{get|put}_node() is not really what we want either; moved the maintenance
into the open() and free_cookie() hooks.
* This should fix driver reloading on change for drivers that have been used
before.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24135 a95241bf-73f2-0310-859d-f6bbb57e9c96
hda_stream::buffer_ready_sem was deleted but not recreated again. Moved its
maintenance to hda_stream_{start|stop}().
* Replaced snooze(10) with spin(10) because that's probably what's wanted here.
* Added hda_stream::type field.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24122 a95241bf-73f2-0310-859d-f6bbb57e9c96
putting the network "services" config file at the wrong place.
* Removed some dead code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24118 a95241bf-73f2-0310-859d-f6bbb57e9c96
* hda_widget_get_stream_support() did reference an out-of-bounds response for
the stream support parameter.
* Bit 18 in the PCM support parameter is 20bit sample support, not 18bit support.
* Enabled reporting B_FMT_FLOAT capability (not tested at all yet).
* Fixed B_FMT_FLOAT size (float is only 4 bytes, not 8).
* No longer clobbers the request_* parameters in B_MULTI_GET_BUFFERS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24117 a95241bf-73f2-0310-859d-f6bbb57e9c96
NodeMonitor.h.
* The latter will be set in "statFields" for interim updates when you have
asked to get them via the former.
* BFS now uses the B_STAT_INTERIM_UPDATE flag for sending updates to actively
written files.
* This makes us more compatible with BeOS again; if you only asked for
B_WATCH_STAT, you will now only receive a notification if the file in
question has been closed.
* Tracker now uses B_WATCH_INTERIM_STAT to always get all updates (ie.
downloading a file will update its size and modification time in Tracker
periodically during the download).
* Wether "needsTrimming" was true or not has no influence on wether or not
the size index needs to be updated in BFS - only the actual file size is
stored there, not the on-disk size.
* Added a TODO comment in Inode::WriteAt() that it would actually need to
update the size index when changing the file size, not when the file has
been closed (but that's probably too slow).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24114 a95241bf-73f2-0310-859d-f6bbb57e9c96
workspaces view can now be any view in the hierarchy.
* Added private view flag kWorkspacesViewFlag that identifies such a
view - note though, that you must not remove a view before closing or
hiding its window for now (and that you still need to set the
kWorkspacesWindowFlag, too).
* Fixed Workspaces check for valid screen coordinates; after a crash, it
managed to open its window offscreen for me.
* Added a ViewLayer method FindView() that finds a view with the
specified flags set.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24090 a95241bf-73f2-0310-859d-f6bbb57e9c96
out that buffer exchange would return more often than it actually exchanged
a buffer in hmulti_audio.
* Implemented setters for commands "format", and "channel".
* "play" now accepts a play mask to mute certain channels.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24066 a95241bf-73f2-0310-859d-f6bbb57e9c96
* A bit of refactoring to let the driver more easily accept more devices.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24062 a95241bf-73f2-0310-859d-f6bbb57e9c96
directories. Note that you need an updated "sed" (from the Haiku
repository) if you want to use that rule.
* The "Development" optional package now installs the Haiku headers
needed to build stuff (ie. "os", "gnu", and "posix"). It also makes
a symlink "be" so that we can still use the BeOS compiler with its
builtin header paths.
* Fixed AddVariableToScript for older shells that do not support '+='.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24058 a95241bf-73f2-0310-859d-f6bbb57e9c96
AddSourceDirectoryToHaikuImage work there (it currently only works on Linux).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24057 a95241bf-73f2-0310-859d-f6bbb57e9c96
utilizes the THREAD_FLAG_DONT_RESTART_SYSCALL (but only in SIGCONT
for now).
* resume_thread() is now using that flag to be compatible with BeOS.
* This fixes the Terminal hanging on close.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24045 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Right now, only already known loaded drivers will be monitored for changes;
their devices aren't republished, though, since that would cause a deadlock
in the node notification mechanism (listeners are called synchronously);
need to offload that the event handling to another thread.
* On changes of (known) driver directories, the device manager will now print
some info to the syslog.
* Fixed republish_driver() I broke recently (would skip every other node), and
moved it to the driver functions section of the devfs.cpp.
* Implemented currently unused unpublish_driver() function that would have to
be called before reloading a driver.
* If a driver is in use when it's updated, we mark it, but we don't do anything
with that info when we could.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24036 a95241bf-73f2-0310-859d-f6bbb57e9c96
* our flock::l_len was inclusive, while it's exclusive (the last byte locked
is (l_start - 1 + l_len) not just (l_start + l_len).
* F_UNLCK removes all locks of the calling process that are within the specified
region - existing locks might also cut or divided.
* Apparently, a single team can lock the same region as often as it wants.
* advisory_locking is now using a DoublyLinkedList instead of its C counterpart.
* advisory_lock now has start + end fields, instead of offset + len, it's
handier this way.
* This fixes bug #1791.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24020 a95241bf-73f2-0310-859d-f6bbb57e9c96
it has several issues, and a F_UNLCK semantic different from other OSs,
causing bug #1791.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24017 a95241bf-73f2-0310-859d-f6bbb57e9c96
name of the drivers.
* Allow driver::publish_devices() to return NULL to hint that it has no devices
to publish anymore (ie. existing devices will be unpublished in this case).
* republish_driver() now also calls load_driver() in case the driver is not
loaded.
* publish_device() and unpublish_node() now maintain the new
driver_entry::devices_published field, so we always know how many devices
a driver has now.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24016 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Right now, it even plays something, but it doesn't sound like it should
(more like noise).
* Also, the hda driver only works once, unlike the auich driver.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@24007 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the net_server leaked file descriptors for every opened session.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23987 a95241bf-73f2-0310-859d-f6bbb57e9c96
The runtime loader did not correctly resolve %A correctly with the
actual normalized program path. IOW it would not work correctly with
symlinks to applications that had their own lib directory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23986 a95241bf-73f2-0310-859d-f6bbb57e9c96
defined flag: NET_PROTOCOL_ATOMIC_MESSAGES.
* socket_send() now honours NET_PROTOCOL_ATOMIC_MESSAGES and returns either
EMSGSIZE if the data to be send is larger than net_socket::send::buffer_size,
or divides the data in appropriately sized chunks.
* This fixes sending >=64K over a TCP socket at once (TCP would just have
returned an error in that case).
* TCP now overrides the default send buffer size (to 32768 for now).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23915 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added gcvt(), ecvt(), and fcvt() prototypes to stdlib.h - they are all
marked legacy, but are still part of the POSIX standard, so we might want
to implement them if the need arises.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23896 a95241bf-73f2-0310-859d-f6bbb57e9c96
Not sure if this is the right place, Ingo might want to review that one.
* This fixes unmounting sessions of a multi-session CD, ie. the BeOS CD (it currently panics
when trying to access a device that's not there anymore - for debugging only, of course :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23894 a95241bf-73f2-0310-859d-f6bbb57e9c96
already knows this driver.
* This should also allow to have a driver in home/config/add-ons/... overlays
a driver with the same name in system/add-ons/...
* This should also fix bug #1750.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23892 a95241bf-73f2-0310-859d-f6bbb57e9c96
multi-session CDs. Maybe partitioning systems should give preference over
file systems, though.
This fixes bug #1634.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23891 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added other IDs from the graphics driver, but I need to look up
their bridge IDs before actually adding them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23881 a95241bf-73f2-0310-859d-f6bbb57e9c96
* NetBootArchive still used "agp"; replaced it with agp_gart, and added the
Intel GART module as well.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23873 a95241bf-73f2-0310-859d-f6bbb57e9c96
that doesn't look right to me (and since there is a 50 ms timeout anyway...).
* Minor coding style cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23872 a95241bf-73f2-0310-859d-f6bbb57e9c96
for finding this. This should fix bug #1734.
* Removed unused BWindow members and the temporary PrintToStream() method.
* Indentation cleanup (DirectWindow.h had some spaces instead of tabs).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23863 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added it to the image, and configured it to be used.
* Currently, it cannot transfer files over 64 KB for some reason
("Message too long").
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23843 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added sigmask() macro.
* Fixed libutil.h I broke yesterday: it's thought to add functions only if
you've included some other headers before; added the correct header guard
we're using for our sys/param.h.
* Added pidfile.c to the build.
* Fixed warning in realhostname.c, and pidfile.c.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23840 a95241bf-73f2-0310-859d-f6bbb57e9c96
(must also compare to BSD; I've looked at their sources, but I might have
missed something).
* Added sys/file.h and the flock() system call.
* common_fcntl() could forget to put back the file descriptor on some error
conditions (I guess we should introduce and use a DescriptorGetter class).
* Cleaned up fcntl.h, moved the BSD extensions S_IREAD and S_IWRITE to
sys/stat.h where they belong, and added the missing S_IEXEC to them.
* Added some more comments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23836 a95241bf-73f2-0310-859d-f6bbb57e9c96
file position in case an offset was specified.
* Reverted r23828-r23830 in File.cpp: don't fix the symptoms but the cause
of the problem (hey, that has to be in the kernel, right? :))
* Cleanup of File.cpp, removed OpenBeOS namespace.
* Moved user_fd_kernel_ioctl() to the section where it belongs to (that
function should be renamed, though).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23832 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added {get|set|end}usershell() functions.
* Define MAXLOGNAME, and L_SET, L_INCR, and L_XTND.
* The pidfile stuff in libutil.h is now included, too.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23827 a95241bf-73f2-0310-859d-f6bbb57e9c96
to fix bug #1731.
* However, it turns out that depot destruction obviously doesn't work
correctly, at least we keep partial or full slabs around when we're
using them (which causes the code to panic).
* Therefore, I've now disabled depots completely, until I find the time
to really work on that code.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23825 a95241bf-73f2-0310-859d-f6bbb57e9c96
HaikuBuildCompatibility.h; this fixes building agp_gart and the intel
extreme driver for BeOS.
* Added sockaddr_storage to HaikuBuildCompatibility.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23823 a95241bf-73f2-0310-859d-f6bbb57e9c96
* While this is not a really good idea for a lock with supposedly little
contention, but it'll fix bug #1731. I haven't tested it yet, but will
do so in a minute :-)
* I will need to rework the slab anyway so that it's possible to use it
as a replacement for our heap, and then I'll switch back to a benaphore
again.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23822 a95241bf-73f2-0310-859d-f6bbb57e9c96
for reading my commit and noticing! :-)
Using the test application I could have found that bug; that codepath is
currently not used in Haiku.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23801 a95241bf-73f2-0310-859d-f6bbb57e9c96
the GTT is not part of the stolen memory. However, the BIOS popup seems
to be - removing that page solves the flickering overlay when its buffer
contained it.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23799 a95241bf-73f2-0310-859d-f6bbb57e9c96
we now always only use the primary ring buffer.
* Removed secondary ring buffer allocation and member fields.
* Increased size of the primary ring buffer to 65536 bytes.
* The bytes per row register is computed differently for 9xx chips.
* On G33, the overlay does not need a physical address anymore, so we
don't pass B_APERTURE_NEED_PHYSICAL to the allocation anymore for that
device.
* intel_free_memory() accidently added the aperture base to the allocation
and would therefore never free any memory.
* INTEL_RING_BUFFER_SIZE_MASK was shifted one bit to the right, didn't
cause any harm with our buffer sizes, yet, though.
* With these changes, the driver runs stable on a G33 chipset (I have not
yet tested the hardware cursor, though, it might need some work, too).
The only known issue left is that overlay flickers a bit if its buffer
is partially backed up by reserved and allocated memory.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23798 a95241bf-73f2-0310-859d-f6bbb57e9c96
memory (so no memory was ever bound in that case).
* Disabled debug output in the Intel GART module.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23797 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed "physical" parameter of GART's bind_aperture() - I don't think this
be of use to anyone.
* Fixed binding/unbinding pages in the Intel GART driver; I accidently shifted
the page offset twice.
* Actually forgot handling of allocated memory in Aperture::BindMemory().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23796 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The kernel now opens up to 8 debugger modules (and puts them into an array;
maybe we'll want to switch to a doubly linked list when there is the need).
* Implemented an example debugger module that prints a stack trace of the
current thread when the kernel debugger is entered (not included in the
image).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23794 a95241bf-73f2-0310-859d-f6bbb57e9c96
that. This fixes bug #1475.
* Now accepts file arguments (will pick a random one out of them) as fortune
sources.
* Minor cleanup and simplifications.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23788 a95241bf-73f2-0310-859d-f6bbb57e9c96
instead of rl_delete for the delete key. That was one reason for bug #1495.
* The other one was that an inputrc file at /etc was ignored, the bash would
only check for ~/.inputrc. If changed that now such that if ~/.inputrc could
not be read, /etc/inputrc is tried.
* Both of these changes close#1495.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23783 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Since it didn't check if any mouse button was pressed at the time it was
called, it would still initiate a drag, and thus caused bug #1710.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23782 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now uses the AGP GART module for memory management. This greatly simplifies
the memory handling, and memory is now actually allocated on demand,
instead of a fixed size (stolen memory is not freed, though).
* The Intel GART module should now also work with older chipsets.
* No longer remove the GTT size from the stolen memory; this appears to have
been a mistake in the X driver. Not sure about the BIOS popup yet.
* The AGP module (in combination with the Intel GART module) is now mandatory
to use the Intel driver.
* Removed now superfluous settings (like memory size). Only enabling/disabling
the hardware cursor is still supported.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23781 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Debug output now defaults to on (much more useful for debugging...)
* The receiver now stops when it got 0 bytes (signals peer is closing the
connection).
* The random reorder stuff did not work correctly.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23775 a95241bf-73f2-0310-859d-f6bbb57e9c96
also used in BindMemory() and UnbindMemory() - before the latter two were
just not working correctly for memory in the reserved region.
* The Aperture destructor now also frees (and unbinds) all still existing
allocations.
* Aperture::fFirstMemory was not initialized.
* Added some more debug output.
* BindMemory()'s vertical to physical address translation didn't work correctly.
* alignment must be at least B_PAGE_SIZE in _Insert().
* bind_aperture() needs to pass the B_APERTURE_NON_RESERVED flag to
CreateMemory().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23774 a95241bf-73f2-0310-859d-f6bbb57e9c96
* It now also serves as a generic GART manager and accepts bus modules as well
as custom modules of graphics drivers if they want to (could be used for the
Radeon PCI GART stuff, for example).
* Implemented GART support module for Intel i965 and G33 chipsets (the other
Intel chips will come later).
* Renamed agp bus manager to agp_gart to reflect its new functionality (even
though the AGP functionality is already outdated (due to PCIe), the GART
stuff remains current).
* Adapted existing users of the AGP bus manager to the API changes.
* Not very well tested yet...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23754 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some defines needed when playing with the bridge controller.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23753 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer (as needed by the G33 chipset).
* Minor debug output improvements.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23739 a95241bf-73f2-0310-859d-f6bbb57e9c96
* set_gtt_entry() used the wrong index to fill the GTT - this could have never
worked correctly when you specified more memory than the amount of stolen
memory.
* Implementing maintaining resources for emulating overlay using the 3D engine
on i965. I don't yet commit the actual overlay code, as that is a) ugly, and
b) does not work yet.
* Moved AreaKeeper into its own header.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23709 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Our behaviour differs a bit from how BeOS handles those windows, added a
comment to the code which explains that, and how we could change it if we
really wanted to.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23705 a95241bf-73f2-0310-859d-f6bbb57e9c96
the command would overwrite its own output, not always on the bottom of the
screen.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23699 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added block_writer thread that continuously writes back blocks for all current
block caches.
* A block cache now maintains the number of dirty blocks if it doesn't use
transactions. That knowledge could also be used in block_cache_sync()...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23698 a95241bf-73f2-0310-859d-f6bbb57e9c96
* This should speed up writing a transaction considerably.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23694 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the public hash_grow() function again (at least for now, it's only
private).
* Removed the newSize argument from hash_grow(); it will compute the new size
automatically.
* The block cache is now using hash_insert_grow() instead of hash_insert()
which should make hash lookups much faster with some 10 thousand blocks,
also increased the initial table size from 32 to 1024...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23692 a95241bf-73f2-0310-859d-f6bbb57e9c96
when the view is detached, fRenderer has already been released, and wouldn't
unlock the looper anymore in GLTeapot. This fixes bug #1626.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23691 a95241bf-73f2-0310-859d-f6bbb57e9c96
already using.
* We don't have to try posting _QUIT_ more than once, as it cannot block; the
looper is local, so direct message passing is used in this case.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23690 a95241bf-73f2-0310-859d-f6bbb57e9c96
volumes root directory when trying to unmount it. This fixes bug #1694.
Thanks to Ingo for investigating this! :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23685 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_cache_write_modified() here anymore since quite some time, it actually
doesn't make any sense to call the file system's "fsync" method here.
This should make syncing all file systems much faster when many vnodes are
in use.
* If a file system doesn't use the file cache, it can still just sync everything
it needs to in its "sync" method.
* Added a TODO item on how to improve sync speed further, if necessary.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23679 a95241bf-73f2-0310-859d-f6bbb57e9c96
in question as it used to find the view that is under the mouse (found
during a short phone session with stippi :-)). This fixes bug #1714.
* The local view clipping is still not correctly maintained by the
app_server, but that only affects the drawing now. I've added some
commented out code that give you some visual feedback on this problem
(ViewLayer::MarkAt()).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23663 a95241bf-73f2-0310-859d-f6bbb57e9c96
parent node could temporarily get invalid (ie. CheckNode() would
fail).
* Since shrinking the stream was done in edge cases only, anyway, we
will no longer do that which works around the problem. This fixes
bug #1716.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23656 a95241bf-73f2-0310-859d-f6bbb57e9c96
dump a B+tree header resp. node.
* Use dprintf() when a transaction is too large instead of a panic; even
though the file system has to revert the transaction, it's not lethal,
and it does not corrupt your disk.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23653 a95241bf-73f2-0310-859d-f6bbb57e9c96
new size fell on a block boundary.
* Removed newline from Inode::Remove() tracing.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23652 a95241bf-73f2-0310-859d-f6bbb57e9c96
"block_cache" to dump info about transactions.
* Improved tracing.
* Now uses the new add_debugger_command_etc().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23644 a95241bf-73f2-0310-859d-f6bbb57e9c96
caused old entries (that were part of the same transaction) to be
overwritten.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23642 a95241bf-73f2-0310-859d-f6bbb57e9c96
code:
- The vec array to contain the block list and the index block was one entry
to small.
- But that didn't really matter, as RunArrays/run_array was broken and never
put anything into the log; we only ever wrote index headers. BFS would
totally screw up the disk when trying to replay the log (even though the
replay code itself was and is working fine).
- If a log entry ended at the end of the log area, BFS could overwrite the
first block after the log with the next entry.
* run_array now adopt the sorting stuff from the sorted_array. Blocks in the
log are now always sorted.
* Added TODO item to sorted_array as it's not endian safe (will only work
correctly when BFS is used in the native endian).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23638 a95241bf-73f2-0310-859d-f6bbb57e9c96
we use a uint16 size internally (and that has to include the length of
the trace_entry structure, too.
* We now track how many entries have been written to the log during the
runtime.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23613 a95241bf-73f2-0310-859d-f6bbb57e9c96
blocks into the new transaction, but it would set that transaction on all
blocks of the old transaction, too. Also, it did not correctly update the
num_blocks/sub_num_blocks fields of the old transaction. Even worse, it did
return B_OK instead of the ID of the new transaction...
* get_writable_cached_block() did not correctly maintain the number of blocks
in the sub transaction.
* write_cached_block() did not free the original_data of a block when it wrote
it back as part of a previous transaction.
* Changed "cookie" for cache_next_block_in_transaction() to "long", so it will
be 64 bits when needed.
* Improved the API for detaching sub transactions: you can now get the blocks
of only the main (parent) transaction as well, added new
cache_block_in_main_transaction() function.
* BFS now flushes the log when there is no space left for the current
transaction.
* _WriteTransactionToLog() allocated a "vecs" array, but never freed it.
* _WriteTransactionToLog() now also supports detaching the current sub
transaction if the whole thing is getting too large (it will now also panic
if that doesn't work out).
* Removed a useless optimization: making the blocks available in the cache
isn't really needed, as all blocks in a transaction are locked into the
cache, anyway.
* Implemented Transaction::WriteBlocks().
* Minor cleanup, removed some dead code, fixed warnings in the fs_shell's
block_cache when compiled with debug output on.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@23610 a95241bf-73f2-0310-859d-f6bbb57e9c96
Axel Dörfler