ARM: add required FDT files for Overo and Tobi board
This commit is contained in:
François Revol
@@ -0,0 +1,58 @@
|
||||
/*
|
||||
* Common file for GPMC connected smsc9221 on omaps
|
||||
*
|
||||
* Compared to smsc911x, smsc9221 (and others like smsc9217
|
||||
* or smsc 9218) has faster timings, leading to higher
|
||||
* bandwidth.
|
||||
*
|
||||
* Note that the board specifc DTS file needs to specify
|
||||
* ranges, pinctrl, reg, interrupt parent and interrupts.
|
||||
*/
|
||||
|
||||
/ {
|
||||
vddvario: regulator-vddvario {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vddvario";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vdd33a: regulator-vdd33a {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd33a";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ethernet@gpmc {
|
||||
compatible = "smsc,lan9221","smsc,lan9115";
|
||||
bank-width = <2>;
|
||||
|
||||
gpmc,mux-add-data;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <42>;
|
||||
gpmc,cs-wr-off-ns = <36>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <12>;
|
||||
gpmc,adv-wr-off-ns = <12>;
|
||||
gpmc,oe-on-ns = <0>;
|
||||
gpmc,oe-off-ns = <42>;
|
||||
gpmc,we-on-ns = <0>;
|
||||
gpmc,we-off-ns = <36>;
|
||||
gpmc,rd-cycle-ns = <60>;
|
||||
gpmc,wr-cycle-ns = <54>;
|
||||
gpmc,access-ns = <36>;
|
||||
gpmc,page-burst-access-ns = <0>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,wr-data-mux-bus-ns = <18>;
|
||||
gpmc,wr-access-ns = <42>;
|
||||
gpmc,cycle2cycle-samecsen;
|
||||
gpmc,cycle2cycle-diffcsen;
|
||||
|
||||
vddvario-supply = <&vddvario>;
|
||||
vdd33a-supply = <&vdd33a>;
|
||||
reg-io-width = <4>;
|
||||
smsc,save-mac-address;
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,221 @@
|
||||
/*
|
||||
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* The Gumstix Overo must be combined with an expansion board.
|
||||
*/
|
||||
|
||||
/ {
|
||||
pwmleds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
overo {
|
||||
label = "overo:blue:COM";
|
||||
pwms = <&twl_pwmled 1 7812500>;
|
||||
max-brightness = <127>;
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ti,omap-twl4030";
|
||||
ti,model = "overo";
|
||||
|
||||
ti,mcbsp = <&mcbsp2>;
|
||||
ti,codec = <&twl_audio>;
|
||||
};
|
||||
|
||||
/* HS USB Port 2 Power */
|
||||
hsusb2_power: hsusb2_power_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "hsusb2_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 2 */
|
||||
hsusb2_phy: hsusb2_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>; /* gpio_183 */
|
||||
vcc-supply = <&hsusb2_power>;
|
||||
};
|
||||
|
||||
/* Regulator to trigger the nPoweron signal of the Wifi module */
|
||||
w3cbw003c_npoweron: regulator-w3cbw003c-npoweron {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-w3cbw003c-npoweron";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54: nPoweron */
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
/* Regulator to trigger the nReset signal of the Wifi module */
|
||||
w3cbw003c_wifi_nreset: regulator-w3cbw003c-wifi-nreset {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&w3cbw003c_pins &w3cbw003c_2_pins>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-w3cbw003c-wifi-nreset";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio1 16 GPIO_ACTIVE_HIGH>; /* gpio_16: WiFi nReset */
|
||||
startup-delay-us = <10000>;
|
||||
};
|
||||
|
||||
/* Regulator to trigger the nReset signal of the Bluetooth module */
|
||||
w3cbw003c_bt_nreset: regulator-w3cbw003c-bt-nreset {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-w3cbw003c-bt-nreset";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164: BT nReset */
|
||||
startup-delay-us = <10000>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusb2_pins
|
||||
>;
|
||||
|
||||
uart2_pins: pinmux_uart2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
|
||||
OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
|
||||
OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
|
||||
OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
|
||||
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
||||
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */
|
||||
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
/* WiFi/BT combo */
|
||||
w3cbw003c_pins: pinmux_w3cbw003c_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
||||
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
|
||||
>;
|
||||
};
|
||||
|
||||
hsusb2_pins: pinmux_hsusb2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi1_cs3.hsusb2_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x21d6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_clk.hsusb2_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x21d8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_simo.hsusb2_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_somi.hsusb2_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs0.hsusb2_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x21de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcspi2_cs1.hsusb2_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
|
||||
OMAP3_CORE1_IOPAD(0x21c0, PIN_OUTPUT | MUX_MODE4) /* i2c2_sda.gpio_183 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <2600000>;
|
||||
|
||||
twl: twl@48 {
|
||||
reg = <0x48>;
|
||||
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
twl_audio: audio {
|
||||
compatible = "ti,twl4030-audio";
|
||||
codec {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
#include "twl4030.dtsi"
|
||||
#include "twl4030_omap3.dtsi"
|
||||
|
||||
/* i2c2 pins are used for gpio */
|
||||
&i2c2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/* on board microSD slot */
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmc1>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
/* optional on board WiFi */
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&w3cbw003c_npoweron>;
|
||||
vqmmc-supply = <&w3cbw003c_bt_nreset>;
|
||||
vmmc_aux-supply = <&w3cbw003c_wifi_nreset>;
|
||||
bus-width = <4>;
|
||||
cap-sdio-irq;
|
||||
non-removable;
|
||||
};
|
||||
|
||||
&twl_gpio {
|
||||
ti,use-leds;
|
||||
};
|
||||
|
||||
&usb_otg_hs {
|
||||
interface-type = <0>;
|
||||
usb-phy = <&usb2_phy>;
|
||||
phys = <&usb2_phy>;
|
||||
phy-names = "usb2-phy";
|
||||
mode = <3>;
|
||||
power = <50>;
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port2-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <0 &hsusb2_phy>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
@@ -0,0 +1,111 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* DVI output for some Gumstix Overo boards (Tobi and Summit)
|
||||
*/
|
||||
|
||||
&omap3_pmx_core {
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
|
||||
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
|
||||
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
|
||||
OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
|
||||
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
|
||||
OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
|
||||
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
|
||||
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
/* Needed to power the DPI pins */
|
||||
&vpll2 {
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&dss {
|
||||
status = "ok"
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&tfp410_in>;
|
||||
data-lines = <24>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
display0 = &dvi0;
|
||||
};
|
||||
|
||||
tfp410: encoder@0 {
|
||||
compatible = "ti,tfp410";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
tfp410_in: endpoint@0 {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
tfp410_out: endpoint@0 {
|
||||
remote-endpoint = <&dvi_connector_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
dvi0: connector@0 {
|
||||
compatible = "dvi-connector";
|
||||
label = "dvi";
|
||||
|
||||
digital;
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
|
||||
port {
|
||||
dvi_connector_in: endpoint {
|
||||
remote-endpoint = <&tfp410_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,95 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Peripherals common to all Gumstix Overo boards (Tobi, Summit, Palo43,...)
|
||||
*/
|
||||
|
||||
/ {
|
||||
lis33_3v3: lis33-3v3-reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lis33-3v3-reg";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
lis33_1v8: lis33-1v8-reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "lis33-1v8-reg";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
|
||||
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */
|
||||
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
clock-frequency = <100000>;
|
||||
|
||||
/* optional 1K EEPROM with revision information */
|
||||
eeprom@51 {
|
||||
compatible = "atmel,24c01";
|
||||
reg = <0x51>;
|
||||
pagesize = <8>;
|
||||
};
|
||||
|
||||
lis33de: lis33de@1d {
|
||||
compatible = "st,lis33de", "st,lis3lv02d";
|
||||
reg = <0x1d>;
|
||||
Vdd-supply = <&lis33_1v8>;
|
||||
Vdd_IO-supply = <&lis33_3v3>;
|
||||
|
||||
st,click-single-x;
|
||||
st,click-single-y;
|
||||
st,click-single-z;
|
||||
st,click-thresh-x = <10>;
|
||||
st,click-thresh-y = <10>;
|
||||
st,click-thresh-z = <10>;
|
||||
st,irq1-click;
|
||||
st,irq2-click;
|
||||
st,wakeup-x-lo;
|
||||
st,wakeup-x-hi;
|
||||
st,wakeup-y-lo;
|
||||
st,wakeup-y-hi;
|
||||
st,wakeup-z-lo;
|
||||
st,wakeup-z-hi;
|
||||
st,min-limit-x = <120>;
|
||||
st,min-limit-y = <120>;
|
||||
st,min-limit-z = <140>;
|
||||
st,max-limit-x = <550>;
|
||||
st,max-limit-y = <550>;
|
||||
st,max-limit-z = <750>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
@@ -0,0 +1,42 @@
|
||||
/*
|
||||
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Tobi expansion board is manufactured by Gumstix Inc.
|
||||
*/
|
||||
|
||||
#include "omap3-overo-common-peripherals.dtsi"
|
||||
#include "omap3-overo-common-dvi.dtsi"
|
||||
|
||||
/ {
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
heartbeat {
|
||||
label = "overo:red:gpio21";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
#include "omap-gpmc-smsc9221.dtsi"
|
||||
|
||||
&gpmc {
|
||||
ranges = <5 0 0x2c000000 0x1000000>; /* CS5 */
|
||||
|
||||
ethernet@gpmc {
|
||||
reg = <5 0 0xff>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
|
||||
};
|
||||
};
|
||||
|
||||
&lis33de {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@@ -0,0 +1,22 @@
|
||||
/*
|
||||
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Tobi expansion board is manufactured by Gumstix Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap3-overo.dtsi"
|
||||
#include "omap3-overo-tobi-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OMAP35xx Gumstix Overo on Tobi";
|
||||
compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
|
||||
};
|
||||
|
||||
@@ -0,0 +1,38 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap3-overo-base.dtsi"
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <
|
||||
&hsusb2_2_pins
|
||||
>;
|
||||
|
||||
hsusb2_2_pins: pinmux_hsusb2_2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
|
||||
OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
|
||||
OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
|
||||
OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
|
||||
OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
|
||||
OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
|
||||
>;
|
||||
};
|
||||
|
||||
w3cbw003c_2_pins: pinmux_w3cbw003c_2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3430_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcbsp2 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -0,0 +1,56 @@
|
||||
/*
|
||||
* Device Tree Source for OMAP34xx/OMAP35xx SoC
|
||||
*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This file is licensed under the terms of the GNU General Public License
|
||||
* version 2. This program is licensed "as is" without any warranty of any
|
||||
* kind, whether express or implied.
|
||||
*/
|
||||
|
||||
#include "omap3.dtsi"
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu@0 {
|
||||
/* OMAP343x/OMAP35xx variants OPP1-5 */
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
125000 975000
|
||||
250000 1075000
|
||||
500000 1200000
|
||||
550000 1270000
|
||||
600000 1350000
|
||||
>;
|
||||
clock-latency = <300000>; /* From legacy driver */
|
||||
};
|
||||
};
|
||||
|
||||
ocp {
|
||||
omap3_pmx_core2: pinmux@480025d8 {
|
||||
compatible = "ti,omap3-padconf", "pinctrl-single";
|
||||
reg = <0x480025d8 0x24>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-controller;
|
||||
pinctrl-single,register-width = <16>;
|
||||
pinctrl-single,function-mask = <0xff1f>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi {
|
||||
status = "ok"
|
||||
|
||||
clocks = <&ssi_ssr_fck>,
|
||||
<&ssi_sst_fck>,
|
||||
<&ssi_ick>;
|
||||
clock-names = "ssi_ssr_fck",
|
||||
"ssi_sst_fck",
|
||||
"ssi_ick";
|
||||
};
|
||||
|
||||
/include/ "omap34xx-omap36xx-clocks.dtsi"
|
||||
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
|
||||
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
|
||||
Reference in New Issue
Block a user