This means that the usb_callback_func now takes a status_t instead of a uint32 status.
Also the error codes are now different. I don't see this as a real problem in binary compatibility, as the status codes were never really documented and most drivers just assumed that a nonzero status meant an error.
Source compatibility breaks for callback functions and error defines. I fixed (hopefully) all places in the tree that are currenty included in the image and affected by the change.
* Corrected error reporting in UHCI and EHCI using the new status codes.
* Fixed a memory leak in EHCI where the async advance interrupt was not triggered in time.
* Fixed another race condition in usb_raw that could cause a crash when a device is removed while a transfer is pending.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18916 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed endpoint halt clearing. The data toggle has to be reset when we clear a stall.
* Now using up to B_PAGE_SIZE * 4 sized buffers in EHCI. They are split automatically by the host controller. This further pushes throughput.
* Optimize memory allocator settings for the above case. Enlarging it's managed space to 1MB
* Ignore the transaction error bit in EHCI. It is only of informational character as it also idicates errors that were recovered automatically. If an unrecoverable error occures, other bits will indicate this.
* Fixed some more print formats in debug output.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18915 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed warnings when debug output is on
* Disabled debug output
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18913 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed SetFeature/ClearFeature/GetStatus for interfaces by adding the respective interface number
* Added driver rescanning mechanism (taken from bin/rescan)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18912 a95241bf-73f2-0310-859d-f6bbb57e9c96
This fixes crashing of the USB Mass Storage driver under R5. It is fully working there now.
I hope to be able to do this more cleanly under Haiku though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18894 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Cleaned interrupt handlers for both busses, too.
* Fixed memory leak of the queue head stray descriptors in EHCI.
* Fixed warnings about assigning NULL to the module flags field.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18857 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented actual length calculation in EHCI
* Implemented bulk transfers in EHCI
* Implemented queue freeing in EHCI
* Added extended buffer pointers to the EHCI structs, necessary when the controller supports 64bit
* Fixed debug output and removed warnings due to wrong print format
Control and bulk transfers are now working nicely for EHCI. This means that I can now get pictures from my camera with USB 2.0 speed. Note though that many things still are unimplemented (isochronous transfers, split transactions, interrupt transfers, queue chaches per pipe, ...). But it's certainly a nice step forward :-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18855 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implementing control and bulk (async) transfers. They don't work yet though.
* Corrected the legacy support handling in EHCI
* Fixed the bit mask for total bytes in qTDs and added the data toggle bit
* Changed the boolean low speed flags to usb_speed enum that allows for low, full and highspeed
Also wrote a memory allocator that takes over memory management from the stack. It is similar to a buddy allocator. This does on the one hand remove some ugly code from the stack and is on the other hand far more scalable than the previous free list approach. This scalability is needed for proper EHCI support where buffers can go up to a size of 5 pages. The allocator is not perfect and it's memory overhead is quite high compared to the managed memory (depends on the managed block sizes), but it's quik and works well so far.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18849 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Don't inherit Device and Interface from pipes anymore. The device has a default pipe member now.
* Since the parent of each Object is now known, we can send control messages using the default pipe of the device from all attached elements (pipes and interfaces).
* Fixed the generic {Set|Clear}Feature() and GetStatus() calls to include the endpoint address for pipe specific requests.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18710 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the usb module accordingly. Isochronous is all still left ToDo though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18700 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Implemented the EHCIRootHub
* Reworked UHCIRootHub to be more of a utility class and moved the actual work into the UHCI BusManager
* Implemented port reset in EHCI. Ports with low and fullspeed devices are now correctly handed over to the companion host controller.
Attachs and detachs as well as port resetting / enabling works now in EHCI. Only the actual data transfers are missing thereafter ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18656 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added individual register operations for operational and capability registers
* Added resetting the host controller which appearantly actually works
Note that you shouldn't install the ehci module if you want uhci to work.
It disables the companion host controller drivers (uhci and ohci) because it takes port ownership and does not yet give it back for low and fullspeed devices.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18648 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed warnings
* Some cleanup
* Added myself as an author to some files
No functional changes.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18614 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Rewrote both headers on the way.
* The usb module now exports both, the v2 and v3 module_info.
* Changed the internals of the USB Stack to give out usb_ids instead of opaque handles to internal classes.
* Cleaned up some more of the Stack by moving members into other classes and removing unused stuff.
* Updated the usb_raw driver from v2 to v3 API.
Since both usb_hid (which still uses the v2 API) and usb_raw (which now uses the v3 API) work, I'd call it a success ;-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18539 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reduced the Transfer class to a minimum and removed support for synchronous transfers. The only usage of this is in SendRequest(), which now provides a callback and QueueRequest()s it's request instead.
* Clarified semantics of SubmitTransfer(). It returns a status_t indicating wether the transfer was submitted successfully. This includes no information about the outcome. Therefore the UHCI RootHub now reports the status only through the callback and returns B_OK or B_ERROR for SubmitTransfer().
* Added comment to the Transfer class explaining who takes ownership of the Transfer in which cases.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18511 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved convenience endpoint requests from ControlPipe to Pipe
With this change, bulk transfers are fairly stable now. See here for evidence: http://haiku.mlotz.ch/haiku-usb01.png ;). Those are pictures from my Canon Digital Ixus 750 downloaded with Exposure using the PTP plugin. I of course navigated Haiku with my USB Logitech iFeel mouse which works nice since some days.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18510 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed reported power status of the UHCI Root Hub
* Added preservation of the SOF_MODIFY register when doing a global reset of the UHC
* Read out the actual length for outgoing transfers too
* Made actual length handling for transfers a bit safer and correct in respect to NULL packets
* Use short packet detect to handle short packets
* First step at implementing the hub interrupt
Since the devices are now configured correctly, some bulk transfers actually work. Also my hub now reports its status correctly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18506 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed some debug output from UHCI
* Added some debug output to the usb module instead ;)
* Rewrote the way new devices are attached and ports are handled (now more similar to FreeBSD)
* Corrected handling of port resets so that they should work on hubs too
* Cleaned up some headers
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18499 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed the UHCI root hub and the hub implementation. Interface and endpoint descriptors are part of the configuration descriptor, they cannot be requested individually.
* Added simple support for interrupt and bulk transfers to UHCI. It's enough to get my USB mouse working to a stable and usable degree.
* Cleaned up and reworked some other parts, added allocation checks and such.
Yes, my internet connection is back up :)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18496 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Moved the transfer descriptor management into the UHCI class
* Added locking to the driver and the queues
* Added service thread for finished transfers (to be implemented correctly)
* Cleaned up some headers and added myself as author
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@18245 a95241bf-73f2-0310-859d-f6bbb57e9c96
The bus_manager files were compiled but were not used for linking the "usb" bus_manager module.
I only found this out by looking at the binary and finding strange strings that were for sure not in the USB stack.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17679 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed all friends in the USB stack classes (as they are not needed)
* Added max packet size to the pipe and respect it on transfers
* Use pipes with the same speed as the device
Device descriptors can now also be retrieved from full speed devices and devices with a packet size of more than 8 bytes. The devices are also correctly initialized to their default configuration.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17639 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added debugging facilities
* Implemented the data stage of control messages
The device descriptor can now be successfully retrieved. Now interrupt, bulk and isochronous data transfers need to be implemented.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17623 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Introduced a Queue class that manages itself and where transfers are attached to
* Added "set feature" to the roothub and use it to enable the port of new devices
It is now possible to successfully detect new devices and send at least one transfer descriptor to them.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17615 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed some copy&paste errors I introduced earlier
* Removed the "one UHCI bus only" limit
* Other fixes
The hub now sees when a new device is connected but failes when getting its descriptor.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@17611 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Extended ConvertBits() to properly handle negative offsets and overlapping lines
* Implemented blitting the software cursor to the bitmap returned from ReadBitmap()
Note: In the future we will have to directly use the final graphics buffer for ReadBitmap() if we want DirectWindow output too (R5 includes it). I don't know how R5 handles the hardware cursor though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16766 a95241bf-73f2-0310-859d-f6bbb57e9c96
This will allow to fix message related problems like drag and drop and scripting.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16708 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added some comments
* Added some checking to avoid noop shifts
* Added buffer length checks
* Implemented (as Stephan suggested) a version of ConvertBits() that takes offsets.
This new version allows to move a region of the source into a region (possibly not at the same point) on the dest while converting colorspaces on the fly.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16592 a95241bf-73f2-0310-859d-f6bbb57e9c96
I've put it into ColorConversion.cpp and moved PaletteConverter there too, cleaning up Bitmap.cpp.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16580 a95241bf-73f2-0310-859d-f6bbb57e9c96
Colorspace conversion is not done yet so that it only works correct in 32bit modes.
Also drawCursor is not respected yet. Partially fixes bug 197.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16573 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added more char codes to is_white_space(), should be all I think
Sorry if I stepped on your toes Stephan, but I wanted these changes flushed before I leave for holidays :-).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16501 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reordered some functions
* Area messages can now be unflattened instead of using the private _Reference and a special port code
Passing by area is now mostly working but it's not yet enabled. I will have to conduct performance tests first to see if and starting at what messagesize the overhead is reasonable.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16500 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added checksum generation and checking
The data itself is now checksummed too (unlike R5 where only the header gets a checksum). This might be a performance problem for larger messages. Opinions?
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16482 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed the FaceGetter as it was only needed for locking
* Cleaned up TruncateString()
* Fixed a typo in moreUTF8.h
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16252 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Reworked functions like GetEscapements(), GetBoundingBoxesAsString() and GetGlyphShapes() completely
* Made the ServerFont functions uniform in their prototypes and cleaned out unnecessary arguments
* Added new UTF8 handling functions to moreUTF8.h that are now used by ServerFont
* Put the common transformations of the FT_Face into an own GetTransformedFace() to lessen code duplication
In other words, ServerFont is now cleaned and handles UTF8 pretty efficiently. Some ToDo's are still left though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16241 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed GetEscapements() to return the correct values
* Corrected and enabled the rotate / shear transform for GetGlyphShapes() and GetEscapements()
The Iterview sample code demo is now working. If you play with it a bit you can also rotate the text.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16232 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed the allocation to new for GetGlyphShapes() and GetEscapements() as the data is deleted in ServerApp.cpp
* Minor cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@16231 a95241bf-73f2-0310-859d-f6bbb57e9c96
Michael Lotz
