* Rewrote TextView.h
* Renamed all private methods to have the underscore prefix.
And also:
* Whitespace and line width cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22688 a95241bf-73f2-0310-859d-f6bbb57e9c96
The low memory handler now has two passes which should help there; however, it
might also accidently remove recently used vnodes, too. We could mark the clean
ones in some way if that turns out to be a problem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22678 a95241bf-73f2-0310-859d-f6bbb57e9c96
BufferQueue::Add() tried to remove a negative amount of bytes. This could
bring a download to a complete halt (as could the other one due to the list
link mixup).
* While the RTT computation still seems to work not that good (with a drop quote
of 50% I would easily reach retransmit timeouts of 80 secs), TCP should now
work a lot better on a flaky connection.
* Renamed _GetMSS() to _MaxSegmentSize().
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22677 a95241bf-73f2-0310-859d-f6bbb57e9c96
next/prev link order - that messed up the DoublyLinkedListCLink adapter.
* Since it's more likely that someone messes with the C version, the C++ version
now uses the same order than that one.
* This fixes a bug when TCP's BufferQueue tried to iterate over a list, messing
up its integrity.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22676 a95241bf-73f2-0310-859d-f6bbb57e9c96
indirectly by the stack - they are now again usable separately as well.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22673 a95241bf-73f2-0310-859d-f6bbb57e9c96
1) Some video modes which did not work properly with the Savage chips
have been removed from the mode list, and a few wide-screen modes which
work have been added.
2) The code which loads the cursor image has been simplified. This code
is similar to the code I'm using in the S3 Virge video driver which I
will be submitting to the Haiku project in a few days. This change also
removes the last piece of code that came from Erdi Chen's BeSavage
driver; thus, this diff file also removes his copyright from the file
savage_cursor.c.
I did a minor modification to fix a warning in ProposeDisplayMode.c (it
now includes savage.h). Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22670 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added a way to initialize built-in dependencies that the tcp_shell is now
using - at least it gets to the prompt again (it still doesn't work, though).
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22669 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Got rid of the PARAMS_AS_STRING stuff (it's always defined, anyway).
* Will remove BeOS support, too, in the future.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22644 a95241bf-73f2-0310-859d-f6bbb57e9c96
This should help to reduce the number of warnings imported code will throw
during compilation (helps a lot with tcpdump, for example).
* Since long is 64 bit on 64 bit platforms, we might want to think about doing
that change for the Haiku types int32 and uint32 as well.
* Fixed several occurences of hidden type problems.
* Fixed build of the stack and TCP under BeOS.
* Fixed incorrect typedef in socket_interface.h.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22643 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Named settings are only overwritten if they were an exact match (ie. it's
the very same monitor).
* The unnamed settings retrieval now has two passes, on the first it will
now ignore named settings. It will also only remove unnamed settings now.
* Added some TODO commments.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22632 a95241bf-73f2-0310-859d-f6bbb57e9c96
still look for it in the SVN history if you like.
* Moved tcp_tester.cpp to its own sub-directory tcp_shell - it doesn't yet
build, though (due to recent changes to the stack/TCP implementation).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22631 a95241bf-73f2-0310-859d-f6bbb57e9c96
just the frequency.
* Previously saved modes are no longer supported, though.
* Screen modes are now stored with the monitor info it belongs to, IOW the
app_server will now choose a mode from the settings that fit your monitor
description. Driver support is required for this to work as intended.
* The changes are completely untested at this point, though, sorry (shouldn't
harm anyone, though) :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22622 a95241bf-73f2-0310-859d-f6bbb57e9c96
status checker now only tries to lock the manager, it won't wait anymore.
* Added MediaChanged() and UpdateMediaStatusIfNeeded() methods to KDiskDevice.
* KDiskDeviceManager::_CheckMediaStatus() now uses these new methods; it should
no longer detect removed media more than once :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22621 a95241bf-73f2-0310-859d-f6bbb57e9c96
through our revisions, I found r20883 to be the cause of this problem.
This one obviously fixed bug #1185, but I'm afraid there has to be another
solution for this problem.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22617 a95241bf-73f2-0310-859d-f6bbb57e9c96
* in r22410 the unlock/relock was removed accidently from ServerWindow::_Hide()
before calling a desktop method.
* Desktop::ActivateWindow() no longer calls SetWorkspace() with the window lock
held.
* WorkspacesLayer::MouseUp() now uses the asynchronous version of SetWorkspace().
* AFAICT AS_HIDE_WINDOW, AS_SHOW_WINDOW, and AS_MINIMIZE_WINDOW don't need the
all window lock, reverted to standard single window lock.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22614 a95241bf-73f2-0310-859d-f6bbb57e9c96
working with it. The app_server would have crashed before if a graphics driver
could directly return a preferred display mode.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22595 a95241bf-73f2-0310-859d-f6bbb57e9c96
will happen on earlier i9xx chips for now...). Not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22589 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed Background.h - to be replaced by the one in be_apps (which has OT license)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22579 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Use strlcpy() to copy the confstr instead of strncpy().
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22565 a95241bf-73f2-0310-859d-f6bbb57e9c96
accelerant (or the app_server via EDID info). It's still experimental
API, and opinions are welcome.
* Moved BPrivateScreen into the BPrivate namespace.
* Rewrote Screen.h.
* Introduced a BScreen::GetMonitorInfo() method, and implemented it in the
app server as well (ie. AS_GET_MONITOR_INFO).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22563 a95241bf-73f2-0310-859d-f6bbb57e9c96
and van Flandern (1968), instead of those inefficient loops we had before.
Thanks!
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22557 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Added an inputrc to the image that should have the same effect as the recent
bash readline default changes for other apps that use readline.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22553 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Now supports the new B_GET_EDID_INFO hook under Haiku.
* Fixed build under BeOS.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22551 a95241bf-73f2-0310-859d-f6bbb57e9c96
implemented; it now only returns wether or not the window is part of the
list specified by the index. This fixes bug #195 and #1553.
* HasInSubset() would report "true" for app-floating windows vs. modal app
windows which was wrong.
* Removed SameSubset() as it isn't needed at all.
* SubsetWorkspaces() now take the front window into account for floating
windows.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22549 a95241bf-73f2-0310-859d-f6bbb57e9c96
the accelerant, as well as its EDID info. B_GET_PREFERRED_DISPLAY_MODE and
B_GET_EDID_INFO are both optional. The preferred mode will be taken from the
EDID info if only the latter hook is implemented, or the former returned an
error.
* Currently, the app_server should correctly set the preferred mode on start,
but no accelerant supports that yet, so it's not really tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22520 a95241bf-73f2-0310-859d-f6bbb57e9c96
to create their mode list. Once it's done, it should cover all possible cases,
and allow the base mode list to reside in the app_server (under Haiku, at least),
so that all drivers will benefit from an updated list.
Right now, it might already work to a degree, but it's not yet tested.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22517 a95241bf-73f2-0310-859d-f6bbb57e9c96
not work; it would always choose the last thread of the current priority.
IOW a thread was never skipped, and lower priority threads were never called
when a higher priority thread was running - from the POV of the scheduler,
we only has real time threads...
* Improved "run_queue" KDL output.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22515 a95241bf-73f2-0310-859d-f6bbb57e9c96
of the kernel directly, and emulates the kernel's API where necessary.
Not complete at all yet, but I already found one serious bug in our current
scheduler with it :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22513 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Removed old port test code, it doesn't belong there.
* Cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22507 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_page_reserve_pages() and vm_page_allocate_page() will now steal pages from
the inactive queue as needed.
* We currently never steal active pages anymore, but this might need to be
revised later (therefore, the page scanner never waits anymore, but uses
mutex_trylock() to lock a cache).
* The page scanner and writer now both run at normal priority - let's see how
that will work out.
* Introduced an inactive queue.
* Instead of shuffling pages around in the queue (and therefore destroying LRU)
the page stealing mechanism now uses a marker page to be able to release the
page lock without losing its position in the queue.
* The page writer now always grabs the whole release count of the semaphore, so
that there won't be a huge backlog to catch up with.
* vm_page_num_free_pages() now also includes the inactive queue as well as the
reserved pages (they are no longer regarded as free pages).
* Added a insert_page_after() function that inserts a page after another one,
needed by the marker code.
* clear_page() now gets a vm_page instead of a physical address which simplified
some code.
* Removed superfluous initialization of the queues (if those aren't zeroed on
start, we would have serious problems, anyway).
* Removed old and unimplemented dump_free_page_table() ("free_pages") KDL
command.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22506 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Fixed warnings with debug output turned on.
* Shuffled functions around a bit.
* Minor cleanup.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22504 a95241bf-73f2-0310-859d-f6bbb57e9c96
vm_remove_all_page_mappings() all computed the wrong virtual address for the
page in question, and would therefore return incorrect data!
Introduced a virtual_page_address() function that is now used by all of them.
So that's why we were still "losing" modified flags - it took me some hours
to find those (sometimes processes died after stealing pages)...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22498 a95241bf-73f2-0310-859d-f6bbb57e9c96
it intended to. That resulted in more writable pages where you wouldn't want
them (ie. allowing the area to change pages in lower caches).
* We were losing modified pages: vm_unmap_pages() sometimes has to preserve
the modified flag (eg. when called from page fault).
* Both of these were responsible that stealing active pages would crash
applications - even if less likely, this could also have happened when
stealing inactive pages. Therefore, I've activated stealing active pages
again.
* The page writer now pushes the pages of busy vnodes to the end of the queue,
so that it won't pick them up again too soon (the vnode destruction would
be in the process of writing those pages back, anyway).
* The page thief now triggers the page writer to run once it has to steal
active pages. This might be a bit too aggressive, though.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22495 a95241bf-73f2-0310-859d-f6bbb57e9c96
pages to reserve, which could result in to few being reserved in certain
situations.
* Use MutexLocker where appropriate.
* Reordered includes following the new rules.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22494 a95241bf-73f2-0310-859d-f6bbb57e9c96
* uname() now calls gethostname() instead of using a hard-coded value.
* This fixes bug #1250.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22492 a95241bf-73f2-0310-859d-f6bbb57e9c96
the blue screen was initialized - blue_screen_enter() now returns wether
or not it has been initialized already (there will only be serial output
in that case).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22491 a95241bf-73f2-0310-859d-f6bbb57e9c96
Alternatively, we could add an inputrc file - this would have the advantage
that other apps using readline built-in would have those, too.
OTOH this really should be in the defaults, too, IMO (ie. we could do both).
Opinions welcome :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22488 a95241bf-73f2-0310-859d-f6bbb57e9c96
* The page_thief() will no longer steal any pages in B_LOW_MEMORY_NOTE state,
only in the more serious cases.
* I've disabled stealing active pages for now again; there seem to be some
problems with it (either with how we do it, or with other stuff).
* vm_page_schedule_write_page() now always releases the page writer semaphore,
resulting in many more written pages - this isn't optimal as long as there is
no I/O scheduler, but before it was much too rare when there are many dirty
pages.
* Customized the thread priorities a bit to make the page scanner/thief/writer
experience a bit nicer with our current scheduler.
* vm_page_reserve_pages() would return too early, it did not test if really
enough pages are free.
* Under certain circumstances, the wakeup from vm_page_reserve_pages() did not
work - we now always notify in vm_page_unreserve_pages() to work around that
problem.
* Checked if the page reservations are done when needed and are always balanced
for the whole kernel.
* vm_page_allocate_page() now panics if it can't deliver a reserved page.
* vm_page_allocate_page_run() can no longer steal reserved pages.
* With all of those changes, I could finally copy a file in emulation, ie. the
Luposian bug should finally be fixed, even though the system might still not
be perfectly stable under low memory. Will do some more testing.
* write_page() no longer prints something on failure.
* Dumping a whole page queue will now also write the cache type of each page.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22486 a95241bf-73f2-0310-859d-f6bbb57e9c96
busy vnodes.
* dir_create_entry_ref() used get_vnode() incorrectly (and could therefore
potentially prevent a file system from doing proper locking when called
from the kernel).
* The vnode_store now uses this for its acquire_unreferenced_ref()
implementation (and therefore for the page writer).
* read_into_cache() and write_to_cache() were still marked inline.
* The system will now wait 10 secs for a busy vnode before returning an error.
* It will also no longer panic in that case.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22485 a95241bf-73f2-0310-859d-f6bbb57e9c96
* vm_low_memory_state() now periodically recomputes the state in case the
low memory thread is waiting for something.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22483 a95241bf-73f2-0310-859d-f6bbb57e9c96
problem of BMenuItem::SetTrigger() that got fixed in r22476 (see bug #1506 for
the details).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22477 a95241bf-73f2-0310-859d-f6bbb57e9c96
allocate with the vm_cache locked - this is necessary to be able to steal pages
from itself (large files...).
The system doesn't actually lock up anymore, but it still renders itself unusable;
obviously the page thief does not work correctly, yet. The rest of the experience
is created by our current scheduler (the page thief runs and runs, but it doesn't
free any pages anymore).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22466 a95241bf-73f2-0310-859d-f6bbb57e9c96
twice into the same cache: cache_io() called read_into_cache() (or
write_to_cache()), and that broke down the request into smaller parts.
It then called read_chunk_into_cache() (or write_chunk_to_cache() resp.)
to actually allocate pages and fulfill the request.
However, it needed to unlock the cache for each chunk, and in the mean
time someone else could insert pages into the remaining chunks.
* Now, cache_io() already takes care of chunking the data which makes this
approach safe, and also simplified the code a bit - read_into_cache()/
write_to_cache() are gone now. I've renamed read_chunk_into_cache() to
read_into_cache() (same for the write function).
* Also got rid of that goto in that function while I was on it.
* Disabled cache_prefetch_vnode() for now (it's similar to cache_io(), but
since it's currently not used [since no cache module is installed yet],
I didn't want to go through updating it now, too).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22465 a95241bf-73f2-0310-859d-f6bbb57e9c96
* his has to be used by the page writer to make sure the vnode is still valid.
* This should have been the final nail on the Luposian bug - I haven't tested
it yet, but we'll certainly see :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22462 a95241bf-73f2-0310-859d-f6bbb57e9c96
heap is going away soon, it doesn't hurt to have it in the repository.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22457 a95241bf-73f2-0310-859d-f6bbb57e9c96
interfere with the page thief, we always need to have reserved a page for
this upfront. I introduced a function to the vm_translation_map layer that
estimates how much pages a mapping might need at maximum. All functions that
map a page now call this and reserve the needed pages upfront.
It might not be a nice solution, but it works.
* The page thief could run into a panic when trying to call vm_cache_release_ref()
on a non-existing (NULL) cache.
* Also, it will now ignore wired active pages.
* There is still a race condition between the page writer and the vnode
destruction - writing a page back needs a valid vnode, but that might just
have been deleted.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22455 a95241bf-73f2-0310-859d-f6bbb57e9c96
(currently, wired pages don't always have the PAGE_STATE_WIRED, but a
wired_count).
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22449 a95241bf-73f2-0310-859d-f6bbb57e9c96
the unmapped page.
* This is needed by everyone who calls this to make sure modifications to a
page aren't ignored. Namely, the page scanner and the page thief were
affected.
* Cleaned up locking the page's cache a bit in page_thief(); there is now
a helper class that takes care of everything.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22438 a95241bf-73f2-0310-859d-f6bbb57e9c96
* the page writer don't allow to block, while all other writers do. This fixes
bug #1509. The reason the page writer needs this is because it marks several
pages from different caches as busy.
* Fixed a warning about ASSERT being defined already in BFS, since
util/DoublyLinkedList.h now includes debug.h.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22434 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Changed ResAttr rule to allow not deleting the file before writing the
attributes.
* Added application signatures for the runtime_loader and zbeos, just so that
they may have an icon, too (hint, hint) :-)
* As a side effect, this also let's FileTypes handle these two as apps (even
though they aren't), so that I can close bug #606.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22412 a95241bf-73f2-0310-859d-f6bbb57e9c96
pointer - which it now handles gracefully.
* This also fixes starting the runtime loader directly: it no longer crashes
but will just return an error.
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22409 a95241bf-73f2-0310-859d-f6bbb57e9c96
* Check safemode settings only when it's not already disabled (doesn't make
sense to check those then).
* Minor cleanup
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22408 a95241bf-73f2-0310-859d-f6bbb57e9c96
a second time would magically work, as it skipped its initialization then...
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22405 a95241bf-73f2-0310-859d-f6bbb57e9c96
could be written back. This should stop the page thief from stealing active
pages that cannot be recreated easily :-)
git-svn-id: file:///srv/svn/repos/haiku/haiku/trunk@22404 a95241bf-73f2-0310-859d-f6bbb57e9c96
Axel Dörfler