 /* TCP checksum enable */ +#define RL_TDESC_CMD_UDPCSUM 0x00020000 /* UDP checksum enable */ +#define RL_TDESC_CMD_IPCSUM 0x00040000 /* IP header checksum enable */ +#define RL_TDESC_CMD_MSSVAL 0x07FF0000 /* Large send MSS value */ +#define RL_TDESC_CMD_MSSVAL_SHIFT 16 /* Large send MSS value shift */ +#define RL_TDESC_CMD_LGSEND 0x08000000 /* TCP large send enb */ +#define RL_TDESC_CMD_EOF 0x10000000 /* end of frame marker */ +#define RL_TDESC_CMD_SOF 0x20000000 /* start of frame marker */ +#define RL_TDESC_CMD_EOR 0x40000000 /* end of ring marker */ +#define RL_TDESC_CMD_OWN 0x80000000 /* chip owns descriptor */ + +#define RL_TDESC_VLANCTL_TAG 0x00020000 /* Insert VLAN tag */ +#define RL_TDESC_VLANCTL_DATA 0x0000FFFF /* TAG data */ +/* RTL8168C/RTL8168CP/RTL8111C/RTL8111CP */ +#define RL_TDESC_CMD_UDPCSUMV2 0x80000000 +#define RL_TDESC_CMD_TCPCSUMV2 0x40000000 +#define RL_TDESC_CMD_IPCSUMV2 0x20000000 + +/* + * Error bits are valid only on the last descriptor of a frame + * (i.e. RL_TDESC_CMD_EOF == 1) + */ + +#define RL_TDESC_STAT_COLCNT 0x000F0000 /* collision count */ +#define RL_TDESC_STAT_EXCESSCOL 0x00100000 /* excessive collisions */ +#define RL_TDESC_STAT_LINKFAIL 0x00200000 /* link faulure */ +#define RL_TDESC_STAT_OWINCOL 0x00400000 /* out-of-window collision */ +#define RL_TDESC_STAT_TXERRSUM 0x00800000 /* transmit error summary */ +#define RL_TDESC_STAT_UNDERRUN 0x02000000 /* TX underrun occured */ +#define RL_TDESC_STAT_OWN 0x80000000 + +/* + * RX descriptor cmd/vlan definitions + */ + +#define RL_RDESC_CMD_EOR 0x40000000 +#define RL_RDESC_CMD_OWN 0x80000000 +#define RL_RDESC_CMD_BUFLEN 0x00001FFF + +#define RL_RDESC_STAT_OWN 0x80000000 +#define RL_RDESC_STAT_EOR 0x40000000 +#define RL_RDESC_STAT_SOF 0x20000000 +#define RL_RDESC_STAT_EOF 0x10000000 +#define RL_RDESC_STAT_FRALIGN 0x08000000 /* frame alignment error */ +#define RL_RDESC_STAT_MCAST 0x04000000 /* multicast pkt received */ +#define RL_RDESC_STAT_UCAST 0x02000000 /* unicast pkt received */ +#define RL_RDESC_STAT_BCAST 0x01000000 /* broadcast pkt received */ +#define RL_RDESC_STAT_BUFOFLOW 0x00800000 /* out of buffer space */ +#define RL_RDESC_STAT_FIFOOFLOW 0x00400000 /* FIFO overrun */ +#define RL_RDESC_STAT_GIANT 0x00200000 /* pkt > 4096 bytes */ +#define RL_RDESC_STAT_RXERRSUM 0x00100000 /* RX error summary */ +#define RL_RDESC_STAT_RUNT 0x00080000 /* runt packet received */ +#define RL_RDESC_STAT_CRCERR 0x00040000 /* CRC error */ +#define RL_RDESC_STAT_PROTOID 0x00030000 /* Protocol type */ +#define RL_RDESC_STAT_UDP 0x00020000 /* UDP, 8168C/CP, 8111C/CP */ +#define RL_RDESC_STAT_TCP 0x00010000 /* TCP, 8168C/CP, 8111C/CP */ +#define RL_RDESC_STAT_IPSUMBAD 0x00008000 /* IP header checksum bad */ +#define RL_RDESC_STAT_UDPSUMBAD 0x00004000 /* UDP checksum bad */ +#define RL_RDESC_STAT_TCPSUMBAD 0x00002000 /* TCP checksum bad */ +#define RL_RDESC_STAT_FRAGLEN 0x00001FFF /* RX'ed frame/frag len */ +#define RL_RDESC_STAT_GFRAGLEN 0x00003FFF /* RX'ed frame/frag len */ +#define RL_RDESC_STAT_ERRS (RL_RDESC_STAT_GIANT|RL_RDESC_STAT_RUNT| \ + RL_RDESC_STAT_CRCERR) + +#define RL_RDESC_VLANCTL_TAG 0x00010000 /* VLAN tag available + (rl_vlandata valid)*/ +#define RL_RDESC_VLANCTL_DATA 0x0000FFFF /* TAG data */ +/* RTL8168C/RTL8168CP/RTL8111C/RTL8111CP */ +#define RL_RDESC_IPV6 0x80000000 +#define RL_RDESC_IPV4 0x40000000 + +#define RL_PROTOID_NONIP 0x00000000 +#define RL_PROTOID_TCPIP 0x00010000 +#define RL_PROTOID_UDPIP 0x00020000 +#define RL_PROTOID_IP 0x00030000 +#define RL_TCPPKT(x) (((x) & RL_RDESC_STAT_PROTOID) == \ + RL_PROTOID_TCPIP) +#define RL_UDPPKT(x) (((x) & RL_RDESC_STAT_PROTOID) == \ + RL_PROTOID_UDPIP) + +/* + * Statistics counter structure (8139C+ and 8169 only) + */ +struct rl_stats { + uint32_t rl_tx_pkts_lo; + uint32_t rl_tx_pkts_hi; + uint32_t rl_tx_errs_lo; + uint32_t rl_tx_errs_hi; + uint32_t rl_tx_errs; + uint16_t rl_missed_pkts; + uint16_t rl_rx_framealign_errs; + uint32_t rl_tx_onecoll; + uint32_t rl_tx_multicolls; + uint32_t rl_rx_ucasts_hi; + uint32_t rl_rx_ucasts_lo; + uint32_t rl_rx_bcasts_lo; + uint32_t rl_rx_bcasts_hi; + uint32_t rl_rx_mcasts; + uint16_t rl_tx_aborts; + uint16_t rl_rx_underruns; +}; + +/* + * Rx/Tx descriptor parameters (8139C+ and 8169 only) + * + * 8139C+ + * Number of descriptors supported : up to 64 + * Descriptor alignment : 256 bytes + * Tx buffer : At least 4 bytes in length. + * Rx buffer : At least 8 bytes in length and 8 bytes alignment required. + * + * 8169 + * Number of descriptors supported : up to 1024 + * Descriptor alignment : 256 bytes + * Tx buffer : At least 4 bytes in length. + * Rx buffer : At least 8 bytes in length and 8 bytes alignment required. + */ +#ifndef __NO_STRICT_ALIGNMENT +#define RE_FIXUP_RX 1 +#endif + +#define RL_8169_TX_DESC_CNT 256 +#define RL_8169_RX_DESC_CNT 256 +#define RL_8139_TX_DESC_CNT 64 +#define RL_8139_RX_DESC_CNT 64 +#define RL_TX_DESC_CNT RL_8169_TX_DESC_CNT +#define RL_RX_DESC_CNT RL_8169_RX_DESC_CNT +#define RL_NTXSEGS 32 + +#define RL_RING_ALIGN 256 +#define RL_IFQ_MAXLEN 512 +#define RL_TX_DESC_NXT(sc,x) ((x + 1) & ((sc)->rl_ldata.rl_tx_desc_cnt - 1)) +#define RL_TX_DESC_PRV(sc,x) ((x - 1) & ((sc)->rl_ldata.rl_tx_desc_cnt - 1)) +#define RL_RX_DESC_NXT(sc,x) ((x + 1) & ((sc)->rl_ldata.rl_rx_desc_cnt - 1)) +#define RL_OWN(x) (le32toh((x)->rl_cmdstat) & RL_RDESC_STAT_OWN) +#define RL_RXBYTES(x) (le32toh((x)->rl_cmdstat) & sc->rl_rxlenmask) +#define RL_PKTSZ(x) ((x)/* >> 3*/) +#ifdef RE_FIXUP_RX +#define RE_ETHER_ALIGN sizeof(uint64_t) +#define RE_RX_DESC_BUFLEN (MCLBYTES - RE_ETHER_ALIGN) +#else +#define RE_ETHER_ALIGN 0 +#define RE_RX_DESC_BUFLEN MCLBYTES +#endif + +#define RL_MSI_MESSAGES 2 + +#define RL_ADDR_LO(y) ((uint64_t) (y) & 0xFFFFFFFF) +#define RL_ADDR_HI(y) ((uint64_t) (y) >> 32) + +/* + * The number of bits reserved for MSS in RealTek controllers is + * 11bits. This limits the maximum interface MTU size in TSO case + * as upper stack should not generate TCP segments with MSS greater + * than the limit. + */ +#define RL_TSO_MTU (2047 - ETHER_HDR_LEN - ETHER_CRC_LEN) + +/* see comment in dev/re/if_re.c */ +#define RL_JUMBO_FRAMELEN 7440 +#define RL_JUMBO_MTU (RL_JUMBO_FRAMELEN-ETHER_HDR_LEN-ETHER_CRC_LEN) +#define RL_MAX_FRAMELEN \ + (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN - ETHER_HDR_LEN - ETHER_CRC_LEN) + +struct rl_txdesc { + struct mbuf *tx_m; + bus_dmamap_t tx_dmamap; +}; + +struct rl_rxdesc { + struct mbuf *rx_m; + bus_dmamap_t rx_dmamap; + bus_size_t rx_size; +}; + +struct rl_list_data { + struct rl_txdesc rl_tx_desc[RL_TX_DESC_CNT]; + struct rl_rxdesc rl_rx_desc[RL_RX_DESC_CNT]; + int rl_tx_desc_cnt; + int rl_rx_desc_cnt; + int rl_tx_prodidx; + int rl_rx_prodidx; + int rl_tx_considx; + int rl_tx_free; + bus_dma_tag_t rl_tx_mtag; /* mbuf TX mapping tag */ + bus_dma_tag_t rl_rx_mtag; /* mbuf RX mapping tag */ + bus_dmamap_t rl_rx_sparemap; + bus_dma_tag_t rl_stag; /* stats mapping tag */ + bus_dmamap_t rl_smap; /* stats map */ + struct rl_stats *rl_stats; + bus_addr_t rl_stats_addr; + bus_dma_tag_t rl_rx_list_tag; + bus_dmamap_t rl_rx_list_map; + struct rl_desc *rl_rx_list; + bus_addr_t rl_rx_list_addr; + bus_dma_tag_t rl_tx_list_tag; + bus_dmamap_t rl_tx_list_map; + struct rl_desc *rl_tx_list; + bus_addr_t rl_tx_list_addr; +}; + +struct rl_softc { + struct ifnet *rl_ifp; /* interface info */ + bus_space_handle_t rl_bhandle; /* bus space handle */ + bus_space_tag_t rl_btag; /* bus space tag */ + device_t rl_dev; + struct resource *rl_res; + int rl_res_id; + int rl_res_type; + struct resource *rl_irq[RL_MSI_MESSAGES]; + void *rl_intrhand[RL_MSI_MESSAGES]; + device_t rl_miibus; + bus_dma_tag_t rl_parent_tag; + bus_dma_tag_t rl_tag; + uint8_t rl_type; + int rl_eecmd_read; + int rl_eewidth; + uint8_t rl_stats_no_timeout; + int rl_txthresh; + struct rl_chain_data rl_cdata; + struct rl_list_data rl_ldata; + struct callout rl_stat_callout; + int rl_watchdog_timer; + struct mtx rl_mtx; + struct mbuf *rl_head; + struct mbuf *rl_tail; + uint32_t rl_hwrev; + uint32_t rl_rxlenmask; + int rl_testmode; + int rl_if_flags; + int suspended; /* 0 = normal 1 = suspended */ +#ifdef DEVICE_POLLING + int rxcycles; +#endif + + struct task rl_txtask; + struct task rl_inttask; + + int rl_txstart; + uint32_t rl_flags; +#define RL_FLAG_MSI 0x0001 +#define RL_FLAG_INVMAR 0x0004 +#define RL_FLAG_PHYWAKE 0x0008 +#define RL_FLAG_NOJUMBO 0x0010 +#define RL_FLAG_PAR 0x0020 +#define RL_FLAG_DESCV2 0x0040 +#define RL_FLAG_MACSTAT 0x0080 +#define RL_FLAG_LINK 0x8000 +}; + +#define RL_LOCK(_sc) mtx_lock(&(_sc)->rl_mtx) +#define RL_UNLOCK(_sc) mtx_unlock(&(_sc)->rl_mtx) +#define RL_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->rl_mtx, MA_OWNED) + +/* + * register space access macros + */ +#define CSR_WRITE_STREAM_4(sc, reg, val) \ + bus_space_write_stream_4(sc->rl_btag, sc->rl_bhandle, reg, val) +#define CSR_WRITE_4(sc, reg, val) \ + bus_space_write_4(sc->rl_btag, sc->rl_bhandle, reg, val) +#define CSR_WRITE_2(sc, reg, val) \ + bus_space_write_2(sc->rl_btag, sc->rl_bhandle, reg, val) +#define CSR_WRITE_1(sc, reg, val) \ + bus_space_write_1(sc->rl_btag, sc->rl_bhandle, reg, val) + +#define CSR_READ_4(sc, reg) \ + bus_space_read_4(sc->rl_btag, sc->rl_bhandle, reg) +#define CSR_READ_2(sc, reg) \ + bus_space_read_2(sc->rl_btag, sc->rl_bhandle, reg) +#define CSR_READ_1(sc, reg) \ + bus_space_read_1(sc->rl_btag, sc->rl_bhandle, reg) + +#define CSR_SETBIT_1(sc, offset, val) \ + CSR_WRITE_1(sc, offset, CSR_READ_1(sc, offset) | (val)) + +#define CSR_CLRBIT_1(sc, offset, val) \ + CSR_WRITE_1(sc, offset, CSR_READ_1(sc, offset) & ~(val)) + +#define CSR_SETBIT_2(sc, offset, val) \ + CSR_WRITE_2(sc, offset, CSR_READ_2(sc, offset) | (val)) + +#define CSR_CLRBIT_2(sc, offset, val) \ + CSR_WRITE_2(sc, offset, CSR_READ_2(sc, offset) & ~(val)) + +#define CSR_SETBIT_4(sc, offset, val) \ + CSR_WRITE_4(sc, offset, CSR_READ_4(sc, offset) | (val)) + +#define CSR_CLRBIT_4(sc, offset, val) \ + CSR_WRITE_4(sc, offset, CSR_READ_4(sc, offset) & ~(val)) + +#define RL_TIMEOUT 1000 + +/* + * General constants that are fun to know. + * + * RealTek PCI vendor ID + */ +#define RT_VENDORID 0x10EC + +/* + * RealTek chip device IDs. + */ +#define RT_DEVICEID_8139D 0x8039 +#define RT_DEVICEID_8129 0x8129 +#define RT_DEVICEID_8101E 0x8136 +#define RT_DEVICEID_8138 0x8138 +#define RT_DEVICEID_8139 0x8139 +#define RT_DEVICEID_8169SC 0x8167 +#define RT_DEVICEID_8168 0x8168 +#define RT_DEVICEID_8169 0x8169 +#define RT_DEVICEID_8100 0x8100 + +#define RT_REVID_8139CPLUS 0x20 + +/* + * Accton PCI vendor ID + */ +#define ACCTON_VENDORID 0x1113 + +/* + * Accton MPX 5030/5038 device ID. + */ +#define ACCTON_DEVICEID_5030 0x1211 + +/* + * Nortel PCI vendor ID + */ +#define NORTEL_VENDORID 0x126C + +/* + * Delta Electronics Vendor ID. + */ +#define DELTA_VENDORID 0x1500 + +/* + * Delta device IDs. + */ +#define DELTA_DEVICEID_8139 0x1360 + +/* + * Addtron vendor ID. + */ +#define ADDTRON_VENDORID 0x4033 + +/* + * Addtron device IDs. + */ +#define ADDTRON_DEVICEID_8139 0x1360 + +/* + * D-Link vendor ID. + */ +#define DLINK_VENDORID 0x1186 + +/* + * D-Link DFE-530TX+ device ID + */ +#define DLINK_DEVICEID_530TXPLUS 0x1300 + +/* + * D-Link DFE-5280T device ID + */ +#define DLINK_DEVICEID_528T 0x4300 + +/* + * D-Link DFE-690TXD device ID + */ +#define DLINK_DEVICEID_690TXD 0x1340 + +/* + * Corega K.K vendor ID + */ +#define COREGA_VENDORID 0x1259 + +/* + * Corega FEther CB-TXD device ID + */ +#define COREGA_DEVICEID_FETHERCBTXD 0xa117 + +/* + * Corega FEtherII CB-TXD device ID + */ +#define COREGA_DEVICEID_FETHERIICBTXD 0xa11e + +/* + * Corega CG-LAPCIGT device ID + */ +#define COREGA_DEVICEID_CGLAPCIGT 0xc107 + +/* + * Linksys vendor ID + */ +#define LINKSYS_VENDORID 0x1737 + +/* + * Linksys EG1032 device ID + */ +#define LINKSYS_DEVICEID_EG1032 0x1032 + +/* + * Linksys EG1032 rev 3 sub-device ID + */ +#define LINKSYS_SUBDEVICE_EG1032_REV3 0x0024 + +/* + * Peppercon vendor ID + */ +#define PEPPERCON_VENDORID 0x1743 + +/* + * Peppercon ROL-F device ID + */ +#define PEPPERCON_DEVICEID_ROLF 0x8139 + +/* + * Planex Communications, Inc. vendor ID + */ +#define PLANEX_VENDORID 0x14ea + +/* + * Planex FNW-3603-TX device ID + */ +#define PLANEX_DEVICEID_FNW3603TX 0xab06 + +/* + * Planex FNW-3800-TX device ID + */ +#define PLANEX_DEVICEID_FNW3800TX 0xab07 + +/* + * LevelOne vendor ID + */ +#define LEVEL1_VENDORID 0x018A + +/* + * LevelOne FPC-0106TX devide ID + */ +#define LEVEL1_DEVICEID_FPC0106TX 0x0106 + +/* + * Compaq vendor ID + */ +#define CP_VENDORID 0x021B + +/* + * Edimax vendor ID + */ +#define EDIMAX_VENDORID 0x13D1 + +/* + * Edimax EP-4103DL cardbus device ID + */ +#define EDIMAX_DEVICEID_EP4103DL 0xAB06 + +/* US Robotics vendor ID */ + +#define USR_VENDORID 0x16EC + +/* US Robotics 997902 device ID */ + +#define USR_DEVICEID_997902 0x0116 + +/* + * PCI low memory base and low I/O base register, and + * other PCI registers. + */ + +#define RL_PCI_VENDOR_ID 0x00 +#define RL_PCI_DEVICE_ID 0x02 +#define RL_PCI_COMMAND 0x04 +#define RL_PCI_STATUS 0x06 +#define RL_PCI_CLASSCODE 0x09 +#define RL_PCI_LATENCY_TIMER 0x0D +#define RL_PCI_HEADER_TYPE 0x0E +#define RL_PCI_LOIO 0x10 +#define RL_PCI_LOMEM 0x14 +#define RL_PCI_BIOSROM 0x30 +#define RL_PCI_INTLINE 0x3C +#define RL_PCI_INTPIN 0x3D +#define RL_PCI_MINGNT 0x3E +#define RL_PCI_MINLAT 0x0F +#define RL_PCI_RESETOPT 0x48 +#define RL_PCI_EEPROM_DATA 0x4C + +#define RL_PCI_CAPID 0x50 /* 8 bits */ +#define RL_PCI_NEXTPTR 0x51 /* 8 bits */ +#define RL_PCI_PWRMGMTCAP 0x52 /* 16 bits */ +#define RL_PCI_PWRMGMTCTRL 0x54 /* 16 bits */ + +#define RL_PSTATE_MASK 0x0003 +#define RL_PSTATE_D0 0x0000 +#define RL_PSTATE_D1 0x0002 +#define RL_PSTATE_D2 0x0002 +#define RL_PSTATE_D3 0x0003 +#define RL_PME_EN 0x0010 +#define RL_PME_STATUS 0x8000 +