Only one code change: for some reason, GCC chokes on the cr3 functions
as macros (throwing errors about invalid registers.) The BSDs have them
as inline functions instead, so they are converted to that here.
Tested and working. There seems to be about a 10% decrease in CPU time
on some compilation benchmarks that I briefly tried.
Change-Id: I31666297394d7619f83fca6ff5f933ddd6f07420
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4515
Tested-by: Commit checker robot <[email protected]>
Reviewed-by: waddlesplash <[email protected]>
* Drop ArchUART8260 layer to reduce complexity. It's whole
existance in life was to adjust the mmio alignment.
* Fold architecture mmio alignment into DebugUart
* We could potentially pass a Init(int mmioAlignment)
arg in the future if the macros get too messy.
* Move Barrier code back a layer into DebugUART
* Fixes the arm uart and EFI build
Change-Id: I0f127d902993e9f6e6a03cac8c7c37c0363134bf
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4422
Reviewed-by: Alex von Gluck IV <[email protected]>
Reviewed-by: waddlesplash <[email protected]>
Tested-by: Commit checker robot <[email protected]>
* We really should get out of the habbit of making up
our own architecture defines.
* __riscv with an additional __riscv_xlen is the
standard that developed... let's just roll with it.
Change-Id: Ieb777d48340ae25a6d66f66133afa0ec5c6da9b6
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4402
Tested-by: Commit checker robot <[email protected]>
Reviewed-by: waddlesplash <[email protected]>
Including thread.h brings a massive array of things with it from
the kernel thread arch headers, team and thread definitions,
hash tables, linked lists, Referenceable, etc. that the vast majority
of AutoLock.h consumers neither want nor need.
So, put these in a separate header, and adjust all consumers of these
lockers to include the new file.
This change exposes the fact that a lot of files were inadvertently
making use of headers included indirectly through thread.h. Those
will be fixed in the next commit.
Previously these were just using the raw function name, which led
to markers like "Slab_begin". Now we prefix RANGE_MARKER_ so there
is absolutely no chance of confusion, and the symbols are clearly
visible in dumps.
Also add a note that the kernel must be built with -fno-toplevel-reorder
for these to work. (It seems when this was implemented, GCC had not yet
implemented top-level reordering.)
They are only used for debugging with the tracing system in a handful
of places, and -ftoplevel-reorder is enabled with optimizations for
a reason, so it makes more sense just to note this and not to enable
that option by default (i.e. in the off chance someone will want to
use these in non-debug builds, like I did.)
If the timeout is already >= B_INFINITE_TIMEOUT, we do not need
to do any of the following math (which would usually overflow anyway)
and can leave the timeout alone.
Spotted by kernel undefined behavior sanitizer.
* This models the CpuInfo into a cross-architecture
platform_cpu_info
* Originally I was looking at merging this with "arch_cpu_info"
however that is "overall cpu" while CpuInfo is "indivial core
information" packed into an array.
* Since every dtb platform will report individual cores in fdt,
having a common cpu core info struct with at minimum the core
id makes sense.
* This could likely be refined further to some kind of core info
packed inside of arch_cpu_info, but this will fix arm,arm64,etc
for now until someone wants to dive into that.
Change-Id: Ia18a352403cd0da7130c1e637fc205d4311478ef
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4363
Reviewed-by: Fredrik Holmqvist <[email protected]>
Tested-by: Commit checker robot <[email protected]>
Fixes:
* Use uint64 instead of off_t when handling offset and size
of the trimmed range in the fs_trim_data structure
* BlockAllocator::Trim: Correct the size of a buffer
* ram_disk, mmc: Do not trim past device capacity
Improvements:
* BlockAllocator::Trim: Because the received offset and size
are ignored by BFS (the functionality is not implemented yet),
return B_UNSUPPORTED if the range does not cover the whole
partition
* ram_disk, mmc: More accurate calculation of the number
of trimmed bytes
* devfs: Add a uint64 version of translate_partition_access()
Change-Id: I24f4c08674f123ad33a5fef6e28996a4ada6ff0d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4155
Tested-by: Commit checker robot <[email protected]>
Reviewed-by: Adrien Destugues <[email protected]>
* Makes the case where the loader and the install differ by
release type, so that the icons are rendered in the same
position
Change-Id: I01e48109ce127b202ce5e05544aa2d5a495ed53e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4162
Tested-by: Commit checker robot <[email protected]>
Reviewed-by: Adrien Destugues <[email protected]>
Reviewed-by: Alex von Gluck IV <[email protected]>
This also keeps the functionality of hrev53848, which simplifies the
list of disks searched for bootable partitions; however, it maintains
the previous behaviour of platform_get_boot_partitions that continues
to iterate over a list of possible boot partitions, which should
allow finding a bootable BFS partition better in more circumstances.
Particularly, there are numerous reports of the UEFI loader entering
the boot menu despite it finding a bootable partition, which this
should address.
EFI's device_contains_partition is also structured such that it
compares the disk GPT table of the partition the loader is
querying of the EFI disk's GPT table, in the case that there are
multiple disks, as the most reliable method of comparison, with
a generic fallback for non-GPT disks, which will be less reliable.
This reverts commit 0d932a49ad.
Change-Id: I5fac8608035d56b8bb4dc6c3d495ec6db42fa9b7
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4149
Reviewed-by: Alex von Gluck IV <[email protected]>
the AC flag in eflags/rflags, pushed in the iframe by the CPU, is kept intact after handling the exception, since the fault handler is run with the faulted iframe and does a simple jump. The AC flag would otherwise be set until the syscall returns to userland.
Change-Id: I24f763032ab98029dd162fb411e1541586451606
Reviewed-on: https://review.haiku-os.org/c/haiku/+/4040
Reviewed-by: Adrien Destugues <[email protected]>
Tested-by: Commit checker robot <[email protected]>
this adds kernel & libroot stack protector hooks. it uses /dev/random in userspace.
A configure option --enable-stack-protector is added to activate -fstack-protector
on selected system components (ATM apps, kits, servers).
Change-Id: If3a2920ba9aa0a85eaff4ba6778947f8c76ade31
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3895
Reviewed-by: Adrien Destugues <[email protected]>
Various projects, both commercial and OSS, began to use inclusive
terminology. There is no reason to not do it.
In Haiku, bootloader uses Blacklist, which is recommended to replace
with Denylist or Blocklist. I think Blocklist is appropriate here,
since it's a list used to block offending driver at boot.
Some strings remain unchanged for compatibility with previous naming,
but this change prepares for later removal of these (once everyone has
updated their kernel and bootloader).
Change-Id: Id9105ff5e9fcb866000355089b5ef97bf63ee854
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3145
Reviewed-by: Adrien Destugues <[email protected]>
a protection_max attribute is added in VMArea.
a read-only opened file already can't be mapped shared read-write at the moment,
but can later be changed to read-write with mprotect() or set_area_protection().
When creating the VMArea, the actual maximum protection is stored in the area,
so that it can be checked when needed.
this fixes a VM TODO.
Change-Id: I33b144c192034eeb059f1dede5dbef5af947280d
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3804
Reviewed-by: Adrien Destugues <[email protected]>
* otherwise the signal to be handled might be blocked. fixes#15193
* also remove automatic syscall restart on _kern_select, to match Linux and
BSDs behavior: this fixes parallel build with newer gnu make, which happens
to use pselect.
* also remove automatic syscall restart on _kern_poll.
from https://man7.org/linux/man-pages/man7/signal.7.html
"The following interfaces are never restarted after being
interrupted by a signal handler, regardless of the use of
SA_RESTART; they always fail with the error EINTR when
interrupted by a signal handler: ...
select(2), and pselect(2)."
from https://notes.shichao.io/unp/ch6/
"Berkeley-derived kernels never automatically restart select."
Change-Id: I3e9488f60c966b38d427f992f06e6e2217d4adc5
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3636
Reviewed-by: Jérôme Duval <[email protected]>
Reviewed-by: Axel Dörfler <[email protected]>
* otherwise the signal to be handled might be blocked. fixes#15193
* also remove automatic syscall restart on _kern_select, to match Linux and
BSDs behavior: this fixes parallel build with newer gnu make, which happens
to use pselect.
* also remove automatic syscall restart on _kern_poll.
from https://man7.org/linux/man-pages/man7/signal.7.html
"The following interfaces are never restarted after being
interrupted by a signal handler, regardless of the use of
SA_RESTART; they always fail with the error EINTR when
interrupted by a signal handler: ...
select(2), and pselect(2)."
from https://notes.shichao.io/unp/ch6/
"Berkeley-derived kernels never automatically restart select."
Change-Id: I7f86d221eae1ad93d8a308a75581d2c30a369c9e
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3627
Reviewed-by: Adrien Destugues <[email protected]>
Reviewed-by: waddlesplash <[email protected]>
On sparc, the minimal page size we can use is 8K. Since B_PAGE_SIZE and
PAGESIZE defines were hardcoded to 4K, this resulted in a lot of
confusion in all code trying to manipulate pages.
- Remove cpu.h from headers/private/kernel/arch/*. It dates back from
NewOS and was not used anymore since our kernel uses B_PAGE_SIZE
(PAGE_SIZE was the only thing defined in this header).
- Add posix/arch/*/limits.h with the arch specific page size and include
it from the main limits.h.
- Adjust bios_ia32/debug.cpp which was the only place using the
PAGE_SIZE constant from the deleted headers.
- Change OS.h to define B_PAGE_SIZE to be the same as POSIX PAGESIZE.
- Define PAGESIZE in the build header if the host OS doesn't.
Change-Id: I8c3732cf952ea3c2f088aa16d216678fbf198b96
Reviewed-on: https://review.haiku-os.org/c/haiku/+/3558
Reviewed-by: Adrien Destugues <[email protected]>
Augustin Cavalier