i2p/haiku-beta6
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Remove the wlan specific headers to allow a clearer distinction between

Browse Source 
ethernet and wlan drivers when compiling them. Also this removes the burden to
recompile every ethernet driver just because of changes in the wlan part.


git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@34306 a95241bf-73f2-0310-859d-f6bbb57e9c96
This commit is contained in:
Colin Günther
2009-11-27 12:13:10 +00:00
parent ae4d11e97f
commit da0be4bf3f
34 changed files with 9 additions and 7407 deletions
Download Patch File Download Diff File Expand all files Collapse all files
src/libs/compat/freebsd_network/compat/net80211/_ieee80211.h
-396
View File
@@ -1,396 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211__IEEE80211_H_
#define _FBSD_COMPAT_NET80211__IEEE80211_H_
/*
* 802.11 implementation definitions.
*
* NB: this file is used by applications.
*/
/*
* PHY type; mostly used to identify FH phys.
*/
enum ieee80211_phytype {
IEEE80211_T_DS, /* direct sequence spread spectrum */
IEEE80211_T_FH, /* frequency hopping */
IEEE80211_T_OFDM, /* frequency division multiplexing */
IEEE80211_T_TURBO, /* high rate OFDM, aka turbo mode */
IEEE80211_T_HT, /* high throughput */
IEEE80211_T_OFDM_HALF, /* 1/2 rate OFDM */
IEEE80211_T_OFDM_QUARTER, /* 1/4 rate OFDM */
};
#define IEEE80211_T_CCK IEEE80211_T_DS /* more common nomenclature */
/*
* PHY mode; this is not really a mode as multi-mode devices
* have multiple PHY's. Mode is mostly used as a shorthand
* for constraining which channels to consider in setting up
* operation. Modes used to be used more extensively when
* channels were identified as IEEE channel numbers.
*/
enum ieee80211_phymode {
IEEE80211_MODE_AUTO = 0, /* autoselect */
IEEE80211_MODE_11A = 1, /* 5GHz, OFDM */
IEEE80211_MODE_11B = 2, /* 2GHz, CCK */
IEEE80211_MODE_11G = 3, /* 2GHz, OFDM */
IEEE80211_MODE_FH = 4, /* 2GHz, GFSK */
IEEE80211_MODE_TURBO_A = 5, /* 5GHz, OFDM, 2x clock */
IEEE80211_MODE_TURBO_G = 6, /* 2GHz, OFDM, 2x clock */
IEEE80211_MODE_STURBO_A = 7, /* 5GHz, OFDM, 2x clock, static */
IEEE80211_MODE_11NA = 8, /* 5GHz, w/ HT */
IEEE80211_MODE_11NG = 9, /* 2GHz, w/ HT */
IEEE80211_MODE_HALF = 10, /* OFDM, 1/2x clock */
IEEE80211_MODE_QUARTER = 11, /* OFDM, 1/4x clock */
};
#define IEEE80211_MODE_MAX (IEEE80211_MODE_QUARTER+1)
/*
* Operating mode. Devices do not necessarily support
* all modes; they indicate which are supported in their
* capabilities.
*/
enum ieee80211_opmode {
IEEE80211_M_IBSS = 0, /* IBSS (adhoc) station */
IEEE80211_M_STA = 1, /* infrastructure station */
IEEE80211_M_WDS = 2, /* WDS link */
IEEE80211_M_AHDEMO = 3, /* Old lucent compatible adhoc demo */
IEEE80211_M_HOSTAP = 4, /* Software Access Point */
IEEE80211_M_MONITOR = 5, /* Monitor mode */
IEEE80211_M_MBSS = 6, /* MBSS (Mesh Point) link */
};
#define IEEE80211_OPMODE_MAX (IEEE80211_M_MBSS+1)
/*
* 802.11g/802.11n protection mode.
*/
enum ieee80211_protmode {
IEEE80211_PROT_NONE = 0, /* no protection */
IEEE80211_PROT_CTSONLY = 1, /* CTS to self */
IEEE80211_PROT_RTSCTS = 2, /* RTS-CTS */
};
/*
* Authentication mode. The open and shared key authentication
* modes are implemented within the 802.11 layer. 802.1x and
* WPA/802.11i are implemented in user mode by setting the
* 802.11 layer into IEEE80211_AUTH_8021X and deferring
* authentication to user space programs.
*/
enum ieee80211_authmode {
IEEE80211_AUTH_NONE = 0,
IEEE80211_AUTH_OPEN = 1, /* open */
IEEE80211_AUTH_SHARED = 2, /* shared-key */
IEEE80211_AUTH_8021X = 3, /* 802.1x */
IEEE80211_AUTH_AUTO = 4, /* auto-select/accept */
/* NB: these are used only for ioctls */
IEEE80211_AUTH_WPA = 5, /* WPA/RSN w/ 802.1x/PSK */
};
/*
* Roaming mode is effectively who controls the operation
* of the 802.11 state machine when operating as a station.
* State transitions are controlled either by the driver
* (typically when management frames are processed by the
* hardware/firmware), the host (auto/normal operation of
* the 802.11 layer), or explicitly through ioctl requests
* when applications like wpa_supplicant want control.
*/
enum ieee80211_roamingmode {
IEEE80211_ROAMING_DEVICE= 0, /* driver/hardware control */
IEEE80211_ROAMING_AUTO = 1, /* 802.11 layer control */
IEEE80211_ROAMING_MANUAL= 2, /* application control */
};
/*
* Channels are specified by frequency and attributes.
*/
struct ieee80211_channel {
uint32_t ic_flags; /* see below */
uint16_t ic_freq; /* setting in Mhz */
uint8_t ic_ieee; /* IEEE channel number */
int8_t ic_maxregpower; /* maximum regulatory tx power in dBm */
int8_t ic_maxpower; /* maximum tx power in .5 dBm */
int8_t ic_minpower; /* minimum tx power in .5 dBm */
uint8_t ic_state; /* dynamic state */
uint8_t ic_extieee; /* HT40 extension channel number */
int8_t ic_maxantgain; /* maximum antenna gain in .5 dBm */
uint8_t ic_pad;
uint16_t ic_devdata; /* opaque device/driver data */
};
#define IEEE80211_CHAN_MAX 256
#define IEEE80211_CHAN_BYTES 32 /* howmany(IEEE80211_CHAN_MAX, NBBY) */
#define IEEE80211_CHAN_ANY 0xffff /* token for ``any channel'' */
#define IEEE80211_CHAN_ANYC \
((struct ieee80211_channel *) IEEE80211_CHAN_ANY)
/* channel attributes */
#define IEEE80211_CHAN_PRIV0 0x00000001 /* driver private bit 0 */
#define IEEE80211_CHAN_PRIV1 0x00000002 /* driver private bit 1 */
#define IEEE80211_CHAN_PRIV2 0x00000004 /* driver private bit 2 */
#define IEEE80211_CHAN_PRIV3 0x00000008 /* driver private bit 3 */
#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */
#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */
#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */
#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */
#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */
#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */
#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */
#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */
#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */
#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */
#define IEEE80211_CHAN_HT20 0x00010000 /* HT 20 channel */
#define IEEE80211_CHAN_HT40U 0x00020000 /* HT 40 channel w/ ext above */
#define IEEE80211_CHAN_HT40D 0x00040000 /* HT 40 channel w/ ext below */
#define IEEE80211_CHAN_DFS 0x00080000 /* DFS required */
#define IEEE80211_CHAN_4MSXMIT 0x00100000 /* 4ms limit on frame length */
#define IEEE80211_CHAN_NOADHOC 0x00200000 /* adhoc mode not allowed */
#define IEEE80211_CHAN_NOHOSTAP 0x00400000 /* hostap mode not allowed */
#define IEEE80211_CHAN_11D 0x00800000 /* 802.11d required */
#define IEEE80211_CHAN_HT40 (IEEE80211_CHAN_HT40U | IEEE80211_CHAN_HT40D)
#define IEEE80211_CHAN_HT (IEEE80211_CHAN_HT20 | IEEE80211_CHAN_HT40)
#define IEEE80211_CHAN_BITS \
"\20\1PRIV0\2PRIV2\3PRIV3\4PRIV4\5TURBO\6CCK\7OFDM\0102GHZ\0115GHZ" \
"\12PASSIVE\13DYN\14GFSK\15GSM\16STURBO\17HALF\20QUARTER\21HT20" \
"\22HT40U\23HT40D\24DFS\0254MSXMIT\26NOADHOC\27NOHOSTAP\03011D"
/*
* Useful combinations of channel characteristics.
*/
#define IEEE80211_CHAN_FHSS \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_GFSK)
#define IEEE80211_CHAN_A \
(IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_B \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_CCK)
#define IEEE80211_CHAN_PUREG \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_OFDM)
#define IEEE80211_CHAN_G \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_DYN)
#define IEEE80211_CHAN_108A \
(IEEE80211_CHAN_A | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_108G \
(IEEE80211_CHAN_PUREG | IEEE80211_CHAN_TURBO)
#define IEEE80211_CHAN_ST \
(IEEE80211_CHAN_108A | IEEE80211_CHAN_STURBO)
#define IEEE80211_CHAN_ALL \
(IEEE80211_CHAN_2GHZ | IEEE80211_CHAN_5GHZ | IEEE80211_CHAN_GFSK | \
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN | \
IEEE80211_CHAN_HALF | IEEE80211_CHAN_QUARTER | \
IEEE80211_CHAN_HT)
#define IEEE80211_CHAN_ALLTURBO \
(IEEE80211_CHAN_ALL | IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)
#define IEEE80211_IS_CHAN_FHSS(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_FHSS) == IEEE80211_CHAN_FHSS)
#define IEEE80211_IS_CHAN_A(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_A) == IEEE80211_CHAN_A)
#define IEEE80211_IS_CHAN_B(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_B) == IEEE80211_CHAN_B)
#define IEEE80211_IS_CHAN_PUREG(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_PUREG) == IEEE80211_CHAN_PUREG)
#define IEEE80211_IS_CHAN_G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_G) == IEEE80211_CHAN_G)
#define IEEE80211_IS_CHAN_ANYG(_c) \
(IEEE80211_IS_CHAN_PUREG(_c) || IEEE80211_IS_CHAN_G(_c))
#define IEEE80211_IS_CHAN_ST(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_ST) == IEEE80211_CHAN_ST)
#define IEEE80211_IS_CHAN_108A(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_108A) == IEEE80211_CHAN_108A)
#define IEEE80211_IS_CHAN_108G(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_108G) == IEEE80211_CHAN_108G)
#define IEEE80211_IS_CHAN_2GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_2GHZ) != 0)
#define IEEE80211_IS_CHAN_5GHZ(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_5GHZ) != 0)
#define IEEE80211_IS_CHAN_PASSIVE(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_PASSIVE) != 0)
#define IEEE80211_IS_CHAN_OFDM(_c) \
(((_c)->ic_flags & (IEEE80211_CHAN_OFDM | IEEE80211_CHAN_DYN)) != 0)
#define IEEE80211_IS_CHAN_CCK(_c) \
(((_c)->ic_flags & (IEEE80211_CHAN_CCK | IEEE80211_CHAN_DYN)) != 0)
#define IEEE80211_IS_CHAN_GFSK(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GFSK) != 0)
#define IEEE80211_IS_CHAN_TURBO(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_TURBO) != 0)
#define IEEE80211_IS_CHAN_STURBO(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_STURBO) != 0)
#define IEEE80211_IS_CHAN_DTURBO(_c) \
(((_c)->ic_flags & \
(IEEE80211_CHAN_TURBO | IEEE80211_CHAN_STURBO)) == IEEE80211_CHAN_TURBO)
#define IEEE80211_IS_CHAN_HALF(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HALF) != 0)
#define IEEE80211_IS_CHAN_QUARTER(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_QUARTER) != 0)
#define IEEE80211_IS_CHAN_FULL(_c) \
(((_c)->ic_flags & (IEEE80211_CHAN_QUARTER | IEEE80211_CHAN_HALF)) == 0)
#define IEEE80211_IS_CHAN_GSM(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_GSM) != 0)
#define IEEE80211_IS_CHAN_HT(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_HT20(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT20) != 0)
#define IEEE80211_IS_CHAN_HT40(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40) != 0)
#define IEEE80211_IS_CHAN_HT40U(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40U) != 0)
#define IEEE80211_IS_CHAN_HT40D(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_HT40D) != 0)
#define IEEE80211_IS_CHAN_HTA(_c) \
(IEEE80211_IS_CHAN_5GHZ(_c) && \
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_HTG(_c) \
(IEEE80211_IS_CHAN_2GHZ(_c) && \
((_c)->ic_flags & IEEE80211_CHAN_HT) != 0)
#define IEEE80211_IS_CHAN_DFS(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_DFS) != 0)
#define IEEE80211_IS_CHAN_NOADHOC(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_NOADHOC) != 0)
#define IEEE80211_IS_CHAN_NOHOSTAP(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_NOHOSTAP) != 0)
#define IEEE80211_IS_CHAN_11D(_c) \
(((_c)->ic_flags & IEEE80211_CHAN_11D) != 0)
#define IEEE80211_CHAN2IEEE(_c) (_c)->ic_ieee
/* dynamic state */
#define IEEE80211_CHANSTATE_RADAR 0x01 /* radar detected */
#define IEEE80211_CHANSTATE_CACDONE 0x02 /* CAC completed */
#define IEEE80211_CHANSTATE_CWINT 0x04 /* interference detected */
#define IEEE80211_CHANSTATE_NORADAR 0x10 /* post notify on radar clear */
#define IEEE80211_IS_CHAN_RADAR(_c) \
(((_c)->ic_state & IEEE80211_CHANSTATE_RADAR) != 0)
#define IEEE80211_IS_CHAN_CACDONE(_c) \
(((_c)->ic_state & IEEE80211_CHANSTATE_CACDONE) != 0)
#define IEEE80211_IS_CHAN_CWINT(_c) \
(((_c)->ic_state & IEEE80211_CHANSTATE_CWINT) != 0)
/* ni_chan encoding for FH phy */
#define IEEE80211_FH_CHANMOD 80
#define IEEE80211_FH_CHAN(set,pat) (((set)-1)*IEEE80211_FH_CHANMOD+(pat))
#define IEEE80211_FH_CHANSET(chan) ((chan)/IEEE80211_FH_CHANMOD+1)
#define IEEE80211_FH_CHANPAT(chan) ((chan)%IEEE80211_FH_CHANMOD)
#define IEEE80211_TID_SIZE (WME_NUM_TID+1) /* WME TID's +1 for non-QoS */
#define IEEE80211_NONQOS_TID WME_NUM_TID /* index for non-QoS sta */
/*
* The 802.11 spec says at most 2007 stations may be
* associated at once. For most AP's this is way more
* than is feasible so we use a default of 128. This
* number may be overridden by the driver and/or by
* user configuration but may not be less than IEEE80211_AID_MIN.
*/
#define IEEE80211_AID_DEF 128
#define IEEE80211_AID_MIN 16
/*
* 802.11 rate set.
*/
#define IEEE80211_RATE_SIZE 8 /* 802.11 standard */
#define IEEE80211_RATE_MAXSIZE 15 /* max rates we'll handle */
struct ieee80211_rateset {
uint8_t rs_nrates;
uint8_t rs_rates[IEEE80211_RATE_MAXSIZE];
};
/*
* 802.11n variant of ieee80211_rateset. Instead of
* legacy rates the entries are MCS rates. We define
* the structure such that it can be used interchangeably
* with an ieee80211_rateset (modulo structure size).
*/
#define IEEE80211_HTRATE_MAXSIZE 127
struct ieee80211_htrateset {
uint8_t rs_nrates;
uint8_t rs_rates[IEEE80211_HTRATE_MAXSIZE];
};
#define IEEE80211_RATE_MCS 0x80
/*
* Per-mode transmit parameters/controls visible to user space.
* These can be used to set fixed transmit rate for all operating
* modes or on a per-client basis according to the capabilities
* of the client (e.g. an 11b client associated to an 11g ap).
*
* MCS are distinguished from legacy rates by or'ing in 0x80.
*/
struct ieee80211_txparam {
uint8_t ucastrate; /* ucast data rate (legacy/MCS|0x80) */
uint8_t mgmtrate; /* mgmt frame rate (legacy/MCS|0x80) */
uint8_t mcastrate; /* multicast rate (legacy/MCS|0x80) */
uint8_t maxretry; /* max unicast data retry count */
};
/*
* Per-mode roaming state visible to user space. There are two
* thresholds that control whether roaming is considered; when
* either is exceeded the 802.11 layer will check the scan cache
* for another AP. If the cache is stale then a scan may be
* triggered.
*/
struct ieee80211_roamparam {
int8_t rssi; /* rssi thresh (.5 dBm) */
uint8_t rate; /* tx rate thresh (.5 Mb/s or MCS) */
uint16_t pad; /* reserve */
};
/*
* Regulatory Information.
*/
struct ieee80211_regdomain {
uint16_t regdomain; /* SKU */
uint16_t country; /* ISO country code */
uint8_t location; /* I (indoor), O (outdoor), other */
uint8_t ecm; /* Extended Channel Mode */
char isocc[2]; /* country code string */
short pad[2];
};
/*
* MIMO antenna/radio state.
*/
struct ieee80211_mimo_info {
int8_t rssi[3]; /* per-antenna rssi */
int8_t noise[3]; /* per-antenna noise floor */
uint8_t pad[2];
uint32_t evm[3]; /* EVM data */
};
#endif /* _FBSD_COMPAT_NET80211__IEEE80211_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211.h
-1085
View File
File diff suppressed because it is too large Load Diff
src/libs/compat/freebsd_network/compat/net80211/ieee80211_action.h
-52
View File
@@ -1,52 +0,0 @@
/*-
* Copyright (c) 2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_ACTION_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_ACTION_H_
/*
* 802.11 send/recv action frame support.
*/
struct ieee80211_node;
struct ieee80211_frame;
typedef int ieee80211_send_action_func(struct ieee80211_node *,
int, int, void *);
int ieee80211_send_action_register(int cat, int act,
ieee80211_send_action_func *f);
void ieee80211_send_action_unregister(int cat, int act);
int ieee80211_send_action(struct ieee80211_node *, int, int, void *);
typedef int ieee80211_recv_action_func(struct ieee80211_node *,
const struct ieee80211_frame *, const uint8_t *, const uint8_t *);
int ieee80211_recv_action_register(int cat, int act,
ieee80211_recv_action_func *);
void ieee80211_recv_action_unregister(int cat, int act);
int ieee80211_recv_action(struct ieee80211_node *,
const struct ieee80211_frame *,
const uint8_t *, const uint8_t *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_ACTION_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_adhoc.h
-35
View File
@@ -1,35 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_ADHOC_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_ADHOC_H_
/*
* Adhoc-mode (ibss+ahdemo) implementation definitions.
*/
void ieee80211_adhoc_attach(struct ieee80211com *);
void ieee80211_adhoc_detach(struct ieee80211com *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_STA_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_ageq.h
-54
View File
@@ -1,54 +0,0 @@
/*-
* Copyright (c) 2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_STAGEQ_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_STAGEQ_H_
struct ieee80211_node;
struct mbuf;
struct ieee80211_ageq {
ieee80211_ageq_lock_t aq_lock;
int aq_len; /* # items on queue */
int aq_maxlen; /* max queue length */
int aq_drops; /* frames dropped */
struct mbuf *aq_head; /* frames linked w/ m_nextpkt */
struct mbuf *aq_tail; /* last frame in queue */
};
void ieee80211_ageq_init(struct ieee80211_ageq *, int maxlen,
const char *name);
void ieee80211_ageq_cleanup(struct ieee80211_ageq *);
void ieee80211_ageq_mfree(struct mbuf *);
int ieee80211_ageq_append(struct ieee80211_ageq *, struct mbuf *,
int age);
void ieee80211_ageq_drain(struct ieee80211_ageq *);
void ieee80211_ageq_drain_node(struct ieee80211_ageq *,
struct ieee80211_node *);
struct mbuf *ieee80211_ageq_age(struct ieee80211_ageq *, int quanta);
struct mbuf *ieee80211_ageq_remove(struct ieee80211_ageq *,
struct ieee80211_node *match);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_STAGEQ_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_amrr.h
-101
View File
@@ -1,101 +0,0 @@
/* $FreeBSD$ */
/* $OpenBSD: ieee80211_amrr.h,v 1.3 2006/06/17 19:34:31 damien Exp $ */
/*-
* Copyright (c) 2006
* Damien Bergamini <[email protected]>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_AMRR_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_AMRR_H_
/*-
* Naive implementation of the Adaptive Multi Rate Retry algorithm:
*
* "IEEE 802.11 Rate Adaptation: A Practical Approach"
* Mathieu Lacage, Hossein Manshaei, Thierry Turletti
* INRIA Sophia - Projet Planete
* http://www-sop.inria.fr/rapports/sophia/RR-5208.html
*/
/*
* Rate control settings.
*/
struct ieee80211vap;
struct ieee80211_amrr {
u_int amrr_min_success_threshold;
u_int amrr_max_success_threshold;
int amrr_interval; /* update interval (ticks) */
};
#define IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD 1
#define IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD 15
/*
* Rate control state for a given node.
*/
struct ieee80211_amrr_node {
struct ieee80211_amrr *amn_amrr;/* backpointer */
int amn_rix; /* current rate index */
int amn_ticks; /* time of last update */
/* statistics */
u_int amn_txcnt;
u_int amn_success;
u_int amn_success_threshold;
u_int amn_recovery;
u_int amn_retrycnt;
};
void ieee80211_amrr_init(struct ieee80211_amrr *, struct ieee80211vap *,
int, int, int);
void ieee80211_amrr_cleanup(struct ieee80211_amrr *);
void ieee80211_amrr_setinterval(struct ieee80211_amrr *, int);
void ieee80211_amrr_node_init(struct ieee80211_amrr *,
struct ieee80211_amrr_node *, struct ieee80211_node *);
int ieee80211_amrr_choose(struct ieee80211_node *,
struct ieee80211_amrr_node *);
#define IEEE80211_AMRR_SUCCESS 1
#define IEEE80211_AMRR_FAILURE 0
/*
* Update statistics with tx complete status. Ok is non-zero
* if the packet is known to be ACK'd. Retries has the number
* retransmissions (i.e. xmit attempts - 1).
*/
static __inline void
ieee80211_amrr_tx_complete(struct ieee80211_amrr_node *amn,
int ok, int retries)
{
amn->amn_txcnt++;
if (ok)
amn->amn_success++;
amn->amn_retrycnt += retries;
}
/*
* Set tx count/retry statistics explicitly. Intended for
* drivers that poll the device for statistics maintained
* in the device.
*/
static __inline void
ieee80211_amrr_tx_update(struct ieee80211_amrr_node *amn,
int txcnt, int success, int retrycnt)
{
amn->amn_txcnt = txcnt;
amn->amn_success = success;
amn->amn_retrycnt = retrycnt;
}
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_AMRR_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_crypto.h
-243
View File
@@ -1,243 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_CRYPTO_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_CRYPTO_H_
/*
* 802.11 protocol crypto-related definitions.
*/
#define IEEE80211_KEYBUF_SIZE 16
#define IEEE80211_MICBUF_SIZE (8+8) /* space for both tx+rx keys */
/*
* Old WEP-style key. Deprecated.
*/
struct ieee80211_wepkey {
u_int wk_len; /* key length in bytes */
uint8_t wk_key[IEEE80211_KEYBUF_SIZE];
};
struct ieee80211_rsnparms {
uint8_t rsn_mcastcipher; /* mcast/group cipher */
uint8_t rsn_mcastkeylen; /* mcast key length */
uint8_t rsn_ucastcipher; /* selected unicast cipher */
uint8_t rsn_ucastkeylen; /* unicast key length */
uint8_t rsn_keymgmt; /* selected key mgmt algo */
uint16_t rsn_caps; /* capabilities */
};
struct ieee80211_cipher;
/*
* Crypto key state. There is sufficient room for all supported
* ciphers (see below). The underlying ciphers are handled
* separately through loadable cipher modules that register with
* the generic crypto support. A key has a reference to an instance
* of the cipher; any per-key state is hung off wk_private by the
* cipher when it is attached. Ciphers are automatically called
* to detach and cleanup any such state when the key is deleted.
*
* The generic crypto support handles encap/decap of cipher-related
* frame contents for both hardware- and software-based implementations.
* A key requiring software crypto support is automatically flagged and
* the cipher is expected to honor this and do the necessary work.
* Ciphers such as TKIP may also support mixed hardware/software
* encrypt/decrypt and MIC processing.
*/
typedef uint16_t ieee80211_keyix; /* h/w key index */
struct ieee80211_key {
uint8_t wk_keylen; /* key length in bytes */
uint8_t wk_pad;
uint16_t wk_flags;
#define IEEE80211_KEY_XMIT 0x0001 /* key used for xmit */
#define IEEE80211_KEY_RECV 0x0002 /* key used for recv */
#define IEEE80211_KEY_GROUP 0x0004 /* key used for WPA group operation */
#define IEEE80211_KEY_SWENCRYPT 0x0010 /* host-based encrypt */
#define IEEE80211_KEY_SWDECRYPT 0x0020 /* host-based decrypt */
#define IEEE80211_KEY_SWENMIC 0x0040 /* host-based enmic */
#define IEEE80211_KEY_SWDEMIC 0x0080 /* host-based demic */
#define IEEE80211_KEY_DEVKEY 0x0100 /* device key request completed */
#define IEEE80211_KEY_CIPHER0 0x1000 /* cipher-specific action 0 */
#define IEEE80211_KEY_CIPHER1 0x2000 /* cipher-specific action 1 */
ieee80211_keyix wk_keyix; /* h/w key index */
ieee80211_keyix wk_rxkeyix; /* optional h/w rx key index */
uint8_t wk_key[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
#define wk_txmic wk_key+IEEE80211_KEYBUF_SIZE+0 /* XXX can't () right */
#define wk_rxmic wk_key+IEEE80211_KEYBUF_SIZE+8 /* XXX can't () right */
/* key receive sequence counter */
uint64_t wk_keyrsc[IEEE80211_TID_SIZE];
uint64_t wk_keytsc; /* key transmit sequence counter */
const struct ieee80211_cipher *wk_cipher;
void *wk_private; /* private cipher state */
uint8_t wk_macaddr[IEEE80211_ADDR_LEN];
};
#define IEEE80211_KEY_COMMON /* common flags passed in by apps */\
(IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV | IEEE80211_KEY_GROUP)
#define IEEE80211_KEY_DEVICE /* flags owned by device driver */\
(IEEE80211_KEY_DEVKEY|IEEE80211_KEY_CIPHER0|IEEE80211_KEY_CIPHER1)
#define IEEE80211_KEY_SWCRYPT \
(IEEE80211_KEY_SWENCRYPT | IEEE80211_KEY_SWDECRYPT)
#define IEEE80211_KEY_SWMIC (IEEE80211_KEY_SWENMIC | IEEE80211_KEY_SWDEMIC)
#define IEEE80211_KEY_BITS \
"\20\1XMIT\2RECV\3GROUP\4SWENCRYPT\5SWDECRYPT\6SWENMIC\7SWDEMIC" \
"\10DEVKEY\11CIPHER0\12CIPHER1"
#define IEEE80211_KEYIX_NONE ((ieee80211_keyix) -1)
/*
* NB: these values are ordered carefully; there are lots of
* of implications in any reordering. Beware that 4 is used
* only to indicate h/w TKIP MIC support in driver capabilities;
* there is no separate cipher support (it's rolled into the
* TKIP cipher support).
*/
#define IEEE80211_CIPHER_WEP 0
#define IEEE80211_CIPHER_TKIP 1
#define IEEE80211_CIPHER_AES_OCB 2
#define IEEE80211_CIPHER_AES_CCM 3
#define IEEE80211_CIPHER_TKIPMIC 4 /* TKIP MIC capability */
#define IEEE80211_CIPHER_CKIP 5
#define IEEE80211_CIPHER_NONE 6 /* pseudo value */
#define IEEE80211_CIPHER_MAX (IEEE80211_CIPHER_NONE+1)
/* capability bits in ic_cryptocaps/iv_cryptocaps */
#define IEEE80211_CRYPTO_WEP (1<<IEEE80211_CIPHER_WEP)
#define IEEE80211_CRYPTO_TKIP (1<<IEEE80211_CIPHER_TKIP)
#define IEEE80211_CRYPTO_AES_OCB (1<<IEEE80211_CIPHER_AES_OCB)
#define IEEE80211_CRYPTO_AES_CCM (1<<IEEE80211_CIPHER_AES_CCM)
#define IEEE80211_CRYPTO_TKIPMIC (1<<IEEE80211_CIPHER_TKIPMIC)
#define IEEE80211_CRYPTO_CKIP (1<<IEEE80211_CIPHER_CKIP)
#define IEEE80211_CRYPTO_BITS \
"\20\1WEP\2TKIP\3AES\4AES_CCM\5TKIPMIC\6CKIP"
#if defined(__KERNEL__) || defined(_KERNEL)
struct ieee80211com;
struct ieee80211vap;
struct ieee80211_node;
struct mbuf;
void ieee80211_crypto_attach(struct ieee80211com *);
void ieee80211_crypto_detach(struct ieee80211com *);
void ieee80211_crypto_vattach(struct ieee80211vap *);
void ieee80211_crypto_vdetach(struct ieee80211vap *);
int ieee80211_crypto_newkey(struct ieee80211vap *,
int cipher, int flags, struct ieee80211_key *);
int ieee80211_crypto_delkey(struct ieee80211vap *,
struct ieee80211_key *);
int ieee80211_crypto_setkey(struct ieee80211vap *, struct ieee80211_key *);
void ieee80211_crypto_delglobalkeys(struct ieee80211vap *);
void ieee80211_crypto_reload_keys(struct ieee80211com *);
/*
* Template for a supported cipher. Ciphers register with the
* crypto code and are typically loaded as separate modules
* (the null cipher is always present).
* XXX may need refcnts
*/
struct ieee80211_cipher {
const char *ic_name; /* printable name */
u_int ic_cipher; /* IEEE80211_CIPHER_* */
u_int ic_header; /* size of privacy header (bytes) */
u_int ic_trailer; /* size of privacy trailer (bytes) */
u_int ic_miclen; /* size of mic trailer (bytes) */
void* (*ic_attach)(struct ieee80211vap *, struct ieee80211_key *);
void (*ic_detach)(struct ieee80211_key *);
int (*ic_setkey)(struct ieee80211_key *);
int (*ic_encap)(struct ieee80211_key *, struct mbuf *,
uint8_t keyid);
int (*ic_decap)(struct ieee80211_key *, struct mbuf *, int);
int (*ic_enmic)(struct ieee80211_key *, struct mbuf *, int);
int (*ic_demic)(struct ieee80211_key *, struct mbuf *, int);
};
extern const struct ieee80211_cipher ieee80211_cipher_none;
#define IEEE80211_KEY_UNDEFINED(k) \
((k)->wk_cipher == &ieee80211_cipher_none)
void ieee80211_crypto_register(const struct ieee80211_cipher *);
void ieee80211_crypto_unregister(const struct ieee80211_cipher *);
int ieee80211_crypto_available(u_int cipher);
struct ieee80211_key *ieee80211_crypto_encap(struct ieee80211_node *,
struct mbuf *);
struct ieee80211_key *ieee80211_crypto_decap(struct ieee80211_node *,
struct mbuf *, int);
/*
* Check and remove any MIC.
*/
static __inline int
ieee80211_crypto_demic(struct ieee80211vap *vap, struct ieee80211_key *k,
struct mbuf *m, int force)
{
const struct ieee80211_cipher *cip = k->wk_cipher;
return (cip->ic_miclen > 0 ? cip->ic_demic(k, m, force) : 1);
}
/*
* Add any MIC.
*/
static __inline int
ieee80211_crypto_enmic(struct ieee80211vap *vap,
struct ieee80211_key *k, struct mbuf *m, int force)
{
const struct ieee80211_cipher *cip = k->wk_cipher;
return (cip->ic_miclen > 0 ? cip->ic_enmic(k, m, force) : 1);
}
/*
* Reset key state to an unused state. The crypto
* key allocation mechanism insures other state (e.g.
* key data) is properly setup before a key is used.
*/
static __inline void
ieee80211_crypto_resetkey(struct ieee80211vap *vap,
struct ieee80211_key *k, ieee80211_keyix ix)
{
k->wk_cipher = &ieee80211_cipher_none;
k->wk_private = k->wk_cipher->ic_attach(vap, k);
k->wk_keyix = k->wk_rxkeyix = ix;
k->wk_flags = IEEE80211_KEY_XMIT | IEEE80211_KEY_RECV;
}
/*
* Crypt-related notification methods.
*/
void ieee80211_notify_replay_failure(struct ieee80211vap *,
const struct ieee80211_frame *, const struct ieee80211_key *,
uint64_t rsc, int tid);
void ieee80211_notify_michael_failure(struct ieee80211vap *,
const struct ieee80211_frame *, u_int keyix);
#endif /* defined(__KERNEL__) || defined(_KERNEL) */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_CRYPTO_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_dfs.h
-57
View File
@@ -1,57 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_DFS_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_DFS_H_
/*
* 802.11h/DFS definitions.
*/
struct ieee80211_dfs_state {
int nol_event[IEEE80211_CHAN_MAX];
struct callout nol_timer; /* NOL list processing */
struct callout cac_timer; /* CAC timer */
struct timeval lastevent; /* time of last radar event */
int cureps; /* current events/second */
const struct ieee80211_channel *lastchan;/* chan w/ last radar event */
struct ieee80211_channel *newchan; /* chan selected next */
};
void ieee80211_dfs_attach(struct ieee80211com *);
void ieee80211_dfs_detach(struct ieee80211com *);
void ieee80211_dfs_reset(struct ieee80211com *);
void ieee80211_dfs_cac_start(struct ieee80211vap *);
void ieee80211_dfs_cac_stop(struct ieee80211vap *);
void ieee80211_dfs_cac_clear(struct ieee80211com *,
const struct ieee80211_channel *);
void ieee80211_dfs_notify_radar(struct ieee80211com *,
struct ieee80211_channel *);
struct ieee80211_channel *ieee80211_dfs_pickchannel(struct ieee80211com *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_DFS_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_haiku.h
-321
View File
@@ -1,321 +0,0 @@
/*-
* Copyright (c) 2003-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_HAIKU_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_HAIKU_H_
#ifdef _KERNEL
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>
/*
* Common state locking definitions.
*/
typedef struct {
char name[16]; /* e.g. "ath0_com_lock" */
struct mtx mtx;
} ieee80211_com_lock_t;
#define IEEE80211_LOCK_INIT(_ic, _name) do { \
ieee80211_com_lock_t *cl = &(_ic)->ic_comlock; \
snprintf(cl->name, sizeof(cl->name), "%s_com_lock", _name); \
mtx_init(&cl->mtx, cl->name, NULL, MTX_DEF | MTX_RECURSE); \
} while (0)
#define IEEE80211_LOCK_OBJ(_ic) (&(_ic)->ic_comlock.mtx)
#define IEEE80211_LOCK_DESTROY(_ic) mtx_destroy(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_LOCK(_ic) mtx_lock(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_UNLOCK(_ic) mtx_unlock(IEEE80211_LOCK_OBJ(_ic))
#define IEEE80211_LOCK_ASSERT(_ic) \
mtx_assert(IEEE80211_LOCK_OBJ(_ic), MA_OWNED)
/*
* Node locking definitions.
*/
typedef struct {
char name[16]; /* e.g. "ath0_node_lock" */
struct mtx mtx;
} ieee80211_node_lock_t;
#define IEEE80211_NODE_LOCK_INIT(_nt, _name) do { \
ieee80211_node_lock_t *nl = &(_nt)->nt_nodelock; \
snprintf(nl->name, sizeof(nl->name), "%s_node_lock", _name); \
mtx_init(&nl->mtx, nl->name, NULL, MTX_DEF | MTX_RECURSE); \
} while (0)
#define IEEE80211_NODE_LOCK_OBJ(_nt) (&(_nt)->nt_nodelock.mtx)
#define IEEE80211_NODE_LOCK_DESTROY(_nt) \
mtx_destroy(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_LOCK(_nt) \
mtx_lock(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_IS_LOCKED(_nt) \
mtx_owned(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_UNLOCK(_nt) \
mtx_unlock(IEEE80211_NODE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_LOCK_ASSERT(_nt) \
mtx_assert(IEEE80211_NODE_LOCK_OBJ(_nt), MA_OWNED)
/*
* Node table iteration locking definitions; this protects the
* scan generation # used to iterate over the station table
* while grabbing+releasing the node lock.
*/
typedef struct {
char name[16]; /* e.g. "ath0_scan_lock" */
struct mtx mtx;
} ieee80211_scan_lock_t;
#define IEEE80211_NODE_ITERATE_LOCK_INIT(_nt, _name) do { \
ieee80211_scan_lock_t *sl = &(_nt)->nt_scanlock; \
snprintf(sl->name, sizeof(sl->name), "%s_scan_lock", _name); \
mtx_init(&sl->mtx, sl->name, NULL, MTX_DEF); \
} while (0)
#define IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt) (&(_nt)->nt_scanlock.mtx)
#define IEEE80211_NODE_ITERATE_LOCK_DESTROY(_nt) \
mtx_destroy(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_ITERATE_LOCK(_nt) \
mtx_lock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
#define IEEE80211_NODE_ITERATE_UNLOCK(_nt) \
mtx_unlock(IEEE80211_NODE_ITERATE_LOCK_OBJ(_nt))
/*
* Power-save queue definitions.
*/
typedef struct mtx ieee80211_psq_lock_t;
#define IEEE80211_PSQ_INIT(_psq, _name) \
mtx_init(&(_psq)->psq_lock, _name, "802.11 ps q", MTX_DEF)
#define IEEE80211_PSQ_DESTROY(_psq) mtx_destroy(&(_psq)->psq_lock)
#define IEEE80211_PSQ_LOCK(_psq) mtx_lock(&(_psq)->psq_lock)
#define IEEE80211_PSQ_UNLOCK(_psq) mtx_unlock(&(_psq)->psq_lock)
#ifndef IF_PREPEND_LIST
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
(mtail)->m_nextpkt = (ifq)->ifq_head; \
if ((ifq)->ifq_tail == NULL) \
(ifq)->ifq_tail = (mtail); \
(ifq)->ifq_head = (mhead); \
(ifq)->ifq_len += (mcount); \
} while (0)
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
IF_LOCK(ifq); \
_IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \
IF_UNLOCK(ifq); \
} while (0)
#endif /* IF_PREPEND_LIST */
/*
* Age queue definitions.
*/
typedef struct mtx ieee80211_ageq_lock_t;
#define IEEE80211_AGEQ_INIT(_aq, _name) \
mtx_init(&(_aq)->aq_lock, _name, "802.11 age q", MTX_DEF)
#define IEEE80211_AGEQ_DESTROY(_aq) mtx_destroy(&(_aq)->aq_lock)
#define IEEE80211_AGEQ_LOCK(_aq) mtx_lock(&(_aq)->aq_lock)
#define IEEE80211_AGEQ_UNLOCK(_aq) mtx_unlock(&(_aq)->aq_lock)
/*
* Node reference counting definitions.
*
* ieee80211_node_initref initialize the reference count to 1
* ieee80211_node_incref add a reference
* ieee80211_node_decref remove a reference
* ieee80211_node_dectestref remove a reference and return 1 if this
* is the last reference, otherwise 0
* ieee80211_node_refcnt reference count for printing (only)
*/
#include <machine/atomic.h>
#define ieee80211_node_initref(_ni) \
do { ((_ni)->ni_refcnt = 1); } while (0)
#define ieee80211_node_incref(_ni) \
atomic_add_int(&(_ni)->ni_refcnt, 1)
#define ieee80211_node_decref(_ni) \
atomic_subtract_int(&(_ni)->ni_refcnt, 1)
struct ieee80211_node;
int ieee80211_node_dectestref(struct ieee80211_node *ni);
#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt
struct ifqueue;
struct ieee80211vap;
void ieee80211_drain_ifq(struct ifqueue *);
void ieee80211_flush_ifq(struct ifqueue *, struct ieee80211vap *);
void ieee80211_vap_destroy(struct ieee80211vap *);
#define IFNET_IS_UP_RUNNING(_ifp) \
(((_ifp)->if_flags & IFF_UP) && \
((_ifp)->if_drv_flags & IFF_DRV_RUNNING))
#define msecs_to_ticks(ms) (((ms)*hz)/1000)
#define ticks_to_msecs(t) (1000*(t) / hz)
#define ticks_to_secs(t) ((t) / hz)
#define time_after(a,b) ((long long)(b) - (long long)(a) < 0)
#define time_before(a,b) time_after(b,a)
#define time_after_eq(a,b) ((long long)(a) - (long long)(b) >= 0)
#define time_before_eq(a,b) time_after_eq(b,a)
struct mbuf *ieee80211_getmgtframe(uint8_t **frm, int headroom, int pktlen);
/* tx path usage */
#define M_ENCAP M_PROTO1 /* 802.11 encap done */
#define M_EAPOL M_PROTO3 /* PAE/EAPOL frame */
#define M_PWR_SAV M_PROTO4 /* bypass PS handling */
#define M_MORE_DATA M_PROTO5 /* more data frames to follow */
#define M_FF M_PROTO6 /* fast frame */
#define M_TXCB M_PROTO7 /* do tx complete callback */
#define M_AMPDU_MPDU M_PROTO8 /* ok for A-MPDU aggregation */
#define M_80211_TX \
(M_FRAG|M_FIRSTFRAG|M_LASTFRAG|M_ENCAP|M_EAPOL|M_PWR_SAV|\
M_MORE_DATA|M_FF|M_TXCB|M_AMPDU_MPDU)
/* rx path usage */
#define M_AMPDU M_PROTO1 /* A-MPDU subframe */
#define M_WEP M_PROTO2 /* WEP done by hardware */
#if 0
#define M_AMPDU_MPDU M_PROTO8 /* A-MPDU re-order done */
#endif
#define M_80211_RX (M_AMPDU|M_WEP|M_AMPDU_MPDU)
/*
* Store WME access control bits in the vlan tag.
* This is safe since it's done after the packet is classified
* (where we use any previous tag) and because it's passed
* directly in to the driver and there's no chance someone
* else will clobber them on us.
*/
#define M_WME_SETAC(m, ac) \
((m)->m_pkthdr.ether_vtag = (ac))
#define M_WME_GETAC(m) ((m)->m_pkthdr.ether_vtag)
/*
* Mbufs on the power save queue are tagged with an age and
* timed out. We reuse the hardware checksum field in the
* mbuf packet header to store this data.
*/
#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v)
#define M_AGE_GET(m) (m->m_pkthdr.csum_data)
#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj)
/*
* Store the sequence number.
*/
#define M_SEQNO_SET(m, seqno) \
((m)->m_pkthdr.tso_segsz = (seqno))
#define M_SEQNO_GET(m) ((m)->m_pkthdr.tso_segsz)
#define MTAG_ABI_NET80211 1132948340 /* net80211 ABI */
struct ieee80211_cb {
void (*func)(struct ieee80211_node *, void *, int status);
void *arg;
};
#define NET80211_TAG_CALLBACK 0 /* xmit complete callback */
int ieee80211_add_callback(struct mbuf *m,
void (*func)(struct ieee80211_node *, void *, int), void *arg);
void ieee80211_process_callback(struct ieee80211_node *, struct mbuf *, int);
void get_random_bytes(void *, size_t);
struct ieee80211com;
void ieee80211_sysctl_attach(struct ieee80211com *);
void ieee80211_sysctl_detach(struct ieee80211com *);
void ieee80211_sysctl_vattach(struct ieee80211vap *);
void ieee80211_sysctl_vdetach(struct ieee80211vap *);
void ieee80211_load_module(const char *);
/*
* A "policy module" is an adjunct module to net80211 that provides
* functionality that typically includes policy decisions. This
* modularity enables extensibility and vendor-supplied functionality.
*/
#define _IEEE80211_POLICY_MODULE(policy, name, version) \
typedef void (*policy##_setup)(int); \
SET_DECLARE(policy##_set, policy##_setup); \
/*
* Scanner modules provide scanning policy.
*/
#define IEEE80211_SCANNER_MODULE(name, version) \
_IEEE80211_POLICY_MODULE(scanner, name, version)
#define IEEE80211_SCANNER_ALG(name, alg, v) \
static void \
name##_modevent(int type) \
{ \
if (type == MOD_LOAD) \
ieee80211_scanner_register(alg, &v); \
else \
ieee80211_scanner_unregister(alg, &v); \
} \
TEXT_SET(scanner_set, name##_modevent); \
struct ieee80211req;
typedef int ieee80211_ioctl_getfunc(struct ieee80211vap *,
struct ieee80211req *);
SET_DECLARE(ieee80211_ioctl_getset, ieee80211_ioctl_getfunc);
#define IEEE80211_IOCTL_GET(_name, _get) TEXT_SET(ieee80211_ioctl_getset, _get)
typedef int ieee80211_ioctl_setfunc(struct ieee80211vap *,
struct ieee80211req *);
SET_DECLARE(ieee80211_ioctl_setset, ieee80211_ioctl_setfunc);
#define IEEE80211_IOCTL_SET(_name, _set) TEXT_SET(ieee80211_ioctl_setset, _set)
#endif /* _KERNEL */
/*
* Structure prepended to raw packets sent through the bpf
* interface when set to DLT_IEEE802_11_RADIO. This allows
* user applications to specify pretty much everything in
* an Atheros tx descriptor. XXX need to generalize.
*
* XXX cannot be more than 14 bytes as it is copied to a sockaddr's
* XXX sa_data area.
*/
struct ieee80211_bpf_params {
uint8_t ibp_vers; /* version */
#define IEEE80211_BPF_VERSION 0
uint8_t ibp_len; /* header length in bytes */
uint8_t ibp_flags;
#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */
#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */
#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */
#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */
#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */
#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */
#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */
uint8_t ibp_pri; /* WME/WMM AC+tx antenna */
uint8_t ibp_try0; /* series 1 try count */
uint8_t ibp_rate0; /* series 1 IEEE tx rate */
uint8_t ibp_power; /* tx power (device units) */
uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */
uint8_t ibp_try1; /* series 2 try count */
uint8_t ibp_rate1; /* series 2 IEEE tx rate */
uint8_t ibp_try2; /* series 3 try count */
uint8_t ibp_rate2; /* series 3 IEEE tx rate */
uint8_t ibp_try3; /* series 4 try count */
uint8_t ibp_rate3; /* series 4 IEEE tx rate */
};
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_HAIKU_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_hostap.h
-35
View File
@@ -1,35 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_HOSTAP_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_HOSTAP_H_
/*
* Hostap implementation definitions.
*/
void ieee80211_hostap_attach(struct ieee80211com *);
void ieee80211_hostap_detach(struct ieee80211com *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_HOSTAP_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_ht.h
-204
View File
@@ -1,204 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_HT_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_HT_H_
/*
* 802.11n protocol implementation definitions.
*/
void ieee80211_ht_init(void);
#define IEEE80211_AGGR_BAWMAX 64 /* max block ack window size */
/* threshold for aging overlapping non-HT bss */
#define IEEE80211_NONHT_PRESENT_AGE msecs_to_ticks(60*1000)
struct ieee80211_tx_ampdu {
struct ieee80211_node *txa_ni; /* back pointer */
u_short txa_flags;
#define IEEE80211_AGGR_IMMEDIATE 0x0001 /* BA policy */
#define IEEE80211_AGGR_XCHGPEND 0x0002 /* ADDBA response pending */
#define IEEE80211_AGGR_RUNNING 0x0004 /* ADDBA response received */
#define IEEE80211_AGGR_SETUP 0x0008 /* deferred state setup */
#define IEEE80211_AGGR_NAK 0x0010 /* peer NAK'd ADDBA request */
#define IEEE80211_AGGR_BARPEND 0x0020 /* BAR response pending */
uint8_t txa_ac;
uint8_t txa_token; /* dialog token */
int txa_lastsample; /* ticks @ last traffic sample */
int txa_pkts; /* packets over last sample interval */
int txa_avgpps; /* filtered traffic over window */
int txa_qbytes; /* data queued (bytes) */
short txa_qframes; /* data queued (frames) */
ieee80211_seq txa_start; /* BA window left edge */
ieee80211_seq txa_seqpending; /* new txa_start pending BAR response */
uint16_t txa_wnd; /* BA window size */
uint8_t txa_attempts; /* # ADDBA/BAR requests w/o a response*/
int txa_nextrequest;/* soonest to make next request */
struct callout txa_timer;
void *txa_private; /* driver-private storage */
uint64_t txa_pad[4];
};
/* return non-zero if AMPDU tx for the TID is running */
#define IEEE80211_AMPDU_RUNNING(tap) \
(((tap)->txa_flags & IEEE80211_AGGR_RUNNING) != 0)
/* return non-zero if AMPDU tx for the TID is running or started */
#define IEEE80211_AMPDU_REQUESTED(tap) \
(((tap)->txa_flags & \
(IEEE80211_AGGR_RUNNING|IEEE80211_AGGR_XCHGPEND|IEEE80211_AGGR_NAK)) != 0)
#define IEEE80211_AGGR_BITS \
"\20\1IMMEDIATE\2XCHGPEND\3RUNNING\4SETUP\5NAK"
/*
* Traffic estimator support. We estimate packets/sec for
* each AC that is setup for AMPDU or will potentially be
* setup for AMPDU. The traffic rate can be used to decide
* when AMPDU should be setup (according to a threshold)
* and is available for drivers to do things like cache
* eviction when only a limited number of BA streams are
* available and more streams are requested than available.
*/
static __inline void
ieee80211_txampdu_update_pps(struct ieee80211_tx_ampdu *tap)
{
/* NB: scale factor of 2 was picked heuristically */
tap->txa_avgpps = ((tap->txa_avgpps << 2) -
tap->txa_avgpps + tap->txa_pkts) >> 2;
}
/*
* Count a packet towards the pps estimate.
*/
static __inline void
ieee80211_txampdu_count_packet(struct ieee80211_tx_ampdu *tap)
{
/* XXX bound loop/do more crude estimate? */
while (ticks - tap->txa_lastsample >= hz) {
ieee80211_txampdu_update_pps(tap);
/* reset to start new sample interval */
tap->txa_pkts = 0;
if (tap->txa_avgpps == 0) {
tap->txa_lastsample = ticks;
break;
}
tap->txa_lastsample += hz;
}
tap->txa_pkts++;
}
/*
* Get the current pps estimate. If the average is out of
* date due to lack of traffic then we decay the estimate
* to account for the idle time.
*/
static __inline int
ieee80211_txampdu_getpps(struct ieee80211_tx_ampdu *tap)
{
/* XXX bound loop/do more crude estimate? */
while (ticks - tap->txa_lastsample >= hz) {
ieee80211_txampdu_update_pps(tap);
tap->txa_pkts = 0;
if (tap->txa_avgpps == 0) {
tap->txa_lastsample = ticks;
break;
}
tap->txa_lastsample += hz;
}
return tap->txa_avgpps;
}
struct ieee80211_rx_ampdu {
int rxa_flags;
int rxa_qbytes; /* data queued (bytes) */
short rxa_qframes; /* data queued (frames) */
ieee80211_seq rxa_seqstart;
ieee80211_seq rxa_start; /* start of current BA window */
uint16_t rxa_wnd; /* BA window size */
int rxa_age; /* age of oldest frame in window */
int rxa_nframes; /* frames since ADDBA */
struct mbuf *rxa_m[IEEE80211_AGGR_BAWMAX];
uint64_t rxa_pad[4];
};
void ieee80211_ht_attach(struct ieee80211com *);
void ieee80211_ht_detach(struct ieee80211com *);
void ieee80211_ht_vattach(struct ieee80211vap *);
void ieee80211_ht_vdetach(struct ieee80211vap *);
void ieee80211_ht_announce(struct ieee80211com *);
struct ieee80211_mcs_rates {
uint16_t ht20_rate_800ns;
uint16_t ht20_rate_400ns;
uint16_t ht40_rate_800ns;
uint16_t ht40_rate_400ns;
};
extern const struct ieee80211_mcs_rates ieee80211_htrates[16];
const struct ieee80211_htrateset *ieee80211_get_suphtrates(
struct ieee80211com *, const struct ieee80211_channel *);
struct ieee80211_node;
int ieee80211_setup_htrates(struct ieee80211_node *,
const uint8_t *htcap, int flags);
void ieee80211_setup_basic_htrates(struct ieee80211_node *,
const uint8_t *htinfo);
struct mbuf *ieee80211_decap_amsdu(struct ieee80211_node *, struct mbuf *);
int ieee80211_ampdu_reorder(struct ieee80211_node *, struct mbuf *);
void ieee80211_recv_bar(struct ieee80211_node *, struct mbuf *);
void ieee80211_ht_node_init(struct ieee80211_node *);
void ieee80211_ht_node_cleanup(struct ieee80211_node *);
void ieee80211_ht_node_age(struct ieee80211_node *);
struct ieee80211_channel *ieee80211_ht_adjust_channel(struct ieee80211com *,
struct ieee80211_channel *, int);
void ieee80211_ht_wds_init(struct ieee80211_node *);
void ieee80211_ht_node_join(struct ieee80211_node *);
void ieee80211_ht_node_leave(struct ieee80211_node *);
void ieee80211_htprot_update(struct ieee80211com *, int protmode);
void ieee80211_ht_timeout(struct ieee80211com *);
void ieee80211_parse_htcap(struct ieee80211_node *, const uint8_t *);
void ieee80211_parse_htinfo(struct ieee80211_node *, const uint8_t *);
void ieee80211_ht_updateparams(struct ieee80211_node *, const uint8_t *,
const uint8_t *);
void ieee80211_ht_updatehtcap(struct ieee80211_node *, const uint8_t *);
int ieee80211_ampdu_request(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
void ieee80211_ampdu_stop(struct ieee80211_node *,
struct ieee80211_tx_ampdu *, int);
int ieee80211_send_bar(struct ieee80211_node *, struct ieee80211_tx_ampdu *,
ieee80211_seq);
uint8_t *ieee80211_add_htcap(uint8_t *, struct ieee80211_node *);
uint8_t *ieee80211_add_htcap_vendor(uint8_t *, struct ieee80211_node *);
uint8_t *ieee80211_add_htinfo(uint8_t *, struct ieee80211_node *);
uint8_t *ieee80211_add_htinfo_vendor(uint8_t *, struct ieee80211_node *);
struct ieee80211_beacon_offsets;
void ieee80211_ht_update_beacon(struct ieee80211vap *,
struct ieee80211_beacon_offsets *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_HT_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_input.h
-160
View File
@@ -1,160 +0,0 @@
/*-
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_INPUT_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_INPUT_H_
/* Verify the existence and length of __elem or get out. */
#define IEEE80211_VERIFY_ELEMENT(__elem, __maxlen, _action) do { \
if ((__elem) == NULL) { \
IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \
wh, NULL, "%s", "no " #__elem ); \
vap->iv_stats.is_rx_elem_missing++; \
_action; \
} else if ((__elem)[1] > (__maxlen)) { \
IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \
wh, NULL, "bad " #__elem " len %d", (__elem)[1]); \
vap->iv_stats.is_rx_elem_toobig++; \
_action; \
} \
} while (0)
#define IEEE80211_VERIFY_LENGTH(_len, _minlen, _action) do { \
if ((_len) < (_minlen)) { \
IEEE80211_DISCARD(vap, IEEE80211_MSG_ELEMID, \
wh, NULL, "ie too short, got %d, expected %d", \
(_len), (_minlen)); \
vap->iv_stats.is_rx_elem_toosmall++; \
_action; \
} \
} while (0)
#ifdef IEEE80211_DEBUG
void ieee80211_ssid_mismatch(struct ieee80211vap *, const char *tag,
uint8_t mac[IEEE80211_ADDR_LEN], uint8_t *ssid);
#define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \
if ((_ssid)[1] != 0 && \
((_ssid)[1] != (_ni)->ni_esslen || \
memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \
if (ieee80211_msg_input(vap)) \
ieee80211_ssid_mismatch(vap, \
ieee80211_mgt_subtype_name[subtype >> \
IEEE80211_FC0_SUBTYPE_SHIFT], \
wh->i_addr2, _ssid); \
vap->iv_stats.is_rx_ssidmismatch++; \
_action; \
} \
} while (0)
#else /* !IEEE80211_DEBUG */
#define IEEE80211_VERIFY_SSID(_ni, _ssid, _action) do { \
if ((_ssid)[1] != 0 && \
((_ssid)[1] != (_ni)->ni_esslen || \
memcmp((_ssid) + 2, (_ni)->ni_essid, (_ssid)[1]) != 0)) { \
vap->iv_stats.is_rx_ssidmismatch++; \
_action; \
} \
} while (0)
#endif /* !IEEE80211_DEBUG */
/* unalligned little endian access */
#define LE_READ_2(p) \
((uint16_t) \
((((const uint8_t *)(p))[0] ) | \
(((const uint8_t *)(p))[1] << 8)))
#define LE_READ_4(p) \
((uint32_t) \
((((const uint8_t *)(p))[0] ) | \
(((const uint8_t *)(p))[1] << 8) | \
(((const uint8_t *)(p))[2] << 16) | \
(((const uint8_t *)(p))[3] << 24)))
static __inline int
iswpaoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((WPA_OUI_TYPE<<24)|WPA_OUI);
}
static __inline int
iswmeoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI);
}
static __inline int
iswmeparam(const uint8_t *frm)
{
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
frm[6] == WME_PARAM_OUI_SUBTYPE;
}
static __inline int
iswmeinfo(const uint8_t *frm)
{
return frm[1] > 5 && LE_READ_4(frm+2) == ((WME_OUI_TYPE<<24)|WME_OUI) &&
frm[6] == WME_INFO_OUI_SUBTYPE;
}
static __inline int
isatherosoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((ATH_OUI_TYPE<<24)|ATH_OUI);
}
static __inline int
istdmaoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((TDMA_OUI_TYPE<<24)|TDMA_OUI);
}
static __inline int
ishtcapoui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTCAP<<24)|BCM_OUI);
}
static __inline int
ishtinfooui(const uint8_t *frm)
{
return frm[1] > 3 && LE_READ_4(frm+2) == ((BCM_OUI_HTINFO<<24)|BCM_OUI);
}
void ieee80211_deliver_data(struct ieee80211vap *,
struct ieee80211_node *, struct mbuf *);
struct mbuf *ieee80211_defrag(struct ieee80211_node *,
struct mbuf *, int);
struct mbuf *ieee80211_realign(struct ieee80211vap *, struct mbuf *, size_t);
struct mbuf *ieee80211_decap(struct ieee80211vap *, struct mbuf *, int);
struct mbuf *ieee80211_decap1(struct mbuf *, int *);
int ieee80211_setup_rates(struct ieee80211_node *ni,
const uint8_t *rates, const uint8_t *xrates, int flags);
void ieee80211_send_error(struct ieee80211_node *,
const uint8_t mac[IEEE80211_ADDR_LEN], int subtype, int arg);
int ieee80211_alloc_challenge(struct ieee80211_node *);
int ieee80211_parse_beacon(struct ieee80211_node *, struct mbuf *,
struct ieee80211_scanparams *);
int ieee80211_parse_action(struct ieee80211_node *, struct mbuf *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_INPUT_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_ioctl.h
-857
View File
@@ -1,857 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_IOCTL_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_IOCTL_H_
/*
* IEEE 802.11 ioctls.
*/
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_crypto.h>
/*
* Per/node (station) statistics.
*/
struct ieee80211_nodestats {
uint32_t ns_rx_data; /* rx data frames */
uint32_t ns_rx_mgmt; /* rx management frames */
uint32_t ns_rx_ctrl; /* rx control frames */
uint32_t ns_rx_ucast; /* rx unicast frames */
uint32_t ns_rx_mcast; /* rx multi/broadcast frames */
uint64_t ns_rx_bytes; /* rx data count (bytes) */
uint64_t ns_rx_beacons; /* rx beacon frames */
uint32_t ns_rx_proberesp; /* rx probe response frames */
uint32_t ns_rx_dup; /* rx discard 'cuz dup */
uint32_t ns_rx_noprivacy; /* rx w/ wep but privacy off */
uint32_t ns_rx_wepfail; /* rx wep processing failed */
uint32_t ns_rx_demicfail; /* rx demic failed */
uint32_t ns_rx_decap; /* rx decapsulation failed */
uint32_t ns_rx_defrag; /* rx defragmentation failed */
uint32_t ns_rx_disassoc; /* rx disassociation */
uint32_t ns_rx_deauth; /* rx deauthentication */
uint32_t ns_rx_action; /* rx action */
uint32_t ns_rx_decryptcrc; /* rx decrypt failed on crc */
uint32_t ns_rx_unauth; /* rx on unauthorized port */
uint32_t ns_rx_unencrypted; /* rx unecrypted w/ privacy */
uint32_t ns_rx_drop; /* rx discard other reason */
uint32_t ns_tx_data; /* tx data frames */
uint32_t ns_tx_mgmt; /* tx management frames */
uint32_t ns_tx_ctrl; /* tx control frames */
uint32_t ns_tx_ucast; /* tx unicast frames */
uint32_t ns_tx_mcast; /* tx multi/broadcast frames */
uint64_t ns_tx_bytes; /* tx data count (bytes) */
uint32_t ns_tx_probereq; /* tx probe request frames */
uint32_t ns_tx_novlantag; /* tx discard 'cuz no tag */
uint32_t ns_tx_vlanmismatch; /* tx discard 'cuz bad tag */
uint32_t ns_ps_discard; /* ps discard 'cuz of age */
/* MIB-related state */
uint32_t ns_tx_assoc; /* [re]associations */
uint32_t ns_tx_assoc_fail; /* [re]association failures */
uint32_t ns_tx_auth; /* [re]authentications */
uint32_t ns_tx_auth_fail; /* [re]authentication failures*/
uint32_t ns_tx_deauth; /* deauthentications */
uint32_t ns_tx_deauth_code; /* last deauth reason */
uint32_t ns_tx_disassoc; /* disassociations */
uint32_t ns_tx_disassoc_code; /* last disassociation reason */
uint32_t ns_spare[8];
};
/*
* Summary statistics.
*/
struct ieee80211_stats {
uint32_t is_rx_badversion; /* rx frame with bad version */
uint32_t is_rx_tooshort; /* rx frame too short */
uint32_t is_rx_wrongbss; /* rx from wrong bssid */
uint32_t is_rx_dup; /* rx discard 'cuz dup */
uint32_t is_rx_wrongdir; /* rx w/ wrong direction */
uint32_t is_rx_mcastecho; /* rx discard 'cuz mcast echo */
uint32_t is_rx_notassoc; /* rx discard 'cuz sta !assoc */
uint32_t is_rx_noprivacy; /* rx w/ wep but privacy off */
uint32_t is_rx_unencrypted; /* rx w/o wep and privacy on */
uint32_t is_rx_wepfail; /* rx wep processing failed */
uint32_t is_rx_decap; /* rx decapsulation failed */
uint32_t is_rx_mgtdiscard; /* rx discard mgt frames */
uint32_t is_rx_ctl; /* rx ctrl frames */
uint32_t is_rx_beacon; /* rx beacon frames */
uint32_t is_rx_rstoobig; /* rx rate set truncated */
uint32_t is_rx_elem_missing; /* rx required element missing*/
uint32_t is_rx_elem_toobig; /* rx element too big */
uint32_t is_rx_elem_toosmall; /* rx element too small */
uint32_t is_rx_elem_unknown; /* rx element unknown */
uint32_t is_rx_badchan; /* rx frame w/ invalid chan */
uint32_t is_rx_chanmismatch; /* rx frame chan mismatch */
uint32_t is_rx_nodealloc; /* rx frame dropped */
uint32_t is_rx_ssidmismatch; /* rx frame ssid mismatch */
uint32_t is_rx_auth_unsupported; /* rx w/ unsupported auth alg */
uint32_t is_rx_auth_fail; /* rx sta auth failure */
uint32_t is_rx_auth_countermeasures;/* rx auth discard 'cuz CM */
uint32_t is_rx_assoc_bss; /* rx assoc from wrong bssid */
uint32_t is_rx_assoc_notauth; /* rx assoc w/o auth */
uint32_t is_rx_assoc_capmismatch;/* rx assoc w/ cap mismatch */
uint32_t is_rx_assoc_norate; /* rx assoc w/ no rate match */
uint32_t is_rx_assoc_badwpaie; /* rx assoc w/ bad WPA IE */
uint32_t is_rx_deauth; /* rx deauthentication */
uint32_t is_rx_disassoc; /* rx disassociation */
uint32_t is_rx_badsubtype; /* rx frame w/ unknown subtype*/
uint32_t is_rx_nobuf; /* rx failed for lack of buf */
uint32_t is_rx_decryptcrc; /* rx decrypt failed on crc */
uint32_t is_rx_ahdemo_mgt; /* rx discard ahdemo mgt frame*/
uint32_t is_rx_bad_auth; /* rx bad auth request */
uint32_t is_rx_unauth; /* rx on unauthorized port */
uint32_t is_rx_badkeyid; /* rx w/ incorrect keyid */
uint32_t is_rx_ccmpreplay; /* rx seq# violation (CCMP) */
uint32_t is_rx_ccmpformat; /* rx format bad (CCMP) */
uint32_t is_rx_ccmpmic; /* rx MIC check failed (CCMP) */
uint32_t is_rx_tkipreplay; /* rx seq# violation (TKIP) */
uint32_t is_rx_tkipformat; /* rx format bad (TKIP) */
uint32_t is_rx_tkipmic; /* rx MIC check failed (TKIP) */
uint32_t is_rx_tkipicv; /* rx ICV check failed (TKIP) */
uint32_t is_rx_badcipher; /* rx failed 'cuz key type */
uint32_t is_rx_nocipherctx; /* rx failed 'cuz key !setup */
uint32_t is_rx_acl; /* rx discard 'cuz acl policy */
uint32_t is_tx_nobuf; /* tx failed for lack of buf */
uint32_t is_tx_nonode; /* tx failed for no node */
uint32_t is_tx_unknownmgt; /* tx of unknown mgt frame */
uint32_t is_tx_badcipher; /* tx failed 'cuz key type */
uint32_t is_tx_nodefkey; /* tx failed 'cuz no defkey */
uint32_t is_tx_noheadroom; /* tx failed 'cuz no space */
uint32_t is_tx_fragframes; /* tx frames fragmented */
uint32_t is_tx_frags; /* tx fragments created */
uint32_t is_scan_active; /* active scans started */
uint32_t is_scan_passive; /* passive scans started */
uint32_t is_node_timeout; /* nodes timed out inactivity */
uint32_t is_crypto_nomem; /* no memory for crypto ctx */
uint32_t is_crypto_tkip; /* tkip crypto done in s/w */
uint32_t is_crypto_tkipenmic; /* tkip en-MIC done in s/w */
uint32_t is_crypto_tkipdemic; /* tkip de-MIC done in s/w */
uint32_t is_crypto_tkipcm; /* tkip counter measures */
uint32_t is_crypto_ccmp; /* ccmp crypto done in s/w */
uint32_t is_crypto_wep; /* wep crypto done in s/w */
uint32_t is_crypto_setkey_cipher;/* cipher rejected key */
uint32_t is_crypto_setkey_nokey; /* no key index for setkey */
uint32_t is_crypto_delkey; /* driver key delete failed */
uint32_t is_crypto_badcipher; /* unknown cipher */
uint32_t is_crypto_nocipher; /* cipher not available */
uint32_t is_crypto_attachfail; /* cipher attach failed */
uint32_t is_crypto_swfallback; /* cipher fallback to s/w */
uint32_t is_crypto_keyfail; /* driver key alloc failed */
uint32_t is_crypto_enmicfail; /* en-MIC failed */
uint32_t is_ibss_capmismatch; /* merge failed-cap mismatch */
uint32_t is_ibss_norate; /* merge failed-rate mismatch */
uint32_t is_ps_unassoc; /* ps-poll for unassoc. sta */
uint32_t is_ps_badaid; /* ps-poll w/ incorrect aid */
uint32_t is_ps_qempty; /* ps-poll w/ nothing to send */
uint32_t is_ff_badhdr; /* fast frame rx'd w/ bad hdr */
uint32_t is_ff_tooshort; /* fast frame rx decap error */
uint32_t is_ff_split; /* fast frame rx split error */
uint32_t is_ff_decap; /* fast frames decap'd */
uint32_t is_ff_encap; /* fast frames encap'd for tx */
uint32_t is_rx_badbintval; /* rx frame w/ bogus bintval */
uint32_t is_rx_demicfail; /* rx demic failed */
uint32_t is_rx_defrag; /* rx defragmentation failed */
uint32_t is_rx_mgmt; /* rx management frames */
uint32_t is_rx_action; /* rx action mgt frames */
uint32_t is_amsdu_tooshort; /* A-MSDU rx decap error */
uint32_t is_amsdu_split; /* A-MSDU rx split error */
uint32_t is_amsdu_decap; /* A-MSDU decap'd */
uint32_t is_amsdu_encap; /* A-MSDU encap'd for tx */
uint32_t is_ampdu_bar_bad; /* A-MPDU BAR out of window */
uint32_t is_ampdu_bar_oow; /* A-MPDU BAR before ADDBA */
uint32_t is_ampdu_bar_move; /* A-MPDU BAR moved window */
uint32_t is_ampdu_bar_rx; /* A-MPDU BAR frames handled */
uint32_t is_ampdu_rx_flush; /* A-MPDU frames flushed */
uint32_t is_ampdu_rx_oor; /* A-MPDU frames out-of-order */
uint32_t is_ampdu_rx_copy; /* A-MPDU frames copied down */
uint32_t is_ampdu_rx_drop; /* A-MPDU frames dropped */
uint32_t is_tx_badstate; /* tx discard state != RUN */
uint32_t is_tx_notassoc; /* tx failed, sta not assoc */
uint32_t is_tx_classify; /* tx classification failed */
uint32_t is_dwds_mcast; /* discard mcast over dwds */
uint32_t is_dwds_qdrop; /* dwds pending frame q full */
uint32_t is_ht_assoc_nohtcap; /* non-HT sta rejected */
uint32_t is_ht_assoc_downgrade; /* HT sta forced to legacy */
uint32_t is_ht_assoc_norate; /* HT assoc w/ rate mismatch */
uint32_t is_ampdu_rx_age; /* A-MPDU sent up 'cuz of age */
uint32_t is_ampdu_rx_move; /* A-MPDU MSDU moved window */
uint32_t is_addba_reject; /* ADDBA reject 'cuz disabled */
uint32_t is_addba_norequest; /* ADDBA response w/o ADDBA */
uint32_t is_addba_badtoken; /* ADDBA response w/ wrong
dialogtoken */
uint32_t is_addba_badpolicy; /* ADDBA resp w/ wrong policy */
uint32_t is_ampdu_stop; /* A-MPDU stream stopped */
uint32_t is_ampdu_stop_failed; /* A-MPDU stream not running */
uint32_t is_ampdu_rx_reorder; /* A-MPDU held for rx reorder */
uint32_t is_scan_bg; /* background scans started */
uint8_t is_rx_deauth_code; /* last rx'd deauth reason */
uint8_t is_rx_disassoc_code; /* last rx'd disassoc reason */
uint8_t is_rx_authfail_code; /* last rx'd auth fail reason */
uint32_t is_beacon_miss; /* beacon miss notification */
uint32_t is_rx_badstate; /* rx discard state != RUN */
uint32_t is_ff_flush; /* ff's flush'd from stageq */
uint32_t is_tx_ctl; /* tx ctrl frames */
uint32_t is_ampdu_rexmt; /* A-MPDU frames rexmt ok */
uint32_t is_ampdu_rexmt_fail; /* A-MPDU frames rexmt fail */
uint32_t is_mesh_wrongmesh; /* dropped 'cuz not mesh sta*/
uint32_t is_mesh_nolink; /* dropped 'cuz link not estab*/
uint32_t is_mesh_fwd_ttl; /* mesh not fwd'd 'cuz ttl 0 */
uint32_t is_mesh_fwd_nobuf; /* mesh not fwd'd 'cuz no mbuf*/
uint32_t is_mesh_fwd_tooshort; /* mesh not fwd'd 'cuz no hdr */
uint32_t is_mesh_fwd_disabled; /* mesh not fwd'd 'cuz disabled */
uint32_t is_mesh_fwd_nopath; /* mesh not fwd'd 'cuz path unknown */
uint32_t is_hwmp_wrongseq; /* wrong hwmp seq no. */
uint32_t is_hwmp_rootreqs; /* root PREQs sent */
uint32_t is_hwmp_rootrann; /* root RANNs sent */
uint32_t is_mesh_badae; /* dropped 'cuz invalid AE */
uint32_t is_mesh_rtaddfailed; /* route add failed */
uint32_t is_mesh_notproxy; /* dropped 'cuz not proxying */
uint32_t is_rx_badalign; /* dropped 'cuz misaligned */
uint32_t is_hwmp_proxy; /* PREP for proxy route */
uint32_t is_spare[11];
};
/*
* Max size of optional information elements. We artificially
* constrain this; it's limited only by the max frame size (and
* the max parameter size of the wireless extensions).
*/
#define IEEE80211_MAX_OPT_IE 256
/*
* WPA/RSN get/set key request. Specify the key/cipher
* type and whether the key is to be used for sending and/or
* receiving. The key index should be set only when working
* with global keys (use IEEE80211_KEYIX_NONE for ``no index'').
* Otherwise a unicast/pairwise key is specified by the bssid
* (on a station) or mac address (on an ap). They key length
* must include any MIC key data; otherwise it should be no
* more than IEEE80211_KEYBUF_SIZE.
*/
struct ieee80211req_key {
uint8_t ik_type; /* key/cipher type */
uint8_t ik_pad;
uint16_t ik_keyix; /* key index */
uint8_t ik_keylen; /* key length in bytes */
uint8_t ik_flags;
/* NB: IEEE80211_KEY_XMIT and IEEE80211_KEY_RECV defined elsewhere */
#define IEEE80211_KEY_DEFAULT 0x80 /* default xmit key */
uint8_t ik_macaddr[IEEE80211_ADDR_LEN];
uint64_t ik_keyrsc; /* key receive sequence counter */
uint64_t ik_keytsc; /* key transmit sequence counter */
uint8_t ik_keydata[IEEE80211_KEYBUF_SIZE+IEEE80211_MICBUF_SIZE];
};
/*
* Delete a key either by index or address. Set the index
* to IEEE80211_KEYIX_NONE when deleting a unicast key.
*/
struct ieee80211req_del_key {
uint8_t idk_keyix; /* key index */
uint8_t idk_macaddr[IEEE80211_ADDR_LEN];
};
/*
* MLME state manipulation request. IEEE80211_MLME_ASSOC
* only makes sense when operating as a station. The other
* requests can be used when operating as a station or an
* ap (to effect a station).
*/
struct ieee80211req_mlme {
uint8_t im_op; /* operation to perform */
#define IEEE80211_MLME_ASSOC 1 /* associate station */
#define IEEE80211_MLME_DISASSOC 2 /* disassociate station */
#define IEEE80211_MLME_DEAUTH 3 /* deauthenticate station */
#define IEEE80211_MLME_AUTHORIZE 4 /* authorize station */
#define IEEE80211_MLME_UNAUTHORIZE 5 /* unauthorize station */
#define IEEE80211_MLME_AUTH 6 /* authenticate station */
uint8_t im_ssid_len; /* length of optional ssid */
uint16_t im_reason; /* 802.11 reason code */
uint8_t im_macaddr[IEEE80211_ADDR_LEN];
uint8_t im_ssid[IEEE80211_NWID_LEN];
};
/*
* MAC ACL operations.
*/
enum {
IEEE80211_MACCMD_POLICY_OPEN = 0, /* set policy: no ACL's */
IEEE80211_MACCMD_POLICY_ALLOW = 1, /* set policy: allow traffic */
IEEE80211_MACCMD_POLICY_DENY = 2, /* set policy: deny traffic */
IEEE80211_MACCMD_FLUSH = 3, /* flush ACL database */
IEEE80211_MACCMD_DETACH = 4, /* detach ACL policy */
IEEE80211_MACCMD_POLICY = 5, /* get ACL policy */
IEEE80211_MACCMD_LIST = 6, /* get ACL database */
IEEE80211_MACCMD_POLICY_RADIUS = 7, /* set policy: RADIUS managed */
};
struct ieee80211req_maclist {
uint8_t ml_macaddr[IEEE80211_ADDR_LEN];
} __packed;
/*
* Mesh Routing Table Operations.
*/
enum {
IEEE80211_MESH_RTCMD_LIST = 0, /* list HWMP routing table */
IEEE80211_MESH_RTCMD_FLUSH = 1, /* flush HWMP routing table */
IEEE80211_MESH_RTCMD_ADD = 2, /* add entry to the table */
IEEE80211_MESH_RTCMD_DELETE = 3, /* delete an entry from the table */
};
struct ieee80211req_mesh_route {
uint8_t imr_flags;
#define IEEE80211_MESHRT_FLAGS_VALID 0x01
#define IEEE80211_MESHRT_FLAGS_PROXY 0x02
uint8_t imr_dest[IEEE80211_ADDR_LEN];
uint8_t imr_nexthop[IEEE80211_ADDR_LEN];
uint16_t imr_nhops;
uint8_t imr_pad;
uint32_t imr_metric;
uint32_t imr_lifetime;
uint32_t imr_lastmseq;
};
/*
* HWMP root modes
*/
enum {
IEEE80211_HWMP_ROOTMODE_DISABLED = 0, /* disabled */
IEEE80211_HWMP_ROOTMODE_NORMAL = 1, /* normal PREPs */
IEEE80211_HWMP_ROOTMODE_PROACTIVE = 2, /* proactive PREPS */
IEEE80211_HWMP_ROOTMODE_RANN = 3, /* use RANN elemid */
};
/*
* Set the active channel list by IEEE channel #: each channel
* to be marked active is set in a bit vector. Note this list is
* intersected with the available channel list in calculating
* the set of channels actually used in scanning.
*/
struct ieee80211req_chanlist {
uint8_t ic_channels[32]; /* NB: can be variable length */
};
/*
* Get the active channel list info.
*/
struct ieee80211req_chaninfo {
u_int ic_nchans;
struct ieee80211_channel ic_chans[1]; /* NB: variable length */
};
#define IEEE80211_CHANINFO_SIZE(_nchan) \
(sizeof(struct ieee80211req_chaninfo) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_CHANINFO_SPACE(_ci) \
IEEE80211_CHANINFO_SIZE((_ci)->ic_nchans)
/*
* Retrieve the WPA/RSN information element for an associated station.
*/
struct ieee80211req_wpaie { /* old version w/ only one ie */
uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
};
struct ieee80211req_wpaie2 {
uint8_t wpa_macaddr[IEEE80211_ADDR_LEN];
uint8_t wpa_ie[IEEE80211_MAX_OPT_IE];
uint8_t rsn_ie[IEEE80211_MAX_OPT_IE];
};
/*
* Retrieve per-node statistics.
*/
struct ieee80211req_sta_stats {
union {
/* NB: explicitly force 64-bit alignment */
uint8_t macaddr[IEEE80211_ADDR_LEN];
uint64_t pad;
} is_u;
struct ieee80211_nodestats is_stats;
};
/*
* Station information block; the mac address is used
* to retrieve other data like stats, unicast key, etc.
*/
struct ieee80211req_sta_info {
uint16_t isi_len; /* total length (mult of 4) */
uint16_t isi_ie_off; /* offset to IE data */
uint16_t isi_ie_len; /* IE length */
#ifdef __HAIKU__
struct ieee80211_channel isi_chan; /* Handing out the conmplete channel info */
#else
uint16_t isi_freq; /* MHz */
uint32_t isi_flags; /* channel flags */
#endif
uint32_t isi_state; /* state flags */
uint8_t isi_authmode; /* authentication algorithm */
int8_t isi_rssi; /* receive signal strength */
int8_t isi_noise; /* noise floor */
uint8_t isi_capinfo; /* capabilities */
uint8_t isi_erp; /* ERP element */
uint8_t isi_macaddr[IEEE80211_ADDR_LEN];
uint8_t isi_nrates;
/* negotiated rates */
uint8_t isi_rates[IEEE80211_RATE_MAXSIZE];
uint8_t isi_txrate; /* legacy/IEEE rate or MCS */
uint16_t isi_associd; /* assoc response */
uint16_t isi_txpower; /* current tx power */
uint16_t isi_vlan; /* vlan tag */
/* NB: [IEEE80211_NONQOS_TID] holds seq#'s for non-QoS stations */
uint16_t isi_txseqs[IEEE80211_TID_SIZE];/* tx seq #/TID */
uint16_t isi_rxseqs[IEEE80211_TID_SIZE];/* rx seq#/TID */
uint16_t isi_inact; /* inactivity timer */
uint16_t isi_txmbps; /* current tx rate in .5 Mb/s */
uint16_t isi_pad;
uint32_t isi_jointime; /* time of assoc/join */
struct ieee80211_mimo_info isi_mimo; /* MIMO info for 11n sta's */
/* 11s info */
uint16_t isi_peerid;
uint16_t isi_localid;
uint8_t isi_peerstate;
/* XXX frag state? */
/* variable length IE data */
};
/*
* Retrieve per-station information; to retrieve all
* specify a mac address of ff:ff:ff:ff:ff:ff.
*/
struct ieee80211req_sta_req {
union {
/* NB: explicitly force 64-bit alignment */
uint8_t macaddr[IEEE80211_ADDR_LEN];
uint64_t pad;
} is_u;
struct ieee80211req_sta_info info[1]; /* variable length */
};
/*
* Get/set per-station tx power cap.
*/
struct ieee80211req_sta_txpow {
uint8_t it_macaddr[IEEE80211_ADDR_LEN];
uint8_t it_txpow;
};
/*
* WME parameters manipulated with IEEE80211_IOC_WME_CWMIN
* through IEEE80211_IOC_WME_ACKPOLICY are set and return
* using i_val and i_len. i_val holds the value itself.
* i_len specifies the AC and, as appropriate, then high bit
* specifies whether the operation is to be applied to the
* BSS or ourself.
*/
#define IEEE80211_WMEPARAM_SELF 0x0000 /* parameter applies to self */
#define IEEE80211_WMEPARAM_BSS 0x8000 /* parameter applies to BSS */
#define IEEE80211_WMEPARAM_VAL 0x7fff /* parameter value */
/*
* Application Information Elements can be appended to a variety
* of frames with the IEE80211_IOC_APPIE request. This request
* piggybacks on a normal ieee80211req; the frame type is passed
* in i_val as the 802.11 FC0 bytes and the length of the IE data
* is passed in i_len. The data is referenced in i_data. If i_len
* is zero then any previously configured IE data is removed. At
* most IEEE80211_MAX_APPIE data be appened. Note that multiple
* IE's can be supplied; the data is treated opaquely.
*/
#define IEEE80211_MAX_APPIE 1024 /* max app IE data */
/*
* Hack: the WPA authenticator uses this mechanism to specify WPA
* ie's that are used instead of the ones normally constructed using
* the cipher state setup with separate ioctls. This avoids issues
* like the authenticator ordering ie data differently than the
* net80211 layer and needing to keep separate state for WPA and RSN.
*/
#define IEEE80211_APPIE_WPA \
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_BEACON | \
IEEE80211_FC0_SUBTYPE_PROBE_RESP)
/*
* Station mode roaming parameters. These are maintained
* per band/mode and control the roaming algorithm.
*/
struct ieee80211_roamparams_req {
struct ieee80211_roamparam params[IEEE80211_MODE_MAX];
};
/*
* Transmit parameters. These can be used to set fixed transmit
* rate for each operating mode when operating as client or on a
* per-client basis according to the capabilities of the client
* (e.g. an 11b client associated to an 11g ap) when operating as
* an ap.
*
* MCS are distinguished from legacy rates by or'ing in 0x80.
*/
struct ieee80211_txparams_req {
struct ieee80211_txparam params[IEEE80211_MODE_MAX];
};
/*
* Set regulatory domain state with IEEE80211_IOC_REGDOMAIN.
* Note this is both the regulatory description and the channel
* list. The get request for IEEE80211_IOC_REGDOMAIN returns
* only the regdomain info; the channel list is obtained
* separately with IEEE80211_IOC_CHANINFO.
*/
struct ieee80211_regdomain_req {
struct ieee80211_regdomain rd;
struct ieee80211req_chaninfo chaninfo;
};
#define IEEE80211_REGDOMAIN_SIZE(_nchan) \
(sizeof(struct ieee80211_regdomain_req) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_REGDOMAIN_SPACE(_req) \
IEEE80211_REGDOMAIN_SIZE((_req)->chaninfo.ic_nchans)
/*
* Get driver capabilities. Driver, hardware crypto, and
* HT/802.11n capabilities, and a table that describes what
* the radio can do.
*/
struct ieee80211_devcaps_req {
uint32_t dc_drivercaps; /* general driver caps */
uint32_t dc_cryptocaps; /* hardware crypto support */
uint32_t dc_htcaps; /* HT/802.11n support */
struct ieee80211req_chaninfo dc_chaninfo;
};
#define IEEE80211_DEVCAPS_SIZE(_nchan) \
(sizeof(struct ieee80211_devcaps_req) + \
(((_nchan)-1) * sizeof(struct ieee80211_channel)))
#define IEEE80211_DEVCAPS_SPACE(_dc) \
IEEE80211_DEVCAPS_SIZE((_dc)->dc_chaninfo.ic_nchans)
struct ieee80211_chanswitch_req {
struct ieee80211_channel csa_chan; /* new channel */
int csa_mode; /* CSA mode */
int csa_count; /* beacon count to switch */
};
/*
* Get/set per-station vlan tag.
*/
struct ieee80211req_sta_vlan {
uint8_t sv_macaddr[IEEE80211_ADDR_LEN];
uint16_t sv_vlan;
};
#if defined(__FreeBSD__) || defined(__HAIKU__)
/*
* FreeBSD-style ioctls.
*/
/* the first member must be matched with struct ifreq */
struct ieee80211req {
char i_name[IFNAMSIZ]; /* if_name, e.g. "wi0" */
uint16_t i_type; /* req type */
int16_t i_val; /* Index or simple value */
int16_t i_len; /* Index or simple value */
void *i_data; /* Extra data */
};
#define SIOCS80211 _IOW('i', 234, struct ieee80211req)
#define SIOCG80211 _IOWR('i', 235, struct ieee80211req)
#define SIOCG80211STATS _IOWR('i', 236, struct ifreq)
#define IEEE80211_IOC_SSID 1
#define IEEE80211_IOC_NUMSSIDS 2
#define IEEE80211_IOC_WEP 3
#define IEEE80211_WEP_NOSUP -1
#define IEEE80211_WEP_OFF 0
#define IEEE80211_WEP_ON 1
#define IEEE80211_WEP_MIXED 2
#define IEEE80211_IOC_WEPKEY 4
#define IEEE80211_IOC_NUMWEPKEYS 5
#define IEEE80211_IOC_WEPTXKEY 6
#define IEEE80211_IOC_AUTHMODE 7
#define IEEE80211_IOC_STATIONNAME 8
#define IEEE80211_IOC_CHANNEL 9
#define IEEE80211_IOC_POWERSAVE 10
#define IEEE80211_POWERSAVE_NOSUP -1
#define IEEE80211_POWERSAVE_OFF 0
#define IEEE80211_POWERSAVE_CAM 1
#define IEEE80211_POWERSAVE_PSP 2
#define IEEE80211_POWERSAVE_PSP_CAM 3
#define IEEE80211_POWERSAVE_ON IEEE80211_POWERSAVE_CAM
#define IEEE80211_IOC_POWERSAVESLEEP 11
#define IEEE80211_IOC_RTSTHRESHOLD 12
#define IEEE80211_IOC_PROTMODE 13
#define IEEE80211_PROTMODE_OFF 0
#define IEEE80211_PROTMODE_CTS 1
#define IEEE80211_PROTMODE_RTSCTS 2
#define IEEE80211_IOC_TXPOWER 14 /* global tx power limit */
#define IEEE80211_IOC_BSSID 15
#define IEEE80211_IOC_ROAMING 16 /* roaming mode */
#define IEEE80211_IOC_PRIVACY 17 /* privacy invoked */
#define IEEE80211_IOC_DROPUNENCRYPTED 18 /* discard unencrypted frames */
#define IEEE80211_IOC_WPAKEY 19
#define IEEE80211_IOC_DELKEY 20
#define IEEE80211_IOC_MLME 21
/* 22 was IEEE80211_IOC_OPTIE, replaced by IEEE80211_IOC_APPIE */
/* 23 was IEEE80211_IOC_SCAN_REQ */
/* 24 was IEEE80211_IOC_SCAN_RESULTS */
#define IEEE80211_IOC_COUNTERMEASURES 25 /* WPA/TKIP countermeasures */
#define IEEE80211_IOC_WPA 26 /* WPA mode (0,1,2) */
#define IEEE80211_IOC_CHANLIST 27 /* channel list */
#define IEEE80211_IOC_WME 28 /* WME mode (on, off) */
#define IEEE80211_IOC_HIDESSID 29 /* hide SSID mode (on, off) */
#define IEEE80211_IOC_APBRIDGE 30 /* AP inter-sta bridging */
/* 31-35,37-38 were for WPA authenticator settings */
/* 36 was IEEE80211_IOC_DRIVER_CAPS */
#define IEEE80211_IOC_WPAIE 39 /* WPA information element */
#define IEEE80211_IOC_STA_STATS 40 /* per-station statistics */
#define IEEE80211_IOC_MACCMD 41 /* MAC ACL operation */
#define IEEE80211_IOC_CHANINFO 42 /* channel info list */
#define IEEE80211_IOC_TXPOWMAX 43 /* max tx power for channel */
#define IEEE80211_IOC_STA_TXPOW 44 /* per-station tx power limit */
/* 45 was IEEE80211_IOC_STA_INFO */
#define IEEE80211_IOC_WME_CWMIN 46 /* WME: ECWmin */
#define IEEE80211_IOC_WME_CWMAX 47 /* WME: ECWmax */
#define IEEE80211_IOC_WME_AIFS 48 /* WME: AIFSN */
#define IEEE80211_IOC_WME_TXOPLIMIT 49 /* WME: txops limit */
#define IEEE80211_IOC_WME_ACM 50 /* WME: ACM (bss only) */
#define IEEE80211_IOC_WME_ACKPOLICY 51 /* WME: ACK policy (!bss only)*/
#define IEEE80211_IOC_DTIM_PERIOD 52 /* DTIM period (beacons) */
#define IEEE80211_IOC_BEACON_INTERVAL 53 /* beacon interval (ms) */
#define IEEE80211_IOC_ADDMAC 54 /* add sta to MAC ACL table */
#define IEEE80211_IOC_DELMAC 55 /* del sta from MAC ACL table */
#define IEEE80211_IOC_PUREG 56 /* pure 11g (no 11b stations) */
#define IEEE80211_IOC_FF 57 /* ATH fast frames (on, off) */
#define IEEE80211_IOC_TURBOP 58 /* ATH turbo' (on, off) */
#define IEEE80211_IOC_BGSCAN 59 /* bg scanning (on, off) */
#define IEEE80211_IOC_BGSCAN_IDLE 60 /* bg scan idle threshold */
#define IEEE80211_IOC_BGSCAN_INTERVAL 61 /* bg scan interval */
#define IEEE80211_IOC_SCANVALID 65 /* scan cache valid threshold */
/* 66-72 were IEEE80211_IOC_ROAM_* and IEEE80211_IOC_MCAST_RATE */
#define IEEE80211_IOC_FRAGTHRESHOLD 73 /* tx fragmentation threshold */
#define IEEE80211_IOC_BURST 75 /* packet bursting */
#define IEEE80211_IOC_SCAN_RESULTS 76 /* get scan results */
#define IEEE80211_IOC_BMISSTHRESHOLD 77 /* beacon miss threshold */
#define IEEE80211_IOC_STA_INFO 78 /* station/neighbor info */
#define IEEE80211_IOC_WPAIE2 79 /* WPA+RSN info elements */
#define IEEE80211_IOC_CURCHAN 80 /* current channel */
#define IEEE80211_IOC_SHORTGI 81 /* 802.11n half GI */
#define IEEE80211_IOC_AMPDU 82 /* 802.11n A-MPDU (on, off) */
#define IEEE80211_IOC_AMPDU_LIMIT 83 /* A-MPDU length limit */
#define IEEE80211_IOC_AMPDU_DENSITY 84 /* A-MPDU density */
#define IEEE80211_IOC_AMSDU 85 /* 802.11n A-MSDU (on, off) */
#define IEEE80211_IOC_AMSDU_LIMIT 86 /* A-MSDU length limit */
#define IEEE80211_IOC_PUREN 87 /* pure 11n (no legacy sta's) */
#define IEEE80211_IOC_DOTH 88 /* 802.11h (on, off) */
/* 89-91 were regulatory items */
#define IEEE80211_IOC_HTCOMPAT 92 /* support pre-D1.10 HT ie's */
#define IEEE80211_IOC_DWDS 93 /* DWDS/4-address handling */
#define IEEE80211_IOC_INACTIVITY 94 /* sta inactivity handling */
#define IEEE80211_IOC_APPIE 95 /* application IE's */
#define IEEE80211_IOC_WPS 96 /* WPS operation */
#define IEEE80211_IOC_TSN 97 /* TSN operation */
#define IEEE80211_IOC_DEVCAPS 98 /* driver+device capabilities */
#define IEEE80211_IOC_CHANSWITCH 99 /* start 11h channel switch */
#define IEEE80211_IOC_DFS 100 /* DFS (on, off) */
#define IEEE80211_IOC_DOTD 101 /* 802.11d (on, off) */
#define IEEE80211_IOC_HTPROTMODE 102 /* HT protection (off, rts) */
#define IEEE80211_IOC_SCAN_REQ 103 /* scan w/ specified params */
#define IEEE80211_IOC_SCAN_CANCEL 104 /* cancel ongoing scan */
#define IEEE80211_IOC_HTCONF 105 /* HT config (off, HT20, HT40)*/
#define IEEE80211_IOC_REGDOMAIN 106 /* regulatory domain info */
#define IEEE80211_IOC_ROAM 107 /* roaming params en masse */
#define IEEE80211_IOC_TXPARAMS 108 /* tx parameters */
#define IEEE80211_IOC_STA_VLAN 109 /* per-station vlan tag */
#define IEEE80211_IOC_SMPS 110 /* MIMO power save */
#define IEEE80211_IOC_RIFS 111 /* RIFS config (on, off) */
#define IEEE80211_IOC_GREENFIELD 112 /* Greenfield (on, off) */
#define IEEE80211_IOC_STBC 113 /* STBC Tx/RX (on, off) */
#define IEEE80211_IOC_MESH_ID 170 /* mesh identifier */
#define IEEE80211_IOC_MESH_AP 171 /* accepting peerings */
#define IEEE80211_IOC_MESH_FWRD 172 /* forward frames */
#define IEEE80211_IOC_MESH_PROTO 173 /* mesh protocols */
#define IEEE80211_IOC_MESH_TTL 174 /* mesh TTL */
#define IEEE80211_IOC_MESH_RTCMD 175 /* mesh routing table commands*/
#define IEEE80211_IOC_MESH_PR_METRIC 176 /* mesh metric protocol */
#define IEEE80211_IOC_MESH_PR_PATH 177 /* mesh path protocol */
#define IEEE80211_IOC_MESH_PR_SIG 178 /* mesh sig protocol */
#define IEEE80211_IOC_MESH_PR_CC 179 /* mesh congestion protocol */
#define IEEE80211_IOC_MESH_PR_AUTH 180 /* mesh auth protocol */
#define IEEE80211_IOC_HWMP_ROOTMODE 190 /* HWMP root mode */
#define IEEE80211_IOC_HWMP_MAXHOPS 191 /* number of hops before drop */
#define IEEE80211_IOC_HWMP_TTL 192 /* HWMP TTL */
#define IEEE80211_IOC_TDMA_SLOT 201 /* TDMA: assigned slot */
#define IEEE80211_IOC_TDMA_SLOTCNT 202 /* TDMA: slots in bss */
#define IEEE80211_IOC_TDMA_SLOTLEN 203 /* TDMA: slot length (usecs) */
#define IEEE80211_IOC_TDMA_BINTERVAL 204 /* TDMA: beacon intvl (slots) */
/*
* Parameters for controlling a scan requested with
* IEEE80211_IOC_SCAN_REQ.
*
* Active scans cause ProbeRequest frames to be issued for each
* specified ssid and, by default, a broadcast ProbeRequest frame.
* The set of ssid's is specified in the request.
*
* By default the scan will cause a BSS to be joined (in station/adhoc
* mode) or a channel to be selected for operation (hostap mode).
* To disable that specify IEEE80211_IOC_SCAN_NOPICK and if the
*
* If the station is currently associated to an AP then a scan request
* will cause the station to leave the current channel and potentially
* miss frames from the AP. Alternatively the station may notify the
* AP that it is going into power save mode before it leaves the channel.
* This ensures frames for the station are buffered by the AP. This is
* termed a ``bg scan'' and is requested with the IEEE80211_IOC_SCAN_BGSCAN
* flag. Background scans may take longer than foreground scans and may
* be preempted by traffic. If a station is not associated to an AP
* then a request for a background scan is automatically done in the
* foreground.
*
* The results of the scan request are cached by the system. This
* information is aged out and/or invalidated based on events like not
* being able to associated to an AP. To flush the current cache
* contents before doing a scan the IEEE80211_IOC_SCAN_FLUSH flag may
* be specified.
*
* By default the scan will be done until a suitable AP is located
* or a channel is found for use. A scan can also be constrained
* to be done once (IEEE80211_IOC_SCAN_ONCE) or to last for no more
* than a specified duration.
*/
struct ieee80211_scan_req {
int sr_flags;
#define IEEE80211_IOC_SCAN_NOPICK 0x00001 /* scan only, no selection */
#define IEEE80211_IOC_SCAN_ACTIVE 0x00002 /* active scan (probe req) */
#define IEEE80211_IOC_SCAN_PICK1ST 0x00004 /* ``hey sailor'' mode */
#define IEEE80211_IOC_SCAN_BGSCAN 0x00008 /* bg scan, exit ps at end */
#define IEEE80211_IOC_SCAN_ONCE 0x00010 /* do one complete pass */
#define IEEE80211_IOC_SCAN_NOBCAST 0x00020 /* don't send bcast probe req */
#define IEEE80211_IOC_SCAN_NOJOIN 0x00040 /* no auto-sequencing */
#define IEEE80211_IOC_SCAN_FLUSH 0x10000 /* flush scan cache first */
#define IEEE80211_IOC_SCAN_CHECK 0x20000 /* check scan cache first */
u_int sr_duration; /* duration (ms) */
#define IEEE80211_IOC_SCAN_DURATION_MIN 1
#define IEEE80211_IOC_SCAN_DURATION_MAX 0x7fffffff
#define IEEE80211_IOC_SCAN_FOREVER IEEE80211_IOC_SCAN_DURATION_MAX
u_int sr_mindwell; /* min channel dwelltime (ms) */
u_int sr_maxdwell; /* max channel dwelltime (ms) */
int sr_nssid;
#define IEEE80211_IOC_SCAN_MAX_SSID 3
struct {
int len; /* length in bytes */
uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */
} sr_ssid[IEEE80211_IOC_SCAN_MAX_SSID];
};
/*
* Scan result data returned for IEEE80211_IOC_SCAN_RESULTS.
* Each result is a fixed size structure followed by a variable
* length SSID and one or more variable length information elements.
* The size of each variable length item is found in the fixed
* size structure and the entire length of the record is specified
* in isr_len. Result records are rounded to a multiple of 4 bytes.
*/
struct ieee80211req_scan_result {
uint16_t isr_len; /* total length (mult of 4) */
uint16_t isr_ie_off; /* offset to SSID+IE data */
uint16_t isr_ie_len; /* IE length */
#ifdef __HAIKU__
struct ieee80211_channel isr_chan; /* Handing out the conmplete channel info */
#else
uint16_t isr_freq; /* MHz */
uint16_t isr_flags; /* channel flags */
#endif
int8_t isr_noise;
int8_t isr_rssi;
uint8_t isr_intval; /* beacon interval */
uint8_t isr_capinfo; /* capabilities */
uint8_t isr_erp; /* ERP element */
uint8_t isr_bssid[IEEE80211_ADDR_LEN];
uint8_t isr_nrates;
uint8_t isr_rates[IEEE80211_RATE_MAXSIZE];
uint8_t isr_ssid_len; /* SSID length */
uint8_t isr_meshid_len; /* MESH ID length */
/* variable length SSID, followed by variable length MESH ID,
followed by IE data */
};
/*
* Virtual AP cloning parameters. The parent device must
* be a vap-capable device. All parameters specified with
* the clone request are fixed for the lifetime of the vap.
*
* There are two flavors of WDS vaps: legacy and dynamic.
* Legacy WDS operation implements a static binding between
* two stations encapsulating traffic in 4-address frames.
* Dynamic WDS vaps are created when a station associates to
* an AP and sends a 4-address frame. If the AP vap is
* configured to support WDS then this will generate an
* event to user programs listening on the routing socket
* and a Dynamic WDS vap will be created to handle traffic
* to/from that station. In both cases the bssid of the
* peer must be specified when creating the vap.
*
* By default a vap will inherit the mac address/bssid of
* the underlying device. To request a unique address the
* IEEE80211_CLONE_BSSID flag should be supplied. This is
* meaningless for WDS vaps as they share the bssid of an
* AP vap that must otherwise exist. Note that some devices
* may not be able to support multiple addresses.
*
* Station mode vap's normally depend on the device to notice
* when the AP stops sending beacon frames. If IEEE80211_CLONE_NOBEACONS
* is specified the net80211 layer will do this in s/w. This
* is mostly useful when setting up a WDS repeater/extender where
* an AP vap is combined with a sta vap and the device isn't able
* to track beacon frames in hardware.
*/
struct ieee80211_clone_params {
char icp_parent[IFNAMSIZ]; /* parent device */
uint16_t icp_opmode; /* operating mode */
uint16_t icp_flags; /* see below */
uint8_t icp_bssid[IEEE80211_ADDR_LEN]; /* for WDS links */
uint8_t icp_macaddr[IEEE80211_ADDR_LEN];/* local address */
};
#define IEEE80211_CLONE_BSSID 0x0001 /* allocate unique mac/bssid */
#define IEEE80211_CLONE_NOBEACONS 0x0002 /* don't setup beacon timers */
#define IEEE80211_CLONE_WDSLEGACY 0x0004 /* legacy WDS processing */
#define IEEE80211_CLONE_MACADDR 0x0008 /* use specified mac addr */
#define IEEE80211_CLONE_TDMA 0x0010 /* operate in TDMA mode */
#endif /* __FreeBSD__ */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_IOCTL_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_mesh.h
-525
View File
@@ -1,525 +0,0 @@
/*-
* Copyright (c) 2009 The FreeBSD Foundation
* All rights reserved.
*
* This software was developed by Rui Paulo under sponsorship from the
* FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_MESH_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_MESH_H_
#define IEEE80211_MESH_DEFAULT_TTL 31
/*
* NB: all structures are__packed so sizeof works on arm, et. al.
*/
/*
* 802.11s Information Elements.
*/
/* Mesh Configuration */
struct ieee80211_meshconf_ie {
uint8_t conf_ie; /* IEEE80211_ELEMID_MESHCONF */
uint8_t conf_len;
uint8_t conf_ver;
uint8_t conf_pselid[4]; /* Active Path Sel. Proto. ID */
uint8_t conf_pmetid[4]; /* APS Metric Identifier */
uint8_t conf_ccid[4]; /* Congestion Control Mode ID */
uint8_t conf_syncid[4]; /* Sync. Protocol ID */
uint8_t conf_authid[4]; /* Auth. Protocol ID */
uint8_t conf_form; /* Formation Information */
uint8_t conf_cap;
} __packed;
#define IEEE80211_MESHCONF_VERSION 1
/* Null Protocol */
#define IEEE80211_MESHCONF_NULL_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_NULL_VALUE 0xff
#define IEEE80211_MESHCONF_NULL { IEEE80211_MESHCONF_NULL_OUI, \
IEEE80211_MESHCONF_NULL_VALUE }
/* Hybrid Wireless Mesh Protocol */
#define IEEE80211_MESHCONF_HWMP_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_HWMP_VALUE 0x00
#define IEEE80211_MESHCONF_HWMP { IEEE80211_MESHCONF_HWMP_OUI, \
IEEE80211_MESHCONF_HWMP_VALUE }
/* Airtime Link Metric */
#define IEEE80211_MESHCONF_AIRTIME_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_AIRTIME_VALUE 0x00
#define IEEE80211_MESHCONF_AIRTIME { IEEE80211_MESHCONF_AIRTIME_OUI, \
IEEE80211_MESHCONF_AIRTIME_VALUE }
/* Congestion Control Signaling */
#define IEEE80211_MESHCONF_CCSIG_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_CCSIG_VALUE 0x00
#define IEEE80211_MESHCONF_CCSIG { IEEE80211_MESHCONF_CCSIG_OUI,\
IEEE80211_MESHCONF_CCSIG_VALUE }
/* Neighbour Offset */
#define IEEE80211_MESHCONF_NEIGHOFF_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_NEIGHOFF_VALUE 0x00
#define IEEE80211_MESHCONF_NEIGHOFF { IEEE80211_MESHCONF_NEIGHOFF_OUI, \
IEEE80211_MESHCONF_NEIGHOFF_VALUE }
/* Simultaneous Authenticaction of Equals */
#define IEEE80211_MESHCONF_SAE_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHCONF_SAE_VALUE 0x01
#define IEEE80211_MESHCONF_SAE { IEEE80211_MESHCONF_SAE_OUI, \
IEEE80211_MESHCONF_SAE_VALUE }
#define IEEE80211_MESHCONF_FORM_MP 0x01 /* Connected to Portal */
#define IEEE80211_MESHCONF_FORM_NNEIGH_MASK 0x04 /* Number of Neighbours */
#define IEEE80211_MESHCONF_CAP_AP 0x01 /* Accepting Peers */
#define IEEE80211_MESHCONF_CAP_MCCAS 0x02 /* MCCA supported */
#define IEEE80211_MESHCONF_CAP_MCCAE 0x04 /* MCCA enabled */
#define IEEE80211_MESHCONF_CAP_FWRD 0x08 /* forwarding enabled */
#define IEEE80211_MESHCONF_CAP_BTR 0x10 /* Beacon Timing Report Enab */
#define IEEE80211_MESHCONF_CAP_TBTTA 0x20 /* TBTT Adj. Enabled */
#define IEEE80211_MESHCONF_CAP_PSL 0x40 /* Power Save Level */
/* Mesh Identifier */
struct ieee80211_meshid_ie {
uint8_t id_ie; /* IEEE80211_ELEMID_MESHID */
uint8_t id_len;
} __packed;
/* Link Metric Report */
struct ieee80211_meshlmetric_ie {
uint8_t lm_ie; /* IEEE80211_ELEMID_MESHLINK */
uint8_t lm_len;
uint32_t lm_metric;
#define IEEE80211_MESHLMETRIC_INITIALVAL 0
} __packed;
/* Congestion Notification */
struct ieee80211_meshcngst_ie {
uint8_t cngst_ie; /* IEEE80211_ELEMID_MESHCNGST */
uint8_t cngst_len;
uint16_t cngst_timer[4]; /* Expiration Timers: AC_BK,
AC_BE, AC_VI, AC_VO */
} __packed;
/* Peer Version */
struct ieee80211_meshpeerver_ie {
uint8_t peerver_ie; /* IEEE80211_ELEMID_MESHPEERVER */
uint8_t peerver_len;
uint8_t peerver_proto[4];
} __packed;
/* Mesh Peering Management Protocol */
#define IEEE80211_MESHPEERVER_PEER_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHPEERVER_PEER_VALUE 0x2a
#define IEEE80211_MESHPEERVER_PEER { IEEE80211_MESHPEERVER_PEER_OUI, \
IEEE80211_MESHPEERVER_PEER_VALUE }
/* Abbreviated Handshake Protocol */
#define IEEE80211_MESHPEERVER_AH_OUI 0x00, 0x0f, 0xac
#define IEEE80211_MESHPEERVER_AH_VALUE 0x2b
#define IEEE80211_MESHPEERVER_AH { IEEE80211_MESHPEERVER_AH_OUI, \
IEEE80211_MESHPEERVER_AH_VALUE }
/* Peer Link Management */
struct ieee80211_meshpeer_ie {
uint8_t peer_ie; /* IEEE80211_ELEMID_MESHPEER */
uint8_t peer_len;
uint8_t peer_subtype;
uint16_t peer_llinkid; /* Local Link ID */
uint16_t peer_linkid; /* Peer Link ID */
uint16_t peer_rcode;
} __packed;
enum {
IEEE80211_MESH_PEER_LINK_OPEN = 0,
IEEE80211_MESH_PEER_LINK_CONFIRM = 1,
IEEE80211_MESH_PEER_LINK_CLOSE = 2,
/* values 3-255 are reserved */
};
#ifdef notyet
/* Mesh Channel Switch Annoucement */
struct ieee80211_meshcsa_ie {
uint8_t csa_ie; /* IEEE80211_ELEMID_MESHCSA */
uint8_t csa_len;
uint8_t csa_mode;
uint8_t csa_newclass; /* New Regulatory Class */
uint8_t csa_newchan;
uint8_t csa_precvalue; /* Precedence Value */
uint8_t csa_count;
} __packed;
/* Mesh TIM */
/* Equal to the non Mesh version */
/* Mesh Awake Window */
struct ieee80211_meshawakew_ie {
uint8_t awakew_ie; /* IEEE80211_ELEMID_MESHAWAKEW */
uint8_t awakew_len;
uint8_t awakew_windowlen; /* in TUs */
} __packed;
/* Mesh Beacon Timing */
struct ieee80211_meshbeacont_ie {
uint8_t beacont_ie; /* IEEE80211_ELEMID_MESHBEACONT */
uint8_t beacont_len;
struct {
uint8_t mp_aid; /* Least Octet of AID */
uint16_t mp_btime; /* Beacon Time */
uint16_t mp_bint; /* Beacon Interval */
} __packed mp[1]; /* NB: variable size */
} __packed;
#endif
/* Portal (MP) Annoucement */
struct ieee80211_meshpann_ie {
uint8_t pann_ie; /* IEEE80211_ELEMID_MESHPANN */
uint8_t pann_len;
uint8_t pann_flags;
uint8_t pann_hopcount;
uint8_t pann_ttl;
uint8_t pann_addr[IEEE80211_ADDR_LEN];
uint8_t pann_seq; /* PANN Sequence Number */
} __packed;
/* Root (MP) Annoucement */
struct ieee80211_meshrann_ie {
uint8_t rann_ie; /* IEEE80211_ELEMID_MESHRANN */
uint8_t rann_len;
uint8_t rann_flags;
#define IEEE80211_MESHRANN_FLAGS_PR 0x01 /* Portal Role */
uint8_t rann_hopcount;
uint8_t rann_ttl;
uint8_t rann_addr[IEEE80211_ADDR_LEN];
uint32_t rann_seq; /* HWMP Sequence Number */
uint32_t rann_metric;
} __packed;
/* Mesh Path Request */
struct ieee80211_meshpreq_ie {
uint8_t preq_ie; /* IEEE80211_ELEMID_MESHPREQ */
uint8_t preq_len;
uint8_t preq_flags;
#define IEEE80211_MESHPREQ_FLAGS_PR 0x01 /* Portal Role */
#define IEEE80211_MESHPREQ_FLAGS_AM 0x02 /* 0 = ucast / 1 = bcast */
#define IEEE80211_MESHPREQ_FLAGS_PP 0x04 /* Proactive PREP */
#define IEEE80211_MESHPREQ_FLAGS_AE 0x40 /* Address Extension */
uint8_t preq_hopcount;
uint8_t preq_ttl;
uint32_t preq_id;
uint8_t preq_origaddr[IEEE80211_ADDR_LEN];
uint32_t preq_origseq; /* HWMP Sequence Number */
/* NB: may have Originator Proxied Address */
uint32_t preq_lifetime;
uint32_t preq_metric;
uint8_t preq_tcount; /* target count */
struct {
uint8_t target_flags;
#define IEEE80211_MESHPREQ_TFLAGS_TO 0x01 /* Target Only */
#define IEEE80211_MESHPREQ_TFLAGS_RF 0x02 /* Reply and Forward */
#define IEEE80211_MESHPREQ_TFLAGS_USN 0x04 /* Unknown HWMP seq number */
uint8_t target_addr[IEEE80211_ADDR_LEN];
uint32_t target_seq; /* HWMP Sequence Number */
} __packed preq_targets[1]; /* NB: variable size */
} __packed;
/* Mesh Path Reply */
struct ieee80211_meshprep_ie {
uint8_t prep_ie; /* IEEE80211_ELEMID_MESHPREP */
uint8_t prep_len;
uint8_t prep_flags;
uint8_t prep_hopcount;
uint8_t prep_ttl;
uint8_t prep_targetaddr[IEEE80211_ADDR_LEN];
uint32_t prep_targetseq;
/* NB: May have Target Proxied Address */
uint32_t prep_lifetime;
uint32_t prep_metric;
uint8_t prep_origaddr[IEEE80211_ADDR_LEN];
uint32_t prep_origseq; /* HWMP Sequence Number */
} __packed;
/* Mesh Path Error */
struct ieee80211_meshperr_ie {
uint8_t perr_ie; /* IEEE80211_ELEMID_MESHPERR */
uint8_t perr_len;
uint8_t perr_mode; /* NB: reserved */
uint8_t perr_ndests; /* Number of Destinations */
struct {
uint8_t dest_addr[IEEE80211_ADDR_LEN];
uint32_t dest_seq; /* HWMP Sequence Number */
} __packed perr_dests[1]; /* NB: variable size */
} __packed;
#ifdef notyet
/* Mesh Proxy Update */
struct ieee80211_meshpu_ie {
uint8_t pu_ie; /* IEEE80211_ELEMID_MESHPU */
uint8_t pu_len;
uint8_t pu_flags;
#define IEEE80211_MESHPU_FLAGS_MASK 0x1
#define IEEE80211_MESHPU_FLAGS_DEL 0x0
#define IEEE80211_MESHPU_FLAGS_ADD 0x1
uint8_t pu_seq; /* PU Sequence Number */
uint8_t pu_addr[IEEE80211_ADDR_LEN];
uint8_t pu_naddr; /* Number of Proxied Addresses */
/* NB: proxied address follows */
} __packed;
/* Mesh Proxy Update Confirmation */
struct ieee80211_meshpuc_ie {
uint8_t puc_ie; /* IEEE80211_ELEMID_MESHPUC */
uint8_t puc_len;
uint8_t puc_flags;
uint8_t puc_seq; /* PU Sequence Number */
uint8_t puc_daddr[IEEE80211_ADDR_LEN];
} __packed;
#endif
/*
* 802.11s Action Frames
*/
#define IEEE80211_ACTION_CAT_MESHPEERING 30 /* XXX Linux */
#define IEEE80211_ACTION_CAT_MESHLMETRIC 13
#define IEEE80211_ACTION_CAT_MESHPATH 32 /* XXX Linux */
#define IEEE80211_ACTION_CAT_INTERWORK 15
#define IEEE80211_ACTION_CAT_RESOURCE 16
#define IEEE80211_ACTION_CAT_PROXY 17
/*
* Mesh Peering Action codes.
*/
enum {
IEEE80211_ACTION_MESHPEERING_OPEN = 0,
IEEE80211_ACTION_MESHPEERING_CONFIRM = 1,
IEEE80211_ACTION_MESHPEERING_CLOSE = 2,
/* 3-255 reserved */
};
/*
* Mesh Path Selection Action codes.
*/
enum {
IEEE80211_ACTION_MESHPATH_REQ = 0,
IEEE80211_ACTION_MESHPATH_REP = 1,
IEEE80211_ACTION_MESHPATH_ERR = 2,
IEEE80211_ACTION_MESHPATH_RANN = 3,
/* 4-255 reserved */
};
/*
* Mesh Link Metric Action codes.
*/
enum {
IEEE80211_ACTION_MESHLMETRIC_REQ = 0, /* Link Metric Request */
IEEE80211_ACTION_MESHLMETRIC_REP = 1, /* Link Metric Report */
/* 2-255 reserved */
};
/*
* Mesh Portal Annoucement Action codes.
*/
enum {
IEEE80211_ACTION_MESHPANN = 0,
/* 1-255 reserved */
};
/*
* Different mesh control structures based on the AE
* (Address Extension) bits.
*/
struct ieee80211_meshcntl {
uint8_t mc_flags; /* Address Extension 00 */
uint8_t mc_ttl; /* TTL */
uint8_t mc_seq[4]; /* Sequence No. */
/* NB: more addresses may follow */
} __packed;
struct ieee80211_meshcntl_ae01 {
uint8_t mc_flags; /* Address Extension 01 */
uint8_t mc_ttl; /* TTL */
uint8_t mc_seq[4]; /* Sequence No. */
uint8_t mc_addr4[IEEE80211_ADDR_LEN];
} __packed;
struct ieee80211_meshcntl_ae10 {
uint8_t mc_flags; /* Address Extension 10 */
uint8_t mc_ttl; /* TTL */
uint8_t mc_seq[4]; /* Sequence No. */
uint8_t mc_addr4[IEEE80211_ADDR_LEN];
uint8_t mc_addr5[IEEE80211_ADDR_LEN];
} __packed;
struct ieee80211_meshcntl_ae11 {
uint8_t mc_flags; /* Address Extension 11 */
uint8_t mc_ttl; /* TTL */
uint8_t mc_seq[4]; /* Sequence No. */
uint8_t mc_addr4[IEEE80211_ADDR_LEN];
uint8_t mc_addr5[IEEE80211_ADDR_LEN];
uint8_t mc_addr6[IEEE80211_ADDR_LEN];
} __packed;
#ifdef _KERNEL
struct ieee80211_mesh_route {
TAILQ_ENTRY(ieee80211_mesh_route) rt_next;
int rt_crtime; /* creation time */
uint8_t rt_dest[IEEE80211_ADDR_LEN];
uint8_t rt_nexthop[IEEE80211_ADDR_LEN];
uint32_t rt_metric; /* path metric */
uint16_t rt_nhops; /* number of hops */
uint16_t rt_flags;
#define IEEE80211_MESHRT_FLAGS_VALID 0x01 /* patch discovery complete */
#define IEEE80211_MESHRT_FLAGS_PROXY 0x02 /* proxy entry */
uint32_t rt_lifetime;
uint32_t rt_lastmseq; /* last seq# seen dest */
void *rt_priv; /* private data */
};
#define IEEE80211_MESH_ROUTE_PRIV(rt, cast) ((cast *)rt->rt_priv)
#define IEEE80211_MESH_PROTO_DSZ 12 /* description size */
/*
* Mesh Path Selection Protocol.
*/
enum ieee80211_state;
struct ieee80211_mesh_proto_path {
char mpp_descr[IEEE80211_MESH_PROTO_DSZ];
uint8_t mpp_ie[4];
struct ieee80211_node *
(*mpp_discover)(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN],
struct mbuf *);
void (*mpp_peerdown)(struct ieee80211_node *);
void (*mpp_vattach)(struct ieee80211vap *);
void (*mpp_vdetach)(struct ieee80211vap *);
int (*mpp_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
const size_t mpp_privlen; /* size required in the routing table
for private data */
int mpp_inact; /* inact. timeout for invalid routes
(ticks) */
};
/*
* Mesh Link Metric Report Protocol.
*/
struct ieee80211_mesh_proto_metric {
char mpm_descr[IEEE80211_MESH_PROTO_DSZ];
uint8_t mpm_ie[4];
uint32_t (*mpm_metric)(struct ieee80211_node *);
};
#ifdef notyet
/*
* Mesh Authentication Protocol.
*/
struct ieee80211_mesh_proto_auth {
uint8_t mpa_ie[4];
};
struct ieee80211_mesh_proto_congestion {
};
struct ieee80211_mesh_proto_sync {
};
#endif
typedef uint32_t ieee80211_mesh_seq;
#define IEEE80211_MESH_SEQ_LEQ(a, b) ((int32_t)((a)-(b)) <= 0)
#define IEEE80211_MESH_SEQ_GEQ(a, b) ((int32_t)((a)-(b)) >= 0)
struct ieee80211_mesh_state {
int ms_idlen;
uint8_t ms_id[IEEE80211_MESHID_LEN];
ieee80211_mesh_seq ms_seq; /* seq no for meshcntl */
uint16_t ms_neighbors;
uint8_t ms_ttl; /* mesh ttl set in packets */
#define IEEE80211_MESHFLAGS_AP 0x01 /* accept peers */
#define IEEE80211_MESHFLAGS_PORTAL 0x02 /* mesh portal role */
#define IEEE80211_MESHFLAGS_FWD 0x04 /* forward packets */
uint8_t ms_flags;
struct mtx ms_rt_lock;
struct callout ms_cleantimer;
TAILQ_HEAD(, ieee80211_mesh_route) ms_routes;
struct ieee80211_mesh_proto_metric *ms_pmetric;
struct ieee80211_mesh_proto_path *ms_ppath;
};
void ieee80211_mesh_attach(struct ieee80211com *);
void ieee80211_mesh_detach(struct ieee80211com *);
struct ieee80211_mesh_route *
ieee80211_mesh_rt_find(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
struct ieee80211_mesh_route *
ieee80211_mesh_rt_add(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
void ieee80211_mesh_rt_del(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
void ieee80211_mesh_rt_flush(struct ieee80211vap *);
void ieee80211_mesh_rt_flush_peer(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
void ieee80211_mesh_proxy_check(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
int ieee80211_mesh_register_proto_path(const
struct ieee80211_mesh_proto_path *);
int ieee80211_mesh_register_proto_metric(const
struct ieee80211_mesh_proto_metric *);
uint8_t * ieee80211_add_meshpeerver(uint8_t *, struct ieee80211vap *);
uint8_t * ieee80211_add_meshid(uint8_t *, struct ieee80211vap *);
uint8_t * ieee80211_add_meshconf(uint8_t *, struct ieee80211vap *);
uint8_t * ieee80211_add_meshpeer(uint8_t *, uint8_t, uint16_t, uint16_t,
uint16_t);
uint8_t * ieee80211_add_meshlmetric(uint8_t *, uint32_t);
void ieee80211_mesh_node_init(struct ieee80211vap *,
struct ieee80211_node *);
void ieee80211_mesh_node_cleanup(struct ieee80211_node *);
void ieee80211_parse_meshid(struct ieee80211_node *,
const uint8_t *);
struct ieee80211_scanparams;
void ieee80211_mesh_init_neighbor(struct ieee80211_node *,
const struct ieee80211_frame *,
const struct ieee80211_scanparams *);
/*
* Return non-zero if proxy operation is enabled.
*/
static __inline int
ieee80211_mesh_isproxyena(struct ieee80211vap *vap)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
return (ms->ms_flags &
(IEEE80211_MESHFLAGS_AP | IEEE80211_MESHFLAGS_PORTAL)) != 0;
}
/*
* Process an outbound frame: if a path is known to the
* destination then return a reference to the next hop
* for immediate transmission. Otherwise initiate path
* discovery and, if possible queue the packet to be
* sent when path discovery completes.
*/
static __inline struct ieee80211_node *
ieee80211_mesh_discover(struct ieee80211vap *vap,
const uint8_t dest[IEEE80211_ADDR_LEN], struct mbuf *m)
{
struct ieee80211_mesh_state *ms = vap->iv_mesh;
return ms->ms_ppath->mpp_discover(vap, dest, m);
}
#endif /* _KERNEL */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_MESH_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_monitor.h
-35
View File
@@ -1,35 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_MONITOR_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_MONITOR_H_
/*
* Monitor implementation definitions.
*/
void ieee80211_monitor_attach(struct ieee80211com *);
void ieee80211_monitor_detach(struct ieee80211com *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_MONITOR_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_node.h
-453
View File
@@ -1,453 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_NODE_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_NODE_H_
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_nodestats */
#include <net80211/ieee80211_ht.h> /* for aggregation state */
/*
* Each ieee80211com instance has a single timer that fires every
* IEEE80211_INACT_WAIT seconds to handle "inactivity processing".
* This is used to do node inactivity processing when operating
* as an AP, adhoc or mesh mode. For inactivity processing each node
* has a timeout set in it's ni_inact field that is decremented
* on each timeout and the node is reclaimed when the counter goes
* to zero. We use different inactivity timeout values depending
* on whether the node is associated and authorized (either by
* 802.1x or open/shared key authentication) or associated but yet
* to be authorized. The latter timeout is shorter to more aggressively
* reclaim nodes that leave part way through the 802.1x exchange.
*/
#define IEEE80211_INACT_WAIT 15 /* inactivity interval (secs) */
#define IEEE80211_INACT_INIT (30/IEEE80211_INACT_WAIT) /* initial */
#define IEEE80211_INACT_AUTH (180/IEEE80211_INACT_WAIT) /* associated but not authorized */
#define IEEE80211_INACT_RUN (300/IEEE80211_INACT_WAIT) /* authorized */
#define IEEE80211_INACT_PROBE (30/IEEE80211_INACT_WAIT) /* probe */
#define IEEE80211_INACT_SCAN (300/IEEE80211_INACT_WAIT) /* scanned */
#define IEEE80211_TRANS_WAIT 2 /* mgt frame tx timer (secs) */
/* threshold for aging overlapping non-ERP bss */
#define IEEE80211_NONERP_PRESENT_AGE msecs_to_ticks(60*1000)
#define IEEE80211_NODE_HASHSIZE 32 /* NB: hash size must be pow2 */
/* simple hash is enough for variation of macaddr */
#define IEEE80211_NODE_HASH(ic, addr) \
(((const uint8_t *)(addr))[IEEE80211_ADDR_LEN - 1] % \
IEEE80211_NODE_HASHSIZE)
struct ieee80211_node_table;
struct ieee80211com;
struct ieee80211vap;
/*
* Information element ``blob''. We use this structure
* to capture management frame payloads that need to be
* retained. Information elements within the payload that
* we need to consult have references recorded.
*/
struct ieee80211_ies {
/* the following are either NULL or point within data */
uint8_t *wpa_ie; /* captured WPA ie */
uint8_t *rsn_ie; /* captured RSN ie */
uint8_t *wme_ie; /* captured WME ie */
uint8_t *ath_ie; /* captured Atheros ie */
uint8_t *htcap_ie; /* captured HTCAP ie */
uint8_t *htinfo_ie; /* captured HTINFO ie */
uint8_t *tdma_ie; /* captured TDMA ie */
uint8_t *meshid_ie; /* captured MESH ID ie */
uint8_t *spare[4];
/* NB: these must be the last members of this structure */
uint8_t *data; /* frame data > 802.11 header */
int len; /* data size in bytes */
};
/*
* 802.11s (Mesh) Peer Link FSM state.
*/
enum ieee80211_mesh_mlstate {
IEEE80211_NODE_MESH_IDLE = 0,
IEEE80211_NODE_MESH_OPENSNT = 1, /* open frame sent */
IEEE80211_NODE_MESH_OPENRCV = 2, /* open frame received */
IEEE80211_NODE_MESH_CONFIRMRCV = 3, /* confirm frame received */
IEEE80211_NODE_MESH_ESTABLISHED = 4, /* link established */
IEEE80211_NODE_MESH_HOLDING = 5, /* link closing */
};
#define IEEE80211_MESH_MLSTATE_BITS \
"\20\1IDLE\2OPENSNT\2OPENRCV\3CONFIRMRCV\4ESTABLISHED\5HOLDING"
/*
* Node specific information. Note that drivers are expected
* to derive from this structure to add device-specific per-node
* state. This is done by overriding the ic_node_* methods in
* the ieee80211com structure.
*/
struct ieee80211_node {
struct ieee80211vap *ni_vap; /* associated vap */
struct ieee80211com *ni_ic; /* copy from vap to save deref*/
struct ieee80211_node_table *ni_table; /* NB: may be NULL */
TAILQ_ENTRY(ieee80211_node) ni_list; /* list of all nodes */
LIST_ENTRY(ieee80211_node) ni_hash; /* hash collision list */
u_int ni_refcnt; /* count of held references */
u_int ni_scangen; /* gen# for timeout scan */
u_int ni_flags;
#define IEEE80211_NODE_AUTH 0x000001 /* authorized for data */
#define IEEE80211_NODE_QOS 0x000002 /* QoS enabled */
#define IEEE80211_NODE_ERP 0x000004 /* ERP enabled */
/* NB: this must have the same value as IEEE80211_FC1_PWR_MGT */
#define IEEE80211_NODE_PWR_MGT 0x000010 /* power save mode enabled */
#define IEEE80211_NODE_AREF 0x000020 /* authentication ref held */
#define IEEE80211_NODE_HT 0x000040 /* HT enabled */
#define IEEE80211_NODE_HTCOMPAT 0x000080 /* HT setup w/ vendor OUI's */
#define IEEE80211_NODE_WPS 0x000100 /* WPS association */
#define IEEE80211_NODE_TSN 0x000200 /* TSN association */
#define IEEE80211_NODE_AMPDU_RX 0x000400 /* AMPDU rx enabled */
#define IEEE80211_NODE_AMPDU_TX 0x000800 /* AMPDU tx enabled */
#define IEEE80211_NODE_MIMO_PS 0x001000 /* MIMO power save enabled */
#define IEEE80211_NODE_MIMO_RTS 0x002000 /* send RTS in MIMO PS */
#define IEEE80211_NODE_RIFS 0x004000 /* RIFS enabled */
#define IEEE80211_NODE_SGI20 0x008000 /* Short GI in HT20 enabled */
#define IEEE80211_NODE_SGI40 0x010000 /* Short GI in HT40 enabled */
#define IEEE80211_NODE_ASSOCID 0x020000 /* xmit requires associd */
#define IEEE80211_NODE_AMSDU_RX 0x040000 /* AMSDU rx enabled */
#define IEEE80211_NODE_AMSDU_TX 0x080000 /* AMSDU tx enabled */
uint16_t ni_associd; /* association ID */
uint16_t ni_vlan; /* vlan tag */
uint16_t ni_txpower; /* current transmit power */
uint8_t ni_authmode; /* authentication algorithm */
uint8_t ni_ath_flags; /* Atheros feature flags */
/* NB: These must have the same values as IEEE80211_ATHC_* */
#define IEEE80211_NODE_TURBOP 0x0001 /* Turbo prime enable */
#define IEEE80211_NODE_COMP 0x0002 /* Compresssion enable */
#define IEEE80211_NODE_FF 0x0004 /* Fast Frame capable */
#define IEEE80211_NODE_XR 0x0008 /* Atheros WME enable */
#define IEEE80211_NODE_AR 0x0010 /* AR capable */
#define IEEE80211_NODE_BOOST 0x0080 /* Dynamic Turbo boosted */
uint16_t ni_ath_defkeyix;/* Atheros def key index */
const struct ieee80211_txparam *ni_txparms;
uint32_t ni_jointime; /* time of join (secs) */
uint32_t *ni_challenge; /* shared-key challenge */
struct ieee80211_ies ni_ies; /* captured ie's */
/* tx seq per-tid */
ieee80211_seq ni_txseqs[IEEE80211_TID_SIZE];
/* rx seq previous per-tid*/
ieee80211_seq ni_rxseqs[IEEE80211_TID_SIZE];
uint32_t ni_rxfragstamp; /* time stamp of last rx frag */
struct mbuf *ni_rxfrag[3]; /* rx frag reassembly */
struct ieee80211_key ni_ucastkey; /* unicast key */
/* hardware */
uint32_t ni_avgrssi; /* recv ssi state */
int8_t ni_noise; /* noise floor */
/* header */
uint8_t ni_macaddr[IEEE80211_ADDR_LEN];
uint8_t ni_bssid[IEEE80211_ADDR_LEN];
/* beacon, probe response */
union {
uint8_t data[8];
u_int64_t tsf;
} ni_tstamp; /* from last rcv'd beacon */
uint16_t ni_intval; /* beacon interval */
uint16_t ni_capinfo; /* capabilities */
uint8_t ni_esslen;
uint8_t ni_essid[IEEE80211_NWID_LEN];
struct ieee80211_rateset ni_rates; /* negotiated rate set */
struct ieee80211_channel *ni_chan;
uint16_t ni_fhdwell; /* FH only */
uint8_t ni_fhindex; /* FH only */
uint16_t ni_erp; /* ERP from beacon/probe resp */
uint16_t ni_timoff; /* byte offset to TIM ie */
uint8_t ni_dtim_period; /* DTIM period */
uint8_t ni_dtim_count; /* DTIM count for last bcn */
/* 11s state */
uint8_t ni_meshidlen;
uint8_t ni_meshid[IEEE80211_MESHID_LEN];
enum ieee80211_mesh_mlstate ni_mlstate; /* peering management state */
uint16_t ni_mllid; /* link local ID */
uint16_t ni_mlpid; /* link peer ID */
struct callout ni_mltimer; /* link mesh timer */
uint8_t ni_mlrcnt; /* link mesh retry counter */
uint8_t ni_mltval; /* link mesh timer value */
/* 11n state */
uint16_t ni_htcap; /* HT capabilities */
uint8_t ni_htparam; /* HT params */
uint8_t ni_htctlchan; /* HT control channel */
uint8_t ni_ht2ndchan; /* HT 2nd channel */
uint8_t ni_htopmode; /* HT operating mode */
uint8_t ni_htstbc; /* HT */
uint8_t ni_chw; /* negotiated channel width */
struct ieee80211_htrateset ni_htrates; /* negotiated ht rate set */
struct ieee80211_tx_ampdu ni_tx_ampdu[WME_NUM_AC];
struct ieee80211_rx_ampdu ni_rx_ampdu[WME_NUM_TID];
/* others */
short ni_inact; /* inactivity mark count */
short ni_inact_reload;/* inactivity reload value */
int ni_txrate; /* legacy rate/MCS */
struct ieee80211_psq ni_psq; /* power save queue */
struct ieee80211_nodestats ni_stats; /* per-node statistics */
struct ieee80211vap *ni_wdsvap; /* associated WDS vap */
uint64_t ni_spare[4];
};
#define IEEE80211_NODE_ATH (IEEE80211_NODE_FF | IEEE80211_NODE_TURBOP)
#define IEEE80211_NODE_AMPDU \
(IEEE80211_NODE_AMPDU_RX | IEEE80211_NODE_AMPDU_TX)
#define IEEE80211_NODE_AMSDU \
(IEEE80211_NODE_AMSDU_RX | IEEE80211_NODE_AMSDU_TX)
#define IEEE80211_NODE_HT_ALL \
(IEEE80211_NODE_HT | IEEE80211_NODE_HTCOMPAT | \
IEEE80211_NODE_AMPDU | IEEE80211_NODE_AMSDU | \
IEEE80211_NODE_MIMO_PS | IEEE80211_NODE_MIMO_RTS | \
IEEE80211_NODE_RIFS | IEEE80211_NODE_SGI20 | IEEE80211_NODE_SGI40)
#define IEEE80211_NODE_BITS \
"\20\1AUTH\2QOS\3ERP\5PWR_MGT\6AREF\7HT\10HTCOMPAT\11WPS\12TSN" \
"\13AMPDU_RX\14AMPDU_TX\15MIMO_PS\16MIMO_RTS\17RIFS\20SGI20\21SGI40" \
"\22ASSOCID"
#define IEEE80211_NODE_AID(ni) IEEE80211_AID(ni->ni_associd)
#define IEEE80211_NODE_STAT(ni,stat) (ni->ni_stats.ns_##stat++)
#define IEEE80211_NODE_STAT_ADD(ni,stat,v) (ni->ni_stats.ns_##stat += v)
#define IEEE80211_NODE_STAT_SET(ni,stat,v) (ni->ni_stats.ns_##stat = v)
/*
* Filtered rssi calculation support. The receive rssi is maintained
* as an average over the last 10 frames received using a low pass filter
* (all frames for now, possibly need to be more selective). Calculations
* are designed such that a good compiler can optimize them. The avg
* rssi state should be initialized to IEEE80211_RSSI_DUMMY_MARKER and
* each sample incorporated with IEEE80211_RSSI_LPF. Use IEEE80211_RSSI_GET
* to extract the current value.
*
* Note that we assume rssi data are in the range [-127..127] and we
* discard values <-20. This is consistent with assumptions throughout
* net80211 that signal strength data are in .5 dBm units relative to
* the current noise floor (linear, not log).
*/
#define IEEE80211_RSSI_LPF_LEN 10
#define IEEE80211_RSSI_DUMMY_MARKER 127
/* NB: pow2 to optimize out * and / */
#define IEEE80211_RSSI_EP_MULTIPLIER (1<<7)
#define IEEE80211_RSSI_IN(x) ((x) * IEEE80211_RSSI_EP_MULTIPLIER)
#define _IEEE80211_RSSI_LPF(x, y, len) \
(((x) != IEEE80211_RSSI_DUMMY_MARKER) ? (((x) * ((len) - 1) + (y)) / (len)) : (y))
#define IEEE80211_RSSI_LPF(x, y) do { \
if ((y) >= -20) { \
x = _IEEE80211_RSSI_LPF((x), IEEE80211_RSSI_IN((y)), \
IEEE80211_RSSI_LPF_LEN); \
} \
} while (0)
#define IEEE80211_RSSI_EP_RND(x, mul) \
((((x) % (mul)) >= ((mul)/2)) ? ((x) + ((mul) - 1)) / (mul) : (x)/(mul))
#define IEEE80211_RSSI_GET(x) \
IEEE80211_RSSI_EP_RND(x, IEEE80211_RSSI_EP_MULTIPLIER)
static __inline struct ieee80211_node *
ieee80211_ref_node(struct ieee80211_node *ni)
{
ieee80211_node_incref(ni);
return ni;
}
static __inline void
ieee80211_unref_node(struct ieee80211_node **ni)
{
ieee80211_node_decref(*ni);
*ni = NULL; /* guard against use */
}
struct ieee80211com;
void ieee80211_node_attach(struct ieee80211com *);
void ieee80211_node_lateattach(struct ieee80211com *);
void ieee80211_node_detach(struct ieee80211com *);
void ieee80211_node_vattach(struct ieee80211vap *);
void ieee80211_node_latevattach(struct ieee80211vap *);
void ieee80211_node_vdetach(struct ieee80211vap *);
static __inline int
ieee80211_node_is_authorized(const struct ieee80211_node *ni)
{
return (ni->ni_flags & IEEE80211_NODE_AUTH);
}
void ieee80211_node_authorize(struct ieee80211_node *);
void ieee80211_node_unauthorize(struct ieee80211_node *);
void ieee80211_node_setuptxparms(struct ieee80211_node *);
void ieee80211_node_set_chan(struct ieee80211_node *,
struct ieee80211_channel *);
void ieee80211_create_ibss(struct ieee80211vap*, struct ieee80211_channel *);
void ieee80211_reset_bss(struct ieee80211vap *);
void ieee80211_sync_curchan(struct ieee80211com *);
void ieee80211_setupcurchan(struct ieee80211com *,
struct ieee80211_channel *);
void ieee80211_setcurchan(struct ieee80211com *, struct ieee80211_channel *);
int ieee80211_ibss_merge(struct ieee80211_node *);
struct ieee80211_scan_entry;
int ieee80211_sta_join(struct ieee80211vap *, struct ieee80211_channel *,
const struct ieee80211_scan_entry *);
void ieee80211_sta_leave(struct ieee80211_node *);
void ieee80211_node_deauth(struct ieee80211_node *, int);
int ieee80211_ies_init(struct ieee80211_ies *, const uint8_t *, int);
void ieee80211_ies_cleanup(struct ieee80211_ies *);
void ieee80211_ies_expand(struct ieee80211_ies *);
#define ieee80211_ies_setie(_ies, _ie, _off) do { \
(_ies)._ie = (_ies).data + (_off); \
} while (0)
/*
* Table of ieee80211_node instances. Each ieee80211com
* has one that holds association stations (when operating
* as an ap) or neighbors (in ibss mode).
*
* XXX embed this in ieee80211com instead of indirect?
*/
struct ieee80211_node_table {
struct ieee80211com *nt_ic; /* back reference */
ieee80211_node_lock_t nt_nodelock; /* on node table */
TAILQ_HEAD(, ieee80211_node) nt_node; /* information of all nodes */
LIST_HEAD(, ieee80211_node) nt_hash[IEEE80211_NODE_HASHSIZE];
struct ieee80211_node **nt_keyixmap; /* key ix -> node map */
int nt_keyixmax; /* keyixmap size */
const char *nt_name; /* table name for debug msgs */
ieee80211_scan_lock_t nt_scanlock; /* on nt_scangen */
u_int nt_scangen; /* gen# for iterators */
int nt_inact_init; /* initial node inact setting */
};
struct ieee80211_node *ieee80211_alloc_node(struct ieee80211_node_table *,
struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_tmp_node(struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_dup_bss(struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_node_create_wds(struct ieee80211vap *,
const uint8_t bssid[IEEE80211_ADDR_LEN],
struct ieee80211_channel *);
#ifdef IEEE80211_DEBUG_REFCNT
void ieee80211_free_node_debug(struct ieee80211_node *,
const char *func, int line);
struct ieee80211_node *ieee80211_find_node_locked_debug(
struct ieee80211_node_table *,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line);
struct ieee80211_node *ieee80211_find_node_debug(struct ieee80211_node_table *,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line);
struct ieee80211_node *ieee80211_find_vap_node_locked_debug(
struct ieee80211_node_table *,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line);
struct ieee80211_node *ieee80211_find_vap_node_debug(
struct ieee80211_node_table *,
const struct ieee80211vap *vap,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
const char *func, int line);
struct ieee80211_node * ieee80211_find_rxnode_debug(struct ieee80211com *,
const struct ieee80211_frame_min *,
const char *func, int line);
struct ieee80211_node * ieee80211_find_rxnode_withkey_debug(
struct ieee80211com *,
const struct ieee80211_frame_min *, uint16_t keyix,
const char *func, int line);
struct ieee80211_node *ieee80211_find_txnode_debug(struct ieee80211vap *,
const uint8_t *,
const char *func, int line);
#define ieee80211_free_node(ni) \
ieee80211_free_node_debug(ni, __func__, __LINE__)
#define ieee80211_find_node_locked(nt, mac) \
ieee80211_find_node_locked_debug(nt, mac, __func__, __LINE__)
#define ieee80211_find_node(nt, mac) \
ieee80211_find_node_debug(nt, mac, __func__, __LINE__)
#define ieee80211_find_vap_node_locked(nt, vap, mac) \
ieee80211_find_vap_node_locked_debug(nt, vap, mac, __func__, __LINE__)
#define ieee80211_find_vap_node(nt, vap, mac) \
ieee80211_find_vap_node_debug(nt, vap, mac, __func__, __LINE__)
#define ieee80211_find_rxnode(ic, wh) \
ieee80211_find_rxnode_debug(ic, wh, __func__, __LINE__)
#define ieee80211_find_rxnode_withkey(ic, wh, keyix) \
ieee80211_find_rxnode_withkey_debug(ic, wh, keyix, __func__, __LINE__)
#define ieee80211_find_txnode(vap, mac) \
ieee80211_find_txnode_debug(vap, mac, __func__, __LINE__)
#else
void ieee80211_free_node(struct ieee80211_node *);
struct ieee80211_node *ieee80211_find_node_locked(struct ieee80211_node_table *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_find_node(struct ieee80211_node_table *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_find_vap_node_locked(
struct ieee80211_node_table *, const struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node *ieee80211_find_vap_node(
struct ieee80211_node_table *, const struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_node * ieee80211_find_rxnode(struct ieee80211com *,
const struct ieee80211_frame_min *);
struct ieee80211_node * ieee80211_find_rxnode_withkey(struct ieee80211com *,
const struct ieee80211_frame_min *, uint16_t keyix);
struct ieee80211_node *ieee80211_find_txnode(struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
#endif
int ieee80211_node_delucastkey(struct ieee80211_node *);
void ieee80211_node_timeout(void *arg);
typedef void ieee80211_iter_func(void *, struct ieee80211_node *);
void ieee80211_iterate_nodes(struct ieee80211_node_table *,
ieee80211_iter_func *, void *);
void ieee80211_notify_erp(struct ieee80211com *);
void ieee80211_dump_node(struct ieee80211_node_table *,
struct ieee80211_node *);
void ieee80211_dump_nodes(struct ieee80211_node_table *);
struct ieee80211_node *ieee80211_fakeup_adhoc_node(struct ieee80211vap *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
struct ieee80211_scanparams;
void ieee80211_init_neighbor(struct ieee80211_node *,
const struct ieee80211_frame *,
const struct ieee80211_scanparams *);
struct ieee80211_node *ieee80211_add_neighbor(struct ieee80211vap *,
const struct ieee80211_frame *,
const struct ieee80211_scanparams *);
void ieee80211_node_join(struct ieee80211_node *,int);
void ieee80211_node_leave(struct ieee80211_node *);
int8_t ieee80211_getrssi(struct ieee80211vap *);
void ieee80211_getsignal(struct ieee80211vap *, int8_t *, int8_t *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_NODE_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_phy.h
-157
View File
@@ -1,157 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_PHY_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_PHY_H_
#ifdef _KERNEL
/*
* IEEE 802.11 PHY-related definitions.
*/
void ieee80211_phy_init(void);
/*
* Contention window (slots).
*/
#define IEEE80211_CW_MAX 1023 /* aCWmax */
#define IEEE80211_CW_MIN_0 31 /* DS/CCK aCWmin, ERP aCWmin(0) */
#define IEEE80211_CW_MIN_1 15 /* OFDM aCWmin, ERP aCWmin(1) */
/*
* SIFS (microseconds).
*/
#define IEEE80211_DUR_SIFS 10 /* DS/CCK/ERP SIFS */
#define IEEE80211_DUR_OFDM_SIFS 16 /* OFDM SIFS */
/*
* Slot time (microseconds).
*/
#define IEEE80211_DUR_SLOT 20 /* DS/CCK slottime, ERP long slottime */
#define IEEE80211_DUR_SHSLOT 9 /* ERP short slottime */
#define IEEE80211_DUR_OFDM_SLOT 9 /* OFDM slottime */
/*
* DIFS (microseconds).
*/
#define IEEE80211_DUR_DIFS(sifs, slot) ((sifs) + 2 * (slot))
struct ieee80211_channel;
struct ieee80211_rate_table {
int rateCount; /* NB: for proper padding */
uint8_t rateCodeToIndex[256]; /* back mapping */
struct {
uint8_t phy; /* CCK/OFDM/TURBO */
uint32_t rateKbps; /* transfer rate in kbs */
uint8_t shortPreamble; /* mask for enabling short
* preamble in CCK rate code */
uint8_t dot11Rate; /* value for supported rates
* info element of MLME */
uint8_t ctlRateIndex; /* index of next lower basic
* rate; used for dur. calcs */
uint16_t lpAckDuration; /* long preamble ACK dur. */
uint16_t spAckDuration; /* short preamble ACK dur. */
} info[32];
};
const struct ieee80211_rate_table *ieee80211_get_ratetable(
struct ieee80211_channel *);
static __inline__ uint8_t
ieee80211_ack_rate(const struct ieee80211_rate_table *rt, uint8_t rate)
{
uint8_t cix = rt->info[rt->rateCodeToIndex[rate]].ctlRateIndex;
KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate));
return rt->info[cix].dot11Rate;
}
static __inline__ uint8_t
ieee80211_ctl_rate(const struct ieee80211_rate_table *rt, uint8_t rate)
{
uint8_t cix = rt->info[rt->rateCodeToIndex[rate]].ctlRateIndex;
KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate));
return rt->info[cix].dot11Rate;
}
static __inline__ enum ieee80211_phytype
ieee80211_rate2phytype(const struct ieee80211_rate_table *rt, uint8_t rate)
{
uint8_t rix = rt->rateCodeToIndex[rate];
KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
return rt->info[rix].phy;
}
static __inline__ int
ieee80211_isratevalid(const struct ieee80211_rate_table *rt, uint8_t rate)
{
return rt->rateCodeToIndex[rate] != (uint8_t)-1;
}
/*
* Calculate ACK field for
* o non-fragment data frames
* o management frames
* sent using rate, phy and short preamble setting.
*/
static __inline__ uint16_t
ieee80211_ack_duration(const struct ieee80211_rate_table *rt,
uint8_t rate, int isShortPreamble)
{
uint8_t rix = rt->rateCodeToIndex[rate];
KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
if (isShortPreamble) {
KASSERT(rt->info[rix].spAckDuration != 0,
("shpreamble ack dur is not computed!\n"));
return rt->info[rix].spAckDuration;
} else {
KASSERT(rt->info[rix].lpAckDuration != 0,
("lgpreamble ack dur is not computed!\n"));
return rt->info[rix].lpAckDuration;
}
}
/*
* Compute the time to transmit a frame of length frameLen bytes
* using the specified 802.11 rate code, phy, and short preamble
* setting.
*
* NB: SIFS is included.
*/
uint16_t ieee80211_compute_duration(const struct ieee80211_rate_table *,
uint32_t frameLen, uint16_t rate, int isShortPreamble);
/*
* Convert PLCP signal/rate field to 802.11 rate code (.5Mbits/s)
*/
uint8_t ieee80211_plcp2rate(uint8_t, enum ieee80211_phytype);
/*
* Convert 802.11 rate code to PLCP signal.
*/
uint8_t ieee80211_rate2plcp(int, enum ieee80211_phytype);
#endif /* _KERNEL */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_PHY_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_power.h
-79
View File
@@ -1,79 +0,0 @@
/*-
* Copyright (c) 2002-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_POWER_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_POWER_H_
struct ieee80211com;
struct ieee80211vap;
struct ieee80211_node;
struct mbuf;
/*
* Power save packet queues. There are two queues, one
* for frames coming from the net80211 layer and the other
* for frames that come from the driver. Frames from the
* driver are expected to have M_ENCAP marked to indicate
* they have already been encapsulated and are treated as
* higher priority: they are sent first when flushing the
* queue on a power save state change or in response to a
* ps-poll frame.
*
* Note that frames sent from the high priority queue are
* fed directly to the driver without going through
* ieee80211_start again; drivers that send up encap'd
* frames are required to handle them when they come back.
*/
struct ieee80211_psq {
ieee80211_psq_lock_t psq_lock;
int psq_len;
int psq_maxlen;
int psq_drops;
struct ieee80211_psq_head {
struct mbuf *head;
struct mbuf *tail;
int len;
} psq_head[2]; /* 2 priorities */
};
void ieee80211_psq_init(struct ieee80211_psq *, const char *);
void ieee80211_psq_cleanup(struct ieee80211_psq *);
void ieee80211_power_attach(struct ieee80211com *);
void ieee80211_power_detach(struct ieee80211com *);
void ieee80211_power_vattach(struct ieee80211vap *);
void ieee80211_power_vdetach(struct ieee80211vap *);
void ieee80211_power_latevattach(struct ieee80211vap *);
struct mbuf *ieee80211_node_psq_dequeue(struct ieee80211_node *ni, int *qlen);
int ieee80211_node_psq_drain(struct ieee80211_node *);
int ieee80211_node_psq_age(struct ieee80211_node *);
int ieee80211_pwrsave(struct ieee80211_node *, struct mbuf *);
void ieee80211_node_pwrsave(struct ieee80211_node *, int enable);
void ieee80211_sta_pwrsave(struct ieee80211vap *, int enable);
void ieee80211_power_poll(struct ieee80211com *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_POWER_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_proto.h
-387
View File
@@ -1,387 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_PROTO_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_PROTO_H_
/*
* 802.11 protocol implementation definitions.
*/
void ieee80211_auth_setup(void);
enum ieee80211_state {
IEEE80211_S_INIT = 0, /* default state */
IEEE80211_S_SCAN = 1, /* scanning */
IEEE80211_S_AUTH = 2, /* try to authenticate */
IEEE80211_S_ASSOC = 3, /* try to assoc */
IEEE80211_S_CAC = 4, /* doing channel availability check */
IEEE80211_S_RUN = 5, /* operational (e.g. associated) */
IEEE80211_S_CSA = 6, /* channel switch announce pending */
IEEE80211_S_SLEEP = 7, /* power save */
};
#define IEEE80211_S_MAX (IEEE80211_S_SLEEP+1)
#define IEEE80211_SEND_MGMT(_ni,_type,_arg) \
((*(_ni)->ni_ic->ic_send_mgmt)(_ni, _type, _arg))
extern const char *ieee80211_mgt_subtype_name[];
extern const char *ieee80211_phymode_name[IEEE80211_MODE_MAX];
extern const int ieee80211_opcap[IEEE80211_OPMODE_MAX];
void ieee80211_proto_attach(struct ieee80211com *);
void ieee80211_proto_detach(struct ieee80211com *);
void ieee80211_proto_vattach(struct ieee80211vap *);
void ieee80211_proto_vdetach(struct ieee80211vap *);
void ieee80211_syncifflag_locked(struct ieee80211com *, int flag);
void ieee80211_syncflag(struct ieee80211vap *, int flag);
void ieee80211_syncflag_ht(struct ieee80211vap *, int flag);
void ieee80211_syncflag_ext(struct ieee80211vap *, int flag);
#define ieee80211_input(ni, m, rssi, nf) \
((ni)->ni_vap->iv_input(ni, m, rssi, nf))
int ieee80211_input_all(struct ieee80211com *, struct mbuf *, int, int);
struct ieee80211_bpf_params;
int ieee80211_mgmt_output(struct ieee80211_node *, struct mbuf *, int,
struct ieee80211_bpf_params *);
int ieee80211_raw_xmit(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_bpf_params *);
int ieee80211_output(struct ifnet *, struct mbuf *,
struct sockaddr *, struct route *ro);
void ieee80211_send_setup(struct ieee80211_node *, struct mbuf *, int, int,
const uint8_t [IEEE80211_ADDR_LEN], const uint8_t [IEEE80211_ADDR_LEN],
const uint8_t [IEEE80211_ADDR_LEN]);
void ieee80211_start(struct ifnet *);
int ieee80211_send_nulldata(struct ieee80211_node *);
int ieee80211_classify(struct ieee80211_node *, struct mbuf *m);
struct mbuf *ieee80211_mbuf_adjust(struct ieee80211vap *, int,
struct ieee80211_key *, struct mbuf *);
struct mbuf *ieee80211_encap(struct ieee80211vap *, struct ieee80211_node *,
struct mbuf *);
int ieee80211_send_mgmt(struct ieee80211_node *, int, int);
struct ieee80211_appie;
int ieee80211_send_probereq(struct ieee80211_node *ni,
const uint8_t sa[IEEE80211_ADDR_LEN],
const uint8_t da[IEEE80211_ADDR_LEN],
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t *ssid, size_t ssidlen);
/*
* The formation of ProbeResponse frames requires guidance to
* deal with legacy clients. When the client is identified as
* "legacy 11b" ieee80211_send_proberesp is passed this token.
*/
#define IEEE80211_SEND_LEGACY_11B 0x1 /* legacy 11b client */
#define IEEE80211_SEND_LEGACY_11 0x2 /* other legacy client */
#define IEEE80211_SEND_LEGACY 0x3 /* any legacy client */
struct mbuf *ieee80211_alloc_proberesp(struct ieee80211_node *, int);
int ieee80211_send_proberesp(struct ieee80211vap *,
const uint8_t da[IEEE80211_ADDR_LEN], int);
struct mbuf *ieee80211_alloc_rts(struct ieee80211com *ic,
const uint8_t [IEEE80211_ADDR_LEN],
const uint8_t [IEEE80211_ADDR_LEN], uint16_t);
struct mbuf *ieee80211_alloc_cts(struct ieee80211com *,
const uint8_t [IEEE80211_ADDR_LEN], uint16_t);
uint8_t *ieee80211_add_rates(uint8_t *, const struct ieee80211_rateset *);
uint8_t *ieee80211_add_xrates(uint8_t *, const struct ieee80211_rateset *);
uint16_t ieee80211_getcapinfo(struct ieee80211vap *,
struct ieee80211_channel *);
void ieee80211_reset_erp(struct ieee80211com *);
void ieee80211_set_shortslottime(struct ieee80211com *, int onoff);
int ieee80211_iserp_rateset(const struct ieee80211_rateset *);
void ieee80211_setbasicrates(struct ieee80211_rateset *,
enum ieee80211_phymode);
void ieee80211_addbasicrates(struct ieee80211_rateset *,
enum ieee80211_phymode);
/*
* Return the size of the 802.11 header for a management or data frame.
*/
static __inline int
ieee80211_hdrsize(const void *data)
{
const struct ieee80211_frame *wh = data;
int size = sizeof(struct ieee80211_frame);
/* NB: we don't handle control frames */
KASSERT((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) != IEEE80211_FC0_TYPE_CTL,
("%s: control frame", __func__));
if (IEEE80211_IS_DSTODS(wh))
size += IEEE80211_ADDR_LEN;
if (IEEE80211_QOS_HAS_SEQ(wh))
size += sizeof(uint16_t);
return size;
}
/*
* Like ieee80211_hdrsize, but handles any type of frame.
*/
static __inline int
ieee80211_anyhdrsize(const void *data)
{
const struct ieee80211_frame *wh = data;
if ((wh->i_fc[0]&IEEE80211_FC0_TYPE_MASK) == IEEE80211_FC0_TYPE_CTL) {
switch (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) {
case IEEE80211_FC0_SUBTYPE_CTS:
case IEEE80211_FC0_SUBTYPE_ACK:
return sizeof(struct ieee80211_frame_ack);
case IEEE80211_FC0_SUBTYPE_BAR:
return sizeof(struct ieee80211_frame_bar);
}
return sizeof(struct ieee80211_frame_min);
} else
return ieee80211_hdrsize(data);
}
/*
* Template for an in-kernel authenticator. Authenticators
* register with the protocol code and are typically loaded
* as separate modules as needed. One special authenticator
* is xauth; it intercepts requests so that protocols like
* WPA can be handled in user space.
*/
struct ieee80211_authenticator {
const char *ia_name; /* printable name */
int (*ia_attach)(struct ieee80211vap *);
void (*ia_detach)(struct ieee80211vap *);
void (*ia_node_join)(struct ieee80211_node *);
void (*ia_node_leave)(struct ieee80211_node *);
};
void ieee80211_authenticator_register(int type,
const struct ieee80211_authenticator *);
void ieee80211_authenticator_unregister(int type);
const struct ieee80211_authenticator *ieee80211_authenticator_get(int auth);
struct ieee80211req;
/*
* Template for an MAC ACL policy module. Such modules
* register with the protocol code and are passed the sender's
* address of each received auth frame for validation.
*/
struct ieee80211_aclator {
const char *iac_name; /* printable name */
int (*iac_attach)(struct ieee80211vap *);
void (*iac_detach)(struct ieee80211vap *);
int (*iac_check)(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_add)(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_remove)(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
int (*iac_flush)(struct ieee80211vap *);
int (*iac_setpolicy)(struct ieee80211vap *, int);
int (*iac_getpolicy)(struct ieee80211vap *);
int (*iac_setioctl)(struct ieee80211vap *, struct ieee80211req *);
int (*iac_getioctl)(struct ieee80211vap *, struct ieee80211req *);
};
void ieee80211_aclator_register(const struct ieee80211_aclator *);
void ieee80211_aclator_unregister(const struct ieee80211_aclator *);
const struct ieee80211_aclator *ieee80211_aclator_get(const char *name);
/* flags for ieee80211_fix_rate() */
#define IEEE80211_F_DOSORT 0x00000001 /* sort rate list */
#define IEEE80211_F_DOFRATE 0x00000002 /* use fixed legacy rate */
#define IEEE80211_F_DONEGO 0x00000004 /* calc negotiated rate */
#define IEEE80211_F_DODEL 0x00000008 /* delete ignore rate */
#define IEEE80211_F_DOBRS 0x00000010 /* check basic rate set */
#define IEEE80211_F_JOIN 0x00000020 /* sta joining our bss */
#define IEEE80211_F_DOFMCS 0x00000040 /* use fixed HT rate */
int ieee80211_fix_rate(struct ieee80211_node *,
struct ieee80211_rateset *, int);
/*
* WME/WMM support.
*/
struct wmeParams {
uint8_t wmep_acm;
uint8_t wmep_aifsn;
uint8_t wmep_logcwmin; /* log2(cwmin) */
uint8_t wmep_logcwmax; /* log2(cwmax) */
uint8_t wmep_txopLimit;
uint8_t wmep_noackPolicy; /* 0 (ack), 1 (no ack) */
};
#define IEEE80211_TXOP_TO_US(_txop) ((_txop)<<5)
#define IEEE80211_US_TO_TXOP(_us) ((_us)>>5)
struct chanAccParams {
uint8_t cap_info; /* version of the current set */
struct wmeParams cap_wmeParams[WME_NUM_AC];
};
struct ieee80211_wme_state {
u_int wme_flags;
#define WME_F_AGGRMODE 0x00000001 /* STATUS: WME agressive mode */
u_int wme_hipri_traffic; /* VI/VO frames in beacon interval */
u_int wme_hipri_switch_thresh;/* agressive mode switch thresh */
u_int wme_hipri_switch_hysteresis;/* agressive mode switch hysteresis */
struct wmeParams wme_params[4]; /* from assoc resp for each AC*/
struct chanAccParams wme_wmeChanParams; /* WME params applied to self */
struct chanAccParams wme_wmeBssChanParams;/* WME params bcast to stations */
struct chanAccParams wme_chanParams; /* params applied to self */
struct chanAccParams wme_bssChanParams; /* params bcast to stations */
int (*wme_update)(struct ieee80211com *);
};
void ieee80211_wme_initparams(struct ieee80211vap *);
void ieee80211_wme_updateparams(struct ieee80211vap *);
void ieee80211_wme_updateparams_locked(struct ieee80211vap *);
/*
* Return the WME TID from a QoS frame. If no TID
* is present return the index for the "non-QoS" entry.
*/
static __inline uint8_t
ieee80211_gettid(const struct ieee80211_frame *wh)
{
uint8_t tid;
if (IEEE80211_QOS_HAS_SEQ(wh)) {
if (IEEE80211_IS_DSTODS(wh))
tid = ((const struct ieee80211_qosframe_addr4 *)wh)->
i_qos[0];
else
tid = ((const struct ieee80211_qosframe *)wh)->i_qos[0];
tid &= IEEE80211_QOS_TID;
} else
tid = IEEE80211_NONQOS_TID;
return tid;
}
void ieee80211_waitfor_parent(struct ieee80211com *);
void ieee80211_start_locked(struct ieee80211vap *);
void ieee80211_init(void *);
void ieee80211_start_all(struct ieee80211com *);
void ieee80211_stop_locked(struct ieee80211vap *);
void ieee80211_stop(struct ieee80211vap *);
void ieee80211_stop_all(struct ieee80211com *);
void ieee80211_suspend_all(struct ieee80211com *);
void ieee80211_resume_all(struct ieee80211com *);
void ieee80211_dturbo_switch(struct ieee80211vap *, int newflags);
void ieee80211_swbmiss(void *arg);
void ieee80211_beacon_miss(struct ieee80211com *);
int ieee80211_new_state(struct ieee80211vap *, enum ieee80211_state, int);
void ieee80211_print_essid(const uint8_t *, int);
void ieee80211_dump_pkt(struct ieee80211com *,
const uint8_t *, int, int, int);
extern const char *ieee80211_opmode_name[];
extern const char *ieee80211_state_name[IEEE80211_S_MAX];
extern const char *ieee80211_wme_acnames[];
/*
* Beacon frames constructed by ieee80211_beacon_alloc
* have the following structure filled in so drivers
* can update the frame later w/ minimal overhead.
*/
struct ieee80211_beacon_offsets {
uint8_t bo_flags[4]; /* update/state flags */
uint16_t *bo_caps; /* capabilities */
uint8_t *bo_cfp; /* start of CFParms element */
uint8_t *bo_tim; /* start of atim/dtim */
uint8_t *bo_wme; /* start of WME parameters */
uint8_t *bo_tdma; /* start of TDMA parameters */
uint8_t *bo_tim_trailer;/* start of fixed-size trailer */
uint16_t bo_tim_len; /* atim/dtim length in bytes */
uint16_t bo_tim_trailer_len;/* tim trailer length in bytes */
uint8_t *bo_erp; /* start of ERP element */
uint8_t *bo_htinfo; /* start of HT info element */
uint8_t *bo_ath; /* start of ATH parameters */
uint8_t *bo_appie; /* start of AppIE element */
uint16_t bo_appie_len; /* AppIE length in bytes */
uint16_t bo_csa_trailer_len;;
uint8_t *bo_csa; /* start of CSA element */
uint8_t *bo_spare[4];
};
struct mbuf *ieee80211_beacon_alloc(struct ieee80211_node *,
struct ieee80211_beacon_offsets *);
/*
* Beacon frame updates are signaled through calls to iv_update_beacon
* with one of the IEEE80211_BEACON_* tokens defined below. For devices
* that construct beacon frames on the host this can trigger a rebuild
* or defer the processing. For devices that offload beacon frame
* handling this callback can be used to signal a rebuild. The bo_flags
* array in the ieee80211_beacon_offsets structure is intended to record
* deferred processing requirements; ieee80211_beacon_update uses the
* state to optimize work. Since this structure is owned by the driver
* and not visible to the 802.11 layer drivers must supply an iv_update_beacon
* callback that marks the flag bits and schedules (as necessary) an update.
*/
enum {
IEEE80211_BEACON_CAPS = 0, /* capabilities */
IEEE80211_BEACON_TIM = 1, /* DTIM/ATIM */
IEEE80211_BEACON_WME = 2,
IEEE80211_BEACON_ERP = 3, /* Extended Rate Phy */
IEEE80211_BEACON_HTINFO = 4, /* HT Information */
IEEE80211_BEACON_APPIE = 5, /* Application IE's */
IEEE80211_BEACON_CFP = 6, /* CFParms */
IEEE80211_BEACON_CSA = 7, /* Channel Switch Announcement */
IEEE80211_BEACON_TDMA = 9, /* TDMA Info */
IEEE80211_BEACON_ATH = 10, /* ATH parameters */
};
int ieee80211_beacon_update(struct ieee80211_node *,
struct ieee80211_beacon_offsets *, struct mbuf *, int mcast);
void ieee80211_csa_startswitch(struct ieee80211com *,
struct ieee80211_channel *, int mode, int count);
void ieee80211_csa_completeswitch(struct ieee80211com *);
void ieee80211_csa_cancelswitch(struct ieee80211com *);
void ieee80211_cac_completeswitch(struct ieee80211vap *);
/*
* Notification methods called from the 802.11 state machine.
* Note that while these are defined here, their implementation
* is OS-specific.
*/
void ieee80211_notify_node_join(struct ieee80211_node *, int newassoc);
void ieee80211_notify_node_leave(struct ieee80211_node *);
void ieee80211_notify_scan_done(struct ieee80211vap *);
void ieee80211_notify_wds_discover(struct ieee80211_node *);
void ieee80211_notify_csa(struct ieee80211com *,
const struct ieee80211_channel *, int mode, int count);
void ieee80211_notify_radar(struct ieee80211com *,
const struct ieee80211_channel *);
enum ieee80211_notify_cac_event {
IEEE80211_NOTIFY_CAC_START = 0, /* CAC timer started */
IEEE80211_NOTIFY_CAC_STOP = 1, /* CAC intentionally stopped */
IEEE80211_NOTIFY_CAC_RADAR = 2, /* CAC stopped due to radar detectio */
IEEE80211_NOTIFY_CAC_EXPIRE = 3, /* CAC expired w/o radar */
};
void ieee80211_notify_cac(struct ieee80211com *,
const struct ieee80211_channel *,
enum ieee80211_notify_cac_event);
void ieee80211_notify_node_deauth(struct ieee80211_node *);
void ieee80211_notify_node_auth(struct ieee80211_node *);
void ieee80211_notify_country(struct ieee80211vap *, const uint8_t [],
const uint8_t cc[2]);
void ieee80211_notify_radio(struct ieee80211com *, int);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_PROTO_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_radiotap.h
-234
View File
@@ -1,234 +0,0 @@
/* $FreeBSD$ */
/* $NetBSD: ieee80211_radiotap.h,v 1.16 2007/01/06 05:51:15 dyoung Exp $ */
/*-
* Copyright (c) 2003, 2004 David Young. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of David Young may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY DAVID YOUNG ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL DAVID
* YOUNG BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_RADIOTAP_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_RADIOTAP_H_
/* A generic radio capture format is desirable. It must be
* rigidly defined (e.g., units for fields should be given),
* and easily extensible.
*
* The following is an extensible radio capture format. It is
* based on a bitmap indicating which fields are present.
*
* I am trying to describe precisely what the application programmer
* should expect in the following, and for that reason I tell the
* units and origin of each measurement (where it applies), or else I
* use sufficiently weaselly language ("is a monotonically nondecreasing
* function of...") that I cannot set false expectations for lawyerly
* readers.
*/
#if defined(__KERNEL__) || defined(_KERNEL)
#ifndef DLT_IEEE802_11_RADIO
#define DLT_IEEE802_11_RADIO 127 /* 802.11 plus WLAN header */
#endif
#endif /* defined(__KERNEL__) || defined(_KERNEL) */
#define IEEE80211_RADIOTAP_HDRLEN 64 /* XXX deprecated */
/*
* The radio capture header precedes the 802.11 header.
*
* Note well: all radiotap fields are little-endian.
*/
struct ieee80211_radiotap_header {
uint8_t it_version; /* Version 0. Only increases
* for drastic changes,
* introduction of compatible
* new fields does not count.
*/
uint8_t it_pad;
uint16_t it_len; /* length of the whole
* header in bytes, including
* it_version, it_pad,
* it_len, and data fields.
*/
uint32_t it_present; /* A bitmap telling which
* fields are present. Set bit 31
* (0x80000000) to extend the
* bitmap by another 32 bits.
* Additional extensions are made
* by setting bit 31.
*/
} __packed;
/*
* Name Data type Units
* ---- --------- -----
*
* IEEE80211_RADIOTAP_TSFT uint64_t microseconds
*
* Value in microseconds of the MAC's 64-bit 802.11 Time
* Synchronization Function timer when the first bit of the
* MPDU arrived at the MAC. For received frames, only.
*
* IEEE80211_RADIOTAP_CHANNEL 2 x uint16_t MHz, bitmap
*
* Tx/Rx frequency in MHz, followed by flags (see below).
*
* IEEE80211_RADIOTAP_FHSS uint16_t see below
*
* For frequency-hopping radios, the hop set (first byte)
* and pattern (second byte).
*
* IEEE80211_RADIOTAP_RATE uint8_t 500kb/s or index
*
* Tx/Rx data rate. If bit 0x80 is set then it represents an
* an MCS index and not an IEEE rate.
*
* IEEE80211_RADIOTAP_DBM_ANTSIGNAL int8_t decibels from
* one milliwatt (dBm)
*
* RF signal power at the antenna, decibel difference from
* one milliwatt.
*
* IEEE80211_RADIOTAP_DBM_ANTNOISE int8_t decibels from
* one milliwatt (dBm)
*
* RF noise power at the antenna, decibel difference from one
* milliwatt.
*
* IEEE80211_RADIOTAP_DB_ANTSIGNAL uint8_t decibel (dB)
*
* RF signal power at the antenna, decibel difference from an
* arbitrary, fixed reference.
*
* IEEE80211_RADIOTAP_DB_ANTNOISE uint8_t decibel (dB)
*
* RF noise power at the antenna, decibel difference from an
* arbitrary, fixed reference point.
*
* IEEE80211_RADIOTAP_LOCK_QUALITY uint16_t unitless
*
* Quality of Barker code lock. Unitless. Monotonically
* nondecreasing with "better" lock strength. Called "Signal
* Quality" in datasheets. (Is there a standard way to measure
* this?)
*
* IEEE80211_RADIOTAP_TX_ATTENUATION uint16_t unitless
*
* Transmit power expressed as unitless distance from max
* power set at factory calibration. 0 is max power.
* Monotonically nondecreasing with lower power levels.
*
* IEEE80211_RADIOTAP_DB_TX_ATTENUATION uint16_t decibels (dB)
*
* Transmit power expressed as decibel distance from max power
* set at factory calibration. 0 is max power. Monotonically
* nondecreasing with lower power levels.
*
* IEEE80211_RADIOTAP_DBM_TX_POWER int8_t decibels from
* one milliwatt (dBm)
*
* Transmit power expressed as dBm (decibels from a 1 milliwatt
* reference). This is the absolute power level measured at
* the antenna port.
*
* IEEE80211_RADIOTAP_FLAGS uint8_t bitmap
*
* Properties of transmitted and received frames. See flags
* defined below.
*
* IEEE80211_RADIOTAP_ANTENNA uint8_t antenna index
*
* Unitless indication of the Rx/Tx antenna for this packet.
* The first antenna is antenna 0.
*
* IEEE80211_RADIOTAP_XCHANNEL uint32_t bitmap
* uint16_t MHz
* uint8_t channel number
* int8_t .5 dBm
*
* Extended channel specification: flags (see below) followed by
* frequency in MHz, the corresponding IEEE channel number, and
* finally the maximum regulatory transmit power cap in .5 dBm
* units. This property supersedes IEEE80211_RADIOTAP_CHANNEL
* and only one of the two should be present.
*/
enum ieee80211_radiotap_type {
IEEE80211_RADIOTAP_TSFT = 0,
IEEE80211_RADIOTAP_FLAGS = 1,
IEEE80211_RADIOTAP_RATE = 2,
IEEE80211_RADIOTAP_CHANNEL = 3,
IEEE80211_RADIOTAP_FHSS = 4,
IEEE80211_RADIOTAP_DBM_ANTSIGNAL = 5,
IEEE80211_RADIOTAP_DBM_ANTNOISE = 6,
IEEE80211_RADIOTAP_LOCK_QUALITY = 7,
IEEE80211_RADIOTAP_TX_ATTENUATION = 8,
IEEE80211_RADIOTAP_DB_TX_ATTENUATION = 9,
IEEE80211_RADIOTAP_DBM_TX_POWER = 10,
IEEE80211_RADIOTAP_ANTENNA = 11,
IEEE80211_RADIOTAP_DB_ANTSIGNAL = 12,
IEEE80211_RADIOTAP_DB_ANTNOISE = 13,
/* NB: gap for netbsd definitions */
IEEE80211_RADIOTAP_XCHANNEL = 18,
IEEE80211_RADIOTAP_EXT = 31,
};
#ifndef _KERNEL
/* channel attributes */
#define IEEE80211_CHAN_TURBO 0x00000010 /* Turbo channel */
#define IEEE80211_CHAN_CCK 0x00000020 /* CCK channel */
#define IEEE80211_CHAN_OFDM 0x00000040 /* OFDM channel */
#define IEEE80211_CHAN_2GHZ 0x00000080 /* 2 GHz spectrum channel. */
#define IEEE80211_CHAN_5GHZ 0x00000100 /* 5 GHz spectrum channel */
#define IEEE80211_CHAN_PASSIVE 0x00000200 /* Only passive scan allowed */
#define IEEE80211_CHAN_DYN 0x00000400 /* Dynamic CCK-OFDM channel */
#define IEEE80211_CHAN_GFSK 0x00000800 /* GFSK channel (FHSS PHY) */
#define IEEE80211_CHAN_GSM 0x00001000 /* 900 MHz spectrum channel */
#define IEEE80211_CHAN_STURBO 0x00002000 /* 11a static turbo channel only */
#define IEEE80211_CHAN_HALF 0x00004000 /* Half rate channel */
#define IEEE80211_CHAN_QUARTER 0x00008000 /* Quarter rate channel */
#endif /* !_KERNEL */
/* For IEEE80211_RADIOTAP_FLAGS */
#define IEEE80211_RADIOTAP_F_CFP 0x01 /* sent/received
* during CFP
*/
#define IEEE80211_RADIOTAP_F_SHORTPRE 0x02 /* sent/received
* with short
* preamble
*/
#define IEEE80211_RADIOTAP_F_WEP 0x04 /* sent/received
* with WEP encryption
*/
#define IEEE80211_RADIOTAP_F_FRAG 0x08 /* sent/received
* with fragmentation
*/
#define IEEE80211_RADIOTAP_F_FCS 0x10 /* frame includes FCS */
#define IEEE80211_RADIOTAP_F_DATAPAD 0x20 /* frame has padding between
* 802.11 header and payload
* (to 32-bit boundary)
*/
#define IEEE80211_RADIOTAP_F_BADFCS 0x40 /* does not pass FCS check */
#define IEEE80211_RADIOTAP_F_SHORTGI 0x80 /* HT short GI */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_RADIOTAP_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_regdomain.h
-282
View File
@@ -1,282 +0,0 @@
/*-
* Copyright (c) 2005-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_REGDOMAIN_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_REGDOMAIN_H_
/*
* 802.11 regulatory domain definitions.
*/
/*
* ISO 3166 Country/Region Codes
* http://ftp.ics.uci.edu/pub/ietf/http/related/iso3166.txt
*/
enum ISOCountryCode {
CTRY_AFGHANISTAN = 4,
CTRY_ALBANIA = 8, /* Albania */
CTRY_ALGERIA = 12, /* Algeria */
CTRY_AMERICAN_SAMOA = 16,
CTRY_ANDORRA = 20,
CTRY_ANGOLA = 24,
CTRY_ANGUILLA = 660,
CTRY_ANTARTICA = 10,
CTRY_ANTIGUA = 28, /* Antigua and Barbuda */
CTRY_ARGENTINA = 32, /* Argentina */
CTRY_ARMENIA = 51, /* Armenia */
CTRY_ARUBA = 533, /* Aruba */
CTRY_AUSTRALIA = 36, /* Australia */
CTRY_AUSTRIA = 40, /* Austria */
CTRY_AZERBAIJAN = 31, /* Azerbaijan */
CTRY_BAHAMAS = 44, /* Bahamas */
CTRY_BAHRAIN = 48, /* Bahrain */
CTRY_BANGLADESH = 50, /* Bangladesh */
CTRY_BARBADOS = 52,
CTRY_BELARUS = 112, /* Belarus */
CTRY_BELGIUM = 56, /* Belgium */
CTRY_BELIZE = 84,
CTRY_BENIN = 204,
CTRY_BERMUDA = 60,
CTRY_BHUTAN = 64,
CTRY_BOLIVIA = 68, /* Bolivia */
CTRY_BOSNIA_AND_HERZEGOWINA = 70,
CTRY_BOTSWANA = 72,
CTRY_BOUVET_ISLAND = 74,
CTRY_BRAZIL = 76, /* Brazil */
CTRY_BRITISH_INDIAN_OCEAN_TERRITORY = 86,
CTRY_BRUNEI_DARUSSALAM = 96, /* Brunei Darussalam */
CTRY_BULGARIA = 100, /* Bulgaria */
CTRY_BURKINA_FASO = 854,
CTRY_BURUNDI = 108,
CTRY_CAMBODIA = 116,
CTRY_CAMEROON = 120,
CTRY_CANADA = 124, /* Canada */
CTRY_CAPE_VERDE = 132,
CTRY_CAYMAN_ISLANDS = 136,
CTRY_CENTRAL_AFRICAN_REPUBLIC = 140,
CTRY_CHAD = 148,
CTRY_CHILE = 152, /* Chile */
CTRY_CHINA = 156, /* People's Republic of China */
CTRY_CHRISTMAS_ISLAND = 162,
CTRY_COCOS_ISLANDS = 166,
CTRY_COLOMBIA = 170, /* Colombia */
CTRY_COMOROS = 174,
CTRY_CONGO = 178,
CTRY_COOK_ISLANDS = 184,
CTRY_COSTA_RICA = 188, /* Costa Rica */
CTRY_COTE_DIVOIRE = 384,
CTRY_CROATIA = 191, /* Croatia (local name: Hrvatska) */
CTRY_CYPRUS = 196, /* Cyprus */
CTRY_CZECH = 203, /* Czech Republic */
CTRY_DENMARK = 208, /* Denmark */
CTRY_DJIBOUTI = 262,
CTRY_DOMINICA = 212,
CTRY_DOMINICAN_REPUBLIC = 214, /* Dominican Republic */
CTRY_EAST_TIMOR = 626,
CTRY_ECUADOR = 218, /* Ecuador */
CTRY_EGYPT = 818, /* Egypt */
CTRY_EL_SALVADOR = 222, /* El Salvador */
CTRY_EQUATORIAL_GUINEA = 226,
CTRY_ERITREA = 232,
CTRY_ESTONIA = 233, /* Estonia */
CTRY_ETHIOPIA = 210,
CTRY_FALKLAND_ISLANDS = 238, /* (Malvinas) */
CTRY_FAEROE_ISLANDS = 234, /* Faeroe Islands */
CTRY_FIJI = 242,
CTRY_FINLAND = 246, /* Finland */
CTRY_FRANCE = 250, /* France */
CTRY_FRANCE2 = 255, /* France (Metropolitan) */
CTRY_FRENCH_GUIANA = 254,
CTRY_FRENCH_POLYNESIA = 258,
CTRY_FRENCH_SOUTHERN_TERRITORIES = 260,
CTRY_GABON = 266,
CTRY_GAMBIA = 270,
CTRY_GEORGIA = 268, /* Georgia */
CTRY_GERMANY = 276, /* Germany */
CTRY_GHANA = 288,
CTRY_GIBRALTAR = 292,
CTRY_GREECE = 300, /* Greece */
CTRY_GREENLAND = 304,
CTRY_GRENADA = 308,
CTRY_GUADELOUPE = 312,
CTRY_GUAM = 316,
CTRY_GUATEMALA = 320, /* Guatemala */
CTRY_GUINEA = 324,
CTRY_GUINEA_BISSAU = 624,
CTRY_GUYANA = 328,
/* XXX correct remainder */
CTRY_HAITI = 332,
CTRY_HONDURAS = 340, /* Honduras */
CTRY_HONG_KONG = 344, /* Hong Kong S.A.R., P.R.C. */
CTRY_HUNGARY = 348, /* Hungary */
CTRY_ICELAND = 352, /* Iceland */
CTRY_INDIA = 356, /* India */
CTRY_INDONESIA = 360, /* Indonesia */
CTRY_IRAN = 364, /* Iran */
CTRY_IRAQ = 368, /* Iraq */
CTRY_IRELAND = 372, /* Ireland */
CTRY_ISRAEL = 376, /* Israel */
CTRY_ITALY = 380, /* Italy */
CTRY_JAMAICA = 388, /* Jamaica */
CTRY_JAPAN = 392, /* Japan */
CTRY_JORDAN = 400, /* Jordan */
CTRY_KAZAKHSTAN = 398, /* Kazakhstan */
CTRY_KENYA = 404, /* Kenya */
CTRY_KOREA_NORTH = 408, /* North Korea */
CTRY_KOREA_ROC = 410, /* South Korea */
CTRY_KOREA_ROC2 = 411, /* South Korea */
CTRY_KUWAIT = 414, /* Kuwait */
CTRY_LATVIA = 428, /* Latvia */
CTRY_LEBANON = 422, /* Lebanon */
CTRY_LIBYA = 434, /* Libya */
CTRY_LIECHTENSTEIN = 438, /* Liechtenstein */
CTRY_LITHUANIA = 440, /* Lithuania */
CTRY_LUXEMBOURG = 442, /* Luxembourg */
CTRY_MACAU = 446, /* Macau */
CTRY_MACEDONIA = 807, /* the Former Yugoslav Republic of Macedonia */
CTRY_MALAYSIA = 458, /* Malaysia */
CTRY_MALTA = 470, /* Malta */
CTRY_MEXICO = 484, /* Mexico */
CTRY_MONACO = 492, /* Principality of Monaco */
CTRY_MOROCCO = 504, /* Morocco */
CTRY_NEPAL = 524, /* Nepal */
CTRY_NETHERLANDS = 528, /* Netherlands */
CTRY_NEW_ZEALAND = 554, /* New Zealand */
CTRY_NICARAGUA = 558, /* Nicaragua */
CTRY_NORWAY = 578, /* Norway */
CTRY_OMAN = 512, /* Oman */
CTRY_PAKISTAN = 586, /* Islamic Republic of Pakistan */
CTRY_PANAMA = 591, /* Panama */
CTRY_PARAGUAY = 600, /* Paraguay */
CTRY_PERU = 604, /* Peru */
CTRY_PHILIPPINES = 608, /* Republic of the Philippines */
CTRY_POLAND = 616, /* Poland */
CTRY_PORTUGAL = 620, /* Portugal */
CTRY_PUERTO_RICO = 630, /* Puerto Rico */
CTRY_QATAR = 634, /* Qatar */
CTRY_ROMANIA = 642, /* Romania */
CTRY_RUSSIA = 643, /* Russia */
CTRY_SAUDI_ARABIA = 682, /* Saudi Arabia */
CTRY_SINGAPORE = 702, /* Singapore */
CTRY_SLOVAKIA = 703, /* Slovak Republic */
CTRY_SLOVENIA = 705, /* Slovenia */
CTRY_SOUTH_AFRICA = 710, /* South Africa */
CTRY_SPAIN = 724, /* Spain */
CTRY_SRILANKA = 144, /* Sri Lanka */
CTRY_SWEDEN = 752, /* Sweden */
CTRY_SWITZERLAND = 756, /* Switzerland */
CTRY_SYRIA = 760, /* Syria */
CTRY_TAIWAN = 158, /* Taiwan */
CTRY_THAILAND = 764, /* Thailand */
CTRY_TRINIDAD_Y_TOBAGO = 780, /* Trinidad y Tobago */
CTRY_TUNISIA = 788, /* Tunisia */
CTRY_TURKEY = 792, /* Turkey */
CTRY_UAE = 784, /* U.A.E. */
CTRY_UKRAINE = 804, /* Ukraine */
CTRY_UNITED_KINGDOM = 826, /* United Kingdom */
CTRY_UNITED_STATES = 840, /* United States */
CTRY_URUGUAY = 858, /* Uruguay */
CTRY_UZBEKISTAN = 860, /* Uzbekistan */
CTRY_VENEZUELA = 862, /* Venezuela */
CTRY_VIET_NAM = 704, /* Viet Nam */
CTRY_YEMEN = 887, /* Yemen */
CTRY_ZIMBABWE = 716, /* Zimbabwe */
/* NB: from here down not listed in 3166; they come from Atheros */
CTRY_DEBUG = 0x1ff, /* debug */
CTRY_DEFAULT = 0, /* default */
CTRY_UNITED_STATES_FCC49 = 842, /* United States (Public Safety)*/
CTRY_KOREA_ROC3 = 412, /* South Korea */
CTRY_JAPAN1 = 393, /* Japan (JP1) */
CTRY_JAPAN2 = 394, /* Japan (JP0) */
CTRY_JAPAN3 = 395, /* Japan (JP1-1) */
CTRY_JAPAN4 = 396, /* Japan (JE1) */
CTRY_JAPAN5 = 397, /* Japan (JE2) */
CTRY_JAPAN6 = 399, /* Japan (JP6) */
CTRY_JAPAN7 = 4007, /* Japan (J7) */
CTRY_JAPAN8 = 4008, /* Japan (J8) */
CTRY_JAPAN9 = 4009, /* Japan (J9) */
CTRY_JAPAN10 = 4010, /* Japan (J10) */
CTRY_JAPAN11 = 4011, /* Japan (J11) */
CTRY_JAPAN12 = 4012, /* Japan (J12) */
CTRY_JAPAN13 = 4013, /* Japan (J13) */
CTRY_JAPAN14 = 4014, /* Japan (J14) */
CTRY_JAPAN15 = 4015, /* Japan (J15) */
CTRY_JAPAN16 = 4016, /* Japan (J16) */
CTRY_JAPAN17 = 4017, /* Japan (J17) */
CTRY_JAPAN18 = 4018, /* Japan (J18) */
CTRY_JAPAN19 = 4019, /* Japan (J19) */
CTRY_JAPAN20 = 4020, /* Japan (J20) */
CTRY_JAPAN21 = 4021, /* Japan (J21) */
CTRY_JAPAN22 = 4022, /* Japan (J22) */
CTRY_JAPAN23 = 4023, /* Japan (J23) */
CTRY_JAPAN24 = 4024, /* Japan (J24) */
};
enum RegdomainCode {
SKU_FCC = 0x10, /* FCC, aka United States */
SKU_CA = 0x20, /* North America, aka Canada */
SKU_ETSI = 0x30, /* Europe */
SKU_ETSI2 = 0x32, /* Europe w/o HT40 in 5GHz */
SKU_ETSI3 = 0x33, /* Europe - channel 36 */
SKU_FCC3 = 0x3a, /* FCC w/5470 band, 11h, DFS */
SKU_JAPAN = 0x40,
SKU_KOREA = 0x45,
SKU_APAC = 0x50, /* Asia Pacific */
SKU_APAC2 = 0x51, /* Asia Pacific w/ DFS on mid-band */
SKU_APAC3 = 0x5d, /* Asia Pacific w/o ISM band */
SKU_ROW = 0x81, /* China/Taiwan/Rest of World */
SKU_NONE = 0xf0, /* "Region Free" */
SKU_DEBUG = 0x1ff,
/* NB: from here down private */
SKU_SR9 = 0x0298, /* Ubiquiti SR9 (900MHz/GSM) */
SKU_XR9 = 0x0299, /* Ubiquiti XR9 (900MHz/GSM) */
SKU_GZ901 = 0x029a, /* Zcomax GZ-901 (900MHz/GSM) */
};
#if defined(__KERNEL__) || defined(_KERNEL)
struct ieee80211com;
void ieee80211_regdomain_attach(struct ieee80211com *);
void ieee80211_regdomain_detach(struct ieee80211com *);
struct ieee80211vap;
void ieee80211_regdomain_vattach(struct ieee80211vap *);
void ieee80211_regdomain_vdetach(struct ieee80211vap *);
struct ieee80211_regdomain;
int ieee80211_init_channels(struct ieee80211com *,
const struct ieee80211_regdomain *, const uint8_t bands[]);
struct ieee80211_channel;
void ieee80211_sort_channels(struct ieee80211_channel *chans, int nchans);
struct ieee80211_appie;
struct ieee80211_appie *ieee80211_alloc_countryie(struct ieee80211com *);
struct ieee80211_regdomain_req;
int ieee80211_setregdomain(struct ieee80211vap *,
struct ieee80211_regdomain_req *);
#endif /* defined(__KERNEL__) || defined(_KERNEL) */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_REGDOMAIN_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_rssadapt.h
-101
View File
@@ -1,101 +0,0 @@
/* $FreeBSD$ */
/* $NetBSD: ieee80211_rssadapt.h,v 1.4 2005/02/26 22:45:09 perry Exp $ */
/*-
* Copyright (c) 2003, 2004 David Young. All rights reserved.
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* 3. The name of David Young may not be used to endorse or promote
* products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY David Young ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL David
* Young BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
* OF SUCH DAMAGE.
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_RSSADAPT_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_RSSADAPT_H_
/* Data-rate adaptation loosely based on "Link Adaptation Strategy
* for IEEE 802.11 WLAN via Received Signal Strength Measurement"
* by Javier del Prado Pavon and Sunghyun Choi.
*/
/* Buckets for frames 0-128 bytes long, 129-1024, 1025-maximum. */
#define IEEE80211_RSSADAPT_BKTS 3
#define IEEE80211_RSSADAPT_BKT0 128
#define IEEE80211_RSSADAPT_BKTPOWER 3 /* 2**_BKTPOWER */
struct ieee80211_rssadapt {
struct ieee80211vap *vap;
int interval; /* update interval (ticks) */
};
struct ieee80211_rssadapt_node {
struct ieee80211_rssadapt *ra_rs; /* backpointer */
struct ieee80211_rateset ra_rates; /* negotiated rates */
int ra_rix; /* current rate index */
int ra_ticks; /* time of last update */
int ra_last_raise; /* time of last rate raise */
int ra_raise_interval; /* rate raise time threshold */
/* Tx failures in this update interval */
uint32_t ra_nfail;
/* Tx successes in this update interval */
uint32_t ra_nok;
/* exponential average packets/second */
uint32_t ra_pktrate;
/* RSSI threshold for each Tx rate */
uint16_t ra_rate_thresh[IEEE80211_RSSADAPT_BKTS]
[IEEE80211_RATE_SIZE];
};
void ieee80211_rssadapt_init(struct ieee80211_rssadapt *,
struct ieee80211vap *, int);
void ieee80211_rssadapt_cleanup(struct ieee80211_rssadapt *);
void ieee80211_rssadapt_setinterval(struct ieee80211_rssadapt *, int);
void ieee80211_rssadapt_node_init(struct ieee80211_rssadapt *,
struct ieee80211_rssadapt_node *, struct ieee80211_node *);
int ieee80211_rssadapt_choose(struct ieee80211_node *,
struct ieee80211_rssadapt_node *, u_int);
/* NB: these are public only for the inline below */
void ieee80211_rssadapt_raise_rate(struct ieee80211_rssadapt_node *,
int pktlen, int rssi);
void ieee80211_rssadapt_lower_rate(struct ieee80211_rssadapt_node *,
int pktlen, int rssi);
#define IEEE80211_RSSADAPT_SUCCESS 1
#define IEEE80211_RSSADAPT_FAILURE 0
static __inline void
ieee80211_rssadapt_tx_complete(struct ieee80211_rssadapt_node *ra,
int success, int pktlen, int rssi)
{
if (success) {
ra->ra_nok++;
if ((ra->ra_rix + 1) < ra->ra_rates.rs_nrates &&
(ticks - ra->ra_last_raise) >= ra->ra_raise_interval)
ieee80211_rssadapt_raise_rate(ra, pktlen, rssi);
} else {
ra->ra_nfail++;
ieee80211_rssadapt_lower_rate(ra, pktlen, rssi);
}
}
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_RSSADAPT_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_scan.h
-301
View File
@@ -1,301 +0,0 @@
/*-
* Copyright (c) 2005-2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_SCAN_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_SCAN_H_
/*
* 802.11 scanning support.
*
* Scanning is the procedure by which a station locates a bss to join
* (infrastructure/ibss mode), or a channel to use (when operating as
* an ap or ibss master). Scans are either "active" or "passive". An
* active scan causes one or more probe request frames to be sent on
* visiting each channel. A passive request causes each channel in the
* scan set to be visited but no frames to be transmitted; the station
* only listens for traffic. Note that active scanning may still need
* to listen for traffic before sending probe request frames depending
* on regulatory constraints; the 802.11 layer handles this by generating
* a callback when scanning on a ``passive channel'' when the
* IEEE80211_FEXT_PROBECHAN flag is set.
*
* A scan operation involves constructing a set of channels to inspect
* (the scan set), visiting each channel and collecting information
* (e.g. what bss are present), and then analyzing the results to make
* decisions like which bss to join. This process needs to be as fast
* as possible so we do things like intelligently construct scan sets
* and dwell on a channel only as long as necessary. The scan code also
* maintains a cache of recent scan results and uses it to bypass scanning
* whenever possible. The scan cache is also used to enable roaming
* between access points when operating in infrastructure mode.
*
* Scanning is handled with pluggable modules that implement "policy"
* per-operating mode. The core scanning support provides an
* instrastructure to support these modules and exports a common api
* to the rest of the 802.11 layer. Policy modules decide what
* channels to visit, what state to record to make decisions (e.g. ap
* mode scanning for auto channel selection keeps significantly less
* state than sta mode scanning for an ap to associate to), and selects
* the final station/channel to return as the result of a scan.
*
* Scanning is done synchronously when initially bringing a vap to an
* operational state and optionally in the background to maintain the
* scan cache for doing roaming and rogue ap monitoring. Scanning is
* not tied to the 802.11 state machine that governs vaps though there
* is linkage to the IEEE80211_SCAN state. Only one vap at a time may
* be scanning; this scheduling policy is handled in ieee80211_new_state
* and is invisible to the scanning code.
*/
#define IEEE80211_SCAN_MAX IEEE80211_CHAN_MAX
struct ieee80211_scanner; /* scan policy state */
struct ieee80211_scan_ssid {
int len; /* length in bytes */
uint8_t ssid[IEEE80211_NWID_LEN]; /* ssid contents */
};
#define IEEE80211_SCAN_MAX_SSID 1 /* max # ssid's to probe */
/*
* Scan state visible to the 802.11 layer. Scan parameters and
* results are stored in this data structure. The ieee80211_scan_state
* structure is extended with space that is maintained private to
* the core scanning support. We allocate one instance and link it
* to the ieee80211com structure; then share it between all associated
* vaps. We could allocate multiple of these, e.g. to hold multiple
* scan results, but this is sufficient for current needs.
*/
struct ieee80211_scan_state {
struct ieee80211vap *ss_vap;
struct ieee80211com *ss_ic;
const struct ieee80211_scanner *ss_ops; /* policy hookup, see below */
void *ss_priv; /* scanner private state */
uint16_t ss_flags;
#define IEEE80211_SCAN_NOPICK 0x0001 /* scan only, no selection */
#define IEEE80211_SCAN_ACTIVE 0x0002 /* active scan (probe req) */
#define IEEE80211_SCAN_PICK1ST 0x0004 /* ``hey sailor'' mode */
#define IEEE80211_SCAN_BGSCAN 0x0008 /* bg scan, exit ps at end */
#define IEEE80211_SCAN_ONCE 0x0010 /* do one complete pass */
#define IEEE80211_SCAN_NOBCAST 0x0020 /* no broadcast probe req */
#define IEEE80211_SCAN_NOJOIN 0x0040 /* no auto-sequencing */
#define IEEE80211_SCAN_GOTPICK 0x1000 /* got candidate, can stop */
uint8_t ss_nssid; /* # ssid's to probe/match */
struct ieee80211_scan_ssid ss_ssid[IEEE80211_SCAN_MAX_SSID];
/* ssid's to probe/match */
/* ordered channel set */
struct ieee80211_channel *ss_chans[IEEE80211_SCAN_MAX];
uint16_t ss_next; /* ix of next chan to scan */
uint16_t ss_last; /* ix+1 of last chan to scan */
unsigned long ss_mindwell; /* min dwell on channel */
unsigned long ss_maxdwell; /* max dwell on channel */
};
/*
* The upper 16 bits of the flags word is used to communicate
* information to the scanning code that is NOT recorded in
* ss_flags. It might be better to split this stuff out into
* a separate variable to avoid confusion.
*/
#define IEEE80211_SCAN_FLUSH 0x00010000 /* flush candidate table */
#define IEEE80211_SCAN_NOSSID 0x80000000 /* don't update ssid list */
struct ieee80211com;
void ieee80211_scan_sta_init(void);
void ieee80211_scan_attach(struct ieee80211com *);
void ieee80211_scan_detach(struct ieee80211com *);
void ieee80211_scan_vattach(struct ieee80211vap *);
void ieee80211_scan_vdetach(struct ieee80211vap *);
void ieee80211_scan_dump_channels(const struct ieee80211_scan_state *);
#define IEEE80211_SCAN_FOREVER 0x7fffffff
int ieee80211_start_scan(struct ieee80211vap *, int flags,
u_int duration, u_int mindwell, u_int maxdwell,
u_int nssid, const struct ieee80211_scan_ssid ssids[]);
int ieee80211_check_scan(struct ieee80211vap *, int flags,
u_int duration, u_int mindwell, u_int maxdwell,
u_int nssid, const struct ieee80211_scan_ssid ssids[]);
int ieee80211_check_scan_current(struct ieee80211vap *);
int ieee80211_bg_scan(struct ieee80211vap *, int);
void ieee80211_cancel_scan(struct ieee80211vap *);
void ieee80211_cancel_anyscan(struct ieee80211vap *);
void ieee80211_scan_next(struct ieee80211vap *);
void ieee80211_scan_done(struct ieee80211vap *);
void ieee80211_probe_curchan(struct ieee80211vap *, int);
struct ieee80211_channel *ieee80211_scan_pickchannel(struct ieee80211com *, int);
struct ieee80211_scanparams;
void ieee80211_add_scan(struct ieee80211vap *,
const struct ieee80211_scanparams *,
const struct ieee80211_frame *,
int subtype, int rssi, int noise);
void ieee80211_scan_timeout(struct ieee80211com *);
void ieee80211_scan_assoc_success(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
enum {
IEEE80211_SCAN_FAIL_TIMEOUT = 1, /* no response to mgmt frame */
IEEE80211_SCAN_FAIL_STATUS = 2 /* negative response to " " */
};
void ieee80211_scan_assoc_fail(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN], int reason);
void ieee80211_scan_flush(struct ieee80211vap *);
struct ieee80211_scan_entry;
typedef void ieee80211_scan_iter_func(void *,
const struct ieee80211_scan_entry *);
void ieee80211_scan_iterate(struct ieee80211vap *,
ieee80211_scan_iter_func, void *);
enum {
IEEE80211_BPARSE_BADIELEN = 0x01, /* ie len past end of frame */
IEEE80211_BPARSE_RATES_INVALID = 0x02, /* invalid RATES ie */
IEEE80211_BPARSE_XRATES_INVALID = 0x04, /* invalid XRATES ie */
IEEE80211_BPARSE_SSID_INVALID = 0x08, /* invalid SSID ie */
IEEE80211_BPARSE_CHAN_INVALID = 0x10, /* invalid FH/DSPARMS chan */
IEEE80211_BPARSE_OFFCHAN = 0x20, /* DSPARMS chan != curchan */
IEEE80211_BPARSE_BINTVAL_INVALID= 0x40, /* invalid beacon interval */
IEEE80211_BPARSE_CSA_INVALID = 0x80, /* invalid CSA ie */
};
/*
* Parameters supplied when adding/updating an entry in a
* scan cache. Pointer variables should be set to NULL
* if no data is available. Pointer references can be to
* local data; any information that is saved will be copied.
* All multi-byte values must be in host byte order.
*/
struct ieee80211_scanparams {
uint8_t status; /* bitmask of IEEE80211_BPARSE_* */
uint8_t chan; /* channel # from FH/DSPARMS */
uint8_t bchan; /* curchan's channel # */
uint8_t fhindex;
uint16_t fhdwell; /* FHSS dwell interval */
uint16_t capinfo; /* 802.11 capabilities */
uint16_t erp; /* NB: 0x100 indicates ie present */
uint16_t bintval;
uint8_t timoff;
uint8_t *ies; /* all captured ies */
size_t ies_len; /* length of all captured ies */
uint8_t *tim;
uint8_t *tstamp;
uint8_t *country;
uint8_t *ssid;
uint8_t *rates;
uint8_t *xrates;
uint8_t *doth;
uint8_t *wpa;
uint8_t *rsn;
uint8_t *wme;
uint8_t *htcap;
uint8_t *htinfo;
uint8_t *ath;
uint8_t *tdma;
uint8_t *csa;
uint8_t *meshid;
uint8_t *meshconf;
uint8_t *spare[3];
};
/*
* Scan cache entry format used when exporting data from a policy
* module; this data may be represented some other way internally.
*/
struct ieee80211_scan_entry {
uint8_t se_macaddr[IEEE80211_ADDR_LEN];
uint8_t se_bssid[IEEE80211_ADDR_LEN];
/* XXX can point inside se_ies */
uint8_t se_ssid[2+IEEE80211_NWID_LEN];
uint8_t se_rates[2+IEEE80211_RATE_MAXSIZE];
uint8_t se_xrates[2+IEEE80211_RATE_MAXSIZE];
union {
uint8_t data[8];
u_int64_t tsf;
} se_tstamp; /* from last rcv'd beacon */
uint16_t se_intval; /* beacon interval (host byte order) */
uint16_t se_capinfo; /* capabilities (host byte order) */
struct ieee80211_channel *se_chan;/* channel where sta found */
uint16_t se_timoff; /* byte offset to TIM ie */
uint16_t se_fhdwell; /* FH only (host byte order) */
uint8_t se_fhindex; /* FH only */
uint8_t se_dtimperiod; /* DTIM period */
uint16_t se_erp; /* ERP from beacon/probe resp */
int8_t se_rssi; /* avg'd recv ssi */
int8_t se_noise; /* noise floor */
uint8_t se_cc[2]; /* captured country code */
uint8_t se_meshid[2+IEEE80211_MESHID_LEN];
struct ieee80211_ies se_ies; /* captured ie's */
u_int se_age; /* age of entry (0 on create) */
};
/*
* Template for an in-kernel scan policy module.
* Modules register with the scanning code and are
* typically loaded as needed.
*/
struct ieee80211_scanner {
const char *scan_name; /* printable name */
int (*scan_attach)(struct ieee80211_scan_state *);
int (*scan_detach)(struct ieee80211_scan_state *);
int (*scan_start)(struct ieee80211_scan_state *,
struct ieee80211vap *);
int (*scan_restart)(struct ieee80211_scan_state *,
struct ieee80211vap *);
int (*scan_cancel)(struct ieee80211_scan_state *,
struct ieee80211vap *);
int (*scan_end)(struct ieee80211_scan_state *,
struct ieee80211vap *);
int (*scan_flush)(struct ieee80211_scan_state *);
struct ieee80211_channel *(*scan_pickchan)(
struct ieee80211_scan_state *, int);
/* add an entry to the cache */
int (*scan_add)(struct ieee80211_scan_state *,
const struct ieee80211_scanparams *,
const struct ieee80211_frame *,
int subtype, int rssi, int noise);
/* age and/or purge entries in the cache */
void (*scan_age)(struct ieee80211_scan_state *);
/* note that association failed for an entry */
void (*scan_assoc_fail)(struct ieee80211_scan_state *,
const uint8_t macaddr[IEEE80211_ADDR_LEN],
int reason);
/* note that association succeed for an entry */
void (*scan_assoc_success)(struct ieee80211_scan_state *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
/* iterate over entries in the scan cache */
void (*scan_iterate)(struct ieee80211_scan_state *,
ieee80211_scan_iter_func *, void *);
void (*scan_spare0)(void);
void (*scan_spare1)(void);
void (*scan_spare2)(void);
void (*scan_spare4)(void);
};
void ieee80211_scanner_register(enum ieee80211_opmode,
const struct ieee80211_scanner *);
void ieee80211_scanner_unregister(enum ieee80211_opmode,
const struct ieee80211_scanner *);
void ieee80211_scanner_unregister_all(const struct ieee80211_scanner *);
const struct ieee80211_scanner *ieee80211_scanner_get(enum ieee80211_opmode);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_SCAN_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_sta.h
-36
View File
@@ -1,36 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_STA_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_STA_H_
/*
* Station-mode implementation definitions.
*/
void ieee80211_sta_attach(struct ieee80211com *);
void ieee80211_sta_detach(struct ieee80211com *);
void ieee80211_sta_vattach(struct ieee80211vap *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_STA_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_superg.h
-129
View File
@@ -1,129 +0,0 @@
/*-
* Copyright (c) 2009 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_SUPERG_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_SUPERG_H_
/*
* Atheros' 802.11 SuperG protocol support.
*/
/*
* Atheros advanced capability information element.
*/
struct ieee80211_ath_ie {
uint8_t ath_id; /* IEEE80211_ELEMID_VENDOR */
uint8_t ath_len; /* length in bytes */
uint8_t ath_oui[3]; /* ATH_OUI */
uint8_t ath_oui_type; /* ATH_OUI_TYPE */
uint8_t ath_oui_subtype; /* ATH_OUI_SUBTYPE */
uint8_t ath_version; /* spec revision */
uint8_t ath_capability; /* capability info */
#define ATHEROS_CAP_TURBO_PRIME 0x01 /* dynamic turbo--aka Turbo' */
#define ATHEROS_CAP_COMPRESSION 0x02 /* data compression */
#define ATHEROS_CAP_FAST_FRAME 0x04 /* fast (jumbo) frames */
#define ATHEROS_CAP_XR 0x08 /* Xtended Range support */
#define ATHEROS_CAP_AR 0x10 /* Advanded Radar support */
#define ATHEROS_CAP_BURST 0x20 /* Bursting - not negotiated */
#define ATHEROS_CAP_WME 0x40 /* CWMin tuning */
#define ATHEROS_CAP_BOOST 0x80 /* use turbo/!turbo mode */
uint8_t ath_defkeyix[2];
} __packed;
#define ATH_OUI_VERSION 0x00
#define ATH_OUI_SUBTYPE 0x01
#ifdef _KERNEL
struct ieee80211_stageq {
struct mbuf *head; /* frames linked w/ m_nextpkt */
struct mbuf *tail; /* last frame in queue */
int depth; /* # items on head */
};
struct ieee80211_superg {
/* fast-frames staging q */
struct ieee80211_stageq ff_stageq[WME_NUM_AC];
int ff_stageqdepth; /* cumulative depth */
};
void ieee80211_superg_attach(struct ieee80211com *);
void ieee80211_superg_detach(struct ieee80211com *);
void ieee80211_superg_vattach(struct ieee80211vap *);
void ieee80211_superg_vdetach(struct ieee80211vap *);
uint8_t *ieee80211_add_ath(uint8_t *, uint8_t, ieee80211_keyix);
uint8_t *ieee80211_add_athcaps(uint8_t *, const struct ieee80211_node *);
void ieee80211_parse_ath(struct ieee80211_node *, uint8_t *);
int ieee80211_parse_athparams(struct ieee80211_node *, uint8_t *,
const struct ieee80211_frame *);
void ieee80211_ff_node_init(struct ieee80211_node *);
void ieee80211_ff_node_cleanup(struct ieee80211_node *);
struct mbuf *ieee80211_ff_check(struct ieee80211_node *, struct mbuf *);
void ieee80211_ff_age(struct ieee80211com *, struct ieee80211_stageq *,
int quanta);
static __inline void
ieee80211_ff_flush(struct ieee80211com *ic, int ac)
{
struct ieee80211_superg *sg = ic->ic_superg;
if (sg != NULL && sg->ff_stageq[ac].depth)
ieee80211_ff_age(ic, &sg->ff_stageq[ac], 0x7fffffff);
}
static __inline void
ieee80211_ff_age_all(struct ieee80211com *ic, int quanta)
{
struct ieee80211_superg *sg = ic->ic_superg;
if (sg != NULL && sg->ff_stageqdepth) {
if (sg->ff_stageq[WME_AC_VO].depth)
ieee80211_ff_age(ic, &sg->ff_stageq[WME_AC_VO], quanta);
if (sg->ff_stageq[WME_AC_VI].depth)
ieee80211_ff_age(ic, &sg->ff_stageq[WME_AC_VI], quanta);
if (sg->ff_stageq[WME_AC_BE].depth)
ieee80211_ff_age(ic, &sg->ff_stageq[WME_AC_BE], quanta);
if (sg->ff_stageq[WME_AC_BK].depth)
ieee80211_ff_age(ic, &sg->ff_stageq[WME_AC_BK], quanta);
}
}
struct mbuf *ieee80211_ff_encap(struct ieee80211vap *, struct mbuf *,
int, struct ieee80211_key *);
struct mbuf *ieee80211_ff_decap(struct ieee80211_node *, struct mbuf *);
static __inline struct mbuf *
ieee80211_decap_fastframe(struct ieee80211vap *vap, struct ieee80211_node *ni,
struct mbuf *m)
{
return IEEE80211_ATH_CAP(vap, ni, IEEE80211_NODE_FF) ?
ieee80211_ff_decap(ni, m) : m;
}
#endif /* _KERNEL */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_SUPERG_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_tdma.h
-102
View File
@@ -1,102 +0,0 @@
/*-
* Copyright (c) 2007-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2007-2009 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_TDMA_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_TDMA_H_
/*
* TDMA-mode implementation definitions.
*/
#define TDMA_SUBTYPE_PARAM 0x01
#define TDMA_VERSION_V2 2
#define TDMA_VERSION TDMA_VERSION_V2
/* NB: we only support 2 right now but protocol handles up to 8 */
#define TDMA_MAXSLOTS 2 /* max slots/sta's */
#define TDMA_PARAM_LEN_V2 sizeof(struct ieee80211_tdma_param)
/*
* TDMA information element.
*/
struct ieee80211_tdma_param {
u_int8_t tdma_id; /* IEEE80211_ELEMID_VENDOR */
u_int8_t tdma_len;
u_int8_t tdma_oui[3]; /* TDMA_OUI */
u_int8_t tdma_type; /* TDMA_OUI_TYPE */
u_int8_t tdma_subtype; /* TDMA_SUBTYPE_PARAM */
u_int8_t tdma_version; /* spec revision */
u_int8_t tdma_slot; /* station slot # [0..7] */
u_int8_t tdma_slotcnt; /* bss slot count [1..8] */
u_int16_t tdma_slotlen; /* bss slot len (100us) */
u_int8_t tdma_bintval; /* beacon interval (superframes) */
u_int8_t tdma_inuse[1]; /* slot occupancy map */
u_int8_t tdma_pad[2];
u_int8_t tdma_tstamp[8]; /* timestamp from last beacon */
} __packed;
#ifdef _KERNEL
/*
* Implementation state.
*/
struct ieee80211_tdma_state {
u_int tdma_slotlen; /* bss slot length (us) */
uint8_t tdma_version; /* protocol version to use */
uint8_t tdma_slotcnt; /* bss slot count */
uint8_t tdma_bintval; /* beacon interval (slots) */
uint8_t tdma_slot; /* station slot # */
uint8_t tdma_inuse[1]; /* mask of slots in use */
uint8_t tdma_active[1]; /* mask of active slots */
int tdma_count; /* active/inuse countdown */
void *tdma_peer; /* peer station cookie */
struct timeval tdma_lastprint; /* time of last rate-limited printf */
int tdma_fails; /* fail count for rate-limiting */
/* parent method pointers */
int (*tdma_newstate)(struct ieee80211vap *, enum ieee80211_state,
int arg);
void (*tdma_recv_mgmt)(struct ieee80211_node *,
struct mbuf *, int, int, int);
void (*tdma_opdetach)(struct ieee80211vap *);
};
#define TDMA_UPDATE_SLOT 0x0001 /* tdma_slot changed */
#define TDMA_UPDATE_SLOTCNT 0x0002 /* tdma_slotcnt changed */
#define TDMA_UPDATE_SLOTLEN 0x0004 /* tdma_slotlen changed */
#define TDMA_UPDATE_BINTVAL 0x0008 /* tdma_bintval changed */
void ieee80211_tdma_vattach(struct ieee80211vap *);
int ieee80211_tdma_getslot(struct ieee80211vap *vap);
void ieee80211_parse_tdma(struct ieee80211_node *ni, const uint8_t *ie);
uint8_t *ieee80211_add_tdma(uint8_t *frm, struct ieee80211vap *vap);
struct ieee80211_beacon_offsets;
void ieee80211_tdma_update_beacon(struct ieee80211vap *vap,
struct ieee80211_beacon_offsets *bo);
#endif /* _KERNEL */
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_TDMA_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_var.h
-914
View File
@@ -1,914 +0,0 @@
/*-
* Copyright (c) 2001 Atsushi Onoe
* Copyright (c) 2002-2009 Sam Leffler, Errno Consulting
* Copyright (c) 2009 Colin Günther, [email protected]
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_VAR_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_VAR_H_
/*
* Definitions for IEEE 802.11 drivers.
*/
/* NB: portability glue must go first */
#ifdef __NetBSD__
#include <net80211/ieee80211_netbsd.h>
#elif __FreeBSD__
#include <net80211/ieee80211_freebsd.h>
#elif __linux__
#include <net80211/ieee80211_linux.h>
#elif __HAIKU__
#include <net80211/ieee80211_haiku.h>
#else
#error "No support for your operating system!"
#endif
#include <net80211/_ieee80211.h>
#include <net80211/ieee80211.h>
#include <net80211/ieee80211_ageq.h>
#include <net80211/ieee80211_crypto.h>
#include <net80211/ieee80211_dfs.h>
#include <net80211/ieee80211_ioctl.h> /* for ieee80211_stats */
#include <net80211/ieee80211_phy.h>
#include <net80211/ieee80211_power.h>
#include <net80211/ieee80211_node.h>
#include <net80211/ieee80211_proto.h>
#include <net80211/ieee80211_radiotap.h>
#include <net80211/ieee80211_scan.h>
#define IEEE80211_TXPOWER_MAX 100 /* .5 dbM (XXX units?) */
#define IEEE80211_TXPOWER_MIN 0 /* kill radio */
#define IEEE80211_DTIM_DEFAULT 1 /* default DTIM period */
#define IEEE80211_BINTVAL_DEFAULT 100 /* default beacon interval (TU's) */
#define IEEE80211_BMISS_MAX 2 /* maximum consecutive bmiss allowed */
#define IEEE80211_HWBMISS_DEFAULT 7 /* h/w bmiss threshold (beacons) */
#define IEEE80211_BGSCAN_INTVAL_MIN 15 /* min bg scan intvl (secs) */
#define IEEE80211_BGSCAN_INTVAL_DEFAULT (5*60) /* default bg scan intvl */
#define IEEE80211_BGSCAN_IDLE_MIN 100 /* min idle time (ms) */
#define IEEE80211_BGSCAN_IDLE_DEFAULT 250 /* default idle time (ms) */
#define IEEE80211_SCAN_VALID_MIN 10 /* min scan valid time (secs) */
#define IEEE80211_SCAN_VALID_DEFAULT 60 /* default scan valid time */
#define IEEE80211_PS_SLEEP 0x1 /* STA is in power saving mode */
#define IEEE80211_PS_MAX_QUEUE 50 /* maximum saved packets */
#define IEEE80211_FIXED_RATE_NONE 0xff
#define IEEE80211_TXMAX_DEFAULT 6 /* default ucast max retries */
#define IEEE80211_RTS_DEFAULT IEEE80211_RTS_MAX
#define IEEE80211_FRAG_DEFAULT IEEE80211_FRAG_MAX
#define IEEE80211_MS_TO_TU(x) (((x) * 1000) / 1024)
#define IEEE80211_TU_TO_MS(x) (((x) * 1024) / 1000)
#define IEEE80211_TU_TO_TICKS(x)(((x) * 1024 * hz) / (1000 * 1000))
/*
* 802.11 control state is split into a common portion that maps
* 1-1 to a physical device and one or more "Virtual AP's" (VAP)
* that are bound to an ieee80211com instance and share a single
* underlying device. Each VAP has a corresponding OS device
* entity through which traffic flows and that applications use
* for issuing ioctls, etc.
*/
/*
* Data common to one or more virtual AP's. State shared by
* the underlying device and the net80211 layer is exposed here;
* e.g. device-specific callbacks.
*/
struct ieee80211vap;
typedef void (*ieee80211vap_attach)(struct ieee80211vap *);
struct ieee80211_appie {
uint16_t ie_len; /* size of ie_data */
uint8_t ie_data[0]; /* user-specified IE's */
};
struct ieee80211_tdma_param;
struct ieee80211_rate_table;
struct ieee80211_tx_ampdu;
struct ieee80211_rx_ampdu;
struct ieee80211_superg;
struct ieee80211_frame;
struct ieee80211com {
struct ifnet *ic_ifp; /* associated device */
ieee80211_com_lock_t ic_comlock; /* state update lock */
TAILQ_HEAD(, ieee80211vap) ic_vaps; /* list of vap instances */
int ic_headroom; /* driver tx headroom needs */
enum ieee80211_phytype ic_phytype; /* XXX wrong for multi-mode */
enum ieee80211_opmode ic_opmode; /* operation mode */
struct ifmedia ic_media; /* interface media config */
struct callout ic_inact; /* inactivity processing */
struct taskqueue *ic_tq; /* deferred state thread */
struct task ic_parent_task; /* deferred parent processing */
struct task ic_promisc_task;/* deferred promisc update */
struct task ic_mcast_task; /* deferred mcast update */
struct task ic_chan_task; /* deferred channel change */
struct task ic_bmiss_task; /* deferred beacon miss hndlr */
uint32_t ic_flags; /* state flags */
uint32_t ic_flags_ext; /* extended state flags */
uint32_t ic_flags_ht; /* HT state flags */
uint32_t ic_flags_ven; /* vendor state flags */
uint32_t ic_caps; /* capabilities */
uint32_t ic_htcaps; /* HT capabilities */
uint32_t ic_cryptocaps; /* crypto capabilities */
uint8_t ic_modecaps[2]; /* set of mode capabilities */
uint8_t ic_promisc; /* vap's needing promisc mode */
uint8_t ic_allmulti; /* vap's needing all multicast*/
uint8_t ic_nrunning; /* vap's marked running */
uint8_t ic_curmode; /* current mode */
uint16_t ic_bintval; /* beacon interval */
uint16_t ic_lintval; /* listen interval */
uint16_t ic_holdover; /* PM hold over duration */
uint16_t ic_txpowlimit; /* global tx power limit */
struct ieee80211_rateset ic_sup_rates[IEEE80211_MODE_MAX];
/*
* Channel state:
*
* ic_channels is the set of available channels for the device;
* it is setup by the driver
* ic_nchans is the number of valid entries in ic_channels
* ic_chan_avail is a bit vector of these channels used to check
* whether a channel is available w/o searching the channel table.
* ic_chan_active is a (potentially) constrained subset of
* ic_chan_avail that reflects any mode setting or user-specified
* limit on the set of channels to use/scan
* ic_curchan is the current channel the device is set to; it may
* be different from ic_bsschan when we are off-channel scanning
* or otherwise doing background work
* ic_bsschan is the channel selected for operation; it may
* be undefined (IEEE80211_CHAN_ANYC)
* ic_prevchan is a cached ``previous channel'' used to optimize
* lookups when switching back+forth between two channels
* (e.g. for dynamic turbo)
*/
int ic_nchans; /* # entries in ic_channels */
struct ieee80211_channel ic_channels[IEEE80211_CHAN_MAX];
uint8_t ic_chan_avail[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_active[IEEE80211_CHAN_BYTES];
uint8_t ic_chan_scan[IEEE80211_CHAN_BYTES];
struct ieee80211_channel *ic_curchan; /* current channel */
const struct ieee80211_rate_table *ic_rt; /* table for ic_curchan */
struct ieee80211_channel *ic_bsschan; /* bss channel */
struct ieee80211_channel *ic_prevchan; /* previous channel */
struct ieee80211_regdomain ic_regdomain;/* regulatory data */
struct ieee80211_appie *ic_countryie; /* calculated country ie */
struct ieee80211_channel *ic_countryie_chan;
/* 802.11h/DFS state */
struct ieee80211_channel *ic_csa_newchan;/* channel for doing CSA */
short ic_csa_mode; /* mode for doing CSA */
short ic_csa_count; /* count for doing CSA */
struct ieee80211_dfs_state ic_dfs; /* DFS state */
struct ieee80211_scan_state *ic_scan; /* scan state */
long long ic_lastdata; /* time of last data frame */
long long ic_lastscan; /* time last scan completed */
/* NB: this is the union of all vap stations/neighbors */
int ic_max_keyix; /* max h/w key index */
struct ieee80211_node_table ic_sta; /* stations/neighbors */
struct ieee80211_ageq ic_stageq; /* frame staging queue */
uint32_t ic_hash_key; /* random key for mac hash */
/* XXX multi-bss: split out common/vap parts */
struct ieee80211_wme_state ic_wme; /* WME/WMM state */
/* XXX multi-bss: can per-vap be done/make sense? */
enum ieee80211_protmode ic_protmode; /* 802.11g protection mode */
uint16_t ic_nonerpsta; /* # non-ERP stations */
uint16_t ic_longslotsta; /* # long slot time stations */
uint16_t ic_sta_assoc; /* stations associated */
uint16_t ic_ht_sta_assoc;/* HT stations associated */
uint16_t ic_ht40_sta_assoc;/* HT40 stations associated */
uint8_t ic_curhtprotmode;/* HTINFO bss state */
enum ieee80211_protmode ic_htprotmode; /* HT protection mode */
long long ic_lastnonerp; /* last time non-ERP sta noted*/
long long ic_lastnonht; /* last time non-HT sta noted */
/* optional state for Atheros SuperG protocol extensions */
struct ieee80211_superg *ic_superg;
/* radiotap handling */
struct ieee80211_radiotap_header *ic_th;/* tx radiotap headers */
void *ic_txchan; /* channel state in ic_th */
struct ieee80211_radiotap_header *ic_rh;/* rx radiotap headers */
void *ic_rxchan; /* channel state in ic_rh */
int ic_montaps; /* active monitor mode taps */
/* virtual ap create/delete */
struct ieee80211vap* (*ic_vap_create)(struct ieee80211com *,
const char name[IFNAMSIZ], int unit,
int opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
void (*ic_vap_delete)(struct ieee80211vap *);
/* operating mode attachment */
ieee80211vap_attach ic_vattach[IEEE80211_OPMODE_MAX];
/* return hardware/radio capabilities */
void (*ic_getradiocaps)(struct ieee80211com *,
int, int *, struct ieee80211_channel []);
/* check and/or prepare regdomain state change */
int (*ic_setregdomain)(struct ieee80211com *,
struct ieee80211_regdomain *,
int, struct ieee80211_channel []);
/* send/recv 802.11 management frame */
int (*ic_send_mgmt)(struct ieee80211_node *,
int, int);
/* send raw 802.11 frame */
int (*ic_raw_xmit)(struct ieee80211_node *,
struct mbuf *,
const struct ieee80211_bpf_params *);
/* update device state for 802.11 slot time change */
void (*ic_updateslot)(struct ifnet *);
/* handle multicast state changes */
void (*ic_update_mcast)(struct ifnet *);
/* handle promiscuous mode changes */
void (*ic_update_promisc)(struct ifnet *);
/* new station association callback/notification */
void (*ic_newassoc)(struct ieee80211_node *, int);
/* TDMA update notification */
void (*ic_tdma_update)(struct ieee80211_node *,
const struct ieee80211_tdma_param *, int);
/* node state management */
struct ieee80211_node* (*ic_node_alloc)(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
void (*ic_node_free)(struct ieee80211_node *);
void (*ic_node_cleanup)(struct ieee80211_node *);
void (*ic_node_age)(struct ieee80211_node *);
void (*ic_node_drain)(struct ieee80211_node *);
int8_t (*ic_node_getrssi)(const struct ieee80211_node*);
void (*ic_node_getsignal)(const struct ieee80211_node*,
int8_t *, int8_t *);
void (*ic_node_getmimoinfo)(
const struct ieee80211_node*,
struct ieee80211_mimo_info *);
/* scanning support */
void (*ic_scan_start)(struct ieee80211com *);
void (*ic_scan_end)(struct ieee80211com *);
void (*ic_set_channel)(struct ieee80211com *);
void (*ic_scan_curchan)(struct ieee80211_scan_state *,
unsigned long);
void (*ic_scan_mindwell)(struct ieee80211_scan_state *);
/*
* 802.11n ADDBA support. A simple/generic implementation
* of A-MPDU tx aggregation is provided; the driver may
* override these methods to provide their own support.
* A-MPDU rx re-ordering happens automatically if the
* driver passes out-of-order frames to ieee80211_input
* from an assocated HT station.
*/
int (*ic_recv_action)(struct ieee80211_node *,
const struct ieee80211_frame *,
const uint8_t *frm, const uint8_t *efrm);
int (*ic_send_action)(struct ieee80211_node *,
int category, int action, void *);
/* check if A-MPDU should be enabled this station+ac */
int (*ic_ampdu_enable)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
/* start/stop doing A-MPDU tx aggregation for a station */
int (*ic_addba_request)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int dialogtoken, int baparamset,
int batimeout);
int (*ic_addba_response)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *,
int status, int baparamset, int batimeout);
void (*ic_addba_stop)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *);
/* BAR response received */
void (*ic_bar_response)(struct ieee80211_node *,
struct ieee80211_tx_ampdu *, int status);
/* start/stop doing A-MPDU rx processing for a station */
int (*ic_ampdu_rx_start)(struct ieee80211_node *,
struct ieee80211_rx_ampdu *, int baparamset,
int batimeout, int baseqctl);
void (*ic_ampdu_rx_stop)(struct ieee80211_node *,
struct ieee80211_rx_ampdu *);
uint64_t ic_spare[8];
};
struct ieee80211_aclator;
struct ieee80211_tdma_state;
struct ieee80211_mesh_state;
struct ieee80211_hwmp_state;
struct ieee80211vap {
struct ifmedia iv_media; /* interface media config */
struct ifnet *iv_ifp; /* associated device */
struct bpf_if *iv_rawbpf; /* packet filter structure */
struct sysctl_ctx_list *iv_sysctl; /* dynamic sysctl context */
struct sysctl_oid *iv_oid; /* net.wlan.X sysctl oid */
TAILQ_ENTRY(ieee80211vap) iv_next; /* list of vap instances */
struct ieee80211com *iv_ic; /* back ptr to common state */
uint32_t iv_debug; /* debug msg flags */
struct ieee80211_stats iv_stats; /* statistics */
uint8_t iv_myaddr[IEEE80211_ADDR_LEN];
uint32_t iv_flags; /* state flags */
uint32_t iv_flags_ext; /* extended state flags */
uint32_t iv_flags_ht; /* HT state flags */
uint32_t iv_flags_ven; /* vendor state flags */
uint32_t iv_caps; /* capabilities */
uint32_t iv_htcaps; /* HT capabilities */
enum ieee80211_opmode iv_opmode; /* operation mode */
enum ieee80211_state iv_state; /* state machine state */
enum ieee80211_state iv_nstate; /* pending state */
int iv_nstate_arg; /* pending state arg */
struct task iv_nstate_task; /* deferred state processing */
struct task iv_swbmiss_task;/* deferred iv_bmiss call */
struct callout iv_mgtsend; /* mgmt frame response timer */
/* inactivity timer settings */
int iv_inact_init; /* setting for new station */
int iv_inact_auth; /* auth but not assoc setting */
int iv_inact_run; /* authorized setting */
int iv_inact_probe; /* inactive probe time */
int iv_des_nssid; /* # desired ssids */
struct ieee80211_scan_ssid iv_des_ssid[1];/* desired ssid table */
uint8_t iv_des_bssid[IEEE80211_ADDR_LEN];
struct ieee80211_channel *iv_des_chan; /* desired channel */
uint16_t iv_des_mode; /* desired mode */
int iv_nicknamelen; /* XXX junk */
uint8_t iv_nickname[IEEE80211_NWID_LEN];
u_int iv_bgscanidle; /* bg scan idle threshold */
u_int iv_bgscanintvl; /* bg scan min interval */
u_int iv_scanvalid; /* scan cache valid threshold */
u_int iv_scanreq_duration;
u_int iv_scanreq_mindwell;
u_int iv_scanreq_maxdwell;
uint16_t iv_scanreq_flags;/* held scan request params */
uint8_t iv_scanreq_nssid;
struct ieee80211_scan_ssid iv_scanreq_ssid[IEEE80211_SCAN_MAX_SSID];
/* sta-mode roaming state */
enum ieee80211_roamingmode iv_roaming; /* roaming mode */
struct ieee80211_roamparam iv_roamparms[IEEE80211_MODE_MAX];
uint8_t iv_bmissthreshold;
uint8_t iv_bmiss_count; /* current beacon miss count */
int iv_bmiss_max; /* max bmiss before scan */
uint16_t iv_swbmiss_count;/* beacons in last period */
uint16_t iv_swbmiss_period;/* s/w bmiss period */
struct callout iv_swbmiss; /* s/w beacon miss timer */
int iv_ampdu_rxmax; /* A-MPDU rx limit (bytes) */
int iv_ampdu_density;/* A-MPDU density */
int iv_ampdu_limit; /* A-MPDU tx limit (bytes) */
int iv_amsdu_limit; /* A-MSDU tx limit (bytes) */
u_int iv_ampdu_mintraffic[WME_NUM_AC];
uint32_t *iv_aid_bitmap; /* association id map */
uint16_t iv_max_aid;
uint16_t iv_sta_assoc; /* stations associated */
uint16_t iv_ps_sta; /* stations in power save */
uint16_t iv_ps_pending; /* ps sta's w/ pending frames */
uint16_t iv_txseq; /* mcast xmit seq# space */
uint16_t iv_tim_len; /* ic_tim_bitmap size (bytes) */
uint8_t *iv_tim_bitmap; /* power-save stations w/ data*/
uint8_t iv_dtim_period; /* DTIM period */
uint8_t iv_dtim_count; /* DTIM count from last bcn */
/* set/unset aid pwrsav state */
int iv_csa_count; /* count for doing CSA */
struct ieee80211_node *iv_bss; /* information for this node */
struct ieee80211_txparam iv_txparms[IEEE80211_MODE_MAX];
uint16_t iv_rtsthreshold;
uint16_t iv_fragthreshold;
int iv_inact_timer; /* inactivity timer wait */
/* application-specified IE's to attach to mgt frames */
struct ieee80211_appie *iv_appie_beacon;
struct ieee80211_appie *iv_appie_probereq;
struct ieee80211_appie *iv_appie_proberesp;
struct ieee80211_appie *iv_appie_assocreq;
struct ieee80211_appie *iv_appie_assocresp;
struct ieee80211_appie *iv_appie_wpa;
uint8_t *iv_wpa_ie;
uint8_t *iv_rsn_ie;
uint16_t iv_max_keyix; /* max h/w key index */
ieee80211_keyix iv_def_txkey; /* default/group tx key index */
struct ieee80211_key iv_nw_keys[IEEE80211_WEP_NKID];
int (*iv_key_alloc)(struct ieee80211vap *,
struct ieee80211_key *,
ieee80211_keyix *, ieee80211_keyix *);
int (*iv_key_delete)(struct ieee80211vap *,
const struct ieee80211_key *);
int (*iv_key_set)(struct ieee80211vap *,
const struct ieee80211_key *,
const uint8_t mac[IEEE80211_ADDR_LEN]);
void (*iv_key_update_begin)(struct ieee80211vap *);
void (*iv_key_update_end)(struct ieee80211vap *);
const struct ieee80211_authenticator *iv_auth; /* authenticator glue */
void *iv_ec; /* private auth state */
const struct ieee80211_aclator *iv_acl; /* acl glue */
void *iv_as; /* private aclator state */
struct ieee80211_tdma_state *iv_tdma; /* tdma state */
struct ieee80211_mesh_state *iv_mesh; /* MBSS state */
struct ieee80211_hwmp_state *iv_hwmp; /* HWMP state */
/* operate-mode detach hook */
void (*iv_opdetach)(struct ieee80211vap *);
/* receive processing */
int (*iv_input)(struct ieee80211_node *,
struct mbuf *, int, int);
void (*iv_recv_mgmt)(struct ieee80211_node *,
struct mbuf *, int, int, int);
void (*iv_recv_ctl)(struct ieee80211_node *,
struct mbuf *, int);
void (*iv_deliver_data)(struct ieee80211vap *,
struct ieee80211_node *, struct mbuf *);
#if 0
/* send processing */
int (*iv_send_mgmt)(struct ieee80211_node *,
int, int);
#endif
/* beacon miss processing */
void (*iv_bmiss)(struct ieee80211vap *);
/* reset device state after 802.11 parameter/state change */
int (*iv_reset)(struct ieee80211vap *, u_long);
/* [schedule] beacon frame update */
void (*iv_update_beacon)(struct ieee80211vap *, int);
/* power save handling */
void (*iv_update_ps)(struct ieee80211vap *, int);
int (*iv_set_tim)(struct ieee80211_node *, int);
/* state machine processing */
int (*iv_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
/* 802.3 output method for raw frame xmit */
int (*iv_output)(struct ifnet *, struct mbuf *,
struct sockaddr *, struct route *);
uint64_t iv_spare[8];
};
#define IEEE80211_ADDR_EQ(a1,a2) (memcmp(a1,a2,IEEE80211_ADDR_LEN) == 0)
#define IEEE80211_ADDR_COPY(dst,src) memcpy(dst,src,IEEE80211_ADDR_LEN)
/* ic_flags/iv_flags */
#define IEEE80211_F_TURBOP 0x00000001 /* CONF: ATH Turbo enabled*/
#define IEEE80211_F_COMP 0x00000002 /* CONF: ATH comp enabled */
#define IEEE80211_F_FF 0x00000004 /* CONF: ATH FF enabled */
#define IEEE80211_F_BURST 0x00000008 /* CONF: bursting enabled */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_PRIVACY */
#define IEEE80211_F_PRIVACY 0x00000010 /* CONF: privacy enabled */
#define IEEE80211_F_PUREG 0x00000020 /* CONF: 11g w/o 11b sta's */
#define IEEE80211_F_SCAN 0x00000080 /* STATUS: scanning */
#define IEEE80211_F_ASCAN 0x00000100 /* STATUS: active scan */
#define IEEE80211_F_SIBSS 0x00000200 /* STATUS: start IBSS */
/* NB: this is intentionally setup to be IEEE80211_CAPINFO_SHORT_SLOTTIME */
#define IEEE80211_F_SHSLOT 0x00000400 /* STATUS: use short slot time*/
#define IEEE80211_F_PMGTON 0x00000800 /* CONF: Power mgmt enable */
#define IEEE80211_F_DESBSSID 0x00001000 /* CONF: des_bssid is set */
#define IEEE80211_F_WME 0x00002000 /* CONF: enable WME use */
#define IEEE80211_F_BGSCAN 0x00004000 /* CONF: bg scan enabled (???)*/
#define IEEE80211_F_SWRETRY 0x00008000 /* CONF: sw tx retry enabled */
#define IEEE80211_F_TXPOW_FIXED 0x00010000 /* TX Power: fixed rate */
#define IEEE80211_F_IBSSON 0x00020000 /* CONF: IBSS creation enable */
#define IEEE80211_F_SHPREAMBLE 0x00040000 /* STATUS: use short preamble */
#define IEEE80211_F_DATAPAD 0x00080000 /* CONF: do alignment pad */
#define IEEE80211_F_USEPROT 0x00100000 /* STATUS: protection enabled */
#define IEEE80211_F_USEBARKER 0x00200000 /* STATUS: use barker preamble*/
#define IEEE80211_F_CSAPENDING 0x00400000 /* STATUS: chan switch pending*/
#define IEEE80211_F_WPA1 0x00800000 /* CONF: WPA enabled */
#define IEEE80211_F_WPA2 0x01000000 /* CONF: WPA2 enabled */
#define IEEE80211_F_WPA 0x01800000 /* CONF: WPA/WPA2 enabled */
#define IEEE80211_F_DROPUNENC 0x02000000 /* CONF: drop unencrypted */
#define IEEE80211_F_COUNTERM 0x04000000 /* CONF: TKIP countermeasures */
#define IEEE80211_F_HIDESSID 0x08000000 /* CONF: hide SSID in beacon */
#define IEEE80211_F_NOBRIDGE 0x10000000 /* CONF: dis. internal bridge */
#define IEEE80211_F_PCF 0x20000000 /* CONF: PCF enabled */
#define IEEE80211_F_DOTH 0x40000000 /* CONF: 11h enabled */
#define IEEE80211_F_DWDS 0x80000000 /* CONF: Dynamic WDS enabled */
#define IEEE80211_F_BITS \
"\20\1TURBOP\2COMP\3FF\4BURST\5PRIVACY\6PUREG\10SCAN\11ASCAN\12SIBSS" \
"\13SHSLOT\14PMGTON\15DESBSSID\16WME\17BGSCAN\20SWRETRY\21TXPOW_FIXED" \
"\22IBSSON\23SHPREAMBLE\24DATAPAD\25USEPROT\26USERBARKER\27CSAPENDING" \
"\30WPA1\31WPA2\32DROPUNENC\33COUNTERM\34HIDESSID\35NOBRIDG\36PCF" \
"\37DOTH\40DWDS"
/* Atheros protocol-specific flags */
#define IEEE80211_F_ATHEROS \
(IEEE80211_F_FF | IEEE80211_F_COMP | IEEE80211_F_TURBOP)
/* Check if an Atheros capability was negotiated for use */
#define IEEE80211_ATH_CAP(vap, ni, bit) \
((vap)->iv_flags & (ni)->ni_ath_flags & (bit))
/* ic_flags_ext/iv_flags_ext */
#define IEEE80211_FEXT_INACT 0x00000002 /* CONF: sta inact handling */
#define IEEE80211_FEXT_SCANWAIT 0x00000004 /* STATUS: awaiting scan */
/* 0x00000006 reserved */
#define IEEE80211_FEXT_BGSCAN 0x00000008 /* STATUS: complete bgscan */
#define IEEE80211_FEXT_WPS 0x00000010 /* CONF: WPS enabled */
#define IEEE80211_FEXT_TSN 0x00000020 /* CONF: TSN enabled */
#define IEEE80211_FEXT_SCANREQ 0x00000040 /* STATUS: scan req params */
#define IEEE80211_FEXT_RESUME 0x00000080 /* STATUS: start on resume */
#define IEEE80211_FEXT_4ADDR 0x00000100 /* CONF: apply 4-addr encap */
#define IEEE80211_FEXT_NONERP_PR 0x00000200 /* STATUS: non-ERP sta present*/
#define IEEE80211_FEXT_SWBMISS 0x00000400 /* CONF: do bmiss in s/w */
#define IEEE80211_FEXT_DFS 0x00000800 /* CONF: DFS enabled */
#define IEEE80211_FEXT_DOTD 0x00001000 /* CONF: 11d enabled */
#define IEEE80211_FEXT_STATEWAIT 0x00002000 /* STATUS: awaiting state chg */
#define IEEE80211_FEXT_REINIT 0x00004000 /* STATUS: INIT state first */
#define IEEE80211_FEXT_BPF 0x00008000 /* STATUS: BPF tap present */
/* NB: immutable: should be set only when creating a vap */
#define IEEE80211_FEXT_WDSLEGACY 0x00010000 /* CONF: legacy WDS operation */
#define IEEE80211_FEXT_PROBECHAN 0x00020000 /* CONF: probe passive channel*/
#define IEEE80211_FEXT_BITS \
"\20\2INACT\3SCANWAIT\4BGSCAN\5WPS\6TSN\7SCANREQ\10RESUME" \
"\0114ADDR\12NONEPR_PR\13SWBMISS\14DFS\15DOTD\16STATEWAIT\17REINIT" \
"\20BPF\21WDSLEGACY\22PROBECHAN"
/* ic_flags_ht/iv_flags_ht */
#define IEEE80211_FHT_NONHT_PR 0x00000001 /* STATUS: non-HT sta present */
#define IEEE80211_FHT_GF 0x00040000 /* CONF: Greenfield enabled */
#define IEEE80211_FHT_HT 0x00080000 /* CONF: HT supported */
#define IEEE80211_FHT_AMPDU_TX 0x00100000 /* CONF: A-MPDU tx supported */
#define IEEE80211_FHT_AMPDU_RX 0x00200000 /* CONF: A-MPDU rx supported */
#define IEEE80211_FHT_AMSDU_TX 0x00400000 /* CONF: A-MSDU tx supported */
#define IEEE80211_FHT_AMSDU_RX 0x00800000 /* CONF: A-MSDU rx supported */
#define IEEE80211_FHT_USEHT40 0x01000000 /* CONF: 20/40 use enabled */
#define IEEE80211_FHT_PUREN 0x02000000 /* CONF: 11n w/o legacy sta's */
#define IEEE80211_FHT_SHORTGI20 0x04000000 /* CONF: short GI in HT20 */
#define IEEE80211_FHT_SHORTGI40 0x08000000 /* CONF: short GI in HT40 */
#define IEEE80211_FHT_HTCOMPAT 0x10000000 /* CONF: HT vendor OUI's */
#define IEEE80211_FHT_RIFS 0x20000000 /* CONF: RIFS enabled */
#define IEEE80211_FHT_STBC_TX 0x40000000 /* CONF: STBC tx enabled */
#define IEEE80211_FHT_STBC_RX 0x80000000 /* CONF: STBC rx enabled */
#define IEEE80211_FHT_BITS \
"\20\1NONHT_PR" \
"\23GF\24HT\25AMDPU_TX\26AMPDU_TX" \
"\27AMSDU_TX\30AMSDU_RX\31USEHT40\32PUREN\33SHORTGI20\34SHORTGI40" \
"\35HTCOMPAT\36RIFS\37STBC_TX\40STBC_RX"
#define IEEE80211_FVEN_BITS "\20"
/* ic_caps/iv_caps: device driver capabilities */
/* 0x2e available */
#define IEEE80211_C_STA 0x00000001 /* CAPABILITY: STA available */
#define IEEE80211_C_8023ENCAP 0x00000002 /* CAPABILITY: 802.3 encap */
#define IEEE80211_C_FF 0x00000040 /* CAPABILITY: ATH FF avail */
#define IEEE80211_C_TURBOP 0x00000080 /* CAPABILITY: ATH Turbo avail*/
#define IEEE80211_C_IBSS 0x00000100 /* CAPABILITY: IBSS available */
#define IEEE80211_C_PMGT 0x00000200 /* CAPABILITY: Power mgmt */
#define IEEE80211_C_HOSTAP 0x00000400 /* CAPABILITY: HOSTAP avail */
#define IEEE80211_C_AHDEMO 0x00000800 /* CAPABILITY: Old Adhoc Demo */
#define IEEE80211_C_SWRETRY 0x00001000 /* CAPABILITY: sw tx retry */
#define IEEE80211_C_TXPMGT 0x00002000 /* CAPABILITY: tx power mgmt */
#define IEEE80211_C_SHSLOT 0x00004000 /* CAPABILITY: short slottime */
#define IEEE80211_C_SHPREAMBLE 0x00008000 /* CAPABILITY: short preamble */
#define IEEE80211_C_MONITOR 0x00010000 /* CAPABILITY: monitor mode */
#define IEEE80211_C_DFS 0x00020000 /* CAPABILITY: DFS/radar avail*/
#define IEEE80211_C_MBSS 0x00040000 /* CAPABILITY: MBSS available */
/* 0x7c0000 available */
#define IEEE80211_C_WPA1 0x00800000 /* CAPABILITY: WPA1 avail */
#define IEEE80211_C_WPA2 0x01000000 /* CAPABILITY: WPA2 avail */
#define IEEE80211_C_WPA 0x01800000 /* CAPABILITY: WPA1+WPA2 avail*/
#define IEEE80211_C_BURST 0x02000000 /* CAPABILITY: frame bursting */
#define IEEE80211_C_WME 0x04000000 /* CAPABILITY: WME avail */
#define IEEE80211_C_WDS 0x08000000 /* CAPABILITY: 4-addr support */
/* 0x10000000 reserved */
#define IEEE80211_C_BGSCAN 0x20000000 /* CAPABILITY: bg scanning */
#define IEEE80211_C_TXFRAG 0x40000000 /* CAPABILITY: tx fragments */
#define IEEE80211_C_TDMA 0x80000000 /* CAPABILITY: TDMA avail */
/* XXX protection/barker? */
#define IEEE80211_C_OPMODE \
(IEEE80211_C_STA | IEEE80211_C_IBSS | IEEE80211_C_HOSTAP | \
IEEE80211_C_AHDEMO | IEEE80211_C_MONITOR | IEEE80211_C_WDS | \
IEEE80211_C_TDMA | IEEE80211_C_MBSS)
#define IEEE80211_C_BITS \
"\20\1STA\002803ENCAP\7FF\10TURBOP\11IBSS\12PMGT" \
"\13HOSTAP\14AHDEMO\15SWRETRY\16TXPMGT\17SHSLOT\20SHPREAMBLE" \
"\21MONITOR\22DFS\23MBSS\30WPA1\31WPA2\32BURST\33WME\34WDS\36BGSCAN" \
"\37TXFRAG\40TDMA"
/*
* ic_htcaps/iv_htcaps: HT-specific device/driver capabilities
*
* NB: the low 16-bits are the 802.11 definitions, the upper
* 16-bits are used to define s/w/driver capabilities.
*/
#define IEEE80211_HTC_AMPDU 0x00010000 /* CAPABILITY: A-MPDU tx */
#define IEEE80211_HTC_AMSDU 0x00020000 /* CAPABILITY: A-MSDU tx */
/* NB: HT40 is implied by IEEE80211_HTCAP_CHWIDTH40 */
#define IEEE80211_HTC_HT 0x00040000 /* CAPABILITY: HT operation */
#define IEEE80211_HTC_SMPS 0x00080000 /* CAPABILITY: MIMO power save*/
#define IEEE80211_HTC_RIFS 0x00100000 /* CAPABILITY: RIFS support */
#define IEEE80211_C_HTCAP_BITS \
"\20\1LDPC\2CHWIDTH40\5GREENFIELD\6SHORTGI20\7SHORTGI40\10TXSTBC" \
"\21AMPDU\22AMSDU\23HT\24SMPS\25RIFS"
void ieee80211_ifattach(struct ieee80211com *,
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
void ieee80211_ifdetach(struct ieee80211com *);
int ieee80211_vap_setup(struct ieee80211com *, struct ieee80211vap *,
const char name[IFNAMSIZ], int unit, int opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t macaddr[IEEE80211_ADDR_LEN]);
int ieee80211_vap_attach(struct ieee80211vap *,
ifm_change_cb_t, ifm_stat_cb_t);
void ieee80211_vap_detach(struct ieee80211vap *);
const struct ieee80211_rateset *ieee80211_get_suprates(struct ieee80211com *ic,
const struct ieee80211_channel *);
void ieee80211_announce(struct ieee80211com *);
void ieee80211_announce_channels(struct ieee80211com *);
void ieee80211_drain(struct ieee80211com *);
void ieee80211_media_init(struct ieee80211com *);
struct ieee80211com *ieee80211_find_vap(const uint8_t mac[IEEE80211_ADDR_LEN]);
int ieee80211_media_change(struct ifnet *);
void ieee80211_media_status(struct ifnet *, struct ifmediareq *);
int ieee80211_ioctl(struct ifnet *, u_long, caddr_t);
int ieee80211_rate2media(struct ieee80211com *, int,
enum ieee80211_phymode);
int ieee80211_media2rate(int);
int ieee80211_mhz2ieee(u_int, u_int);
int ieee80211_chan2ieee(struct ieee80211com *,
const struct ieee80211_channel *);
u_int ieee80211_ieee2mhz(u_int, u_int);
struct ieee80211_channel *ieee80211_find_channel(struct ieee80211com *,
int freq, int flags);
struct ieee80211_channel *ieee80211_find_channel_byieee(struct ieee80211com *,
int ieee, int flags);
int ieee80211_setmode(struct ieee80211com *, enum ieee80211_phymode);
enum ieee80211_phymode ieee80211_chan2mode(const struct ieee80211_channel *);
uint32_t ieee80211_mac_hash(const struct ieee80211com *,
const uint8_t addr[IEEE80211_ADDR_LEN]);
void ieee80211_radiotap_attach(struct ieee80211com *,
struct ieee80211_radiotap_header *th, int tlen,
uint32_t tx_radiotap,
struct ieee80211_radiotap_header *rh, int rlen,
uint32_t rx_radiotap);
void ieee80211_radiotap_detach(struct ieee80211com *);
void ieee80211_radiotap_vattach(struct ieee80211vap *);
void ieee80211_radiotap_vdetach(struct ieee80211vap *);
void ieee80211_radiotap_chan_change(struct ieee80211com *);
void ieee80211_radiotap_tx(struct ieee80211vap *, struct mbuf *);
void ieee80211_radiotap_rx(struct ieee80211vap *, struct mbuf *);
void ieee80211_radiotap_rx_all(struct ieee80211com *, struct mbuf *);
static __inline int
ieee80211_radiotap_active(const struct ieee80211com *ic)
{
return (ic->ic_flags_ext & IEEE80211_FEXT_BPF) != 0;
}
static __inline int
ieee80211_radiotap_active_vap(const struct ieee80211vap *vap)
{
return (vap->iv_flags_ext & IEEE80211_FEXT_BPF) ||
vap->iv_ic->ic_montaps != 0;
}
/*
* Enqueue a task on the state thread.
*/
static __inline void
ieee80211_runtask(struct ieee80211com *ic, struct task *task)
{
taskqueue_enqueue(ic->ic_tq, task);
}
/*
* Wait for a queued task to complete.
*/
static __inline void
ieee80211_draintask(struct ieee80211com *ic, struct task *task)
{
taskqueue_drain(ic->ic_tq, task);
}
/*
* Key update synchronization methods. XXX should not be visible.
*/
static __inline void
ieee80211_key_update_begin(struct ieee80211vap *vap)
{
vap->iv_key_update_begin(vap);
}
static __inline void
ieee80211_key_update_end(struct ieee80211vap *vap)
{
vap->iv_key_update_end(vap);
}
/*
* XXX these need to be here for IEEE80211_F_DATAPAD
*/
/*
* Return the space occupied by the 802.11 header and any
* padding required by the driver. This works for a
* management or data frame.
*/
static __inline int
ieee80211_hdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_hdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
/*
* Like ieee80211_hdrspace, but handles any type of frame.
*/
static __inline int
ieee80211_anyhdrspace(struct ieee80211com *ic, const void *data)
{
int size = ieee80211_anyhdrsize(data);
if (ic->ic_flags & IEEE80211_F_DATAPAD)
size = roundup(size, sizeof(uint32_t));
return size;
}
/*
* Notify a vap that beacon state has been updated.
*/
static __inline void
ieee80211_beacon_notify(struct ieee80211vap *vap, int what)
{
if (vap->iv_state == IEEE80211_S_RUN)
vap->iv_update_beacon(vap, what);
}
/*
* Calculate HT channel promotion flags for a channel.
* XXX belongs in ieee80211_ht.h but needs IEEE80211_FHT_*
*/
static __inline int
ieee80211_htchanflags(const struct ieee80211_channel *c)
{
return IEEE80211_IS_CHAN_HT40(c) ?
IEEE80211_FHT_HT | IEEE80211_FHT_USEHT40 :
IEEE80211_IS_CHAN_HT(c) ? IEEE80211_FHT_HT : 0;
}
/*
* Debugging facilities compiled in when IEEE80211_DEBUG is defined.
*
* The intent is that any problem in the net80211 layer can be
* diagnosed by inspecting the statistics (dumped by the wlanstats
* program) and/or the msgs generated by net80211. Messages are
* broken into functional classes and can be controlled with the
* wlandebug program. Certain of these msg groups are for facilities
* that are no longer part of net80211 (e.g. IEEE80211_MSG_DOT1XSM).
*/
#define IEEE80211_MSG_11N 0x80000000 /* 11n mode debug */
#define IEEE80211_MSG_DEBUG 0x40000000 /* IFF_DEBUG equivalent */
#define IEEE80211_MSG_DUMPPKTS 0x20000000 /* IFF_LINK2 equivalant */
#define IEEE80211_MSG_CRYPTO 0x10000000 /* crypto work */
#define IEEE80211_MSG_INPUT 0x08000000 /* input handling */
#define IEEE80211_MSG_XRATE 0x04000000 /* rate set handling */
#define IEEE80211_MSG_ELEMID 0x02000000 /* element id parsing */
#define IEEE80211_MSG_NODE 0x01000000 /* node handling */
#define IEEE80211_MSG_ASSOC 0x00800000 /* association handling */
#define IEEE80211_MSG_AUTH 0x00400000 /* authentication handling */
#define IEEE80211_MSG_SCAN 0x00200000 /* scanning */
#define IEEE80211_MSG_OUTPUT 0x00100000 /* output handling */
#define IEEE80211_MSG_STATE 0x00080000 /* state machine */
#define IEEE80211_MSG_POWER 0x00040000 /* power save handling */
#define IEEE80211_MSG_HWMP 0x00020000 /* hybrid mesh protocol */
#define IEEE80211_MSG_DOT1XSM 0x00010000 /* 802.1x state machine */
#define IEEE80211_MSG_RADIUS 0x00008000 /* 802.1x radius client */
#define IEEE80211_MSG_RADDUMP 0x00004000 /* dump 802.1x radius packets */
#define IEEE80211_MSG_MESH 0x00002000 /* mesh networking */
#define IEEE80211_MSG_WPA 0x00001000 /* WPA/RSN protocol */
#define IEEE80211_MSG_ACL 0x00000800 /* ACL handling */
#define IEEE80211_MSG_WME 0x00000400 /* WME protocol */
#define IEEE80211_MSG_SUPERG 0x00000200 /* Atheros SuperG protocol */
#define IEEE80211_MSG_DOTH 0x00000100 /* 802.11h support */
#define IEEE80211_MSG_INACT 0x00000080 /* inactivity handling */
#define IEEE80211_MSG_ROAM 0x00000040 /* sta-mode roaming */
#define IEEE80211_MSG_RATECTL 0x00000020 /* tx rate control */
#define IEEE80211_MSG_ACTION 0x00000010 /* action frame handling */
#define IEEE80211_MSG_WDS 0x00000008 /* WDS handling */
#define IEEE80211_MSG_IOCTL 0x00000004 /* ioctl handling */
#define IEEE80211_MSG_TDMA 0x00000002 /* TDMA handling */
#define IEEE80211_MSG_ANY 0xffffffff /* anything */
#define IEEE80211_MSG_BITS \
"\20\2TDMA\3IOCTL\4WDS\5ACTION\6RATECTL\7ROAM\10INACT\11DOTH\12SUPERG" \
"\13WME\14ACL\15WPA\16RADKEYS\17RADDUMP\20RADIUS\21DOT1XSM\22HWMP" \
"\23POWER\24STATE\25OUTPUT\26SCAN\27AUTH\30ASSOC\31NODE\32ELEMID" \
"\33XRATE\34INPUT\35CRYPTO\36DUPMPKTS\37DEBUG\04011N"
#ifdef IEEE80211_DEBUG
#define ieee80211_msg(_vap, _m) ((_vap)->iv_debug & (_m))
#define IEEE80211_DPRINTF(_vap, _m, _fmt, ...) do { \
if (ieee80211_msg(_vap, _m)) \
ieee80211_note(_vap, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...) do { \
if (ieee80211_msg(_vap, _m)) \
ieee80211_note_mac(_vap, (_ni)->ni_macaddr, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...) do { \
if (ieee80211_msg(_vap, _m)) \
ieee80211_note_mac(_vap, _mac, _fmt, __VA_ARGS__); \
} while (0)
#define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...) do { \
if (ieee80211_msg(_vap, _m)) \
ieee80211_note_frame(_vap, _wh, _fmt, __VA_ARGS__); \
} while (0)
void ieee80211_note(struct ieee80211vap *, const char *, ...);
void ieee80211_note_mac(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *, ...);
void ieee80211_note_frame(struct ieee80211vap *,
const struct ieee80211_frame *, const char *, ...);
#define ieee80211_msg_debug(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_DEBUG)
#define ieee80211_msg_dumppkts(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_DUMPPKTS)
#define ieee80211_msg_input(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_INPUT)
#define ieee80211_msg_radius(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_RADIUS)
#define ieee80211_msg_dumpradius(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_RADDUMP)
#define ieee80211_msg_dumpradkeys(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_RADKEYS)
#define ieee80211_msg_scan(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_SCAN)
#define ieee80211_msg_assoc(_vap) \
((_vap)->iv_debug & IEEE80211_MSG_ASSOC)
/*
* Emit a debug message about discarding a frame or information
* element. One format is for extracting the mac address from
* the frame header; the other is for when a header is not
* available or otherwise appropriate.
*/
#define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...) do { \
if ((_vap)->iv_debug & (_m)) \
ieee80211_discard_frame(_vap, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...) do { \
if ((_vap)->iv_debug & (_m)) \
ieee80211_discard_ie(_vap, _wh, _type, _fmt, __VA_ARGS__);\
} while (0)
#define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...) do { \
if ((_vap)->iv_debug & (_m)) \
ieee80211_discard_mac(_vap, _mac, _type, _fmt, __VA_ARGS__);\
} while (0)
void ieee80211_discard_frame(struct ieee80211vap *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_ie(struct ieee80211vap *,
const struct ieee80211_frame *, const char *type, const char *fmt, ...);
void ieee80211_discard_mac(struct ieee80211vap *,
const uint8_t mac[IEEE80211_ADDR_LEN], const char *type,
const char *fmt, ...);
#else
#define IEEE80211_DPRINTF(_vap, _m, _fmt, ...)
#define IEEE80211_NOTE(_vap, _m, _ni, _fmt, ...)
#define IEEE80211_NOTE_FRAME(_vap, _m, _wh, _fmt, ...)
#define IEEE80211_NOTE_MAC(_vap, _m, _mac, _fmt, ...)
#define ieee80211_msg_dumppkts(_vap) 0
#define ieee80211_msg(_vap, _m) 0
#define IEEE80211_DISCARD(_vap, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_IE(_vap, _m, _wh, _type, _fmt, ...)
#define IEEE80211_DISCARD_MAC(_vap, _m, _mac, _type, _fmt, ...)
#endif
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_VAR_H_ */
src/libs/compat/freebsd_network/compat/net80211/ieee80211_wds.h
-39
View File
@@ -1,39 +0,0 @@
/*-
* Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _FBSD_COMPAT_NET80211_IEEE80211_WDS_H_
#define _FBSD_COMPAT_NET80211_IEEE80211_WDS_H_
/*
* WDS implementation definitions.
*/
void ieee80211_wds_attach(struct ieee80211com *);
void ieee80211_wds_detach(struct ieee80211com *);
void ieee80211_dwds_mcast(struct ieee80211vap *, struct mbuf *);
void ieee80211_dwds_discover(struct ieee80211_node *, struct mbuf *);
int ieee80211_node_wdsq_age(struct ieee80211_node *);
#endif /* _FBSD_COMPAT_NET80211_IEEE80211_WDS_H_ */
src/libs/compat/freebsd_network/compat/net80211/opt_inet.h
-6
View File
@@ -1,6 +0,0 @@
#ifndef _FBSD_COMPAT_NET80211_OPT_INET_H_
#define _FBSD_COMPAT_NET80211_OPT_INET_H_
#define INET 1
#endif /* _FBSD_COMPAT_NET80211_OPT_INET_H_ */
src/libs/compat/freebsd_network/compat/net80211/opt_inet6.h
-6
View File
@@ -1,6 +0,0 @@
#ifndef _FBSD_COMPAT_NET80211_OPT_INET6_H_
#define _FBSD_COMPAT_NET80211_OPT_INET6_H_
//#define INET6 1
#endif /* _FBSD_COMPAT_NET80211_OPT_INET6_H_ */
src/libs/compat/freebsd_network/compat/net80211/opt_ipx.h
-6
View File
@@ -1,6 +0,0 @@
#ifndef _FBSD_COMPAT_NET80211_OPT_IPX_H_
#define _FBSD_COMPAT_NET80211_OPT_IPX_H_
//define IPX 1
#endif /* _FBSD_COMPAT_NET80211_OPT_IPX_H_ */
src/libs/compat/freebsd_network/compat/net80211/opt_wlan.h
-8
View File
@@ -1,8 +0,0 @@
#ifndef _FBSD_COMPAT_NET80211_OPT_WLAN_H_
#define _FBSD_COMPAT_NET80211_OPT_WLAN_H_
#define IEEE80211_DEBUG 1
//#define IEEE80211_AMDPU_AGE 1
//#define IEEE80211_SUPPORT_MESH 1
#endif /* _FBSD_COMPAT_NET80211_OPT_WLAN_H_ */
src/libs/compat/freebsd_network/compat/sys/haiku-module.h
+4 -1
View File
@@ -60,6 +60,7 @@ status_t start_wlan(device_t);
status_t stop_wlan(device_t);
status_t wlan_control(void*, uint32, void*, size_t);
status_t wlan_close(void*);
status_t wlan_if_l2com_alloc(void*);
/* we define the driver methods with HAIKU_FBSD_DRIVER_GLUE to
* force the rest of the stuff to be linked back with the driver.
@@ -94,9 +95,11 @@ status_t wlan_close(void*);
status_t stop_wlan(device_t dev) \
{ return B_OK; } \
status_t wlan_control(void *cookie, uint32 op, void *arg, \
size_t length) \
size_t length) \
{ return B_BAD_VALUE; } \
status_t wlan_close(void* cookie) \
{ return B_OK; } \
status_t wlan_if_l2com_alloc(void* ifp) \
{ return B_OK; }
#define HAIKU_FBSD_WLAN_DRIVER_GLUE(publicname, name, busname) \
src/libs/compat/freebsd_network/if.c
+5 -6
View File
@@ -16,6 +16,7 @@
#include <compat/sys/bus.h>
#include <compat/sys/kernel.h>
#include <compat/sys/taskqueue.h>
#include <compat/net/if.h>
#include <compat/net/if_arp.h>
@@ -24,7 +25,6 @@
#include <compat/sys/malloc.h>
#include <compat/net/ethernet.h>
#include <compat/net80211/ieee80211_var.h>
/*
@@ -169,16 +169,15 @@ if_alloc(u_char type)
case IFT_ETHER:
{
ifp->if_l2com = _kernel_malloc(sizeof(struct arpcom), M_ZERO);
if (ifp->if_l2com == NULL)
goto err2;
IFP2AC(ifp)->ac_ifp = ifp;
break;
}
case IFT_IEEE80211:
{
ifp->if_l2com = _kernel_malloc(sizeof(struct ieee80211com), M_ZERO);
((struct ieee80211com *)(ifp->if_l2com))->ic_ifp = ifp;
if (ifp->if_l2com == NULL)
if (wlan_if_l2com_alloc(ifp) != B_OK)
goto err2;
break;
}
}
@@ -228,7 +227,7 @@ err1:
void
if_free(struct ifnet *ifp)
{
// IFT_IEEE80211 devices won't be in this list,
// IEEE80211 devices won't be in this list,
// so don't try to remove them.
if (ifp->if_type == IFT_ETHER)
remove_from_device_name_list(ifp);