FDT: Update ARM FDT's based on FreeBSD HEAD
* Pull in Beaglebone, Beaglebone Black, and Cubieboard because those could be targets some day
This commit is contained in:
Alexander von Gluck IV
@@ -0,0 +1,349 @@
|
||||
/*-
|
||||
* Copyright (c) 2012 Damjan Marion <[email protected]>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/ {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
interrupt-parent = <&AINTC>;
|
||||
|
||||
SOC: am335x {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
bus-frequency = <0>;
|
||||
|
||||
AINTC: interrupt-controller@48200000 {
|
||||
compatible = "ti,aintc";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = < 0x48200000 0x1000 >;
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a8-pmu";
|
||||
interrupts = <3>;
|
||||
};
|
||||
|
||||
scm@44e10000 {
|
||||
compatible = "ti,scm";
|
||||
reg = < 0x44e10000 0x2000 >;
|
||||
};
|
||||
|
||||
prcm@44E00000 {
|
||||
compatible = "am335x,prcm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E00000 0x1300 >;
|
||||
};
|
||||
|
||||
dmtimers@44E05000 {
|
||||
compatible = "ti,am335x-dmtimer";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x44E05000 0x1000
|
||||
0x44E31000 0x1000
|
||||
0x48040000 0x1000
|
||||
0x48042000 0x1000
|
||||
0x48044000 0x1000
|
||||
0x48046000 0x1000
|
||||
0x48048000 0x1000
|
||||
0x4804A000 0x1000 >;
|
||||
interrupts = < 66 67 68 69 92 93 94 95 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
rtc: rtc@44E3E000 {
|
||||
compatible = "ti,da830-rtc";
|
||||
reg = <0x44E3E000 0x1000>;
|
||||
interrupts = < 75 76 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
adc0: adc@44E0D000 {
|
||||
compatible = "ti,adc";
|
||||
reg = <0x44E0D000 0x2000>;
|
||||
interrupts = < 16 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
wdt1@44E35000 {
|
||||
compatible = "ti,omap3-wdt";
|
||||
reg = <0x44E35000 0x1000>;
|
||||
interrupts = <91>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
GPIO: gpio {
|
||||
#gpio-cells = <3>;
|
||||
compatible = "ti,gpio";
|
||||
gpio-controller;
|
||||
reg =< 0x44E07000 0x1000
|
||||
0x4804C000 0x1000
|
||||
0x481AC000 0x1000
|
||||
0x481AE000 0x1000 >;
|
||||
interrupts = < 96 97 98 99 32 33 62 63 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
uart0: serial@44E09000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x44E09000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 72 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 0 >;
|
||||
};
|
||||
|
||||
uart1: serial@48022000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x48022000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 73 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 1 >;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart2: serial@48024000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x48024000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 74 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 2 >;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart3: serial@481a6000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x481A6000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 44 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 3 >;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart4: serial@481a8000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x481A8000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 45 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 4 >;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uart5: serial@481aa000 {
|
||||
compatible = "ti,ns16550";
|
||||
reg = <0x481AA000 0x1000>;
|
||||
reg-shift = <2>;
|
||||
interrupts = < 46 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 48000000 >;
|
||||
uart-device-id = < 5 >;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
edma3@49000000 {
|
||||
compatible = "ti,edma3";
|
||||
reg =< 0x49000000 0x100000 /* Channel Controller Regs */
|
||||
0x49800000 0x100000 /* Transfer Controller 0 Regs */
|
||||
0x49900000 0x100000 /* Transfer Controller 1 Regs */
|
||||
0x49a00000 0x100000 >; /* Transfer Controller 2 Regs */
|
||||
interrupts = <12 13 14>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
mmchs0@48060000 {
|
||||
compatible = "ti,omap3-hsmmc", "ti,mmchs";
|
||||
reg =<0x48060000 0x1000 >;
|
||||
interrupts = <64>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
mmchs-device-id = <0>;
|
||||
mmchs-wp-gpio-pin = <0xffffffff>;
|
||||
ti,dual-volt;
|
||||
};
|
||||
|
||||
mmchs1@481D8000 {
|
||||
compatible = "ti,omap3-hsmmc", "ti,mmchs";
|
||||
reg =<0x481D8000 0x1000 >;
|
||||
interrupts = <28>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
mmchs-device-id = <1>;
|
||||
mmchs-wp-gpio-pin = <0xffffffff>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
enet0: ethernet@4A100000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "ti,cpsw";
|
||||
reg = <0x4A100000 0x4000>;
|
||||
interrupts = <40 41 42 43>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
phy-handle = <&phy0>;
|
||||
mdio@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,cpsw-mdio";
|
||||
phy0: ethernet-phy@0 {
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
i2c0: i2c@44e0b000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,i2c";
|
||||
reg =< 0x44e0b000 0x1000 >;
|
||||
interrupts = <70>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
i2c-device-id = <0>;
|
||||
};
|
||||
|
||||
i2c1: i2c@4802a000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,i2c";
|
||||
reg =< 0x4802a000 0x1000 >;
|
||||
interrupts = <71>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
i2c-device-id = <1>;
|
||||
};
|
||||
|
||||
i2c2: i2c@4819c000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,i2c";
|
||||
reg =< 0x4819c000 0x1000 >;
|
||||
interrupts = <30>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
i2c-device-id = <2>;
|
||||
};
|
||||
|
||||
pwm@48300000 {
|
||||
compatible = "ti,am335x-pwm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x48300000 0x100 /* PWMSS0 */
|
||||
0x48300100 0x80 /* eCAP0 */
|
||||
0x48300180 0x80 /* eQEP0 */
|
||||
0x48300200 0x60 /* ePWM0 */
|
||||
>;
|
||||
interrupts = <86 58>; /* ePWM0INT, ePWM0_TZINT */
|
||||
interrupt-parent = <&AINTC>;
|
||||
pwm-device-id = <0>;
|
||||
};
|
||||
|
||||
pwm@48302000 {
|
||||
compatible = "ti,am335x-pwm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x48302000 0x100 /* PWMSS1 */
|
||||
0x48302100 0x80 /* eCAP1 */
|
||||
0x48302180 0x80 /* eQEP1 */
|
||||
0x48302200 0x60 /* ePWM1 */
|
||||
>;
|
||||
interrupts = <87 59>; /* ePWM1INT, ePWM1_TZINT */
|
||||
interrupt-parent = <&AINTC>;
|
||||
pwm-device-id = <1>;
|
||||
};
|
||||
|
||||
pwm@48304000 {
|
||||
compatible = "ti,am335x-pwm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x48304000 0x100 /* PWMSS2 */
|
||||
0x48304100 0x80 /* eCAP2 */
|
||||
0x48304180 0x80 /* eQEP2 */
|
||||
0x48304200 0x60 /* ePWM2 */
|
||||
>;
|
||||
interrupts = <88 60>; /* ePWM2INT, ePWM2_TZINT */
|
||||
interrupt-parent = <&AINTC>;
|
||||
pwm-device-id = <2>;
|
||||
};
|
||||
|
||||
lcd: lcd@4830e000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,am335x-lcd";
|
||||
reg =< 0x4830e000 0x1000 >;
|
||||
interrupts = <36>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
usb@47400000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "ti,musb-am33xx";
|
||||
reg =< 0x47400000 0x1000 /* USBSS */
|
||||
0x47401000 0x300 /* USB0 */
|
||||
0x47401300 0x100 /* USB0_PHY */
|
||||
0x47401400 0x400 /* USB0_CORE */
|
||||
0x47401800 0x300 /* USB1 */
|
||||
0x47401B00 0x100 /* USB1_PHY */
|
||||
0x47401C00 0x400 /* USB1_CORE */
|
||||
>;
|
||||
interrupts = <17 18 19>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
/* 1 - Host Mode, 0 - Device Mode */
|
||||
modemask = <2>;
|
||||
};
|
||||
|
||||
mbox0@480C8000 {
|
||||
compatible = "am335x,system-mbox";
|
||||
reg = < 0x480C8000 0x1000 >;
|
||||
interrupts = <77>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
spinlock0@480CA000 {
|
||||
compatible = "am335x,spinlock";
|
||||
reg = < 0x480CA000 0x1000 >;
|
||||
};
|
||||
|
||||
pruss@4A300000 {
|
||||
compatible = "ti,pruss-v2";
|
||||
reg = <0x4A300000 0x80000>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
interrupts = <20 21 22 23 24 25 26 27>;
|
||||
};
|
||||
};
|
||||
};
|
||||
@@ -396,6 +396,34 @@
|
||||
};
|
||||
};
|
||||
|
||||
bsc0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "broadcom,bcm2835-bsc",
|
||||
"broadcom,bcm2708-bsc";
|
||||
reg = <0x205000 0x20>;
|
||||
interrupts = <61>;
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
|
||||
bsc1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "broadcom,bcm2835-bsc",
|
||||
"broadcom,bcm2708-bsc";
|
||||
reg = <0x804000 0x20>;
|
||||
interrupts = <61>;
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
|
||||
spi0 {
|
||||
compatible = "broadcom,bcm2835-spi",
|
||||
"broadcom,bcm2708-spi";
|
||||
reg = <0x204000 0x20>;
|
||||
interrupts = <62>;
|
||||
interrupt-parent = <&intc>;
|
||||
};
|
||||
|
||||
dma: dma {
|
||||
compatible = "broadcom,bcm2835-dma",
|
||||
"broadcom,bcm2708-dma";
|
||||
|
||||
@@ -0,0 +1,184 @@
|
||||
/*-
|
||||
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "am335x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "beaglebone-black";
|
||||
compatible = "beaglebone-black", "beaglebone", "ti,am335x";
|
||||
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
uart0 = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = < 0x80000000 0x20000000 >; /* 512MB RAM */
|
||||
};
|
||||
|
||||
am335x {
|
||||
scm@44e10000 {
|
||||
/* Set of triplets < padname, muxname, padstate> */
|
||||
scm-pad-config =
|
||||
/* I2C0 */
|
||||
"I2C0_SDA", "I2C0_SDA","i2c",
|
||||
"I2C0_SCL", "I2C0_SCL","i2c",
|
||||
/* I2C1 */
|
||||
"SPI0_D1", "I2C1_SDA", "i2c",
|
||||
"SPI0_CS0", "I2C1_SCL", "i2c",
|
||||
/* I2C2 */
|
||||
"UART1_CTSn", "I2C2_SDA", "i2c",
|
||||
"UART1_RTSn", "I2C2_SCL", "i2c",
|
||||
/* Ethernet */
|
||||
"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
|
||||
"MII1_TX_EN", "gmii1_txen", "output",
|
||||
"MII1_RX_DV", "gmii1_rxdv", "input_pulldown",
|
||||
"MII1_TXD3", "gmii1_txd3", "output",
|
||||
"MII1_TXD2", "gmii1_txd2", "output",
|
||||
"MII1_TXD1", "gmii1_txd1", "output",
|
||||
"MII1_TXD0", "gmii1_txd0", "output",
|
||||
"MII1_TX_CLK", "gmii1_txclk", "input_pulldown",
|
||||
"MII1_RX_CLK", "gmii1_rxclk", "input_pulldown",
|
||||
"MII1_RXD3", "gmii1_rxd3", "input_pulldown",
|
||||
"MII1_RXD2", "gmii1_rxd2", "input_pulldown",
|
||||
"MII1_RXD1", "gmii1_rxd1", "input_pulldown",
|
||||
"MII1_RXD0", "gmii1_rxd0", "input_pulldown",
|
||||
"MDIO", "mdio_data", "input_pullup",
|
||||
"MDC", "mdio_clk", "output_pullup",
|
||||
/* MMCSD0 */
|
||||
"MMC0_CMD", "mmc0_cmd", "input_pullup",
|
||||
"MMC0_CLK", "mmc0_clk", "input_pullup",
|
||||
"MMC0_DAT0", "mmc0_dat0", "input_pullup",
|
||||
"MMC0_DAT1", "mmc0_dat1", "input_pullup",
|
||||
"MMC0_DAT2", "mmc0_dat2", "input_pullup",
|
||||
"MMC0_DAT3", "mmc0_dat3", "input_pullup",
|
||||
/* MMC1 */
|
||||
"GPMC_CSn1", "mmc1_clk", "input_pullup",
|
||||
"GPMC_CSn2", "mmc1_cmd", "input_pullup",
|
||||
"GPMC_CSn3", "gpio2_0", "output_pullup", /* Reset */
|
||||
"GPMC_AD0", "mmc1_dat0", "input_pullup",
|
||||
"GPMC_AD1", "mmc1_dat1", "input_pullup",
|
||||
"GPMC_AD2", "mmc1_dat2", "input_pullup",
|
||||
"GPMC_AD3", "mmc1_dat3", "input_pullup",
|
||||
"GPMC_AD4", "mmc1_dat4", "input_pullup",
|
||||
"GPMC_AD5", "mmc1_dat5", "input_pullup",
|
||||
"GPMC_AD6", "mmc1_dat6", "input_pullup",
|
||||
"GPMC_AD7", "mmc1_dat7", "input_pullup",
|
||||
/* GPIO */
|
||||
"ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown",
|
||||
"GPMC_AD10", "gpio0_26", "input_pulldown",
|
||||
"GPMC_AD11", "gpio0_27", "input_pulldown",
|
||||
"GPMC_AD12", "gpio1_12", "input_pulldown",
|
||||
"GPMC_AD13", "gpio1_13", "input_pulldown",
|
||||
"GPMC_AD14", "gpio1_14", "input_pulldown",
|
||||
"GPMC_AD15", "gpio1_15", "input_pulldown",
|
||||
"GPMC_A0", "gpio1_16", "input_pulldown",
|
||||
"GPMC_A1", "gpio1_17", "input_pulldown",
|
||||
"GPMC_A5", "gpio1_21", "output", /* User LED 1 */
|
||||
"GPMC_A6", "gpio1_22", "output", /* User LED 2 */
|
||||
"GPMC_A7", "gpio1_23", "output", /* User LED 3 */
|
||||
"GPMC_A8", "gpio1_24", "output", /* User LED 4 */
|
||||
"GPMC_BEn1", "gpio1_28", "input_pulldown",
|
||||
"GPMC_CSn0", "gpio1_29", "input_pulldown",
|
||||
"GPMC_CLK", "gpio2_1", "input_pulldown",
|
||||
"LCD_DATA0", "gpio2_6", "input_pulldown",
|
||||
"LCD_DATA1", "gpio2_7", "input_pulldown",
|
||||
"LCD_DATA2", "gpio2_8", "input_pulldown",
|
||||
"LCD_DATA3", "gpio2_9", "input_pulldown",
|
||||
"LCD_DATA4", "gpio2_10", "input_pulldown",
|
||||
"LCD_DATA5", "gpio2_11", "input_pulldown",
|
||||
"LCD_DATA6", "gpio2_12", "input_pulldown",
|
||||
"LCD_DATA7", "gpio2_13", "input_pulldown",
|
||||
"LCD_VSYNC", "gpio2_22", "input_pulldown",
|
||||
"LCD_HSYNC", "gpio2_23", "input_pulldown",
|
||||
"LCD_PCLK", "gpio2_24", "input_pulldown",
|
||||
"LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown",
|
||||
"MCASP0_FSR", "gpio3_19", "input_pulldown",
|
||||
"MCASP0_AHCLKX", "gpio3_21", "input_pulldown",
|
||||
/* TIMERs */
|
||||
"GPMC_ADVn_ALE", "timer4", "output",
|
||||
"GPMC_BEn0_CLE", "timer5", "output",
|
||||
"GPMC_WEn", "timer6", "output",
|
||||
"GPMC_OEn_REn", "timer7", "output",
|
||||
/* USB0 and USB1 */
|
||||
"USB0_DRVVBUS", "USB0_DRVVBUS", "output",
|
||||
"USB1_DRVVBUS", "USB1_DRVVBUS", "output",
|
||||
/* PWM */
|
||||
"GPMC_A2", "ehrpwm1A", "output",
|
||||
"GPMC_A3", "ehrpwm1B", "output",
|
||||
"GPMC_AD8", "ehrpwm2A", "output",
|
||||
"GPMC_AD9", "ehrpwm2B", "output";
|
||||
};
|
||||
|
||||
mmchs1@481D8000 {
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
non-removable;
|
||||
};
|
||||
|
||||
i2c@44e0b000 {
|
||||
pmic@48 {
|
||||
compatible = "ti,am335x-pmic";
|
||||
reg = <0x48>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led1 {
|
||||
gpios = <&GPIO 53 2 0>;
|
||||
name = "led1";
|
||||
};
|
||||
|
||||
led2 {
|
||||
gpios = <&GPIO 54 2 0>;
|
||||
name = "led2";
|
||||
};
|
||||
|
||||
led3 {
|
||||
gpios = <&GPIO 55 2 0>;
|
||||
name = "led3";
|
||||
};
|
||||
|
||||
led4 {
|
||||
gpios = <&GPIO 56 2 0>;
|
||||
name = "led4";
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdin = "uart0";
|
||||
stdout = "uart0";
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,145 @@
|
||||
/*-
|
||||
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "am335x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "beaglebone";
|
||||
compatible = "beaglebone", "ti,am335x";
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
uart0 = &uart0;
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = < 0x80000000 0x10000000 >; /* 256MB RAM */
|
||||
};
|
||||
|
||||
am335x {
|
||||
scm@44e10000 {
|
||||
/* Set of triplets < padname, muxname, padstate> */
|
||||
scm-pad-config =
|
||||
/* I2C0 */
|
||||
"I2C0_SDA", "I2C0_SDA","i2c",
|
||||
"I2C0_SCL", "I2C0_SCL","i2c",
|
||||
/* Ethernet */
|
||||
"MII1_RX_ER", "gmii1_rxerr", "input_pulldown",
|
||||
"MII1_TX_EN", "gmii1_txen", "output",
|
||||
"MII1_RX_DV", "gmii1_rxdv", "input_pulldown",
|
||||
"MII1_TXD3", "gmii1_txd3", "output",
|
||||
"MII1_TXD2", "gmii1_txd2", "output",
|
||||
"MII1_TXD1", "gmii1_txd1", "output",
|
||||
"MII1_TXD0", "gmii1_txd0", "output",
|
||||
"MII1_TX_CLK", "gmii1_txclk", "input_pulldown",
|
||||
"MII1_RX_CLK", "gmii1_rxclk", "input_pulldown",
|
||||
"MII1_RXD3", "gmii1_rxd3", "input_pulldown",
|
||||
"MII1_RXD2", "gmii1_rxd2", "input_pulldown",
|
||||
"MII1_RXD1", "gmii1_rxd1", "input_pulldown",
|
||||
"MII1_RXD0", "gmii1_rxd0", "input_pulldown",
|
||||
"MDIO", "mdio_data", "input_pullup",
|
||||
"MDC", "mdio_clk", "output_pullup",
|
||||
/* MMCSD0 */
|
||||
"MMC0_CMD", "mmc0_cmd", "input_pullup",
|
||||
"MMC0_CLK", "mmc0_clk", "input_pullup",
|
||||
"MMC0_DAT0", "mmc0_dat0", "input_pullup",
|
||||
"MMC0_DAT1", "mmc0_dat1", "input_pullup",
|
||||
"MMC0_DAT2", "mmc0_dat2", "input_pullup",
|
||||
"MMC0_DAT3", "mmc0_dat3", "input_pullup",
|
||||
/* USB0 and USB1 */
|
||||
"USB0_DRVVBUS", "USB0_DRVVBUS", "output",
|
||||
"USB1_DRVVBUS", "USB1_DRVVBUS", "output",
|
||||
/* GPIO */
|
||||
"ECAP0_IN_PWM0_OUT", "gpio0_7", "input_pulldown",
|
||||
"GPMC_AD10", "gpio0_26", "input_pulldown",
|
||||
"GPMC_AD11", "gpio0_27", "input_pulldown",
|
||||
"GPMC_AD0", "gpio1_0", "input_pulldown",
|
||||
"GPMC_AD1", "gpio1_1", "input_pulldown",
|
||||
"GPMC_AD2", "gpio1_2", "input_pulldown",
|
||||
"GPMC_AD3", "gpio1_3", "input_pulldown",
|
||||
"GPMC_AD4", "gpio1_4", "input_pulldown",
|
||||
"GPMC_AD5", "gpio1_5", "input_pulldown",
|
||||
"GPMC_AD6", "gpio1_6", "input_pulldown",
|
||||
"GPMC_AD7", "gpio1_7", "input_pulldown",
|
||||
"GPMC_AD12", "gpio1_12", "input_pulldown",
|
||||
"GPMC_AD13", "gpio1_13", "input_pulldown",
|
||||
"GPMC_AD14", "gpio1_14", "input_pulldown",
|
||||
"GPMC_AD15", "gpio1_15", "input_pulldown",
|
||||
"GPMC_A0", "gpio1_16", "input_pulldown",
|
||||
"GPMC_A1", "gpio1_17", "input_pulldown",
|
||||
"GPMC_A5", "gpio1_21", "output", /* User LED 1 */
|
||||
"GPMC_A6", "gpio1_22", "output", /* User LED 2 */
|
||||
"GPMC_A7", "gpio1_23", "output", /* User LED 3 */
|
||||
"GPMC_A8", "gpio1_24", "output", /* User LED 4 */
|
||||
"GPMC_BEn1", "gpio1_28", "input_pulldown",
|
||||
"GPMC_CSn0", "gpio1_29", "input_pulldown",
|
||||
"GPMC_CSn1", "gpio1_30", "input_pulldown",
|
||||
"GPMC_CSn2", "gpio1_31", "input_pulldown",
|
||||
"GPMC_CLK", "gpio2_1", "input_pulldown",
|
||||
"LCD_DATA0", "gpio2_6", "input_pulldown",
|
||||
"LCD_DATA1", "gpio2_7", "input_pulldown",
|
||||
"LCD_DATA2", "gpio2_8", "input_pulldown",
|
||||
"LCD_DATA3", "gpio2_9", "input_pulldown",
|
||||
"LCD_DATA4", "gpio2_10", "input_pulldown",
|
||||
"LCD_DATA5", "gpio2_11", "input_pulldown",
|
||||
"LCD_DATA6", "gpio2_12", "input_pulldown",
|
||||
"LCD_DATA7", "gpio2_13", "input_pulldown",
|
||||
"LCD_VSYNC", "gpio2_22", "input_pulldown",
|
||||
"LCD_HSYNC", "gpio2_23", "input_pulldown",
|
||||
"LCD_PCLK", "gpio2_24", "input_pulldown",
|
||||
"LCD_AC_BIAS_EN", "gpio2_25", "input_pulldown",
|
||||
"MCASP0_FSR", "gpio3_19", "input_pulldown",
|
||||
"MCASP0_AHCLKX", "gpio3_21", "input_pulldown",
|
||||
/* TIMERs */
|
||||
"GPMC_ADVn_ALE", "timer4", "output",
|
||||
"GPMC_BEn0_CLE", "timer5", "output",
|
||||
"GPMC_WEn", "timer6", "output",
|
||||
"GPMC_OEn_REn", "timer7", "output",
|
||||
/* PWM */
|
||||
"GPMC_A2", "ehrpwm1A", "output",
|
||||
"GPMC_A3", "ehrpwm1B", "output",
|
||||
"GPMC_AD8", "ehrpwm2A", "output",
|
||||
"GPMC_AD9", "ehrpwm2B", "output";
|
||||
};
|
||||
|
||||
i2c@44e0b000 {
|
||||
pmic@24 {
|
||||
compatible = "ti,am335x-pmic";
|
||||
reg = <0x48>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdin = "uart0";
|
||||
stdout = "uart0";
|
||||
};
|
||||
};
|
||||
@@ -0,0 +1,71 @@
|
||||
/*-
|
||||
* Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "sun4i-a10.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Cubietech Cubieboard";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = < 0x40000000 0x40000000 >; /* 1GB RAM */
|
||||
};
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
UART0 = &UART0;
|
||||
};
|
||||
|
||||
SOC: a10 {
|
||||
|
||||
usb1: usb@01c14000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: usb@01c1c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
UART0: serial@01c28000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
emac@01c0b000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "-v";
|
||||
stdin = "UART0";
|
||||
stdout = "UART0";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,75 @@
|
||||
/*-
|
||||
* Copyright (c) 2013 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
/include/ "sun7i-a20.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Cubietech Cubieboard2";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = < 0x40000000 0x40000000 >; /* 1GB RAM */
|
||||
};
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
UART0 = &UART0;
|
||||
};
|
||||
|
||||
SOC: a20 {
|
||||
|
||||
usb1: usb@01c14000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: usb@01c1c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
UART0: serial@01c28000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
emac@01c0b000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ahci: sata@01c18000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "-v";
|
||||
stdin = "UART0";
|
||||
stdout = "UART0";
|
||||
};
|
||||
};
|
||||
|
||||
@@ -28,13 +28,24 @@
|
||||
|
||||
/include/ "bcm2835.dtsi"
|
||||
|
||||
/memreserve/ 0x08000000 0x08000000; /* Set by VideoCore */
|
||||
|
||||
/ {
|
||||
model = "Raspberry Pi (BCM2835)";
|
||||
compatible = "raspberrypi,model-a", "raspberrypi,model-b",
|
||||
"broadcom,bcm2835-vc", "broadcom,bcm2708-vc";
|
||||
|
||||
memreserve = <0x08000000 0x08000000>; /* Set by VideoCore */
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cpu@0 {
|
||||
compatible = "arm,1176jzf-s";
|
||||
device_type = "cpu";
|
||||
reg = <0>; /* CPU ID=0 */
|
||||
clock-frequency = <700000000>; /* 700MHz */
|
||||
};
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0 0x8000000>; /* 128MB, Set by VideoCore */
|
||||
|
||||
@@ -0,0 +1,133 @@
|
||||
/*-
|
||||
* Copyright (c) 2014 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "allwinner,sun4i-a10";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
interrupt-parent = <&AINTC>;
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
};
|
||||
|
||||
SOC: a10 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
bus-frequency = <0>;
|
||||
|
||||
AINTC: interrupt-controller@01c20400 {
|
||||
compatible = "allwinner,sun4i-ic";
|
||||
interrupt-controller;
|
||||
#address-cells = <0>;
|
||||
#interrupt-cells = <1>;
|
||||
reg = < 0x01c20400 0x400 >;
|
||||
};
|
||||
|
||||
sramc@01c00000 {
|
||||
compatible = "allwinner,sun4i-sramc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x01c00000 0x1000 >;
|
||||
};
|
||||
|
||||
ccm@01c20000 {
|
||||
compatible = "allwinner,sun4i-ccm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x01c20000 0x400 >;
|
||||
};
|
||||
|
||||
timer@01c20c00 {
|
||||
compatible = "allwinner,sun4i-timer";
|
||||
reg = <0x01c20c00 0x90>;
|
||||
interrupts = < 22 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
clock-frequency = < 24000000 >;
|
||||
};
|
||||
|
||||
watchdog@01c20c90 {
|
||||
compatible = "allwinner,sun4i-wdt";
|
||||
reg = <0x01c20c90 0x08>;
|
||||
};
|
||||
|
||||
|
||||
GPIO: gpio@01c20800 {
|
||||
#gpio-cells = <3>;
|
||||
compatible = "allwinner,sun4i-gpio";
|
||||
gpio-controller;
|
||||
reg =< 0x01c20800 0x400 >;
|
||||
interrupts = < 28 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
usb1: usb@01c14000 {
|
||||
compatible = "allwinner,usb-ehci", "usb-ehci";
|
||||
reg = <0x01c14000 0x1000>;
|
||||
interrupts = < 39 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
usb2: usb@01c1c000 {
|
||||
compatible = "allwinner,usb-ehci", "usb-ehci";
|
||||
reg = <0x01c1c000 0x1000>;
|
||||
interrupts = < 40 >;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
sata@01c18000 {
|
||||
compatible = "allwinner,sun4i-ahci";
|
||||
reg = <0x01c18000 0x1000>;
|
||||
interrupts = <56>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
|
||||
UART0: serial@01c28000 {
|
||||
compatible = "ns16550";
|
||||
reg = <0x01c28000 0x400>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <1>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
current-speed = <115200>;
|
||||
clock-frequency = < 24000000 >;
|
||||
busy-detect = <1>;
|
||||
broken-txfifo = <1>;
|
||||
};
|
||||
|
||||
emac@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
interrupt-parent = <&AINTC>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@@ -0,0 +1,139 @@
|
||||
/*-
|
||||
* Copyright (c) 2014 Ganbold Tsagaankhuu <ganbold@freebsd.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
* $FreeBSD$
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "allwinner,sun7i-a20";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
interrupt-parent = <&GIC>;
|
||||
|
||||
aliases {
|
||||
soc = &SOC;
|
||||
};
|
||||
|
||||
SOC: a20 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "simple-bus";
|
||||
ranges;
|
||||
bus-frequency = <0>;
|
||||
|
||||
GIC: interrupt-controller@01c81000 {
|
||||
compatible = "arm,gic";
|
||||
reg = <0x01c81000 0x1000>, /* Distributor Registers */
|
||||
<0x01c82000 0x0100>; /* CPU Interface Registers */
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
||||
sramc@01c00000 {
|
||||
compatible = "allwinner,sun4i-sramc";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x01c00000 0x1000 >;
|
||||
};
|
||||
|
||||
cpu-cfg@01c25c00 {
|
||||
compatible = "allwinner,sun7i-cpu-cfg";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x01c25c00 0x400 >;
|
||||
};
|
||||
|
||||
ccm@01c20000 {
|
||||
compatible = "allwinner,sun4i-ccm";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = < 0x01c20000 0x400 >;
|
||||
};
|
||||
|
||||
timer@01c20c00 {
|
||||
compatible = "allwinner,sun7i-timer";
|
||||
reg = <0x01c20c00 0x90>;
|
||||
interrupts = < 22 >;
|
||||
interrupt-parent = <&GIC>;
|
||||
clock-frequency = < 24000000 >;
|
||||
};
|
||||
|
||||
watchdog@01c20c90 {
|
||||
compatible = "allwinner,sun4i-wdt";
|
||||
reg = <0x01c20c90 0x10>;
|
||||
};
|
||||
|
||||
GPIO: gpio@01c20800 {
|
||||
#gpio-cells = <3>;
|
||||
compatible = "allwinner,sun4i-gpio";
|
||||
gpio-controller;
|
||||
reg =< 0x01c20800 0x400 >;
|
||||
interrupts = < 28 >;
|
||||
interrupt-parent = <&GIC>;
|
||||
};
|
||||
|
||||
usb1: usb@01c14000 {
|
||||
compatible = "allwinner,usb-ehci", "usb-ehci";
|
||||
reg = <0x01c14000 0x1000>;
|
||||
interrupts = < 39 >;
|
||||
interrupt-parent = <&GIC>;
|
||||
};
|
||||
|
||||
usb2: usb@01c1c000 {
|
||||
compatible = "allwinner,usb-ehci", "usb-ehci";
|
||||
reg = <0x01c1c000 0x1000>;
|
||||
interrupts = < 40 >;
|
||||
interrupt-parent = <&GIC>;
|
||||
};
|
||||
|
||||
sata@01c18000 {
|
||||
compatible = "allwinner,sun4i-a10-ahci";
|
||||
reg = <0x01c18000 0x1000>;
|
||||
interrupts = <56>;
|
||||
interrupt-parent = <&GIC>;
|
||||
};
|
||||
|
||||
UART0: serial@01c28000 {
|
||||
compatible = "ns16550";
|
||||
reg = <0x01c28000 0x400>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <1>;
|
||||
interrupt-parent = <&GIC>;
|
||||
current-speed = <115200>;
|
||||
clock-frequency = < 24000000 >;
|
||||
busy-detect = <1>;
|
||||
broken-txfifo = <1>;
|
||||
};
|
||||
|
||||
emac@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
interrupt-parent = <&GIC>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
Reference in New Issue
Block a user